Embed Size (px)
Citation preview
igus – press release
PM1511-EU/7-2011
New polymer ball bearing materials
Four and a half years ago, the news that polymer re-searcher and plain bear-ings expert igus GmbH was moving into the ball bearing business caused quite a stir. Since then, the Cologne-based company has done lots of develop-ment work: five separate “xirodur” materials (two of which were launched this year), many new dimen-sions and a wide range of different designs available ex stock in 24 hours, E-en-gineering tools for design engineers, from 3D CAD downloads through to the online service life calcula-tion program.
Lubricant and maintenance-free “xiros” polymer ball bear-ings can be used at temperatures of up to +150°C, are highly corrosion-resistant, can be washed and cleaned, are non-magnetic and have a low weight. According to igus, they provide an economic alter-native for many applications where the use of con-ventional metallic ball bearings are is problematic.. Product manager Dirk Müller states: “These are ap-plications where the focus is not on maximum load and speed, but on other features such as chemicals or use in liquid media. In such applications, lubri-cants are often washed out of the metallic, sealed and permanently lubricated ball bearings, so that corrosion becomes a problem.” In addition to the lack of lubricant and corrosion, the company says that weight reduction, the avoidance of magnetism, very good friction coefficients and longer service life are further arguments in favour of the use of “xiros” polymer ball bearings.
Deflection rollers: polymer bearings replace metal bearingsThe applications are varied, and range from all kinds of medical equipment, pump and measur-ing technology, through to transport and conveying technolology, particularly in the fields of chemicals, food, laboratories and packaging. One example is Tesa Scribos (Hamburg), expert for solutions relat-ed to protection against fraud and theft, with prod-ucts such as adhesive seals. Radial deep-groove ball bearings made of the polymer material “xiro-dur B180” are installed for material guiding in the coated deflection rollers of various machines. The maintenance-free plastic bearings replace metal ball bearings because these could only be used in oiled versions to achieve lower rolling friction. In ad-dition to the advantages of maintenance freedom and weight saving, “xiros” polymer ball bearings are
igus: growing range of ball bearings, focus on fast delivery
Photo PM1511-01: igus GmbH, CologneThe polymer research and plain bearings expert igus GmbH has been manufacturing plastic ball bearings for four and a half yeats now. The bearings can be used for a wide range of applications. The photo shows lubricant and maintenance-free “xiros” polymer ball bearings in coated deflec-tion rollers installed for material guiding at Tesa Scribos.
igus – press release
PM1511-EU/7-2011
sectors, include the semiconductor industry, paper, textiles and glass industry.
Service life increased by 42 times The second new material from the Cologne-based company is “xirodur D180”. It is four times more wear-resistant than the all-round material for ball bearings, “xirodur B180”. The inner and outer ring are made of the new high-performance material,
about fifty percent cheaper and avail-able more quickly, according to Tesa Scribos. They are now used in the de-flection rollers in the pressure roller before the intermediate drive, where the pressure roller is adjusted with a defined compressive force on the drive roller. The combination of deflection roller/intermediate drive is not only used to drive the product, it also creates web tension in the material.
Already five materials with more than a hundred variantsWithin only four and a half years, the range of “xiros” material has grown from one range to five. The universal range “xirodur B180” and the low-price chemical bearing “xirodur C160” have been added to the high-temperature “xi-rodur A500”. The range of dimensions has also been significantly increased. There are now more than a hundred siz-es, shapes and styles available. These range from radial and axial bearings, multi-purpose bearings for both linear and rotational movements, rotary table bearings, pedestal bearings and flange bearings through to ball bearings and bearings with dust shields. The focus is also always on fast delivery: stock be-ing delivered in 24 hours or the same day, says the company. The standard range is supplemented by tailor-made customer-specific solutions, which are becoming increasingly important.
New: conductive and extremely wear-resistantThis year, igus has developed two new tribologi-cally optimised “xirodur” materials. The first is “xirodur F180” for conductive polymer ball bear-ings. This ESD protection type provides protec-tion from electrostatic discharge. The lubricant and maintenance-free bearings can be used per-manently at temperatures of up to 80 °C Industry
Photo PM1511-02: igus GmbH, CologneNew material “xirodur D180”, extremely wear-resistant for high rotational speeds. The inner and outer ring are made of the new tribologically optimised high-performance material, the cage is made of PA, the balls either of glass or stainless steel.
Picture PM1511-03: igus GmbH, CologneAccording to tests conducted within the company’s in-house Technical Centre, the new “xirodur D180” polymer ball bearings are 72 times more wear-resistant than ball bearings made of PEEK, for example. Alternatives made of PE, PP, PA and POM also remain significantly below this performance level.
igus – press release
PM1511-EU/7-2011
the cage is made of PA, the balls either of glass or stainless steel. The permanent application temper-ature is 80 °C. “xiros D180” polymer ball bearings have been available ex stock since May. They are extremely wear-resistant at high rotational speeds and low loads. Tests in the company’s in-house Technical Centre have shown that the new bear-ings can be 72 times more wear-resistant than ball bearings made of PEEK, also according to igus. ball bearings made of PE, PP, PA and POM all have sig-nificantly shorter service lives than “xirodur D180”. Product manager Dirk Müller: “Ongoing material optimisation along with a comprehensive series of tests have enabled us to increase the service lives of our polymer ball bearings by a factor of 42 since 2007.”
New: service life calculation on the InternetIn addition to its service life calculators for plain bearings, linear bearings, pivoting bearings and semi-finished materials on the igus websites, last year the company also developed an online expert for “xiros” polymer ball bearings. Such E-engineer-ing tools increase speed and convenience, accord-ing to the company, and thus help to reduce process costs. The link www.igus.eu/xiros-life leads straight to the program. There, customers can choose a design size and enter the speed and loads of their application. The material combinations available in the required size are listed in the window “selection of material combinations”. The customer can then print off the result, giving a lifetime in thousands of hours.
Photo PM1511-05: igus GmbH, CologneThe new online service life calculator for “xiros” polymer ball bear-ings. The link www.igus.eu/xiros-life leads straight to the program. There, design engineers can choose a design size and enter the speed and loads of their application.
Picture PM1511-04: igus GmbH, CologneThere are no less than five “xiros” materials available ex stock, and there are a wide range of new dimensions, shapes and styles avail-able. From the left, examples of radial deep-grooved ball bearings “xirodur B180”, ball bearings for absorbing axial forces, lubricant-free ball caster for transporting sensitive goods.
PRESS CONTACT:
André KluthHead of Corporate Communications
igus GmbHSpicher Str. 1aD-51147 KölnPhone +49-22 03 / 96 49-0Fax +49-22 03 / 96 [email protected]
DIN ISO 9001:2008
The terms “igus, chainflex, readycable, easychain, e-chain, e-chainsystems, energy chain, energy chain system, flizz, readychain, triflex, twisterchain, drylin, iglidur, igubal, xiros, xirodur, plastics for longer life, manus, vector“ are legally protected trademarks in the Federal Republic of Germany and, where applicable, in some foreign countries.
