Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
KM-C850
discovera new level of cost-effective
colour copying and printing
for your office
pri
nt
cop
ysc
anfa
x
As colour continues to play an increasingly important part in business
communications, how do you make colour more widely available without
exposing yourself and your company to massively increased costs? Kyocera Mita’s
unique technology brings a new level of affordable colour copying and printing
to your office. And with single- and multifunction printing and copying devices,
there’s bound to be one that satisfies your organisation’s particular colour document
management needs.
With the KM-C850 you get A4 and A3 high-quality mono and colour. The intuitive
wide touch panel is easy to use, saving you time when copying, printing, scanning and
faxing your documents. All this, plus it will fit seamlessly onto your existing network.
• 31ppm mono and 8ppm colour (A4) digital copier
• 15ppm mono and 4ppm colour (A3)
• Universal cassettes support paper from A5 to A3
• Crisp 600dpi resolution
• 1,150 sheet input as standard from 3 sources, expandable
to 1,650 sheets from 5 sources
• Colour print, copy and scan plus mono faxing capabilities
from one device
• Professionally finished output from a full range of
departmental paper handling options
• Fast 400MHz PowerPC processor
• Generous 128MB RAM (expandable to 256MB plus a 10GB
hard disk option)
• Long-life drum guaranteed for 3 years*
* or 600,000 pages, whichever comes first
Bring affordable colour to your business
Until now, colour printing has been considered something
restricted for use only when producing important documentation
where the cost can be justified. But Kyocera Mita offers easy-to-
use full-colour systems that make colour output in offices more
affordable and accessible than ever before.
The revolutionary KM-C850 is a multifunctional product to give you
high quality, inexpensive colour for a wide variety of office
requirements. Thanks to Kyocera Mita’s long-life components, the
print cost for full colour, as well as black and white, is extremely low.
In fact, the KM-C850 will transform the way you work. Because
although it has highly advanced black and white functionalities,
it makes working in colour so easy and affordable that you may
never want to go back to black and white again!
”By communicating non-verbally, colour bypasses the intellect and
addresses our emotions directly. It can deliver a message that might
otherwise be overlooked or ignored”.
(Source: Pantone Colour Institute)
At presentational level, high-quality documents and publications printed in colour
communicate a strong, confident and professional image. And, as you drill down
into the detail, colour will draw attention to key information, aiding quick and
accurate understanding. In fact, studies have shown that when colour is used,
comprehension is improved by 75%, readership is increased by 40%, and learning
is accelerated by between 55% and 75%. As the use of colour printing in offices
becomes more widespread, colour documents will become indispensable.
Affordable colour
The use of colour
KM
-C8
50
N w
ith
DF
-35
, D
ocu
me
nt
fin
ish
er/
SR
DF
-2,
Do
cum
en
t p
roce
sso
r/P
F-3
5,
Pa
pe
r fe
ed
er
The KM-C850 is far more than just a copier. It is a highly advanced, modular system
with which you can copy, print, scan and fax. All functions integrate state-of-the-art
technology that delivers outstanding levels of productivity and flexibility. The variety of
features provided by the KM-C850 enable an extraordinary presentation level.
Multifunctional document management
All Kyocera Mita products are built with long-life components that reduce your replacement and
maintenance costs. You can save a lot of time and money by not having to change the toner so
often. The Kyocera Mita drum will keep going for up to 600,000 images as opposed to 100,000
images with most drums. In fact, the use of long-life components means that Kyocera Mita
products need servicing up to seven times less frequently than other products on the market.
Long-life components
The intuitive wide touch panel is easy to use and designed to save you both
time and hassle for copying, printing and scanning your documents.
Explanations of each function are displayed on the panel, reducing the need
to refer to the manual. The touch-panel can even be customised to adapt to
your precise needs. For instance, one-touch and short-cut keys can be
selected and displayed for frequently used functions – eliminating the need
to browse through extensive menus.
Wide touch panel
To avoid mixing print and copy output, you can direct the
copy output to the optional finisher and print output to the
internal output tray, or vice versa.
Output destination setting
A variety of functions such as proof and hold, private print and job storage are
available with the addition of a hard disk (HD-4), which are known as enhanced
Multiple Printing System (eMPS). These functions are instantly and easily accessible,
and they make printing or copying more flexible and convenient than ever.
• Quick Copy function, for printing a document stored on the hard disk;
• Proof & Hold function, enabling the first copy to be proofread before
printing multiple copies;
• Private Print, a PIN/password controlled print function for confidential or
private documents;
• Virtual Mailboxes, offering each member of your team a convenient,
personalised storage space where document data can be stored and
called up as needed.
Powerful job management functions
Toner consumption can be reduced by approximately 30% in both colour and
monochrome using this mode, ideal for printing drafts or producing trial copies to
ensure your toner lasts even longer.
Ecology mode
With the commitment to seamless connectivity, all Kyocera Mita
products use one common interface. These all in one KX Drivers are
extremely practical for IT managers, as there is significantly less
training and support required. The technologies support multiple
Kyocera Mita devices on any current Windows operating system, as
well as a wide variety of languages and single and double-byte font
driving for different symbols and characters. The new KX Drivers offer
operating consistency, as well as providing a single solution to
increasingly complex printing technologies. Not only IT managers
appreciate the benefits of KX Drivers. Everybody is able to use all the
functionalities of a visually guided graphical user interface.
KX Drivers
In addition to the common network interface cards, the KM-C850 also supports
a variety of additional network card functions such as Token Ring, Wireless and
Fibre Optic. The Internet Printing Protocol (IPP) enables you to send print jobs to
a remote printer in a different building or even a different country.
Added network functionality
Transform the KM-C850 into a colour network scanner with up to 15 ppm A4 in colour. Kyocera
Mita’s Document Flow System lets save your scanned documents directly to any folder in your
network, making the scanner function in the KM-C850 a powerful tool for secure, low-cost
archiving. The KM-C850 scan option also enables scan-to-PC, scan-to-e-mail or any TWAIN-
compatible device, using any of the standard imaging formats, including TIFF, PDF and JPEG.
Optional A3 colour scan function
Enrich every aspect of your business communications with the powerful
colour applications of the Kyocera Mita KM-C850 multifunctional
system. With 31 A4 pages per minute in black & white, and 8 A4 pages
per minute in colour, the KM-C850 is one of the most powerful copiers
and printers in its class. Add to this a first-page-output time of just 25
seconds for full colour, and the optional full-colour A3 scan and fax
function, and you can see why the KM-C850 presents such an attractive
alternative to conventional monochrome systems. From high-impact
presentations-material to high-volume documentation; the
KM-C850 is the flexible all-in-one solution for your office needs.
The new-generation A3 colour
multifunctional from Kyocera Mita
Your Kyocera Mita Business Partner:
Kyocera Mita does not warrant that any specifications mentioned will be error-free. Specifications are subject to changewithout notice. Information is correct at time of going to press. All other brand and product names may be registeredtrademarks or trademarks of their respective holders and are hereby acknowledged.09
/03-
01
Kyocera Mita (UK) Ltd, 8 Beacontree Plaza, Gillette Way, Reading RG2 0BSTel 0118 931 1500, Fax 0118 931 1108, email: [email protected], www.kyoceramita.co.uk
KM-C850Colour/MonochromeMultifunctionalThe KM-C850 incorporates extremely durable componentsthat guarantee smooth and reliable operation. The system isdesigned to last for extreme long hardware maintenancecycles. The drum is designed to last 600,000 images and thedeveloper unit 300,000 pages. Thus the KM-C850 keeps youroverall operating costs low and productivity high – at thesame time ensuring a minimum impact on the environment.
GENERAL
Technology: Kyocera Mita Colour laserEngine speed: Max. 31/15 Pages A4/A3 per minute b/w,Max. 8/4 pages A4/A3 per minute colourResolution: 600 x 600 dpi, 256 greyscale (scan/copy)600 x 600 dpi, 2400 x 600 with KIR2, 2/4 bit/dot (print)Time to first copy: 11 seconds or less in b/w, 25 seconds orless in colourWarm-up time: 180 seconds or lessDuty cycle: 100,000 pages per month b/w, 25,000 pagesper month colourPower source: AC 220 ~ 240 V, 50/60 HzNoise: Copying/Printing 60 dB(A), Standby 43 dB(A)Dimensions (W x D x H) (incl. PF-35 or PD-800): 590 x 585 x 870 mm Weight (incl. PF-35): Approx. 115 kgCertification: GS/TÜV/CE This product is produced according the quality norm ISO 9001 and the environmental guidelines ISO 14001
PAPER HANDLING
All mentioned paper capacities are based on a paperthickness of max. 0,11 mm. Please use paper recommendedby Kyocera Mita under normal environmental condition.
Input capacity (incl. PF-30A): 500-sheet x 2 universal cassette, 64-90 g/m2, A5R, A4, A3, Folio 150-sheet multi-purpose tray, 64-220 g/m2, A6R-A3,Folio, Envelopes 250-sheet x 2 optional cassette, 64-90 g/m2, A5R, A4, A3, FolioMax. capacity 1,650 sheetsOutput capacity: 500-sheet inner tray,150-sheet side eject
COPY FUNCTIONS
Max. original size: A3Continuous copy: 1 - 999 Memory capacity: Standard 256 MB, Max. 256 MB + 10 GBHDD (MB-7A)Zoom: 25 % - 400 % in 1% steps, XY Zoom, 5R/5EExposure modes: Mixed, Text, Print, Photo, Map, ECO modeImage adjustments: Quick image, Colour balance, Hue,Sharpness, Low or high gloss mode, Colour calibration Features: Auto colour selection, Auto drawer switching,Auto paper selection, Auto magnification selection, Autoexposure selection, Duplex*1, Section management (500sections), Scan once copy many, Rotate copy, Electric sort,Rotate sort, Mono colourcopy, Booklet copy*1, Booklet tobooklet*1,N-up copy, Page numbering, Cover, Insert, Chapter,OHP mode, Thick paper mode, Margin, Border erase, Invert,Mirror, Page separation, Filing*2, Poster, Delivery copy*1 Requires optional PD-800 *2 Requires optional SRDF-2
PRESCRIBE IIe/IIc
With the Kyocera Mita page design and control languagePRESCRIBE IIe/IIc, even complex graphics, logos and forms(even multipart forms) can be created independently of thesystem and saved and updated in the print controller. Con-sequently, integration into print files no longer applies.They are only accessed as required and therefore relieve theload on the network.
Typefaces and barcodes
The 136 scalable PostScript fonts provide high flexibilityfor all applications. A total of 45 integrated barcodes arecomputed automatically by the printer and printed in thedesired size, alignment and position.
INTERFACES
Standard interface: High speed bi-directional parallel (IEEE1284), USB (version 2.0), Fast Ethernet 10/100Base-TX, KUIO-LV slot for optional 2nd parallel interface or RS-232C serialinterface or network interface card. Multiple Interface Connection (MIC): MIC allows forsimultaneous data transfer via up to four interfaces, witheach interface having its own virtual printer. PRINTFUNCTIONS (OPTIONAL)PRINT FUNCTIONS (OPTIONAL)
Processor: PowerPC 750CX / 400 MHzMemory: Standard 128 MB + ECOmemory, max. 640 MB, 2 additional DIMM slots (32, 64,128, 256 MB)Emulations: PCL6, PCL5c incl. PJL, KPDL3 (PostScript3 compatible), KC-GL (HP-GL 7550A), PDF direct printController language: PRESCRIBE IIcFonts: 80 outline fonts (PCL), 1 Bitmap font, 136 outlinefonts (KPDL3), 45 types of one-dimensional and 1 type oftwo-dimensional barcodes (PDF-417)Features: eMPS - for quick copy, proof and hold, private print,storage and Job management functionality with hard disk(HD-4)
SCAN FUNCTIONS (OPTIONAL)
Functionality: Scan-to-PC, scan-to-mail, network TWAINScan speed: 31 originals per minute (600 dpi/A4) b/w,15 originals per minute (600 dpi/A4) colourOriginal type: Text, photo, text + photo, OCRMax. scan size: A3Resolution: 600, 400, 300, 200 dpi (256 greyscales)Applicable PC: IBM PC/AT compatibleApplicable OS: Windows 95, 98, Me, NT4.0, 2000, XPInterface: 10/100Base-TX Compression method: G4 (MMR), colour: JPEG (compressionratio selectable)Image format: TIFF, PDF, JPEGNetwork protocol: TCP/IPBundled software: DB-Assistant, Scanner file utility, Addressbook, Address editor, TWAIN Source, PaperPort 8.0
FAX FUNCTIONS (OPTIONAL)
Compatibilty: ITU-T Super G3Modem speed: Max. 33.6 kbpsTransmission speed: 3 seconds or less (JBIG)Scanning speed: 1 secondScanning density: Normal: 8 dot/mm x 3.85 line/mm, Fine: 8 dot/mm x 7.7 line/mm, Superfine: 8 dot/mm x 15.4line/mm, Ultrafine:16 dot/mm x 15.4 line/mm (with optionalmemory), halftoneMax. original size: A3Compression method: JBIG, MMR, MR, MHMemory: Standard 4 MB Bitmap (Max. 8 MB), Standard 4 MBImage (Max. 8 MB)Features: Network faxing*3, Rotate transmission, Duplex fax reception*4, Confidential, Relay and bulletin boardtransmission and reception, N-up reception, Mailbox,Remote diagnostics *3 Requires optional Scan system (G)*4 Requires optional PD-800Features: Network faxing*3, Rotate transmission, Duplex fax reception*4, Confidential, Relay and bulletin boardtransmission and reception, N-up reception, Mailbox,Remote diagnostics *3 Requires optional Scan system (G)*4 Requires optional PD-800
OPTIONS
Platen cover (B), Scan system (C), Fax system (G)
Paper handlingSRDF-2 Document processor: Reversing documentprocessor, 100-sheet, 35-160 g/m2, A5R-A3, Folio (ADF), 100-sheet, 50-120 g/m2, A5R-A3, Folio (RADF)PD-800 Duplex unit: Duplex+500-sheet universal cassette,64-90 g/m2, A5R, A4, A3, FolioPF-35 Paper feeder: 250-sheet x 2, 64-90 g/m2, A5R-A 3DF-35 Document finisher: 3,000-sheet, 60-200 g/m2, A6R-A 3, Folio, 2/4 hole punch, staple (50-sheet b/w, 30-sheetcolour), 3 modes
MemoryPrinter memory: 2 slots, (32, 64, 128, 256 MB DIMM)CompactFlash® card: 1 slot, (8, 16, 32, 64 MB) forms, fonts,logos, macro storageHD-4 Hard disk: 10 GB, storage of data, forms, fonts, etc. +eMPSCabinet: Desk with storage capacity
OPTIONAL INTERFACES
Internal multi-protocol network interfaces for use with printand print/scan systemsIB-21e: 10/100BaseTX Ethernet interfaceSB-60: 4/16Mbit Token ring (STP/UTP) interfaceSB-110FX: 100BaseFX Fibre Optic interfaceSB-50: 10BaseFL Fibre Optic interfaceHB-7/110: 10/100BaseTX Ethernet interface (includes DEC-LATprotocol)
CompactFlash® card
The optional CompactFlash® card offers abundant storagespace for typefaces, logos, standard forms and signatures aswell as individual API or PRESCRIBE macros.
Hard disk
The hard disk (HD-4) offers even more efficient documentmanagement. At the same time it enables the managementof print data with eMPS functions such as quick copy, proofand hold, private print and job storage.
KM-NET Viewer
KM-NET Viewer is an advanced network managementsoftware tool that is compatible with all Kyocera Mitaprinters and multifunctional products as well as those ofother vendors by using the standardized protocol SNMP. Thesettings of all print devices on the network can be checkedvisually and amended from any Windows PC. KM-NET Vieweralso acts as a valuable, real-time early warning system bysending eMail-Messages to users/administrators.