Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
UNCLASSIFIED
AD NUMBER
AD045680
NEW LIMITATION CHANGE
TOApproved for public release, distributionunlimited
FROMDistribution authorized to U.S. Gov't.agencies and their contractors;Administrative/Operational Use; Aug 1954.Other requests shall be referred to Officeof Naval Research, Arlington, VA.
AUTHORITY
ONR ltr, 26 Oct 1977
THIS PAGE IS UNCLASSIFIED
THIS REPORT HAS BEEN DELIMITED
AND CLEARED FOR PUBLIC RELEASE
UNDER DOD DIRECTIVE 5200.20 AND
NO RESTRICTIONS ARE IMPOSED UPON
ITS USE AND DISCLOSURE.
DISTRIBUTION STATEMENT A
APPROVED FOR PUBLIC RELEASE;
DISTRIBUTION UNLIMITED,
llrmed Services I echnical Inf-ormation ilgencBecause of our limited supply, you are requested to return this copy WHEN IT HAS SERVEDYOUR PURPOSE so that it may be made available to other, reouesters. Your cooperationwill be appreciated.
!'
Si
NOTICE: WHEN GOVERNMENT OR OTHER DRAWINGS, SPECIFICATIONS OR OTHER DATAXREU-BD FOR ANY PURPOSE OTHER THAN IN CONNECTION WITH A DEFINITELY RELATEDGOVERNMENT PROCUREMENT OPERATION, THE U. S. GOVERNMENT THEREBY INCURSNO RESPONSIBILITY, NOR ANY OBLIGATION WHATSOEVER; AND THE FACT THAT THEGOVERNMENT MAY HAVE FORMULATED, FURNISHED, OR IN ANY WAY SUPPLIED THESAID DRAWINGS, SPECIFICATIONS, OR OTHER DATA IS NOT TO BE REGARDED BYIMPLICATION OR OTHERWISE AS IN ANY MANNER LICENSING THE HOLDER OR ANY OTHERPERSON OR CORPORATION, OR CONVEYING ANY RIGHTS OR.PERMISSION TO MANUFACTUDFUSE OR SELL ANY PATENTED INVENTION THAT'MAY IN ANY WAY BE RELATED THERETO.
•Reprcduced by Best Available Cop,DOCUMENT SERVICE CENTER
KNOTT BUILDING, DAYTON, 2, OHIO1 NCLASSI Fl E D[!UNLA
W H l
Aw.A
THE ROTATING ARM RESOLVING ANEMOMIETER
'4 Office of Naval Research Navy DepartmniotContract N7 onm-48705 PoetN 8-1
I Technical Report No. 2
:~A. K N Project 59 - Reference 54-56TI j, Arold H. Glaser
August 1954
Research Conducted 1hra-.-gh the
~~e ~ ~CasX1 A.L4./Narh ?M 0atoCOLLEGE STATION, TEXAS
Oll
JM ;iiii~ll I'i i
`I
THE AGRICULTURAL AND MECHANICAL COLLEGE OF TEXASDepartment of Oceanography
College Station, Texas
Research conducted through the
Texas A & M Research Foundation
Technical Report No. 2
A&M Project 59 Reference 54-56T
THE ROTATING ARM RESOLVING ANEMOMETIE
by
Arnold H. Glaser
August 195.4
The research reported in this document has been made possiblethrough support and sponsorship extended by the Office of NavalResearch under Contract N7onr-48705, NR No. 082-ill. It ispublished for technical information only, and does not neces-
Ik sarily reprs-ent recommendations or conclusions of the sponsor-ing agency.
John C. Freeman, Jr., Project Supervisor
5I
/:. !I
THE AGRICULTURAL AND MECHANICAL COLLEGE OF TEXASDepartment of Oceanography
College Station, Texas
Research conducted through the
Texas A & M Research Foundation
Technical Report No. 2
A&1 Project 59 Reference 54-56T
THE ROTATING ARM RESOLVING ANEMOMETER
by
Arnold H. Glaser
August 1954
The research reported in this document has been made possiblethrough support and sponsorship extended by the Office of NavalResearch under Contract N7.nr-48705, NM No. 082-111. It ispublished for technical information only, and does not neces-sarily reprezent recommendations or conclusions of the sponsor-ing agency.
John C. Freeman, Jr., Project Supervisor
K.
CONTENTS
Page
I. Introducticn 1
II. Principle of Operation 3
A. Some Aerodynamic Properties of the Cylinder 3
B. The Rotating Arm 4
C. Obtaining the Wind Velocity 5
D. The Shearing Stress 6
E. Effect of Cross Wind 7
F. Conclusion 8
III. Mechanical Features 9
IV. Electronic Circuitry 30
V. Performance 13
A. Geaeral 13
B. L1t Winds 13
C. Comparison with Other Instruments 14
VI. Proposed Future Development 14
A. Fluameter 14
B. Counter Rotating Aizs System 14
VII. Concluding Remarks 15
I. Introduction
An instrument that can resolve the instantaneous motion at a
point into components, or equivalently, indicate the vector direction and
magntude of -the instantaneous wind is of great utility in the study of
the details of the structua'e of tux~oulent motion in the atmosphere and
czean. Tim:e constants should be cufficiently short to permit the re-
solution of at least the significant range of turbulent eddies (Inoue 1954).
Instruments of this type have their greatest utility, apart from
est:Lates of the statistical properties of the turbulent velocity field,
in studies of the vertical flux of heat, moisture) or momentum. These
aro oLttined throueh the relation
F= pw9
whocre F is t',e vertical flux of the intensive property C, ,
instantaneous vertical component of the wind velocity, and the bar in-
dicates averaginr over a period of time sufficiently great to assure
reprezentation of significant eddy sizes (Swinbank, 1951; MacCready,
1953b).
Two types of in.strument have previously emerged that at least
pa:-tially satisfy the requirements of rapid response and vector resolu-
tion. One is based on the use of the bi-directional vane (Mazzarelia,
1952; Gill, 1954b) to dete-n=ne the direction of the flow and a fast re-
sponse w-emometer of some type (Parson and Bunker, 1952; Gill, 1954a).
Velocity components are obtained by appropriate trigonometric calcula-
tiozis. _This tpe of instrument tends to be hampered by the rather com-
plex response of the bivane system.
A �, . • . •: :
The other type in use makes use of geometric combinations of hot
wire type instruments to determine both direction and velocity. (Shiotani,
1950 Swinbank, 1951; MacCready, 1953a). This type 1has the advantage
of cxcellent speed of response, but it is somewhat difficult to make the
indications of the instrument independent of atmospheric temperature.
Nearly all of these systems suffer from the basic non-iinearity
of the indicating system. Calculation of the flux of a p-ope:lty from
eq1lation (1) calls for the recording of the various instrument outputs,
reading from the charts at very close intervals of time, conversion of
* the non-linear indication to the actual value, performing the trifono-
metric resolution, and finally the multiplication and integration in-
dicated. If one is seeking the contribution of eddies of 0.1 second
rassage time, thiis process must be repeated each 0.05 second. Evalua-
tion of even a 5-.minute run becomes a sizeable task.
The extreme amount of calculation required makes it desirable to
use some foim of automatic calculation, either analog or digital, to
"pe.•miat somewhat more extended observations. Digital calculation can
cope with the non-linearity of rapid response instruments, but the prob-
* len of sufficiently rapid digitizing of all the quantities has not yet
been met by simple means. Analog computers offer more promise of satis-
factory performance without undue complication. Various analog methods
have been adopted to linearize the indication of hot-.ire instruments.
Parson and Bunker (1952) used a servo-operated cam system, while
MacCready used a some-what complex electronic system. Neither system gave
the flux without further cor.mputation.
* The original concept of the instrument to be described arose during
a discussion with Professor V. E. Suomi of the University of W'-isconsin
while the author was employed on an 'Air Force Cambridge Research Center
S2-
project urder Professor Suo.i. Detailed development of the princinles
and design of tl.e instrimuent ax.d computers was done by thl. present
project.
This cner:o.eter systCm was desigtred to operate directly with an
aualorg ce OrPute'" to g'ive intfC:&tcd vCAluus of the vertical flux of heat,
mn-osture, and rzomcntur. It is iLftended for continuous ope-.-ation, with
average vclues of the f.Luxes presented .eriodically, although instantane-
ous values of any of the meas*ued quantities are readily available. The
anemoueter offers linea:ity a-±d i'tLggedciess in return for some increv.se
in complication awd some aniomalies of function that will be described
S. later.
II. Princinle of Opei-ation
A. Some aeiodyna.ic prope;'ties of the cylinder
Let us exornine some of the aerodynamic pý-cperties cf the circular
cylinder. if a cylinder be plpced in a flow with its axis peipendicular
to tae direction of flow, it can be sho.;n (Milne - Thomson, 19w0, p. 152)
that the pressute distribution about the cylinder for the case of non-
viscous irrotational flow is
1/2 -r T/ ? (1- 4 sin 2F) (2)
where p is the i.:reksure rt the surface of the cylinder, i is the
static pre.,ure, pis the air density, U is the free-stream velocity,
anr i is the angle between the radius to the poit at the surface and
the direction of the flow.
Otservation shows (Mlilne-Thonrpson, 1950, IP. 152) that in real
viocous flow:s, the pressure distribution about the forward part, within
about 300 of the flow di'-ection, approximates the theoretical distribution.
* -3•-
~•.,
The pressure distribution ,.hows little r'elation to the theoretical over
the rcst of the surface of the cyllnder.
If the axis of the cylinder be inclined to the direction of the
flow, we find, in theory, that the flow may be resolved into two compo-
nur'tc. one clong the cylindler, producing no change of pressure at the our-
face of the cylinder; the other perpendicul.ar to the cylinder, producing
the pressure distribution of equation (2) but with TT now replaced by
Un - tile normal componcrt of flow. 'While experimental data is not
re.dily available; it does apPear' that this resolution is achieved v.rith
some accuracy over the region of validity of equation (2), particularly
if the flow strikes the cylinder at near right angles.
B. The Rotatln. irra
Let us take a cylinder such as we have described and rotate it
abcut an af4s i:ePc-jnicular to the axis of the cylinder (Figure 1). Let
the axis of rotation be hoi'izontal, and let the direction of the mean
wind lie in the plane of rotation of the cylinder. At time t, the
cylinder, being rotated with vmngular velocity W•, is at an angle Q to
V•{, the horizontal. i.t the samie time, the projection V of the w.rind vector
*- • on the plane of rotation makes an angle U with the horizontal, a
being positive for winds with an upw..ard comnponent, ' small pressure hole
is located on the leading edge of the cylinder at distance R from its
a;is of ro'at.on.
Le- us fo-' the i..omnent ignore winda out of the plane of rotation
of the c.ilinder. In FiGure 1, the component of the wind normal to the
cyliinde i.-
"Vn V sin(Q a)
-4
If we let 0 = wt(arm horizontal at t = W), the pressure on
the hole will be given by
p+ V]n 2 + V sin .(Wt =o)]
ia [LU21j2 2wRV sin c cos wt + 2twRV cos or sin Wat +
V2 V2 V2
V- V Cos 20ccos 2ct - 2 sin 2cosin 2wt2
It will be noted that aside from non-periodic terms, first and
second harmonlic terms are present, the first harmonic terms linear in
V, the second harmonic quadratic. It is of interest to note that the
first harmonic is a linear measure of wind speed; it is from this that
the power of this method is derived.
The pressure present at the pressure hole may be piped down hollow
shafting and converted to an alternating voltage by an appropriate pressure
transducer. Some attention must be paid to the ducting to avoid attenua-
tion of the pressure wave. Since the pressure hole is necessarily small,
it is essential that the amount of air movement through the hole be kept
as slight as possible to prevent serious pressure drops at that point.
This is accomplished principally by the use of a transducer with a stiff
diaphragm. Compressibility effects are negligible unless the ducting has
large volume. Resonance is avoided by keeping the duct shorter than a
quarter-wave organ pipe of the highest frequency to be measured.
Ixa-ne voltage output of the trazsducer will beA p, where R is the
appropriate factor of proportionality.
C. Obtaining the wind velocity
A number of methods may be used to recover the wind velocity'-.
Filtering is the most obvious, but does not easily permit the recovery of
p 5
the angle of the wind. The method chosen here is phase rectification,
which makes use of the familiar orthogonality principles:"•/ O• (5)
Lim 1 sinat siulbtdt Lir cos at cos bt dt O (a b)
and Lim inat cos bt dt= 0
Lm 1 2Lim 1j 2Li sin2at dt cooatdt(6)
S j
so that if we zuultiply/tp from (3) electrically by sin iut and obtain
an average, we haeve
. *,i/P s!nut dt 2 I ,•P,(Vcos.) (7)
The approximation impro-res with increase of averaging time *-', but if the
spectra of V and o- 6o not contain significant harmonic components of
frequency •' the approximation is excellent after a very few cyces.
The quantity V coso- will be recognized as the horizontal com-
ponent of the wind velocity in tue p:.ane of rotation of the cylinder. If
we muitiply/, p by cos wt and integrate, we have
r c cos t dt = wR(Vsin.) (8)
where the quantity V sin o4 is the vertical component of the wind velocity.
The Lorizontal and vertical components may be separately recorded.
D. Th-e Shearing Str'ecs
A rather surprising feature of the instrument appears if we iso-
late the second haimonic coiisponent of the pressure signal by multiplying
by sin 2 cj t and aveo'aging:
Tp sin 2wt dt-"'O- sin 2 (9)
o 6
Since V2 sin 2e= 2 V2 sin ae cos c,
rin 2wt dt - o p(V sinc) (V cosc) 2o
where -,uw will be recognized as the shearing stress or the vertical
flux of horizontal riementum. Because of calibration difficulties, this
relation has not yet been exploited, but it is planned to do so at the
earliest opportunity.
E. Effect of cross wind
SThus far it has been assumed that the wind is in the plane of ro-
tation of the cylinder. In General, the wind will have an additional
componcnt perpendicular to the plane of rotation. It would be desirable
that the instrument ignore this component, so that direct readings of u
end w may be obtained. It can readily be seen that this condition would
be satisfied if equation (2) readPd x=1 2 2 (1- 3t u I 09 O (c)
d. 2
This differs from equation (2) by
P 1 - U2 su2 (12)2
or fractionally,
'2 = -. tan2 1 (13)Pd -
Shas its maxinum value when the cylinder is retreating with the
wind
t:an fmax 4v (l).R -V
where v is the cross-com.onent of the wind, the other notation as before.
The minimum value is found where the: cylinder is advancing into the wind
tan .inn .R(15)
"-7-
It will be seen that this varyi4 p gives rise to a spurious
pressure alternation of amplitude approximatelV
t~'I~ "'R [(~ 2V)2 (WR +V)2 +v ]=R vt + V2 + v2)2] (16)
and of the same phase (but opposite sign) as the first harmonic oWRV.
In a typical case, we may take
V=a = 0. 3 V (Friedman, 1953) (17)
Then the bracketed quantity in equation (16) has the value .053,
corresponding to a decrease in instrument response of some 5%.
While this quantity is by no means insignificantp, it cannot be con-
sidered as a source of major error.
F. Conclusion
It will be seen from the foregoing that the principle of operation,
while perhaps somewhat involved trigonometricaliy, is reasonably straight-
*! forward. Perhaps the most attractive feature of the instrument is its en-
forced linearity of operation; any non-linearity appearing at any point in
the alternating pressure or voltage system appears as a higher harmonic,
and is rejected by the rectification system. Tests of the system have
shown such false higher harmonics to be insignificant in magnitude.
i -8-
-. - - .. O-S
III. Mechanical Features
The first model of the resolving annemorticter, which forms the subject of
this report, was rather elementary in construction and perhaps somewhat crude.
It consisted of an angJle iron frar.ework supporting the rotating arm
mcchanisrn at 120 cm from the ground. It was oriented into the mean wind by
hazd. The m.echanism was dcsigne" to rotate a short arm at 1500 rpn. This
rmlatively high rate of rotation was chosen because of the convenience of the
25 cycles per second fi'equenc, produced and because of the availability of
stendard 25 and 50 cycle components for computational use.
Details of const:-uction"
(1) A hollow shaft (one-,ie.lf inch outside diameter) supported by bear-
ings at each end. with provision for mounting the rotating arm at the center
of the shaft.
(2) One of the bear'ings forms a rotating shaft seal to permit trans-
mission of the pressure to a stationary pressure transducer.
(3) Drive shafting and gearing to peimit rotation of the shaft by a
rather bulky icotor without interference with the air stream. The right-
angle kea.Jing was through unenclosed spiral miter gears, speed reduction at
the n.otor through unenclosed fiber and steel spur gears. Rates of rotation
were somewhat excessive for this type of gearing, and it was found impossible
to keep e.en special coxn-picher grease on them. As a result they howled
diszressingly, although wear did not seeri serious.
(4) Generator to produce the necessary reference voltage at phases
fixed w-ith respect to the position of the rotating arm. An Electric
Indicator Co. type F-16 A-C rate generator was used, providing two alter-
natJng voltages of excellent harmonic purity and quite accurately in quad-
rature with each other. This was geared to the drive motor to produce a
- 9
frequency of 25 cycies per second. Provision was made for rotational
adjustment of the body of the generator to permit accurate phasing.
(5) Drive motor, Bodine synchronous type USY-55, 1/8 h.p. A
synchronous motor was chosen to permit accurate maintenance of rate of
rotation, so that calibration would be as stable as possible and rotational
transients would be minimized. The sjnclronous motor is consi.derably bulkier
than an ordinary A-C motor of the same power, and somewhat noisier.
(6) Pressure transducer, Statham Laboratories Model P58-0.15D-i400,
chosen for its sunsitivity and its high resonant frequency (275 cps), which
permits it to follow the relatively high frequenoy alternating pressure
(25 and 10 cps) without c;,tt•..uation or distortion. The transducer was
shockmounted together with its preanplifier and connected to the rotating
pressure joint by a short length of stiff plastic tubing. The total pneu-
matic circuit was about 40 cm in length, which coapares quite favorably w.rith
the 166 cm lengtii of a 50-cycle 1/4-wave organ pipe.
(7) The rotating arm itself. A number of different configurations
were tried, but none seemed any more effective than a simple cylindrical
tube of 3 16 inch outside diameter, 15 cm in length, with a .045 inch hole
drilled about 12 cm from the axis of rotation. This produced a circum- -
'ferertial speed of the pressure hole of just under 20 m isecond at a rota-
tional rate of 25 rps.
The total ensemble was somewhat bulky and distinctly noisy in
operation. An improved model, under construction at the time of this report,
will have better characteristics.
IV. Electronic Circuitri
* A wide range of electronic circuits may be used, probably with equal
success, to reduce the electrical output of the pressure transducer
- 10 -
'I""
_ _ _ _ _ -
(equation If) to the desired form for recording. Each must perform the
folloviiig orexrations:
(1) Amplification of the relatively weak signeal from the pressure
transducer.
(2) Phase demodulation. This is essentially multiplication by the
a_,propriate trigonometric function. (See equation (7)).
(3) Integration. This may be an actual integration, but resistance-
capacitance pseudo-integration is far riore convenient for purposes of in-
d:*.cation. The time constant of the resistance-capacitance integrator estab-
lishes the effective time constant of the instrtmient.
Al•,i. circuits that have been used in this first model are quite
standard and 'rilL no• be reproduced here. Figure 2 gives a block diagram
of the sstem.
The pressure transducer is of a strain-gauge bridge type, producing
a sigrnal of the oider of a few millivolts. ,2.plification brings it up to a
few volts amplitude.
The phuse rectifiers chosen were of the type using addition of
voltag4es at the grids of a paIr of push-pull cathode follow;ers. This type
of rectifier niuitiplies the input signal by *:hat is essentially a square
wave i-ather than by a sine function. A square iave is composed only of
odd harmonics, so that there is nothing in the input signal that will pro-
duce spurious reuponse. Any odd harmonics generated by harmonic distortion
in the transducer or amplifier will be recovered at this point.
The phase rectifiers contain as an integral part the resistance-
capacitance network that produces pseudo-integration (a running meaning
process). Time constants were set at 0.5 seconds to produce a reasonably
smooth record on the recorder used. Tnis relatively large time constant
- 11 -
F IGURE 2ROT. ARM
PRESS. AMP PHASE R-C
X-DUCER P RECT. INT.
ROTATING ARM ANEMOMETERCOMPUTER SYSTEM
.,
R E. -------. .. • •.
is a matter of convenience rather than of necessity; it represents 12.5
cycles at 25 cps, which is probably mole than enough to make the approxi.-
mation of equation (7) excellent for most atmospheric conditions.
A two-ckA.nxel Brush recorder was used to produce a graphic record,
with 1 cm o2 chait length representing one second. The speed of response
of the recorder is so high that it does not add appreciably to the time
constant of the system. Appropriate scalin- voltage 6ividers were intro-
duced earlier in the System to expand the scale of the vertical component
relativ,°e to that of the horizontal.
Isolating amplifiers with negligible phase shift were introduced
between the reference voltaZe generator and the phase rectifiers las•ely
as a precautionary measwue.
Once the few initial "bts" were removed, the electrornc system
peiforned fairlyv atisfactorily.
- 12 -
77.1 ,
V. Performance
A. Generl&.
The basic instrinueznt was tested at the Air Force Cvlabridge Research
Center's Great Plains Turbulence Field Prograri, held at O'Neill, Nebraska,
during AMSust and the early paý-t of September 1955. It functioned apprcxi-
mat ely a4 calculated under all but light wind conditions, when the rotating
a= Zet ur a circulatron that gave completely spurious results.
Figure 3 shows a short length of the record obtained with the
S, instrument. The excellent time resolutions will be noted, as well as the
relatively open scale for the vertical velocity.
Actual operation of the inst:'t=ment ras somewhat more complex than
had been originally hoped. It was found that the D-C output of the phase
rectiftiers had a strong tendency to drift in spite of the relatively high
levels at w.hich they were operated. This necessitated frequent zeroing
of the apyaratus. The phase rectifiers occasionally overloaded on strong
transients and would give obviously spurious indications until they hadrecovered from the overload. h�'is prevented operation at anw.here near
f,'ll-scale of the recorder, and required frequent range-switchling as wind
velocities asd turbulence increased or decreased.
B. Light Winds
0eration in light winds set up a whirl about the rotating arm
that gave a record suggesting the wind approaching the instrument at some
angle to the horizontal. For not-too-light winds, this angle was not too
great, and could fairly well be compensated for by a slight rotation of
the phase of the reference voltages. However, it is felt that this pro-
cedure has little to recommend it, as it is not known to, what extent this
may distozt the record.
-15-
_ II t . . _ - . . . . . . ...i /.- . - • - . . . . . . . - ' . ; - .
- -r- -7 -T-. -
• .• • • ", ... k_...L -. +,.--..+-.• "- .- ', " - - " - - - ,-
-i ,r--*--1--i-----T I
iIXI LLA2 evrA rimsU 4.ew *vA~faO1 ffEffW6UASA 3~4~ /~3 CART NO0. BL 0
" I'] - T - ' , "I I !
I_ _ L ± • I . " L - _ . . . . + -- - . - - . + -+ - - . - -
A SAMPLE RECORD -- FIGURE 3
O;*
•- . . . . .. . . . . . . . . . . . . . . . . .. . . . . . . .. r /-- - -l . ,8,e ".A1 " ."I"A , .
Figure 4 shows the apparent engle of the wind found for a 1/4."
diameter cylindrical arm. Data are not yet available to indicate the
relation of cylinder diameter to this effect. As a rough estimate, it
might be anticipated that it will be in proportion to the diameter and
wo-ld be reduced for a streamlined nrofile.
C. Comnparison with other Instruments
Unfortunately, it was not possible to make a side-by-side comparison
of the output of the rotating arm anemometer with another instrument measur-
ing the same quantities. An attempt was made to compare it with the Sonic
Anemometer of Prof. Suomi. of the University of Wisconsin, but because of
dissimilar presentations of data, only very general egreement could be
established.
The cbservations made at O'Neill will be the suboct of another
re-;ort.
VI. Proposed Further Development
.A. Fluxmeter
The circuit of Figure 2 may be expanded wzithout great increase of
comple'Jty to that of a flu:m~eter for the measurement of the vertical flux
of heat or moisture. In this case, multiplication of the velocity by the
tempe::ature or by the mixing ratio may be accomplished by passing the signal
from the transducer through an appropriate resistance bridge circuit before
phase demodulation.
B. Cour ter-: otating Armn System
Design calculations indicate that much of the error resulting from
the circuia-uion caused by the arm in low wind speeds can be avoided by
building the instrument with tvo counter-rotating arms, the difference in
- 14 -
DIRECTIONAL ERROR AT
40 'LOW WIND SPEEDS
30
20-DEGREES
ERROR
10 0
0 1 2 3 4 6 7
M/SEC
SME A N H O R IZ O N TA L V E L O C IT Y
FIGURE 4
I.'I..A
pressure between the tv.-o leading edges being measured. The signal corre-
sponding to the horizontal velocity is cancelled out, however. This causes
some loss of general utility, but is, if anything, desirable for use of the
ir.strzwent as a -'ertical flu.neter. Cancellation of the relatively large
horizontal signal permiita greater accuracy in the handling of the vertical
ccm.mic:nt,. It is feuad thathe only other signal retained after cancel-
lation is that of tLe shecaring stress (see ceuation (1O)), which should be-
come quite manageable. Such a counter-rotating arri sr.,stem with associated
gearing anC. pressu:-e dtvcting is under construction.
VII. Concludinm Reniaros
The rotating arm ane..ometer as presented here, wuhile not a finished
instrumcnt, shows enough promise of becoming a useful addition to the in- -
str mientation of micrometeorology to justify the further development out-
linQc. above.
Pcrhc.ps it- g.-eatest utili'ty may come in introducing a somewhat new
concept in msteovological instrumeatation - that of rotating a sensing
element in a field of a vaxriab~le. A fairly obvicus example is the rotation
of a thermnl eleuient in a la:'ge ver'tical circle to measure the vertical
Gralient of temperature. The use of a si.gle element eliLinates many of
the difficulties fcequent].y er.countered with this measurearent.
11t is believed t,-at the completed fluxaeter asser.bly will be capable
of amassing large quantities cf useful data in easily assimilable fornn. If
its operation can be reduced to a fairly si.rile routine, it may become of
consideý:able util.ityr iii gine;ýal micrometeorological research•.
IA
R VFEREINCES
Friedman. Dor G., 1957: The height variation of lateral gustiness anditbs e'ftect on lateral diffwuion, J. Met.. IO 372-79-'
Gill, G. C., 1354: A fast response anem.ometer for ricrometeorologicalinvest12ation6, BAMZ 55, 69-75.
Gill, G. C.; 19'l4b: L fast response bivano for micrometeorologicalinvestigations, (to be published).
Inoue, Eiich., 2.954: On the smallest scale of turbulence in the atnosishere,Texas P. & M nesearch Foundation, 01 contract 1U7onr-48705,Technical Report No. 1.
.MacCready, Paul B., Jr., 1955a: Atmospheric tui-bulence measurements anda.).Lysis, J. let. 10, 525-357.
MacCrez.dy, Paul B.1 Jr., 195,7b: Structure of atmospheric turbulence,! J. Ilet. 1C, 4ý4-449.
Mazzarella, Daniel A., 1952: An all weather, remote recording b-vane,BP'IS 35, 6o0-66.
Milne -Thomp.son, L. 1., 1950: "Theoretical ?'vdrodynamics", Nevi York,. aC il..'l•an.
Parson, D., Jr. and A. F. Burke-, 1952: A recording co.'.puter for. thedirect measurcner.t c-f the turbulent heat exchange in the at-mosohere, Interi.atiore.l Cymosium on At::ios-heric Turbulencein the bo~urdaly ieyýr, M. I. T., Air Force Combridee ResecrchCenter, Geo•,hysical Research Papers No. 10, 369-379.
ShLotani, M., 1950: Turbulence in the lcweuit layers of the atmosphere,Sci. Rej. of the T&hoku Univ., Ser. 5,_2, 167-201.
Swinbank, 14. C., 1951: The m.easurement cf ver-tical transfer of heat andweatcr vapor by eddles in the lower atmnosphere, J. Met._8, 133-145.
L.
a . . .....
b tOEJr 5"; Distribution List
0-ophysics Branch Bureau of Ships, Navy DepartmentOffice nf Nuva: Rtsearch lashington 25. D.C.Washington 2S. D.C. Attni Code 851. (Special Devices Center)(1)Alto: Code 416 (2)
Bureau of Ships, Navy DepartmentDirector. Naval Research Laboratory Washington 25. D.C.Washington 25. D.C. Attn: Code 327. (Tethnical Library) (2)
Attn: Technical Information Officer (6)Chief of Naval Operations
Officer-in-Charge Navy Departmentiffice of Naval Research Washinkton 25, D.C.
L.ondtn Branch Office Attn: Op-S33D (2)Navy No. 100, Fleet Post OfficeNew York. New York (2) Oceanographic Division
U. S. Navy hydrographic OfficeOffice of Naval Research iranch Office Suitland. Maryland (1)346 BroadwayNew York 13, New York (1) Library, Naval Ordnance Test Station
Inyokern, China Lake. Calaforria (1)Office of Navel Research Branch Office
The John Crerar Library Building Project AROVA, U. S. Naval Air Staticn8 East Randolph Street, Tenth Floor Building R-48Chicago. illinois (1) Norfolk. Virginia f2)
Office.of Naval Research brunch.Office The Chief1030 East Green Streot Armed Forces Special Weapons ProjectPasadena 1, California (1) P. 0, Biox 2610
Washingt on, D.C. (1)Office of Naval Research Branch Office
1000 eevary Street Office of the Chief Signal OfficerSon Francisco, California (1) Engineering and Technical Service
Washington 25. D.C.Office of Technical Services Attn: SIGGG1 (1)Derartment of Cnmm•.rcpWashington 2S, D.C. (1) Meteorological Branch
Evnns Signal LaboratoryArmed Services Tech. Information Center oelmar, New Jersey (1)Documents Service CenterKnott Building Office of the Quartermaster GeneralDayton 2. Ohio (5) 2nd and T. St4.
Washington 25. D.C.Assistant Secretary of Defrnie for Attn: Environmental Protection Section(l)
Research & DevelopmentPentagon Building Commanding OfficerVa'ihington 2S, D.C. Air Force Cambridge Research Ccnter
Attn: Com. on Geophysics & Geography (1) 230 Alhany StreetCambridge, Massachusetts
Mr. Francis M. Lucas Attn: L£RS-I (1)ONR Resident RepresentativeUniversity of Texas Headquarters, Air Weather ServiceMain Building. Room 2506 Andrews A. F. baseAustin 12. Texas (1) Washington ?0, D.C.
Atto; Director Scientific Services (2)* Department of AerologyU. S. Naval Postgraduate School Offic,! j! thi' Chief. .. Cimicsl Corps .Monterey. California (1) Research and Engineering Division
Reseorch iiranch
Aerology Branch Army Chemical Center, Maryland (2)Bureau of Aeronautics (Ma-5)Navy Department Commanding General, Air Materiel CommandWashington 25. D.C. (I) Wrifht Fi.ld
Dayton, OhioMechanics Divisi,,n Attn; MCNEEO (1)Naval Research LaboratoryAnscostia Station Commandir- GoneralWashington 20. D.C. Air Force Cambridge Research Center
Attn: J. E. Dinger. Code 3820 (1) 230 Albany StreetCambridge. Massachusetts
Radio Division 1. Code 3420 Attn: CRHSL (1)Naril Research LaboratoryAns:ostia Station Commnanding GeneralWa-lhington 20. D C. (1) Air Reseasch It Development Command
r.o.uox a39smeteorology Section inltniort 3, MaryldndNavy Llectronies Laboratory At'n: RDDG (1)San Die.go 52, California
Attn: L. J. Anderson (1) Derartment of MeteorologyMassachusetts Institute of Technoiagy
Library, Naval. Ordnance Laboratory Cambridge, MassachusettsWhite Oak Attn: e. G. ioughtoor (1)Silver Spring 19, Maryland (1)
PRoJ)ECT SO: Distributiton !.st-Cont'd
D'Ppartn&Lont of h&etcorology Goeranrl E~lectric, Resviirch LaboratoryLnive'rsity of Chiciogo Schiiev'tadcy. New YorkOiicnito 37. Illinois Attn: V. Schanefer (1)-Attn: H. RC, Dyers (1)
Co.ophysical InstituteInstitute for Aolvineed Studly University of AlasxkaPrinceton. New Jersey College, Alaskit
Attit: J. von Neumasnn (1) At ti: C. T. Elvey (1)
Serippa Intititutioga of Oceanography Blue Hlli Metearclogical OliservatoryLa Jailsa. C~alifornial Harvard University
Attit: R. Reve~lle (1) Milton .96, MassachusettsAttn: C. Brooks (f~)
General Flectric Research LaboratorySetanectarly. New York Litboraturv of Climatology
Attn: 1. Laii6,muir (1) Johns Hopkins LniversitySoplhrook-, New Jersey (1)
St. Louis University3'týtl Olive Street Departmnent of MeteorologySt. Louis 9, Missouri Now Yo~rk University
Attn: J. Ii. Maceiwane, Si. (1) New York 53 . New YorkAttit: is. Hautrwits (1)
s Department of MeteorologyUniversity of Ca lifornia at Los Angeles M-issac'husetts institute of TecluiologyLus An,;eles, al i frorin Dopanrtm-'nt :)f l:eteurology
Attn:z M. heiburg'er (1) 77 Maassachu~setts AvenueS Deprtm.nt o Entaaeean;~Camnbridg~e 39. Miasrachiasetts
Deparment f Enineern;,,At t i: T. F. maltine (1)University of Calijornia at Los AngelesLos Anr.elr~s. Coilift'riii:t Rutagers University
At tan: L. M. K. Ho.-lter (1I) Coll*e,; uf AgricultureDepartment of Meteore'logy
Departme.Int of Neteorology New ilrunswiek, New Jersey (1)Floritli- State- Uniaversi tyTallathasuer. Florida National Advisory Con~mit Ler of Aeronautics
Att~i: W. A. &.um ()1500 New HEIMPShIre AvenuC, N.E11Washington 25, D.C. (2)
Woods Hole Ocetino~raphi- 3--stitutionWc.ý'Is 4cfl2. iss. 'Iioamrtn. ti, 1.. Wiather iwretau
Attn: C. Iselin (1) 24th & M Sts.. * fW.Washington 25. D.C.
T1he jol~ns hopkiins University Attn; Scientific Services Division (2)Derportirtent of Civil EniginrcrinigBaltimore. Marvryln'h Air Coordinating Cominittee
Attn: R. Long (1) Subcommrittee on Aviation Mete-orolovyR~oom 2D8Ilq-A. The P'ent~agon
The Jol~ns Hopkins Univerrsity Washincton. D.C. (1)IWI~ti ttment ot r. ~ihorewoud Campus
*LW.atimore, Manrya.ni; American Metrorcological Socie:tyAttn: G. Plamss (1) 3 joy Street
Boston R. h.asstichusottsNew Mexico Institute of Mining & Technology Attn: The Executive Secretary (1)Research and Deve~lopment DivisionSneorro. New Mexico Rese~arch Professor ot Aerological Engineering
Attn: E~. Work-ana (1) colle~ge of kan.gii.ýringDevartment a-! Fle tricati Engineering
Lnriversity of Ilhicuago University oh Flo~rida~Dllenrtment of Meteorology Gainesville. Florida (1)Chicago 37, Illinois
Attn: -H. Riehl (1) Directtor of Technical Servicesheanaqutirters. Dubway Proving Grounds
Woodls Hole Oceanog-a,Aaic Institutiona Iugw~ay. Utnh (1)Woodýs Hole. Mnss.&c1%u:;etts
Attn: A. Woodcock (1)