New Publications Program Standard Title Date Posted … · Detail" will display the scope of the document and other details available on CSA’s Online store. ... IEC 60730-1:2013,

Browse By Group:

Last updated: March 2, 2016

View All

New Publications | Supplements | Amendments | Errata | Endorsements | Reaffirmations | Withdrawals | Formal Interpretations | Informs & Certification Notices | Previous Reports

New Publications

This section lists new standards, new editions (including adoptions), and special publications that have been recently published. Clicking on "View Detail" will display the scope of the document and other details available on CSA’s Online store.Program Standard Title Date Posted ScopeElectrical / Electronics CAN/CSA-C22.2

NO. 62841-2-9:16 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-9: Particular requirements for hand-held tappers and threaders(Bi-national standard with UL 62841-2-9)

3/2/2016 View Detail

Electrical / Electronics CAN/CSA-C22.2 NO. 62841-2-9:16

Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses — Sécurité — Partie 2-9 : Exigences particulières pour les taraudeuses et les fileteuses portatives(norme binationale avec UL 62841-2-9)


Electrical / Electronics C22.2 NO. 298-16 High voltage couplers 3/2/2016 View Detail

Energy C300-15 Performance énergétique et capacité des réfrigérateurs, des 3/2/2016 View Detail

Page 1 of 32Current Standards Activities

3/3/2016http://standardsactivities.csa.ca/standardsactivities/recent_infoupdate.asp

réfrigérateurs-congélateurs, des congélateurs et des refroidisseurs àvin

Energy C388-15 Mesure du rendement énergétique et de la capacité des fours à micro-ondes électroménagers



Medical electrical equipment - Part 2-36: Particular requirements for the basic safety and essential performance of equipment for extracorporeally induced lithotripsy (Adopted IEC 60601-2-36:2014, second edition, 2014-04, with Canadian deviations) | Appareils électromédicaux — Partie 2-36 : Exigences particulières pour la sécurité de base et les performances essentielles des appareils pour lithotritie créée de façon extracorporelle (norme IEC 60601-2-36:2014 adoptée, deuxième édition, 2014-04, avec exigences propres au Canada)


Electrical / Electronics CAN/CSA-C22.2 NO. 62560:16

Self-ballasted LED-lamps for general lighting services by voltage > 50 V – Safety specifications (Adopted IEC IEC 62560:2011, edition 1:2011 consolidated with amendment 1:2015, with Canadiandeviations)Lampes à DEL autoballastées pour l’éclairage général fonctionnant à des tensions > 50 V – Spécifications de sécurité (norme IEC 62560:2011 adoptée, édition 1:2011 consolidée par l’amendement 1:2015, avec exigences propres au Canada)


Life Sciences Z314.10.1-15 Sélection et utilisation des blouses et des champs opératoires destinés aux milieux de soins


Life Sciences Z314.10.2-15 Lavage, entretien et préparation des blouses, des champs opératoires et des enveloppes réutilisables dans les milieux de soins


Construction Products and Materials

O80 SÉRIE-15 Préservation du bois 3/1/2016 View Detail

Energy B602-16 Mechanical couplings for drain, waste, and vent pipe and sewer pipe 3/1/2016 View Detail


Household and similar electrical appliances — Safety — Part 2-16: Particular requirements for food waste disposers(Adopted IEC 60335-2-16:2002, edition 5:2002 consolidated with amendment 1:2008 and amendment 2:2011, with Canadian deviations) | Appareils électrodomestiques et analogues – Sécurité –Partie 2-16 : Règles particulières pour les broyeurs de déchets (norme IEC 60335-2-16:2002 adoptée, édition 5:2002 consolidée par l'amendement 1:2008 et l'amendement 2:2011, avec exigencespropres au Canada)


Electrical / Electronics CAN/CSA-C22.2 Electric motor-operated hand-held tools, transportable tools and lawn 2/29/2016 View Detail



NO. 62841-2-2:16 and garden machinery — Safety — Part 2-2: Particular requirements for hand-held screwdrivers and impact wrenches(Bi-national standard with UL 62841-2-2)


Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses — Sécurité — Partie 2-2 : Règles particulières pour les visseuses et les clés à chocs portatives(norme binationale avec UL 62841-2-2)


Energy ANSI Z83.11-2016/CSA 1.8-2016

Gas food service equipment 2/29/2016 View Detail


A23.4-16 Precast concrete - Materials and construction 2/29/2016 View Detail

Energy ANSI/CSA C448 SERIES-16

Design and installation of ground source heat pump systems for commercial and residential buildings


Energy C812-16 Energy performance of large battery charger systems 2/29/2016 View Detail

Life Sciences CAN/CSA-Z23500:16

Guidance for the preparation and quality management of fluids for haemodialysis and related therapies(Adopted ISO 23500:2014, second edition, 2014-04-101, withCanadian deviations)



Directives concernant la préparation et le management de la qualité des fluides d’hémodialyse et de thérapies annexes (norme ISO 23500:2014 adoptée, deuxième édition, 2014-04-01, avec exigences propres au Canada)


Life Sciences Z314.22-16 Management of loaned, reusable medical devices 2/25/2016 View Detail

Electrical / Electronics C22.2 No. 271-11(R2016)

Photovoltaic cables 2/19/2016

Electrical / Electronics C22.2 NO. 130-16 Requirements for electrical resistance trace heating and heating device sets


Electrical / Electronics C22.2 NO. 4-16 Enclosed and dead-front switches (Tri-national standard with NMX-J-162-ANCE-2016 and UL 98)


Life Sciences CAN/CSA-ISO 26722-16

Water treatment equipment for haemodialysis applications and related therapies(Adopted ISO 26722:2014, Second edition, 2014-04-01)


Life Sciences CAN/CSA-ISO 26722-16

Équipement de traitement de l’eau pour des applications en hémodialyse et aux thérapies apparentées




(norme ISO 26722:2014, Deuxième édition, 2014-04-01)

Energy CAN/CSA-ISO 18134-1:15

Biocarburants solides — Dosage de la teneur en humidité —Méthode de séchage à l’étuve — Partie 1 : Humidité totale —Méthode de référence(norme ISO 18134-1:2015, Première édition, 2015-09-01)


Quality / Business Management

R7003-16 Sustainability standard for household clothes washers (Tri-national standard with AHAM 7003-2016 and UL 7003)


Energy ANSI Z21.1-2016/CSA 1.1-2016

Household cooking gas appliances 2/18/2016 View Detail

Life Sciences Z275.6-16 Unexploded explosive ordnance (UXO), munitions, and police explosive diving



O322-15 Méthode de certification des matériaux en bois traité sous pression destinés aux fondations permanentes


Life Sciences Z314.14-15 Sélection et utilisation des emballages (systèmes de barrière stérile) dans les milieux de soins


Energy C749-15 Rendement énergétique des déshumidificateurs 2/8/2016 View Detail

Energy C802.3-15 Valeurs minimales de rendement pour les transformateurs depuissance


Life Sciences G4-15 Câbles en acier pour usage général, pour l’extraction minière et pour le roulage minier


Energy CAN/CSA-ISO 18122:16

Solid biofuels — Determination of ash content(Adopted ISO 18122:2015, first edition, 2015-10-15)


Energy CAN/CSA-ISO 18122:16

Biocombustibles solides — Méthode de détermination de la teneur en cendres (norme ISO 18122:2015 adoptée, première édition, 2015-10-15)


Electrical / Electronics C22.2 NO. 250.570-16

Track lighting 2/8/2016 View Detail

Gas Equipment ANSI Z21.72-2016/CSA 11.2-2016

Portable type gas camp stoves 2/8/2016 View Detail

Gas Equipment ANSI Z83.8-2016/CSA 2.6-2016

Gas unit heaters, gas packaged heaters, gas utility heaters, and gas-fired duct furnaces




Electrical / Electronics C22.2 NO. 253-16 Medium-voltage ac contactors, controllers, and control centres (Tri-national standard with UL 347 and NMX-J-564/106-ANCE)


Electrical / Electronics C22.2 NO. 128-16 Vending machines 2/4/2016 View Detail

Quality / BusinessManagement

CAN/CSA-ISO 9000:16

Quality management systems - Fundamentals and vocabulary(Adopted ISO 9000:2015, fourth edition, 2015-09-15)



CAN/CSA-ISO 9000:16

Systèmes de management de la qualité - Principes essentiels et vocabulaire (norme ISO 9000:2015 adoptée, quatrième édition, 2015-09-15)



CAN/CSA-ISO 9001:16

Quality management systems - Requirements (Adopted ISO 9001:2015, fifth edition, 2015-09-15)



CAN/CSA-ISO 9001:16

Systèmes de management de la qualité - Exigences(norme ISO 9001:2015 adoptée, cinquième édition, 2015-09-15)



O122-16 Structural glued-laminated timber 1/27/2016 View Detail

Electrical / Electronics C22.2 NO. 0.5-16 Threaded conduit entries 1/27/2016 View Detail

Electrical / Electronics C22.2 NO. 284-16 Nonindustrial photoelectric switches for lighting control (Tri-national standard with UL 773A and NMX-J-715-ANCE)



Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 3-9: Particular requirements for transportable mitre saws(Bi-national standard with UL 62841-3-9)



Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses — Sécurité — Partie 3-9 : Exigences particulières pour les scies à onglets transportables (norme bi-nationale avec UL 62841-3-9)


Life Sciences B341-15 Récipients à pression UN et conteneurs à gaz à éléments multiples destinés au transport des marchandises dangereuses


Life Sciences B342-15 Sélection et utilisation des récipients à pression UN, des conteneurs à gaz à éléments multiples et d’autres récipients à pression pour le transport des marchandises dangereuses, classe 2


Energy C742-15 Performances énergétiques des machines à glaçons automatiques et des réserves de glaçons


Energy C361-16 Energy performance and drum volume of household electric clothesdryers




Electrical / Electronics C22.2 NO. 0.2-16 Insulation coordination 1/18/2016 View Detail

Electrical / Electronics CAN/CSA-E60730-1:15

Automatic electrical controls – Part 1: General requirements (Adopted IEC 60730-1:2013, fifth edition, 2013-11, with Canadian deviations)Dispositifs de commande électrique automatiques — Partie 1 :Exigences générales (norme IEC 60730-1:2013 adoptée, cinquième édition, 2013-11, avec exigences propres au Canada)


Energy N286.7-16 Quality assurance of analytical, scientific and design computerprograms


Energy N288.7-15 Programmes de protection des eaux souterraines aux installations nucléaires de catégorie I et aux mines et usines de concentrationd’uranium


Life Sciences CAN/CSA-Z10535.1:15

Hoists for the transfer of disabled persons — Requirements and test methods(Adopted ISO 10535:2006, second edition, 2006-12-15, with Canadian deviations)


Life Sciences CAN/CSA-Z10535.1:15

Lève-personnes pour transférer des personnes handicapées -Exigences et méthodes d'essai(norme ISO 10535:2006 adoptée, deuxième édition, 2006-12-15, avec exigences propres au Canada)


Life Sciences Z317.2-15 Special requirements for heating, ventilation, and air-conditioning (HVAC) systems in health care facilities



Medical electrical equipment — Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment(Adopted IEC 60601-2-63:2012, first edition, 2012-09, with Canadian deviations) | Appareils électromédicaux – Partie 2-63 : Exigences particulières pour la sécurité de base et les performances essentielles des appareils à rayonnement X dentaires extra-oraux (norme IEC 60601-2-63:2012 adoptée, première édition, 2012-09, avec exigences propres au Canada)



Medical electrical equipment — Part 2-68: Particular requirements for the basic safety and essential performance of X-ray-based image-guided radiotherapy equipment for use with electronaccelerators, light ion beam therapy equipment and radionuclidebeam therapy equipment (Adopted IEC 60601-2-68:2014, first edition,2014-09, with Canadian deviations) | Appareils électromédicaux —Partie 2-68 : Exigences particulières pour la sécurité de base et lesperformances essentielles des appareils de radiothérapie à rayonnement X assistée par imagerie médicale, destinés à être




utilisés avec les accélérateurs d’électrons, les appareils de thérapie par faisceau d’ions légers et les appareils de thérapie par faisceau de radionucléides (norme IEC 60601-2-68:2014 adoptée, première édition, 2014-09, avec exigences propres au Canada)


Medical electrical equipment – Part 2-58: Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery(Adopted IEC 80601-2-58:2014, second edition, 2014-09, withCanadian deviations) | Appareils électromédicaux — Partie 2-58 : Exigences particulières pour la sécurité de base et les performances essentielles des dispositifs de retrait du cristallin et des dispositifs de vitrectomie pour la chirurgie ophtalmique (norme IEC 80601-2-58:2014 adoptée, deuxième édition, 2014-09, avec exigences propres au Canada)



Household and similar electrical appliances — Safety — Part 2-56: Particular requirements for projectors and similar appliances(Adopted IEC 60335-2-56:2002, edition 3:2002 consolidated with amendment 1:2008 and amendment 2:2014, with Canadian deviations) | Appareils électrodomestiques et analogues — Sécurité — Partie 2-56 : Règles particulières pour les projecteurs d´images et appareils analogues (norme IEC 60335-2-56:2002 adoptée, édition 3:2002 consolidée par l’amendement 1:2008 et l’amendement 2:2014, avec exigences propres au Canada)



Medical electrical equipment – Part 2-62: Particular requirements for the basic safety and essential performance of high intensity therapeutic ultrasound (HITU) equipment (Adopted IEC 60601-2-62:2013, first edition, 2013-07, with Canadian deviations) | Appareils électromédicaux — Partie 2-62 : Exigences particulières pour la sécurité de base et les performances essentielles des appareils ultrasonores thérapeutiques de haute intensité (HITU) (norme IEC 60601-2-62:2013 adoptée, première édition, 2013-07, avec exigences propres au Canada)


Electrical / Electronics CAN/CSA-E60335-2-10:15

Household and similar electrical appliances — Safety — Part 2-10: Particular requirements for floor treatment machines and wet scrubbing machines(Adopted IEC 60335-2-10:2002, edition 5:2002 consolidated withamendment 1:2008, with Canadian deviations) | Appareils électrodomestiques et analogues — Sécurité — Partie 2-10 : Règles particulières pour les appareils de traitement des sols et les machines à brosser les sols mouillés (norme IEC 60335-2-10:2002, édition 5:2002 consolidée par l'amendement 1:2008, avec exigences propres au Canada)





Medical electrical equipment — Part 1-12: General requirements for basic safety and essential performance — Collateral standard: Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment (Adopted IEC 60601-1-12:2014, first edition, 2014-06, with Canadian deviations) | Appareils électromédicaux — Partie 1-12 : Exigences générales pour la sécurité de base et les performances essentielles — Norme collatérale : Exigences pour les appareils électromédicaux et les systèmes électromédicaux destinés à être utilisés dans l'environnement des services médicaux d'urgence (norme IEC 60601-1-12:2014 adoptée, première édition, 2014-06, avec exigences propres au Canada)


Electrical / Electronics C22.2 NO. 223-15 Power supplies with extra-low-voltage class 2 outputs 1/8/2016 View Detail


Medical electrical equipment - Part 1-11: General requirements for basic safety and essential performance - Collateral standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment (Adopted IEC 60601-1-11:2015, second edition, 2015-01, with Canadian deviations) | Appareils électromédicaux - Partie 1-11 : Exigences générales pour la sécurité de base et les performances essentielles - Norme collatérale : Exigences pour les appareils électromédicaux et les systèmes électromédicaux utilisés dans l'environnement des soins à domicile (norme IEC 60601-1-11:2015 adoptée, deuxième édition, 2015-01, avec exigences propres au Canada)



ASSE 1070-2015/ASMEA112.1070-2015/CSA B125.70-15

Performance requirements for water temperature limiting devices 1/8/2016 View Detail


ASSE 1002-2015/ASMEA112.1002-2015/CSA B125.12-15

Anti-siphon fill valves for water closet tanks 1/8/2016 View Detail

Energy CAN/CSA-ISO 18134-3:15

Solid biofuels — Determination of moisture content — Oven dry method — Part 3: Moisture in general analysis sample(Adopted ISO 18134-3:2015, first edition, 2015-09-01)


Energy CAN/CSA-ISO Biocombustibles solides — Méthode de détermination de la teneur en 1/5/2016 View Detail



18134-3:15 humidité — Méthode de séchage à l’étuve — Partie 3 : Humidité del’échantillon pour analyse générale (norme ISO 18134-3:2015 adoptée, première édition, 2015-09-01)

Electrical / Electronics C22.2 NO. 2556-15 Wire and cable test methods (Tri-national standard with NMX-J-556-ANCE- 2015 and UL 2556)


Energy C802.3-15 Minimum efficiency values for power transformers 1/5/2016 View Detail

Life Sciences Z902-15 Blood and blood components 1/5/2016 View Detail

Life Sciences Z902-15 Sang et produits sanguins labiles 1/5/2016 View Detail

Life Sciences CAN/CSA-ISO 11663:15 -

Quality of dialysis fluid for haemodialysis and related therapies (Adopted ISO 11663:2014, second edition, 2014-04-01)


Life Sciences CAN/CSA-ISO 11663:15

Qualité des fluides de dialyse pour hémodialyse et thérapies apparentées (norme ISO 11663:2014 adoptée, deuxième édition, 2014-04-01)


Electrical / Electronics C22.2 NO. 290-15 Photovoltaic combiners 1/5/2016 View Detail

Electrical / Electronics C22.2 NO. 89-15 Swimming-pool luminaires, submersible luminaires, and accessories 1/5/2016 View Detail

Electrical / Electronics C22.2 NO. 112-15 Electric clothes dryers (Bi-national standard with UL 2158) 1/5/2016 View Detail

Energy P.3-15 Testing method for measuring energy consumption and determining efficiencies of gas-fired and fuel oil-fired water heaters


Life Sciences Z94.3-15 Eye and face protectors 1/5/2016 View Detail

Life Sciences Z317.10-15 Manipulation des déchets de soins de santé 1/5/2016 View Detail

Energy N289.5-12 Exigences relatives à l’instrumentation sismique des centrales et installations nucléaires


Life Sciences EXP06-2015 Evaluating emerging materials and technologies for infection prevention and control

1/4/2016

Energy EXP248-2015 Pipeline human factors 1/4/2016

Life Sciences Z32-15 Electrical safety and essential electrical systems in health carefacilities



Medical electrical equipment — Part 2-64: Particular requirements for the basic safety and essential performance of light ion beam medical electrical equipment (Adopted IEC 60601-2-64:2014, first edition, 2014-09, with Canadian deviations) | Appareils électromédicaux — Partie 2-64 : Exigences




particulières pour la sécurité de base et les performances essentielles des appareils électromédicaux par faisceau d'ions légers (norme IEC 60601-2-64:2014 adoptée, première édition, 2014-09, avec exigences propres au Canada)


Medical electrical equipment – Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral x-ray equipment (Adopted IEC 60601-2-65:2012, first edition, 2012-09, with Canadian deviations) | Appareils électromédicaux – Partie 2-65 : Exigences particulières pour la sécurité de base et les performances essentielles des appareils à rayonnement X dentaires intra-oraux (norme IEC 60601-2-65:2012 adoptée, première édition, 2012-09, avec exigences propres au Canada)


Energy N290.12-14 Facteurs humains dans la conception des centrales nucléaires 12/23/2015 View Detail


Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 2-4: Particular requirements for hand-held sanders and polishers other than disc type(Bi-national standard with UL 62841-2-4)



Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses — Sécurité — Partie 2-4 : Exigences particulières pour les ponceuses et lustreuses portatives, autres que du type à disque (norme binationale avec UL 62841-2-4)


Energy Z276-15 Gaz naturel liquéfié (GNL) : production, stockage et manutention 12/23/2015 View Detail


A23.3-14 Calcul des ouvrages en béton 12/23/2015 View Detail


Medical devices — Sleep apnoea breathing therapy — Masks and application accessories(Adopted ISO 17510:2015, first edition, 2015-08-01, with Canadiandeviations)



Dispositifs médicaux — Thérapie respiratoire de l’apnée du sommeil — Masques et accessoires d’application(norme ISO 17510:2015 adoptée, première édition, 2015-08-01, avec exigences propres au Canada)


Life Sciences N285.7-15 Periodic inspection of CANDU nuclear power plant balance of plant systems and components


Communications / CAN/CSA-ISO/IEC Information technology - Implementation and operation of customer 12/7/2015 View Detail



Information 14763-3:15 premises cabling - Part 3: Testing of optical fibre cabling(Adopted ISO/IEC 14763-3:2014, edition 2.0, 2014-06)

Communications /Information

CAN/CSA-ISO/IEC18000-7:15

Information technology - Radio frequency identification for item management - Part 7: Parameters for active air interface communications at 433 MHz(Adopted ISO/IEC 18000-7:2014, fourth edition, 2014-09-01)



CAN/CSA-ISO/IEC 24730-1:15

Information technology - Real-time locating systems (RTLS) - Part 1: Application programming interface (API)(Adopted ISO/IEC 24730-1:2014, second edition, 2014-02-15)




Identification cards - Recording technique - Part 1: Embossing(Adopted ISO/IEC 7811-1:2014, fourth edition, 2014-09-01)




Identification cards - Recording technique - Part 2: Magnetic stripe -Low coercivity(Adopted ISO/IEC 7811-2:2014, fourth edition, 2014-08-15)



CAN/CSA-ISO/IEC7811-6:15

Identification cards - Recording technique - Part 6: Magnetic stripe -High coercivity (Adopted ISO/IEC 7811-6:2014, fourth edition, 2014-09-01)


Life Sciences Z107.58-15 Déclaration des valeurs d’émission sonore des machines 12/7/2015 View Detail

Supplements

Supplements are issued periodically for some standards. This section lists those recently published.Program Standard Title Date Posted Scope

No activity to report

Amendments

Amendments are issued periodically for some standards. This section lists those recently published. If not registered for the CSA Standards Update Service, Register NowProgram Standard Title Date Posted ScopeElectrical / Electronics C22.2 No. 131-14,

Update No. 1 Type TECK 90 cableAmendment to Clause 2, Tables 3, 17, and 18

1/27/2016

Electrical / Electronics C22.2 No. 188-13, Update No. 2

Splicing wire connectorsRevised Title page, Copyright page, and Preface

1/26/2016



Deleted Clause 6.1.2

Electrical / Electronics C22.2 No. 65-13, Update No. 2

Wire connectorsRevised Title page, Copyright page, Preface, and Clause 9.1.5.3Deleted Clause 6.1.2

1/26/2016

Electrical / Electronics CAN/CSA-C22.2 NO. 60601-1-6A:11

Amendment 1:2015 to CAN/CSA-C22.2 NO. 60601-1-6:11, Medicalelectrical equipment - Part 1-6: General requirements for basic safety and essential performance - Collateral standard: Usability (Adopted amendment 1:2013 to IEC 60601-1-6:2010) | Modification 1:2015 de CAN/CSA-C22.2 NO. 60601-1-6:11, Appareils électromédicaux - Partie 1-6: Exigences générales pour la sécurité de base et les performances essentielles - Norme collatérale: Aptitude à l'utilisation (Amendement 1:2013 adoptée de la norme IEC 60601-1-6:2010)

1/8/2016


CAN/CSA-ISO/IEC 19788-1A:15

Amendment 1:2015 to CAN/CSA-ISO/IEC 19788-1:15, Informationtechnology - Learning, education and training - Metadata for learningresources - Part 1: Framework(Adopted amendment 1:2014 to ISO/IEC 19788-1:2011)

1/5/2016


CAN/CSA-ISO/IEC 14496-16B:13

Amendment 2:2015 to CAN/CSA-ISO/IEC 14496-16:13, Information technology - Coding of audio-visual objects - Part 16: Animation framework eXtension (AFX) - Amendment 2: Multi-resolution 3Dmesh compression(Adopted amendment 2:2014 to ISO/IEC 14496-16:2011)

1/5/2016


CAN/CSA-ISO/IEC14443-3C:13

Amendment 3:2015 to CAN/CSA-ISO/IEC 14443-3:13, Identification cards - Contactless integrated circuit cards - Proximity cards - Part 3: Initialization and anticollision -Amendment 3: Alternating between PICC and PCD functionalities, and PICC supporting both types (Adopted amendment 3:2014 to ISO/IEC 14443-3:2011)

1/5/2016


CAN/CSA-ISO/IEC 14443-4D-09 (R2014)

Amendment 4:2015 to CAN/CSA-ISO/IEC 14443-40-09, Identification cards - Contactless integrated circuit cards - Proximity cards - Part 4: Transmission protocol - Amendment 4: Frame with error correction(Adopted amendment 4:2014 to ISO/IEC 14443-4:2008)

1/5/2016


CAN/CSA-ISO/IEC 14496-3D-10(R2015)

Amendment 4:2015 to CAN/CSA-ISO/IEC 14496-3-10, Information technology - Coding of audio-visual objects - Part 3: Audio -Amendment 4: New levels for AAC profiles (Adopted amendment 4:2013 to ISO/IEC 14496-3:2009)

1/5/2016


CAN/CSA-ISO/IEC 14496-4AO-06(R2011)

Amendment 41:2015 to CAN/CSA-ISO/IEC 14496-4-06, Information technology - Coding of audio-visual objects - Part 4: Conformance testing - Amendment 41: Conformance testing of MVC plus depth

1/5/2016



extension of AVC (Adopted amendment 41:2014 to ISO/IEC 14496-4:2004)


CAN/CSA-ISO/IEC 14443-3F:13

Amendment 6:2015 to CAN/CSA-ISO/IEC 14443-3:13, Identification cards - Contactless integrated circuit cards - Proximity cards - Part 3: Initialization and anticollision - Amendment 6: Bit rates of 3fc/4, fc, 3fc/2 and 2fc from PCD to PICC (Adopted amendment 6:2014 to ISO/IEC 14443-3:2011)

1/5/2016


CAN/CSA-ISO/IEC 14496-1B:12

Amendment 2:2015 to CAN/CSA-ISO/IEC 14496-1:12, Informationtechnology - Coding of audio-visual objects - Part 1: Systems -Amendment 2: Support for raw audiovisual data (Adopted amendment 2:2014 to ISO/IEC 14496-1:2010)

1/5/2016


A23.3-14 Design of concrete structuresRevision to Clause D.4.3.5.3

12/23/2015

Energy N289.3-10 (R2015), Update No. 2

Design procedures for seismic qualification of nuclear power plantsRevised Preface, Clauses 2, 4.1.2, 4.1.3, 4.3.2.1, 4.4.4.5, 5.3.1, 5.6.1, 5.6.4, 6.5.2.2, 6.6.3,6.8.2.4.1, 7.3.3.1, 7.3.4, 7.3.5.2, 7.4.2.1, 7.4.3.1, 7.4.3.3, 7.4.4, 7.4.4.2, 7.4.5.1,and 10.2.5, and Table 2

12/7/2015

Electrical / Electronics C22.2 No. 203.1-14, Update No. 1

Manufactured wiring systemsRevision to Clauses 7.2.2, 7.2.3, and 7.2.4

12/7/2015

Errata

Errata are issued periodically for some standards. This section lists those recently published. If not registered for the CSA Standards Update Service, Register NowProgram Standard Title Date Posted ScopeEnergy N285.8-15 Technical requirements for in-service evaluation of zirconium alloy

pressure tubes in CANDU reactorsErrata to Clauses D.5.4.1 and D.8.2 and Table C.1

2/26/2016

Energy N286.7-16 Quality assurance of analytical, scientific, and design computerprogramsErrata to Clauses A.1.9, A.1.10, and A.2.2.2

2/26/2016

Life Sciences Z96-15 High-visibility safety apparelErrata to Clause 5.2.1

2/26/2016

Electrical / Electronics C22.2 No. 127-15 Equipment and lead wires 2/18/2016



Errata to Clauses 6.1.12.2 and 6.5 and Tables 1, 8, 21, 40, and 44

Energy C300-15 Energy performance and capacity of household refrigerators,refrigerator-freezers, freezers, and wine chillersErrata to Preface and Clauses 9.1.2 and 9.1.3

2/18/2016

Energy C282-15 Emergency electrical power supply for buildingsErrata to Clauses 9.5.1 and 11.2

2/10/2016

Energy C282-15 Alimentation électrique de secours des bâtimentsErrata - Articles 8.7.2, 9.5.1 et 11.2

2/10/2016

Energy CAN/CSA-Z246.2-14

Emergency preparedness and response for petroleum and natural gas industry systemsErrata to Figure A.2

2/8/2016

Energy CAN/CSA-Z246.2-14

Préparation et intervention d’urgence pour les installations liées à l’industrie du pétrole et du gaz naturelErrata - Figure A.2

2/8/2016

Energy CAN/CSA-P.4.1-15 Testing method for measuring annual fireplace efficiencyErrata to Clauses 4.9 and 6.22 and Figure 7

1/27/2016

Energy CAN/CSA-P.4.1-15 Méthode d’essai pour mesurer l’efficacité annuelle des foyersErrata - Articles 4.9 et 6.22 et Figure 7

1/27/2016

Life Sciences Z262.5-15 Face protectors for use in ringetteErrata to Figure 6

1/22/2016

Electrical / Electronics C22.1-15 Code canadien de l’électricité, Première partie, Vingt-troisième éditionLes erratas qui suivent s’appliquent à l’édition 2015 du Code canadien de l’électricité, Première partie :Article 4-004 11) — Remplacer «conformément à l’article 4-010 3)» par «conformément àl’article 4-010 7)».Article 4-012 3) — Ajouter le symbole delta (Δ) dans la marge.Article 10-814 4) — Ajouter un point à la fin de ce paragraphe.Section 12 — Ajouter un «s» à la fin de «Méthode» dans le titre de cette section.Article 12-910 4) d) — Remplacer «du tableau 10A ou 10B» par «des tableaux 10A à 10D».Article 12-2260 4) — Remplacer «prescrites à l’article 8-104 4) ou 5)» par «prescrites à l’article 8-104 5)ou 6)».etc

1/22/2016

Electrical / Electronics C22.1-15, Update Canadian Electrical Code, Part I, Twenty-third Edition 12/23/2015



No. 1 The list of errata that have been identified in the 2015 edition of the Canadian Electrical Code, Part I is in CE Code, Part I under Update No. 1.

Life Sciences Z263.1-14 Recreational alpine skiing and snowboarding helmetsErrata to Clauses 6.7.2.1, 6.7.2.2, and 6.8.2

12/23/2015

Life Sciences Z263.1-14 Casques de ski alpin et de planche à neige à usage récréatifErrata - Articles 6.7.2.1, 6.7.2.2 et 6.8.2

12/23/2015

Life Sciences Z314.15-15 Storage, transportation, and distribution of single use and reusable medical devicesErrata to Subcommittee

12/22/2015


B64 Series-11, Update No. 2

Backflow preventers and vacuum breakersRevised B64 Series-11: Outside front cover, title page, Technical Committee, and PrefaceB64.1.4-11: Figures 1 and 2New B64 Series-11: National Standards of Canada text

12/22/2015


B64 Série-11, Mise à jour no 2

Casse-vide et dispositifs antirefoulementModification B64 Série-11 : Première de couverture, page titre, préface et Comité techniqueB64.1.4-11 : Figures 1 et 2Ajout B64 Série-11 : Texte des Normes nationales du Canada

12/22/2015

Electrical / Electronics C22.2 NO. 0.15-15 Adhesive labelsErrata to Clauses 5.1, 5.2, and 6.4.2

12/22/2015

Life Sciences Z262.1-15 Ice hockey helmetsErrata to Table 1 and Figure 6

12/22/2015

Life Sciences Z262.1-15 Casques de hockey sur glaceTableau 1 et Figure 6

12/22/2015


B137 Series-13, Update No. 3

Thermoplastic pressure piping compendiumRevised Technical Committee and Preface

12/16/2015


B137 Série-13, Mise à jour no 3

Recueil de normes sur la tuyauterie sous pression en matière thermoplastiqueModification et Comité technique

12/16/2015

Endorsements

This section lists endorsed standards, which are standards that have been developed by another standards development organization and approved



by the appropriate CSA Technical Committee for use in Canada. Endorsed standards are not sold by CSA. Program Standard Title Date Posted Scope

No activity to report

Reaffirmations

The standards listed in this section have been reviewed to determine if they remain technically valid and have been reaffirmed as acceptable for use until the next edition is published or for a further five years (whichever comes first).Program Standard Title Date Posted ScopeEnergy CAN/CSA-C382-11

(R2016) Energy performance of televisions and displays 2/29/2016

Life Sciences Z76.1-06 (R2016) Reclosable Child-Resistant Packages 2/24/2016

Life Sciences M421-11 (R2016) Use of electricity in mines 2/24/2016

Electrical / Electronics CAN/CSA-C60044-7-07 (R2016)

Instrument Transformers - Part 7: Electronic Voltage Transformers (Adopted CEI/IEC 60044-7:1999, first edition, 1999-12, with Canadian deviations)

2/17/2016

Electrical / Electronics CAN/CSA-C60044-8-07 (R2016)

Instrument Transformers - Part 8: Electronic Current Transformers (Adopted IEC 60044-8:2002, first edition, 2002-07, with Canadian deviations)

2/17/2016

Life Sciences CAN/CSA-M424.3-M90 (R2016)

Braking Performance - Rubber-Tired, Self-Propelled Underground Mining Machines

2/17/2016

Electrical / Electronics IEC 60464-2 (2001)

VARNISHES USED FOR ELECTRICAL INSULATION - PART 2: TEST METHODSReaffirmation of Endorsed Standard

2/16/2016

Electrical / Electronics IEC 60464-3-1 (2001)

VARNISHED USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS, SHEET 1: AMBIENT CURING FINSIHING VARNISHESReaffirmation of Endorsed Standard

2/16/2016


VARNISHED USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS, SHEET 2 HOT CURING IMPREGNATING VARNISHESReaffirmation of Endorsed Standard

2/16/2016

Electrical / Electronics IEC 60216-3:2006 ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES -PART 3: INSTRUCTIONS FOR CALCULATING

2/16/2016



THERMAL ENDURANCE CHARACTERISTICSReaffirmation of Endorsed Standard

Electrical / Electronics IEC 60455-3-5:2006

RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 5: UNSATURATED POLYESTERBASEDIMPREGNATING RESINSReaffirmation of Endorsed Standard

2/16/2016

Electrical / Electronics IEC 60672-1 (1995) CERAMIC AND GLASS INSULATING MATERIALS - PART 1: DEFINITIONS ANDCLASSIFICATIONReaffirmation of Endorsed Standard

2/16/2016

Electrical / Electronics IEC 60455-3-1 (2003-04)

RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 1: UNFILLED EPOXY RESINOUSCOMPOUNDSReaffirmation of Endorsed Standard

2/16/2016


RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 2: QUARTZ FILLED EPOXY RESINOUS COMPOUNDSReaffirmation of Endorsed Standard

2/16/2016


RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 3: UNFILLEDPOLYURETHANECOMPOUNDSReaffirmation of Endorsed Standard

2/16/2016


RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 4: FILLED POLYURETHANE COMPOUNDSReaffirmation of Endorsed Standard

2/16/2016

Electrical / Electronics IEC 60554-2:2001 CELLULOSIC PAPERS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TESTReaffirmation of Endorsed Standard

2/16/2016

Electrical / Electronics IEC 60544-4 (2003-07)

ELECTRICAL INSULATING MATERIALS - DETERMINING THE EFFECTS OF IONIZING RADIATION - PART 4: CLASSIFICATION SYSTEM FOR SERVICE IN RADIATION ENVIRONMENTReaffirmation of Endorsed Standard

2/16/2016


FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 300: GLASS

2/16/2016



TEXTILE FIBRE SLEEVING, BRAIDED, UNCOATEDReaffirmation of Endorsed Standard

Electrical / Electronics IEC 60684-3-320:2002

FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 320: POLYETHYLENE TEREPHTHALATE TEXTILE SLEEVING,LIGHTLYIMPREGNATEDReaffirmation of Endorsed Standard

2/16/2016

Energy CAN/CSA-C860-11(R2016)

Performance of internally lighted exit signs 2/12/2016

Electrical / Electronics C9-02 (R2016) Dry-Type Transformers 2/12/2016

Energy CAN/CSA-C819-11 (R2016)

Performance of general service fluorescent lamps 2/12/2016

Energy CAN/CSA-C61400-3-11 (R2016)

Wind turbines - Part 3: Design requirements for offshore wind turbines 2/9/2016


Z762-95 (R2016) Design for the environment (DFE) 1/22/2016


Testing of three-phase squirrel cage induction motors during refurbishment

1/22/2016


B242-05 (R2016) Groove- and Shoulder-Type Mechanical Pipe Couplings 1/22/2016


CAN/CSA-S826 Series-01 (R2016)

Ferry Boarding Facilities (Consists of CAN/CSA-S826.1, CAN/CSA-S826.2, CAN/CSA-S826.3 and CAN/CSA-S826.4)

1/22/2016

Life Sciences CAN/CGSB/CSA-Z1610-11 (R2016)

Protection of first responders from chemical, biological, radiological, and nuclear (CBRN) events

1/22/2016

Energy Z245.6-06 (R2016) Coiled aluminum line pipe and accessories 1/19/2016

Electrical / Electronics CAN/CSA-C1325-99 (R2016)

Insulators for Overhead Lines With a Nominal Voltage Above 1000 V - Ceramic or Glass Insulator Units for D.C. Systems - Definitions, Test Methods and Acceptance Criteria

1/18/2016


Zinc-Coated Steel Wires for Stranded Conductors 1/18/2016


Hard-Drawn Aluminum Wire for Overhead Line Conductors 1/18/2016




Aluminium-Magnesium-Silicon Alloy Wire for Overhead LineConductors

1/18/2016


Aluminium-Clad Steel Wires for Electrical Purposes 1/18/2016


CAN/CSA]ISO/IEC 15504]4:05(R2015)

INFORMATION TECHNOLOGY ] PROCESS ASSESSMENT ] PART4: GUIDANCE ON USE FOR PROCESS IMPROVEMENT AND PROCESS CAPABILITY DETERMINATION

1/12/2016


CAN/CSA]ISO/IEC 15504]3:05(R2015)

INFORMATION TECHNOLOGY ] PROCESS ASSESSMENT ] PART3: GUIDANCE ON PERFORMING AN ASSESSMENT

1/12/2016


CAN/CSA-ISO/IEC 15504-1:05(R2015)

INFORMATION TECHNOLOGY - PROCESS ASSESSMENT -] PART 1: CONCEPTS AND VOCABULARY

1/12/2016


CAN/CSA-ISO/IEC TR 14143-5:05(R2015)

INFORMATION TECHNOLOGY ] SOFTWARE MEASUREMENT -FUNCTIONAL SIZE MEASUREMENT - PART 5: DETERMINATION OF FUNCTIONAL DOMAINS FOR USE WITH FUNCTIONAL SIZEMEASUREMENT

1/12/2016



SOFTWARE ENGINEERING - PRODUCT QUALITY - PART 4:QUALITY IN USE METRICS

1/12/2016


CAN/CSA-ISO/IEC 26908-10 (R2015)

INFORMATION TECHNOLOGY - TELECOMMUNICATIONS ANDINFORMATION EXCHANGE BETWEEN SYSTEMS - MAC-PHY INTERFACE FOR ISO/IEC 26907

1/12/2016



INFORMATION TECHNOLOGY ] TELECOMMUNICATIONS ANDINFORMATION EXCHANGE BETWEEN SYSTEMS - HIGH]RATE ULTRAWIDEBAND PHY AND MAC STANDARD

1/12/2016


CAN/CSA-ISO/IEC 8825-5-10 (R2015)

INFORMATION TECHNOLOGY - ASN.1 ENCODING RULES:MAPPING W3C XML SCHEMA DEFINITIONS INTO ASN.1

1/12/2016


CAN/CSA-ISO/IEC 23290:05 (R2015)

INFORMATION TECHNOLOGY - TELECOMMUNICATIONS ANDINFORMATION EXCHANGE BETWEEN SYSTEMS - PRIVATE INTEGRATED SERVICES NETWORK (PISN) - MAPPING FUNCTIONS FOR THE TUNNELLING OF QSIG THROUGH H.323NETWORKS

1/12/2016


CAN/CSA-ISO/IEC 10021-5:02(R2015)

INFORMATION TECHNOLOGY - MESSAGE HANDLING SYSTEMS(MHS): MESSAGESTORE: ABSTRACT SERVICE DEFINITION

1/12/2016




CAN/CSA-ISO/IEC 8473-5-01 (R2015)

INFORMATION TECHNOLOGY - PROTOCOL FOR PROVIDING THE CONNECTIONLESS-MODE NETWORK SERVICE: PROVISION OF THE UNDERLYING SERVICE BY ISDN CIRCUIT-SWITCHED B-CHANNELS

1/12/2016


CAN/CSA-ISO/IEC 8473-1-01 (R2015)

INFORMATION TECHNOLOGY - PROTOCOL FOR PROVIDING THE CONNECTIONLESS-MODE NETWORK SERVICE: PROTOCOL SPECIFICATION

1/12/2016



INFORMATION TECHNOLOGY - OPEN SYSTEMSINTERCONNECTION - PROTOCOLFOR PROVIDING THE CONNECTION-MODE TRANSPORT SERVICE

1/12/2016



INFORMATION TECHNOLOGY - TELECOMMUNICATIONS ANDINFORMATION EXCHANGE BETWEEN SYSTEMS – PRIVATE INTEGRATED SERVICES NETWORK - INTER-EXCHANGE SIGNALLING PROTOCOL - TRANSIT COUNTER ADDITIONAL NETWORK FEATURE

1/12/2016



INFORMATION TECHNOLOGY - TELECOMMUNICATIONS ANDINFORMATION EXCHANGE BETWEEN SYSTEMS - USE OF OSI APPLICATIONS OVER THE INTERNET TRANSMISSION CONTROL PROTOCOL (TCP)

1/12/2016


CAN/CSA-ISO/IEC-8602-97 (R2015)

INFORMATION TECHNOLOGY - PROTOCOL FOR PROVIDING THE OSI CONNECTIONLESS-MODE TRANSPORT SERVICE

1/12/2016


CAN/CSA-ISO/IEC 8473-3-97 (R2015)

INFORMATION TECHNOLOGY-PROTOCOL FOR PROVIDING THECONNECTIONLESS-MODE NETWORK SERVICE-PROVISION OF THE UNDERLYING SERVICE BY AN X.25 SUBNETWORK

1/12/2016



INFORMATION TECHNOLOGY-TELECOMMUNICATIONS ANDINFORMATION EXCHANGE BETWEEN SYSTEMS-PRIVATE TELECOMMUNICATIONS NETWORKS-DIGITAL CHANNEL AGGREGATION

1/12/2016



INFORMATION TECHNOLOGY-TELECOMMUNICATIONS ANDINFORMATION EXCHANGE BETWEEN SYSTEMS-PRIVATE INTEGRATED SERVICES NETWORK-SPECIFICATION, FUNCTIONAL MODEL, AND INFORMATION FLOWS-CALLCOMPLETION SUPPLEMENTARY SERVICES

1/12/2016



INFORMATION TECHNOLOGY-TELECOMMUNICATIONS ANDINFORMATION EXCHANGE BETWEEN SYSTEMS-PRIVATE INTEGRATED SERVICES NETWORK-SPECIFICATION, FUNCTIONAL MODEL AND INFORMATION FLOWS-NAMEIDENTIFICATION SUPPLEMENTARY SERVICES

1/12/2016





INFORMATION TECHNOLOGY - TELECOMMUNICATIONS ANDINFORMATION EXCHANGE BETWEEN SYSTEMS – PRIVATE INTEGRATED SERVICES NETWORK - CIRCUIT-MODE MULTI-BEARER SERVICES - SERVICE DESCRIPTION, FUNCTIONALCAPABILITIES & INFORMATION FLOWS

1/12/2016



INFORMATION TECHNOLOGY - OPEN SYSTEMSINTERCONNECTION - NETWORK LAYER SECURITY PROTOCOL

1/12/2016



INFORMATION TECHNOLOGY-TELECOMMUNICATIONS ANDINFORMATION EXCHANGE BETWEEN SYSTEMS-END SYSTEM ROUTEING INFORMATION EXCHANGE PROTOCOL FOR USE IN CONJUNCTION WITH ISO/IEC 8878

1/12/2016


CAN/CSA-ISO/IEC 9995-4-10 (R2015)

INFORMATION TECHNOLOGY - KEYBOARD LAYOUTS FOR TEXTAND OFFICE SYSTEMS - PART 4: NUMERIC SECTION

1/12/2016


CAN/CSA-ISO/IEC 9995-5-10 (R2015)

INFORMATION TECHNOLOGY - KEYBOARD LAYOUTS FOR TEXTAND OFFICE SYSTEMS - PART 5: EDITING AND FUNCTIONSECTION

1/12/2016


CAN/CSA-ISO/IEC 9995-1-10 (R2015)

INFORMATION TECHNOLOGY - KEYBOARD LAYOUTS FOR TEXTAND OFFICE SYSTEMS - PART 1: GENERAL PRINCIPLES GOVERNING KEYBOARD LAYOUTS

1/12/2016


CAN/CSA-ISO/IEC 9995-2-10 (R2015)

INFORMATION TECHNOLOGY - KEYBOARD LAYOUTS FOR TEXTAND OFFICE SYSTEMS - PART 2: ALPHANUMERIC SECTION

1/12/2016


CAN/CSA-ISO/IEC 9995-8-10 (R2015)

INFORMATION TECHNOLOGY - KEYBOARD LAYOUTS FOR TEXTAND OFFICE SYSTEMS - PART 8: ALLOCATION OF LETTERS TO THE KEYS OF A NUMERIC KEYPAD

1/12/2016


CAN/CSA-ISO/IEC 9995-7-10 (R2015)

INFORMATION TECHNOLOGY - KEYBOARD LAYOUTS FOR TEXTAND OFFICE SYSTEM - PART 7: SYMBOLS USED TO REPRESENT FUNCTIONS

1/12/2016



COLLECTION OF GRAPHICAL SYMBOLS FOR OFFICEEQUIPMENT

1/12/2016


CAN/CSA-ISO/IEC 11581-5:05(R2015)

INFORMATION TECHNOLOGY - USER SYSTEM INTERFACES AND SYMBOLS - ICON SYMBOLS AND FUNCTIONS - PART 5: TOOL ICONS

1/12/2016


CAN/CSA-ISO/IEC 19757-2-10(R2015)

INFORMATION TECHNOLOGY - DOCUMENT SCHEMA DEFINITION LANGUAGE (DSDL) - PART 2: REGULAR-GRAMMAR-BASED VALIDATION RELAX NG

1/12/2016

Communications / CAN/CSA-ISO/IEC- INFORMATION TECHNOLOGY - PROCESSING LANGUAGES - 1/12/2016



Information 10180-97 (R2015) STANDARD PAGE DESCRIPTION LANGUAGE (SPDL)



Information technology - Open-edi reference model 1/12/2016


CAN/CSA-ISO/IEC 11179-4:05(R2015)

INFORMATION TECHNOLOGY - METADATA REGISTRIES (MDR) – PART 4: FORMULATION OF DATA DEFINITIONS

1/12/2016


CAN/CSA-ISO/IEC 11179-1:05(R2015)

INFORMATION TECHNOLOGY - METADATA REGISTRIES (MDR) – PART 1: FRAMEWORK

1/12/2016



Information Technology - Codes for the Representation of Human Sexes

1/12/2016


CAN/CSA-ISO/IEC 18000-7-10(R2015)

INFORMATION TECHNOLOGY - RADIO FREQUENCYIDENTIFICATION FOR ITEM MANAGEMENT - PART 7: PARAMETERS FOR ACTIVE AIR INTERFACE COMMUNICATIONS AT 433 MHZ

1/12/2016


CAN/CSA-ISO/IEC 18000-2-10(R2015)

INFORMATION TECHNOLOGY - RADIO FREQUENCYIDENTIFICATION FOR ITEM MANAGEMENT- PART 2: PARAMETERS FOR AIR INTERFACE COMMUNICATIONS BELOW 135 KHZ

1/12/2016



INFORMATION TECHNOLOGY - RADIO FREQUENCYIDENTIFICATION FOR ITEM MANAGEMENT - UNIQUE IDENTIFICATION FOR RF TAGS

1/12/2016



INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATIONAND DATA CAPTURE TECHNIQUES - GS1 APPLICATION IDENTIFIERS AND ASC MH10 DATA IDENTIFIERS AND MAINTENANCE

1/12/2016



INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATIONAND DATA CAPTURE TECHNIQUES - BAR CODE SCANNER AND DECODER PERFORMANCE TESTING

1/12/2016



INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATIONAND DATA CAPTURE TECHNIQUES - EAN/UPC BAR CODE SYMBOLOGY SPECIFICATION

1/12/2016



Information technology - Automatic identification and data capture techniques - Bar code digital imaging and printing performance testing

1/12/2016

Communications / CAN/CSA-ISO/IEC INFORMATION TECHNOLOGY - RADIO FREQUENCY 1/12/2016



Information TR 18047-4:05(R2015)

IDENTIFICATION DEVICE CONFORMANCE TEST METHODS -PART 4: TEST METHODS FOR AIR INTERFACE COMMUNICATIONS AT 2,45 GHZ


CAN/CSA-ISO/IEC TR 18001:05(R2015)

INFORMATION TECHNOLOGY - RADIO FREQUENCYIDENTIFICATION FOR ITEM MANAGEMENT - APPLICATION REQUIREMENTS PROFILES

1/12/2016



INFORMATION TECHNOLOGY - RADIO FREQUENCYIDENTIFICATION (RFID) FOR ITEM MANAGEMENT - DATA PROTOCOL: DATA ENCODING RULES AND LOGICAL MEMORY FUNCTIONS

1/12/2016



INFORMATION TECHNOLOGY - RADIO FREQUENCYIDENTIFICATION (RFID) FOR ITEM MANAGEMENT - DATA PROTOCOL: APPLICATION INTERFACE

1/12/2016


CAN/CSA-ISO/IEC 14496-3-10(R2015)

INFORMATION TECHNOLOGY - CODING OF AUDIO-VISUALOBJECTS - PART 3: AUDIO

1/12/2016


CAN/CSA-ISO/IEC 14496-22-10(R2015)

INFORMATION TECHNOLOGY - CODING OF AUDIO-VISUALOBJECTS - PART 22: OPEN FONT FORMAT

1/12/2016



INFORMATION TECHNOLOGY - MULTIMEDIA FRAMEWORK(MPEG-21) - PART 1: VISION, TECHNOLOGIES AND STRATEGY

1/12/2016


CAN/CSA-ISO/IEC 15444-2-05 (R2015)

Information Technology - JPEG 2000 Image Coding System:Extensions

1/12/2016


CAN/CSA-ISO/IEC 15444-1-05 (R2015)

Information Technology - JPEG 2000 Image Coding System: Core Coding System

1/12/2016


CAN/CSA-ISO/IEC 14496-19:05(R2015)

INFORMATION TECHNOLOGY - CODING OF AUDIO-VISUALOBJECTS - PART 19: SYNTHESIZED TEXTURE STREAM

1/12/2016


CAN/CSA-ISO/IEC 14496-18:05(R2015)

INFORMATION TECHNOLOGY - CODING OF AUDIO-VISUALOBJECTS - PART 18: FONT COMPRESSION AND STREAMING

1/12/2016



INFORMATION TECHNOLOGY - CODING OF AUDIO-VISUALOBJECTS - PART 13: INTELLECTUAL PROPERTY MANAGEMENT

1/12/2016



(R2015) AND PROTECTION (IPMP) EXTENSIONS


CAN/CSA-ISO/IEC 14496-8:05(R2015)

INFORMATION TECHNOLOGY - CODING OF AUDIO-VISUALOBJECTS - PART 8: CARRIAGE OF ISO/IEC 14496 CONTENTS OVER IP NETWORKS

1/12/2016



INFORMATION TECHNOLOGY - CODING OF AUDIO-VISUALOBJECTS - PART 7: OPTIMIZED REFERENCE SOFTWARE FOR CODING OF AUDIOVISUAL OBJECTS

1/12/2016


CAN/CSA-ISO/IEC 14496-2:05(R2015)

INFORMATION TECHNOLOGY - CODING OF AUDIO-VISUALOBJECTS - PART 2: VISUAL

1/12/2016


CAN/CSA-ISO/IEC 13818-11:05(R2015)

INFORMATION TECHNOLOGY - GENERIC CODING OF MOVINGPICTURES AND ASSOCIATED AUDIO INFORMATION - PART 11: IPMP ON MPEG-2 SYSTEMS

1/12/2016


CAN/CSA-ISO/IEC 16500-9:02(R2015)

INFORMATION TECHNOLOGY - GENERIC DIGITAL AUDIO-VISUAL SYSTEMS - PART 9: USAGE INFORMATION PROTOCOLS

1/12/2016


CAN/CSA-ISO/IEC 16500-8:02(R2015)

INFORMATION TECHNOLOGY - GENERIC DIGITAL AUDIO-VISUAL SYSTEMS - PART 8: MANAGEMENT ARCHITECTURE AND PROTOCOLS

1/12/2016


CAN/CSA-ISO/IEC 16500-7:02(R2015)

INFORMATION TECHNOLOGY - GENERIC DIGITAL AUDIO-VISUAL SYSTEMS - PART 7: BASIC SECURITY TOOLS

1/12/2016


CAN/CSA-ISO/IEC 16500-6:02(R2015)

INFORMATION TECHNOLOGY - GENERIC DIGITAL AUDIO-VISUAL SYSTEMS - PART 6: INFORMATION REPRESENTATION

1/12/2016


CAN/CSA-ISO/IEC 16500-5:02(R2015)

INFORMATION TECHNOLOGY - GENERIC DIGITAL AUDIO-VISUAL SYSTEMS - PART 5: HIGH AND MID-LAYER PROTOCOLS

1/12/2016


CAN/CSA-ISO/IEC 16500-4:02(R2015)

INFORMATION TECHNOLOGY - GENERIC DIGITAL AUDIO-VISUAL SYSTEMS - PART 4: LOWER-LAYER PROTOCOLS AND PHYSICAL INTERFACES

1/12/2016


CAN/CSA-ISO/IEC 16500-3:02(R2015)

INFORMATION TECHNOLOGY - GENERIC DIGITAL AUDIO-VISUAL SYSTEMS - PART 3: CONTOURS: TECHNOLOGYDOMAIN

1/12/2016



INFORMATION TECHNOLOGY - GENERIC DIGITAL AUDIO-VISUAL SYSTEMS - PART 2: SYSTEM DYNAMICS, SCENARIOS

1/12/2016



(R2015) AND PROTOCOL REQUIREMENTS


CAN/CSA-ISO/IEC 16500-1:02(R2015)

INFORMATION TECHNOLOGY - GENERIC DIGITAL AUDIO-VISUAL SYSTEMS - PART 1: SYSTEM REFERENCE MODELS AND SCENARIOS

1/12/2016


CAN/CSA-ISO/IEC 13818-3:02(R2015)

INFORMATION TECHNOLOGY - GENERIC CODING OF MOVINGPICTURES AND ASSOCIATED AUDIO INFORMATION - PART 3:AUDIO

1/12/2016


CAN/CSA-ISO/IEC 13818-6:02(R2015)

INFORMATION TECHNOLOGY - GENERIC CODING OF MOVINGPICTURES AND ASSOCIATED AUDIO INFORMATION - PART 6: EXTENSIONS FOR DSM-CC

1/12/2016


CAN/CSA-ISO/IEC 27033-1-10(R2015)

INFORMATION TECHNOLOGY - SECURITY TECHNIQUES -NETWORK SECURITY - PART 1: OVERVIEW AND CONCEPTS

1/12/2016


CAN/CSA-ISO/IEC 18014-2-10(R2015)

INFORMATION TECHNOLOGY - SECURITY TECHNIQUES –TIMESTAMPING SERVICES - PART 2: MECHANISMS PRODUCING INDEPENDENT TOKENS

1/12/2016



INFORMATION TECHNOLOGY - SECURITY TECHNIQUES -INFORMATION SECURITY MANAGEMENT - MEASUREMENT

1/12/2016



INFORMATION TECHNOLOGY - SECURITY TECHNIQUES -INFORMATION SECURITY MANAGEMENT SYSTEM IMPLEMENTATION GUIDANCE

1/12/2016


CAN/CSA-ISO/IEC 18014-3-10(R2015)

INFORMATION TECHNOLOGY - SECURITY TECHNIQUES –TIMESTAMPING SERVICES - PART 3: MECHANISMS PRODUCING LINKED TOKENS

1/12/2016


CAN/CSA-ISO/IEC 15408-1-10(R2015)

INFORMATION TECHNOLOGY - SECURITY TECHNIQUES -EVALUATION CRITERIA FOR IT SECURITY - PART 1: INTRODUCTION AND GENERAL MODEL

1/12/2016


CAN/CSA-ISO/IEC TR 15446-10(R2015)

INFORMATION TECHNOLOGY - SECURITY TECHNIQUES –GUIDE FOR THE PRODUCTION OF PROTECTION PROFILES AND SECURITY TARGETS

1/12/2016


CAN/CSA-ISO/IEC 13888-3-10(R2015)

INFORMATION TECHNOLOGY - SECURITY TECHNIQUES –NONREPUDIATION -PART 3: MECHANISMS USING ASYMMETRICTECHNIQUES

1/12/2016


CAN/CSA-ISO/IEC 13888-1-10(R2015)

INFORMATION TECHNOLOGY - SECURITY TECHNIQUES –NONREPUDIATION -PART 1: GENERAL

1/12/2016




CAN/CSA-ISO/IEC 9798-5-10 (R2015)

INFORMATION TECHNOLOGY - SECURITY TECHNIQUES –ENTITY AUTHENTICATION - PART 5: MECHANISMS USING ZERO KNOWLEDGE TECHNIQUES

1/12/2016


CAN/CSA-ISO/IEC 9798-2-10 (R2015)

INFORMATION TECHNOLOGY - SECURITY TECHNIQUES –ENTITY AUTHENTICATION - PART 2: MECHANISMS USING SYMMETRIC ENCIPHERMENT ALGORITHMS

1/12/2016


CAN/CSA-ISO/IEC 10118-1:02(R2015)

INFORMATION TECHNOLOGY - SECURITY TECHNIQUES – HASHFUNCTIONS - PART 1: GENERAL

1/12/2016



INFORMATION TECHNOLOGY - FUNCTIONAL SAFETYREQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES)

1/12/2016


CAN/CSA-ISO/IEC 18012-1:05(R2015)

INFORMATION TECHNOLOGY - HOME ELECTRONIC SYSTEM -GUIDELINES FOR PRODUCT INTEROPERABILITY - PART 1:INTRODUCTION

1/12/2016



INFORMATION TECHNOLOGY - GENERIC CABLING FOR HOMES 1/12/2016


CAN/CSA-ISO/IEC 14776-150:05(R2015)

INFORMATION TECHNOLOGY - SMALL COMPUTER SYSTEMINTERFACE (SCSI) - PART 150: SERIAL ATTACHED SCSI (SAS)

1/12/2016


CAN/CSA-ISO/IEC 14776-115:05(R2015)

INFORMATION TECHNOLOGY - SMALL COMPUTER SYSTEMINTERFACE (SCSI) - PART 115: PARALLEL INTERFACE-5 (SPI-5)

1/12/2016


CAN/CSA-ISO/IEC 9314-4:02 (R2015)

INFORMATION TECHNOLOGY - FIBRE DISTRIBUTED DATAINTERFACE (FDDI)- PART 4: SINGLE-MODE FIBRE PHYSICAL LAYER MEDIUM DEPENDENT (SMF-PMD)

1/12/2016


CAN/CSA-ISO/IEC 14776-411:02(R2015)

INFORMATION TECHNOLOGY - SCSI-3 ARCHITECTURE MODEL(SCSI-3 SAM)

1/12/2016


CAN/CSA-ISO/IEC 11518-6:02(R2015)

INFORMATION TECHNOLOGY - HIGH-PERFORMANCE PARALLEL INTERFACE - PART 6: PHYSICAL SWITCH CONTROL(HIPPI-SC)

1/12/2016


CAN/CSA-ISO/IEC 11518-2:02(R2015)

INFORMATION TECHNOLOGY - HIGH-PERFORMANCE PARALLEL INTERFACE - PART 2: FRAMING PROTOCOL (HIPPI-FP)

1/12/2016

Communications / CAN/CSA-ISO/IEC- INFORMATION TECHNOLOGY - SMALL COMPUTER SYSTEM 1/12/2016



Information 9316-97 (R2015) INTERFACE - 2


CAN/CSA-ISO/IEC-11518-3-97(R2015)

INFORMATION TECHNOLOGY-HIGH PERFORMANCE PARALLELINTERFACE-PART 3: ENCAPSULATION OF ISO/IEC 8802-2 (IEEE STD 802.2)-LOGICAL LINK CONTROL PROTOCOL DATA UNITS(HIPPI-LE)

1/12/2016


CAN/CSA-ISO/IEC 7942-3:02 (R2015)

INFORMATION TECHNOLOGY - COMPUTER GRAPHICS AND IMAGE PROCESSING - GRAPHICAL KERNEL SYSTEMS (GKS) -PART 3: AUDIT TRAIL

1/12/2016



INFORMATION TECHNOLOGY - DATA INTERCHANGE ON 120 MM AND 80 MM OPTICAL DISK USING +RW FORMAT -CAPACITY: 4,7 GBYTES AND 1,46 GBYTES PER SIDE (RECORDING SPEED UP TO 4X)

1/12/2016



INFORMATION TECHNOLOGY - CASES FOR 120 MM AND 80 MMDVD RAM DISKS

1/12/2016



INFORMATION TECHNOLOGY - 120 MM (4,7 GBYTES PER SIDE) AND 80 MM (1,46 GBYTES PER SIDE) DVD REWRITABLE DISK(DVD-RAM)

1/12/2016



INFORMATION TECHNOLOGY - 80 MM (1,46 GBYTES PER SIDE) AND 120 MM(4,70 GBYTES PER SIDE) DVD RE-RECORDABLE DISK (DVD-RW)

1/12/2016


CAN/CSA-ISO/IEC/IEEE 9945-10 (R2015)

INFORMATION TECHNOLOGY - PORTABLE OPERATING SYSTEM INTERFACE (POSIX®) BASE SPECIFICATIONS, ISSUE 7

1/12/2016



INFORMATION TECHNOLOGY - REQUIREMENTS AND GUIDELINES FOR TEST METHODS SPECIFICATIONS AND TEST METHOD IMPLEMENTATIONS FOR MEASURING CONFORMANCE TO POSIX STANDARDS

1/12/2016



INFORMATION TECHNOLOGY - PROGRAMMING LANGUAGES -M

1/12/2016



INFORMATION TECHNOLOGY - SYNTACTIC METALANGUAGE -EXTENDED BNF

1/12/2016


CAN/CSA-ISO/IEC 13211-1-97(R2015)

INFORMATION TECHNOLOGY-PROGRAMMING LANGUAGES PROLOG - PART 1: GENERAL CORE

1/12/2016


CAN/CSA-ISO/IEC 8859-9:02 (R2015)

INFORMATION TECHNOLOGY - 8-BIT SINGLE-BYTE CODEDGRAPHIC CHARACTER SETS - PART 9: LATIN ALPHABET NO. 5

1/12/2016




CAN/CSA-ISO/IEC 8859-6:02 (R2015)

INFORMATION TECHNOLOGY - 8-BIT SINGLE-BYTE CODEDGRAPHIC CHARACTER SETS - PART 6: LATIN/ARABICALPHABET

1/12/2016


CAN/CSA-ISO/IEC 8859-5:02 (R2015)

INFORMATION TECHNOLOGY - 8-BIT SINGLE-BYTE CODEDGRAPHIC CHARACTER SETS - PART 5: LATIN/CYRILLICALPHABET

1/12/2016


CAN/CSA-ISO/IEC 8859-4:02 (R2015)


1/12/2016


CAN/CSA-ISO/IEC 8859-3:02 (R2015)


1/12/2016


CAN/CSA-ISO/IEC 8859-2:02 (R2015)


1/12/2016


CAN/CSA-ISO/IEC 8859-1:02 (R2015)


1/12/2016


CAN/CSA-ISO/IEC 15693-3-10(R2015)

IDENTIFICATION CARDS - CONTACTLESS INTEGRATEDCIRCUIT CARDS - VICINITY CARDS - PART 3: ANTICOLLISION AND TRANSMISSION PROTOCOL

1/12/2016


CAN/CSA-ISO/IEC 7816-15:05(R2015)

IDENTIFICATION CARDS - INTEGRATED CIRCUIT CARDS - PART 15: CRYPTOGRAPHIC INFORMATION APPLICATION

1/12/2016


CAN/CSA-ISO/IEC 7816-11:05(R2015)

IDENTIFICATION CARDS - INTEGRATED CIRCUIT CARDS - PART 11: PERSONAL VERIFICATION THROUGH BIOMETRIC METHODS

1/12/2016


CAN/CSA-ISO/IEC 7816-9:05 (R2015)

IDENTIFICATION CARDS - INTEGRATED CIRCUIT CARDS - PART 9: COMMANDS FOR CARD MANAGEMENT

1/12/2016


CAN/CSA-ISO/IEC 7816-8:05 (R2015)

IDENTIFICATION CARDS - INTEGRATED CIRCUIT CARDS - PART 8: COMMANDS FOR SECURITY OPERATIONS

1/12/2016


CAN/CSA-ISO/IEC 7816-6:05 (R2015)

IDENTIFICATION CARDS - INTEGRATED CIRCUIT CARDS - PART 6: INTERINDUSTRY DATA ELEMENTS FOR INTERCHANGE

1/12/2016


CAN/CSA-ISO/IEC 7816-5:05 (R2015)

IDENTIFICATION CARDS - INTEGRATED CIRCUIT CARDS - PART 5: REGISTRATION OF APPLICATION PROVIDERS

1/12/2016


CAN/CSA-ISO/IEC 7816-7:02 (R2015)

IDENTIFICATION CARDS - INTEGRATED CIRCUIT(S) CARDSWITH CONTACTS- PART 7: INTERINDUSTRY COMMANDS FOR STRUCTURED CARD QUERY LANGUAGE (SCQL)

1/12/2016




CAN/CSA-ISO/IEC 7816-10:02(R2015)

IDENTIFICATION CARDS - INTEGRATED CIRCUIT(S) CARDSWITH CONTACTS- PART 10: ELECTRONIC SIGNALS AND ANSWER TO RESET FOR SYNCHRONOUS CARDS

1/12/2016



INFORMATION TECHNOLOGY - OPEN SYSTEMSINTERCONNECTION - VIRTUAL TERMINAL BASIC CLASSSERVICE

1/12/2016


CAN/CSA-ISO/IEC 8613-14-01(R2015)

INFORMATION TECHNOLOGY - OPEN DOCUMENT ARCHITECTURE (ODA) AND INTERCHANGE FORMAT: TEMPORAL RELATIONSHIPS AND NON-LINEAR STRUCTURES

1/12/2016



INFORMATION TECHNOLOGY - OPEN SYSTEMSINTERCONNECTION - SESSION SERVICE DEFINITION

1/12/2016


CAN/CSA-ISO/IEC 8823-1-97 (R2015)

INFORMATION TECHNOLOGY-OPEN SYSTEMS INTERCONNECTION CONNECTION-ORIENTED PRESENTATION PROTOCOL: PROTOCOL SPECIFICATION

1/12/2016


CAN/CSA-ISO/IEC 10164-9-97(R2015)

INFORMATION TECHNOLOGY-OPEN SYSTEMS INTERCONNECTION SYSTEMS MANAGEMENT: OBJECTS AND ATTRIBUTES FOR ACCESS CONTROL

1/12/2016


CAN/CSA-ISO/IEC 10164-11-97(R2015)

INFORMATION TECHNOLOGY-OPEN SYSTEMS INTERCONNECTION SYSTEMS MANAGEMENT: METRIC OBJECTS AND ATTRIBUTES

1/12/2016


CAN/CSA-ISO/IEC 10164-10-97(R2015)

INFORMATION TECHNOLOGY-OPEN SYSTEMS INTERCONNECTION SYSTEMS MANAGEMENT: USAGE METERING FUNCTION FOR ACCOUNTING PURPOSES

1/12/2016


CAN/CSA-ISO/IEC 10026-4-97 (R2015)

Information Technology - Open Systems Interconnection - Distributed Transaction Processing - Part 4: Protocol ImplementationConformance Statement (PICS) Proforma

1/12/2016


CAN/CSA-Z243.184-92 (R2015)

Information Processing Systems - Open Systems Interconnection -File Transfer, Access and Management - Part 5: ProtocolImplementation Conformance Statement Proforma

1/12/2016


ISO 6160-1979 PROGRAMMING LANGUAGES - PL/1This is a Reaffirmation of an Endorsed Standard

1/12/2016


ISO 962-1974 INFORMATION PROCESSING - IMPLEMENTATION OF THE 7-BIT CODED CHARACTER SET AND ITS 7-BIT AND 8-BIT EXTENSIONS ON 9-TRACK 12.7 MM (0.5 IN) MAGNETICTAPEThis is a Reaffirmation of an Endorsed Standard

1/12/2016

Communications / CAN/CSA-ISO/IEC SOFTWARE AND SYSTEMS ENGINEERING - SOFTWARE 1/8/2016



Information 20926-10 (R2015) MEASUREMENT - IFPUG FUNCTIONAL SIZE MEASUREMENT METHOD 2009


CAN/CSA-ISO/IEC 15909-1:05(R2015)

SOFTWARE AND SYSTEM ENGINEERING - HIGH-LEVEL PETRINETS - PART 1: CONCEPTS, DEFINITIONS AND GRAPHICALNOTATION

1/8/2016

Life Sciences CAN/CSA-Z256-M87 (R2016)

Safety Code for Material Hoists 1/6/2016

Life Sciences CAN/CSA-Z185-M87 (R2016)

Safety Code for Personnel Hoists 1/6/2016

Life Sciences CAN/CSA-M423-M87 (R2016)

Fire-Resistant Hydraulic Fluids 1/6/2016

Life Sciences CAN/CSA-M427-M91 (R2016)

Fire-Performance and Antistatic Requirements for Ventilation Materials

1/6/2016

Life Sciences CAN/CSA-M430-90 (R2016)

Roof and Rock Bolts, and Accessories 1/6/2016


Hollow Pressurized and Unpressurized Ceramic and Glass Insulators for Use in Electrical Equipment with Rated Voltages Greater Than 1000 V

12/23/2015

Life Sciences CAN/CSA-M5700-09 (R2015)

Tractors for Agriculture and Forestry-Roll-Over-Protective Structures (ROPS) - Static Test Method and Acceptance Conditions

12/22/2015


Installation of Electric Storage Tank and Heat Pump Water Heaters for Residential Use

12/22/2015

Energy CAN/CSA-C273.5-11 (R2015)

Installation of air source heat pumps and air conditioners 12/22/2015

Gas Equipment ANSI Z21.78-2010/CSA 6.20-2010 (R2015)

Combination Gas Controls for Gas Appliances 12/22/2015


Z2010-10 (R2015) Requirements and guidance for organizers of sustainable events 12/21/2015

Electrical / Electronics CAN/CSA-C22.2 No. 144.1-06 (R2015)

Ground-Fault Circuit-Interrupters (Tri-National standard, with UL 943 and NMX-J-520-ANCE)

12/21/2015

Electrical / Electronics CAN/CSA-C22.2 No. 144-M91

Ground Fault Circuit Interrupters 12/21/2015



(R2015)

Electrical / Electronics C22.2 No. 249-96 (R2015)

Standard Tests for Determining Compatibility of Cable-Pulling Lubricants With Wire and Cable

12/21/2015

Electrical / Electronics C57-98 (R2015) Electric Power Connectors for Use in Overhead Line Conductors 12/21/2015

Energy CAN/CSA-C88.1-96(R2015)

Power Transformer and Reactor Bushings 12/21/2015


Performance of self-ballasted compact fluorescent lamps andballasted adapters

12/21/2015

Electrical / Electronics C22.2 No. 66.1-06 (R2015)

Low Voltage Transformers - Part 1: General Requirements 12/9/2015


Low Voltage Transformers - Part 2: General Purpose Transformers 12/9/2015


Low Voltage Transformers - Part 3: Class 2 and Class 3 Transformers 12/9/2015

Electrical / Electronics CAN/CSA-C22.2 NO. 15-M91 (R2015)

Electrically Heated Warming Pads 12/8/2015

Electrical / Electronics C22.2 No. 104-11 (R2015)

Humidifiers 12/8/2015


Energy efficiency of high-intensity discharge (HID) and low-pressure sodium (LPS) lamp ballasts

12/8/2015

Electrical / Electronics CAN/CSA-C22.2 No. 257-06(R2015)

Interconnecting Inverter-Based Micro-Distributed Resources to Distribution Systems

12/8/2015

Withdrawals

The standards listed in this section have been withdrawn. Most withdrawn standards are available from our archived collection. Program Standard Title Date Posted ScopeElectrical / Electronics CAN/CSA-C60044-

6-07 (R2011)Instrument Transformers - Part 6: Requirements for Protective Current Transformers for Transient Performance

2/10/2016


A344.2-05 (R2011) Standard for the Design and Construction of Steel Storage Racks 2/4/2016



Members Only Area | Standards | Shop CSA | Education & TrainingMembership | About CSA | Contact Us | News & Events | Careers | Legal | Privacy

Copyright © 2013 CSA Group. All Rights Reserved.

Energy CGA 1.3-1974 (R2011)

Domestic Hot Plates and Laundry Stoves 2/2/2016

Life Sciences Z795-03 (R2013) Coding of Work Injury or Disease Information 12/21/2015

Formal Interpretations

This section lists questions that individuals have submitted about a particular standard. Each question has been reviewed and answered by the appropriate committee. View Detail

Informs & Certification Notices

This section lists notices that are published by Certification and Testing. An Informs Notice contains information only. A Certification Notice announces changes that may affect product certification. Please allow time for page to load. View Detail



Documents

New Publications Program Standard Title Date Posted … · Detail" will display the scope of the document and other details available on CSA’s Online store. ... IEC 60730-1:2013,