Spring 1-3KVAHigh Performance Line-Interactive UPS

with Pure Sinewave Output

High power density UPS with 0.9 load power factor

Rotatable LCD display with 2-colors indicating for operating

Pure Sinewave Output in less than 3% THD

2U Rack-Tower 2-in-1 with internal battery

Easy battery replacement and backup time extention

Auto Self-monitoring and diagnosis

Load segments control for outlets

Energy Saving function

Settable Line sensitivity and parameters

EPO connector for Emergency Power Off

Main Features Series –Features

MODELSpring 1KVA

Spring 1.5KVA Spring 2KVA Spring 3KVA

CAPACITY VA/W 1000VA/900W 1500VA/1350W 2000VA/1800W 3000VA/2700W

INPUTNominal Voltage 220/230/240VAC

Voltage Range184-276VAC (Standard Mode /

161-276VAC (Wide Mode)

OUTPUT

Voltage 220/230/240VAC

Voltage Regulation Battery Mode: +/-5% Typical

Frequency 50Hz or 60Hz

Overload CapacityLine Mode: 110%: 3m ; 110%-150%: 10 cycles

Battery Mode: 110%: 30S ; >120%: 5 cycles

Output THDv Linear Load: 3%, Non-Linear Load: 6% (Before low battery)

Output Waveform Pure Sine-wave

BATTERY & CHARGER

Charger Type Three Stage Profile (CC/CV/Floating)

Charger Current 1.5A for Standard mode

Battery Type 12V/7AH x3 12V/9AH x3 12V/7AH x6 12V/9AH x6

Full Load Backup Time

4’50” 2’40” 4’50” 2’40”

TRANSFER TIME Typical 2-6ms Typical

EFFICIENCYLine mode >97%

Battery Mode >80%

INDICATOR LCD Display User Friendly LCD Display

PHYSICALDimension (DxWxH) 430 x 86.5 x 438 mm 600 x 86.5 x 438 mm

Net Weight (kgs) 16Kg 22Kg 30Kg 41Kg

ENVIRONMENTOperating Environment

0- 40°C, 0-90 % relative humidity (non-condensing)

Noise Level Line mode: 45 dB, Battery mode:50 dB

Data-Sheets Series – Specification

Front and Back Viewing 1-3K

LS1OUTPUT

250V~10A

INOUT

NETWORK/TELEPHONEPROTECTION

RS232USB

INPUT220-240V~

1000VA

1500VA

2000VA

3000VA

Simulated Dot-Matrix LCD display

52mm

25mm

Different conditions (2-colors LCD display)

NMC SNMP(Network Management

Card)

NMC SNMP Introduction

NMC SNMP is a UPS monitoring accessory to link UPS via Ethernet which provides access information and configuration for the UPS.

NMC comes with an application program which named SPS (System Protect Software) for multi-servers (OS) shutdown purpose.

Communication

UPS Management and Configuration through Ethernet by SNMP Protocol

Standard MIB (RFC1628.mib) Compatible

Record Logs for Analysis

Support Http/Https - Web browser

Warning Notification via E-mail

Support SNMPv1/SNMPv2c/SNMPv3 Protocols

Support Multi-OS Shutdown by SPS

Support Shutdown in VMware by SPS

WinPowerProfessional UPS

software

Winpower Introduction

Winpower is a free download UPS monitoring software which supports either stand alone computers or network (including LAN & Internet) connected computers.

http://www.ups-software-download.com/

Software details

Real Time Remote Monitoring for UPS

Scheduled System Shutdown/Restart/UPS Test

Record Logs for Analysis

Warning Notification via SMS/E-mail/Broadcast

Support Password Security Protection

Support Central Monitoring for SNMP Card

Support Shutdown for Different OS

Support Shutdown in VMware

AS400 Card (Dry Contact Signal Card )

AS400 CARD

This card provides dry-contact signal

Pin# Description 1 UPS failure 2 Fault alarm 3 Reversed 4 Reversed 5 Gnd 6 Reversed 7 Battery low 8 UPS on 9 Utility faliure

Thank you!!!