New Filton Product Catalogue

PRODUCT CATALOGUE

1. Technical information

Filton ABBox 63268 21 SvalövTel: 0418-44 65 80Fax: 0418-66 33 70 [email protected]

www.filton.se

2. Filter media DinTex, DinGlas

3. Compact filters DinGlas Panel, Z-Pleat, DinPleat

4. HEPA/ULPA filters DinCell

9. Bag filters MaxFlo, GreenFlo, DinPak

11. Domestic ventilation

7. Dust separators DinCart

5. Metal filters DinMet

6. Carbon filters DinCarb

8. Filter boxes/Frames DinBox

10. Surface treatment

12. Other

Our productsRough filtersCompact filtersBag filtersHEPA/ULPA filtersMetal filtersCarbon filtersMicro-filtersDust separatorsFine filters

P-labelling guarantees the quality and function

Our bag filters in the filter classes F5, F6, F7 and F8 are P-labelled according to the certification rules for air filters SPCR 022. This is a guarantee from a neutral body that the filter fulfils the requirements set for quality and function. SP Technical Research Institute of Sweden continually monitors the design, production and testing of P labelled filters.

Included in the requirements is a six-month long test, where among other things the separation grade is checked, so the products correspond to established standards.

The right air quality in the local environ-ment The air quality in technical manufactur-ing processes often affects the quality of the end product. Filton's challenge is the right air quality in the local environment.Our task is to find a solution for the filtration needs, where extra stringent technical requirements are set. Filton AB is a company in the Dinair Group AB, and we have our own manufacturing units in Sweden, Latvia and China.

Quality and environment

Quality and environment are terms that in many respects belong together. Therefore, it has been natural for Filton and the Dinair Group to raise the prod-ucts' value and quality by quality and environmental certification according to ISO 9001 and ISO 14001.

Our operations are inspected and certified by SP Technical Research Institute of Sweden, which also stands for the day-to-day checks.

0,001 0,01 0,1 1 10 100 1000 µm

VirusBacteria

PollenAsbestosPlant spores

Dust harmful to the lungs Dust, mites

Fly-ash

Casting dust

Cement dust

Oil fumes

Tobacco

Coal dust

Sand

Hair Ø

Visible to the eyeMicro-filters

Fine filters

Rough filters

Particle size

The table shows the approximate parti-cle size of several commonly occurring particles as well as the type of filter that is needed for their removal.

Characteristics Average Average separation separation efficiency efficiency at particle size 0.4 µm A

m% E

m%

Filter groups Filter classes Class limits

Rough G1 Am

< 65(G)* G2 65< A

m< 80

G3 80< Am

< 90 G4 90< A

m

Fine F5 40< Em

< 60(F)** F6 60< E

m < 80

F7 80< Em

< 90 F8 90< E

m < 95

F9 95< Em

Classification of ventilation filters in accordance with EN 779:2002

*) Rough filters are tested up to 250 Pa final pressure drop.

**) Fine filters are tested up to 450 Pa final pressure drop.

0,3 0,4 0,6 0,8 1 2 3 4 6 8 10

Particle size µm

Separation efficiency/Particle sizefor different filter classes

100

90

80

70

60

50

40

30

20

10

0

A

C

D

E

F

Star

t effi

cien

cy %

Fine filter F9

Fine filter F8

Fine filter F7

Fine filter F6

Rough filter G4

Rough filter G3

A

B

C

D

E

F

B

Particle size Average size Filter class Filter class Range µm µm Requirement for Requirement for 80% efficiency 99% efficiency

10 - 30 20 G3 F5

5 - 10 7,5 G3 F5

3 - 5 4 F5 F7

1 - 3 2 F7 F9

0,5 -1 0,75 F8 H10

< 0,5 0,25 H10 > H10

Filter class versus particle size

The necessary filter class to achieve 80% and 99% filtration efficiency respectively

Filter class Total efficiency Local values

H10 > 85 –

H11 > 95 –

H12 > 99.5 97,5

H13 > 99.95 99.75

H14 > 99.995 99.975

U15 > 99.9995 99.9975

U16 > 99.99995 99.99975

U17 > 99.999995 99.9999

Efficiency (%) at MPPS EN1822

Classification is based on the total efficiency and leakage.

Leakage = 5 times higher value than the total penetration, exception for class U17.

MPPS = Most Penetration Particle Size

DinTex is a series of synthetic filter mate-rials that are tested and optimised for air filtration.

There are many and versatile applications. The synthetic material consists of polymer fibres that, thanks to an exclusive mixing and binding technology, give a material with a large number of fibres per square metre. The material is self-extinguishing and all the versions are fire certified.

DinTex is characterised by a very low pres-sure drop in relation to the air quantity as well as good dust capture properties.

DinTex can be supplied cut to specialdimensions on request.

Filter media on a roll Synthetic

Technical data G2 G3 G4 F5

Recommended air velocity (m/s) 1.5 1.5 1.5 0.25Nominal air quantity m3/hr/m2 5400 5400 5400 900Start pressure drop Pa 20 35 42 15Recommended final pressure drop Pa 200 200 200 250Average separation efficiency % 78 86 91 95Filter class NS EN 779 G2 G3 G4 F5Fire certification DIN 53438 F1 F1 F1 F1Max Operating Temperature °C 100 100 100 100Form, roll m 1 x 40/2 x 40 1 x 20/2 x 20 1 x 20/2 x 20 1 x 20/2 x 20

DinTex

DinGlas is a progressively formed glass fibre media for separating particles in air inlet units. It can also be used as an ex-tract air filter in surface treatment facilities where the pigment is dry.

DinGlas is an elastic media with a high bearing capacity for coping with high dust concentrations and air quantities. It is thoroughly treated with an odourless adhesive.These factors contribute to DinGlas' high dust holding capacity.

DinGlas is available in two thicknesses, 64 mm and 102 mm, however, it can be deliv-ered cut to special dimensions on request.

Glass fibre media on a roll Yellow & Blue

Air quantity m3/h

DinGlas

Technical data DinGlas Yellow DinGlas Blue

Thickness mm 64 102Filter class EN779 G3 G4Initial pressure drop Pa at 5400 m3/hr • 7200 m3/hr • 9000 m3/hr 25 • 30 • 40 45 • 85 • 140 Recommended final pressure drop Pa 200 250Fire certification DIN 53438 F1 F1

Standard dimensions m DinGlas Yellow DinGlas Blue

0.5 x 20 0.5 x 20 0.6 x 20 0.6 x 20 0.75 x 20 – 1.0 x 20 1.0 x 20 1.5 x 20 1.5 x 20

DinGlas Green is a progressively formed glass fibre media for separating pigment particles in surface treatment facilities.

DinGlas Green is a dry media and it is used with advantage for industrial painting, car spraying, painting of woodwork and Tec-tyl treatment.

Glass fibre media on a roll Dry pigment capture

DinGlas Green

Technical data DinGlas Green

Thickness mm 75 and 100Separation efficiency for synthetic resin varnish % 93-97Initial pressure drop Pa at 2500-6300 m3/hr/m2, 0.7-1.75 m/s 7-40 Recommended final pressure drop Pa 100-120Dust holding at 80 Pa and 0.7 m/s, kg/m2 3.5-4.7Fire certification DIN 53438 F1

Standard dimensions m

1.5 x 20 0.75 x 20 0.9 x 20 1.0 x 20 1.5 x 20 2 x 20 Pads 500 x 500

DinGlas Panel consists of a progressively formed, oiled, glass fibre material. It is used as a pre-filter to remove the coarsest particles. It can also be supplied with DinGlas Green.

DinGlas Panel is available in many sizes, up to 1000 x 690 x 94 mm. DinGlas Panel can also be mounted in a plastic or plate frame.

Media Glass fibre G3Start pressure drop D=24/45 Pa, D=47/50 Pa, D=94/60 PaSeparators —Frame Moisture resistant cardboard frame with cardboard grilleRec. final pressure drop 200 PaMax temperature 70° C

Filter class G3 Frame type solid cardboard

20 40 60 80 100 120 140 160 1800

20

40

60

80

100

120

Pres

sure

dro

p P

a

% of nominal air quantity

D=47D=24

Name B H D Area m2 Nom. air quantity Pressure drop Pa

DinGlas Panel G3 595 290 24/47/94 0.17 1200 45/50/60

DinGlas Panel G3 595 595 24/47/94 0.35 2400 45/50/60

DinGlas Panel G3 494 494 24/47/94 0.24 1800 45/50/60

DinGlas Panel G3 494 392 24/47/94 0.19 1400 45/50/60

DinGlas Panel G3 621 392 24/47/94 0.24 1800 45/50/60

DinGlas Panel G3 621 494 24/47/94 0.31 2100 45/50/60

DinGlas Panel G3 610 305 24/47/94 0.19 1400 45/50/60

DinGlas Panel G3 610 610 24/47/94 0.37 2500 45/50/60

Standard dimensions

DinGlas Panel

Ordering example DinGlas G3 595 x 290 x 24

D

B

H

D=94

Z-pleat is an expanded surface filter, which consists of a pleated polyester mat glued into a cardboard frame and grille. The filter is most suited to air treat-ment units, where the installation dimension is re-stricted, as well as for upgrading the filter quality in older units.The filter is available in many sizes, up to 1000 x 690 x 94 mm.

Z-pleat can also be mounted in a plastic or plate frame, as standard it does not contain any metal parts and thus, it can be incinerated.

Media Glass fibre G4Start pressure drop G4= 70 Pa, F5= 85 PaSeparators —Frame Moisture resistant cardboard frame with cardboard grilleRec. final pressure drop 200 PaMax temperature 70° C

Filter class G4-F5 Depth 24 Frame type solid cardboard

Name B H D Area m2 Nom. air quantity m3/hr

Z-pleat G4 595 290 24 0.3 700

Z-pleat G4 595 595 24 0.7 1500

Z-pleat G4 494 494 24 0.5 1100

Z-pleat G4 494 392 24 0.4 800

Z-pleat G4 621 392 24 0.5 1100

Z-pleat G4 621 494 24 0.6 1500

Z-pleat G4 610 305 24 0.4 800

Z-pleat G4 610 610 24 0.8 1600

Standard dimensions

Z-pleat

Ordering example Z-pleat G4 595 x 290 x 24

DB

H

20 40 60 80 100 120 140 160 1800

20

40

60

80

100

120

140

Pres

sure

dro

p P

a


G4



Z-pleat G4 595 290 47 0.7 1500

Z-pleat G4 595 595 47 1.4 3200

Z-pleat G4 494 494 47 0.9 2200

Z-pleat G4 494 392 47 0.7 1600

Z-pleat G4 621 392 47 0.9 2200

Z-pleat G4 621 494 47 1.2 3000

Z-pleat G4 610 305 47 0.7 1600

Z-pleat G4 610 610 47 1.5 3400

Standard dimensions

Z-pleat

DB

H

20 40 60 80 100 120 140 160 1800

20

40

60

80

100

120

140

Pres

sure

dro

p P

a






G4



Z-pleat G4 595 290 94 1.4 2000

Z-pleat G4 595 595 94 2.8 3900

Z-pleat G4 494 494 94 2 2800

Z-pleat G4 494 392 94 1.5 2100

Z-pleat G4 621 392 94 2 2800

Z-pleat G4 621 494 94 2.5 3500

Z-pleat G4 610 305 94 1.5 2100

Z-pleat G4 610 610 94 3 4200

Standard dimensions

Z-pleat

DB

H

20 40 60 80 100 120 140 160 1800

20

40

60

80

100

120

140

Pres

sure

dro

p P

a






G4

DinPleat/ DinCell

Example of filter combination: DinPleat GHC.

Designation 1: G = ( Media ), Glass fibreDesignation 2: H = ( Separator ), Hot-melt adhesiveDesignation 3: C = ( Frame ), Cardboard U-profile

DinPleat/DinCell depth and dimension versions

DinPleat/DinCell can be manufactured with a pleat depth from 15 to 250 mm and with frame dimensions from 100 x 100 x 20 to 1220 x 610 x 292 mm.

DinPleat HT, (High Temperature) is manufactured with depths from 150 to 292 mm and with frame dimensions from 287 x 287 to 610 x 610 mm as standard but it can be manufactured in all sizes up to 610 x 1220 x 292 mm.

DestructionDinPleat GHC (cardboard frame), GHP (plastic frame) and DinPleat V can be completely inciner-ated.

DinCell GHA can be manufactured in 66 and 90 mm extruded aluminium frames and can be sup-plied in sizes from 140 x 250 to 610 x 1220 mm, however, special sizes can be manufactured.

All DinCell filters can be tested according to EN 1822.From filter class H14, all the filters are tested.

Temperature resistanceFilters with hot-melt adhesive separator, up to 70°CFilters with aluminium separator, up to 400°C

Key of terms for Media - Separator - Frame

DinPleat, DinCell

Media Des. 1 Separator Des. 2 Frame Des. 3

Glass fibre G Hot-melt adhesive H Cardboard U-profile C

Sewn glass N Aluminium A Cardboard grille N

Polyester P Steel net S Plastic U-profile P

Meltblown M Cardboard P Plastic with header H

Pleated carbon C None N Plastic V arranged with header Z

Nano fibre A MDF M

Bag filter with glass fibre J Galvanised plate G

Carbon pellets 4 mm K Galvanised with header K

Imp. carbon pellets R Aluminium extruded A

Aluminium plate L

Polyester sides S

No frame B

Stainless plate frame R

Media Glass fibreInitial pressure drop at nom. flow F6/80, F7/100, F8/120 PaSeparators ThermoplasticRec. final pressure drop 400 PaMax temperature 70° CSeal Can be provided with a sealing strip on one or both sides.

DinPleat type GH_ is a closely pleated fine filter in glass fibre material with separators of hot-melt adhesive.The very large filter area provides a low initial pressure drop and a long service life. DinPleat in mainly used in heat exchanger, air purifiers, cab ventilation or as a prefilter for HEPA filters. Din-Pleat can be provided with lacquered protective grilles on one or both of the sides.

For the choice of frame type, see the key of terms.

Filter class F5-F8 Frame type C, P, G, R, M

DinPleat GH_

DB

H

20 40 60 80 100 120 140 160 180

F6F7F8

0

50

100

150

200

Pres

sure

dro

p P

a



DinPleat GH_ 305 305 48 1.8 550

DinPleat GH_ 610 305 48 3.7 1100

DinPleat GH_ 610 610 48 7.5 2200

DinPleat GH_ 305 305 96 2.8 850

DinPleat GH_ 610 305 96 5.5 1600

DinPleat GH_ 610 610 96 11 3300

Standard dimensions

Ordering example DinPleat GH_ F5 305 x 305 x 48

DinPleat GH_

Filter class F5-F8 Frame type G, R, M

DinPleat GH_

20 40 60 80 100 120 140 160 180

F6F7F8

0

50

100

150

200

Pres

sure

dro

p P

a



DinPleat GH_ 305 305 150 3.7 850

DinPleat GH_ 610 305 150 7.5 1650

DinPleat GH_ 610 610 150 15 3300

DinPleat GH_ 305 305 292 6.3 1400

DinPleat GH_ 610 305 292 12.5 2800

DinPleat GH_ 610 610 292 25 5500

Standard dimensions

Ordering example DinPleat GH_ F5 305 x 305 x 150

DinPleat GH_

Media Glass fibreInitial pressure drop at nom. flow F6/80, F7/100, F8/120 PaSeparators ThermoplasticRec. final pressure drop 400 PaMax temperature 70° CSeal Can be provided with a sealing strip on one or both sides.

DinPleat type GH_ is a closely pleated fine filter in glass fibre material with separators of hot-melt adhesive.The very large filter area provides a low initial pressure drop and a long service life. DinPleat is used mainly in heat exchanger, air purifiers or as a prefilter for HEPA filters. DinPleat can be pro-vided with lacquered protective grilles on one or both of the sides.

For the choice of frame type, see the key of terms.

DB

H

Media Glass fibreInitial pressure drop F6/80 F7/100 F8/120Separators Corrugated cardboardRec. Final pressure drop: 400 PaMax temperature: 100° C

DinPleat GPM is a pleated fine filter in glass fibre ma-terial with separators of corrugated cardboard, the filters is good for temperatures up to 100 degrees.

The frame is manufactured from MDF. A large filter area gives a low initial pressure drop and a long serv-ice life. The filter does not contain any metal parts and can be completely incinerated.

DinPleat GPM is used in air purifiers and ventilation systems when the air is too warm for adhesive separa-tors but the filter is not directly exposed to moisture. The filter can also be manufactured in other filter classes.

Filter class F6-F8 Frame type M

DinPleat GPM

20 40 60 80 100 120 140 160 180

F6F7F8

0

50

100

150

200

Pres

sure

dro

p P

a



DinPleat GPM 305 305 150 3 900

DinPleat GPM 610 305 150 6 1800

DinPleat GPM 610 610 150 12 3400

DinPleat GPM 305 305 292 6 1400

DinPleat GPM 610 305 292 12 2700

DinPleat GPM 610 610 292 24 4800

Standard dimensions

Ordering example DinPleat GPM F6 305 x 305 x 150

DinPleat GPM

DB

H

Media Glass fibreInitial pressure drop at nom. flow F6/80, F7/100, F8/110 PaSeparators ThermoplasticRec. final pressure drop 400 PaMax temperature 70° C

DinPleat GHK is a closely pleated fine filter in glass fibre material with separators of hot-melt adhesive. DinPleat GHK has a 25 mm enclosure frame and is mounted in the same way as bag filters. The very large filter area provides a low initial pressure drop and long service life. It is used mainly in heat ex-changer, air purifiers but also as a prefilter for HEPA filters.

DinPleat can be provided with lacquered protective grilles on one or both of the sides.

DinPleat GHK can also be manufactured in other fil-ter classes.

Filter class F6-F8 Frame type K, 25 mm header

DinPleat GHK


DinPleat GHK 287 287 150 2 600

DinPleat GHK 494 494 150 6.5 1900

DinPleat GHK 287 592 150 5 1600

DinPleat GHK 592 592 150 10 3200

DinPleat GHK 287 287 292 4 1000

DinPleat GHK 494 494 292 13 3100

DinPleat GHK 287 592 292 9 2100

DinPleat GHK 592 592 292 19 4500

Standard dimensions

Ordering example DinPleat GHK F6 287 x 287 x 150

20 40 60 80 100 120 140 160 180

F6F7F8

0

50

100

150

200

Pres

sure

dro

p P

a


DinPleat GHK

D

B

H

25

DinPleat KGA HT is a high temperature filter with glass fibre material and separators of corrugated aluminium. DinPleat KGA HT has a 25 mm enclosure frame and is mounted in the same way as bag filters. The large filter area provides a low initial pressure drop and long service life. It is primarily used in lac-quer ovens and similar applications with high tem-peratures. It can be provided with protective grilles on one or both sides. Frame type galvanised steel plate, but it can be delivered in stainless steel plate.

DinPleat KGA HT can also be manufactured in other filter classes.

Filter class F6-F8 High temp filter Frame type K, 25 mm header

DinPleat GAK HT

20 40 60 80 100 120 140 160 180

F6F7F8

020406080

100120140160180200

Pres

sure

dro

p P

a



DinPleat GAK HT 287 287 150 2 600

DinPleat GAK HT 494 494 150 6 1800

DinPleat GAK HT 287 592 150 4 120

DinPleat GAK HT 592 592 150 8 2400

DinPleat GAK HT 287 287 292 4 1000

DinPleat GAK HT 494 494 292 12 2900

DinPleat GAK HT 287 592 292 8 1900

DinPleat GAK HT 592 592 292 16 3800

Standard dimensions

Ordering example DinPleat GAK HT F6 305 x 305 x 150

Media Glass fibreInitial pressure drop at nom. flow F6/80, F7/100, F8/110 PaSeparators AluminiumRec. final pressure drop 400 PaMax temperature 400° C

DinPleat GAK HT

D

B

H

25

Filter class F6-F8 High temp filter Frame type G, R

DinPleat HT

% of nominal flow


DinPleat GAG HT 305 305 150 3 600

DinPleat GAG HT 494 494 150 7 1900

DinPleat GAG HT 305 610 150 5 1600

DinPleat GAG HT 610 610 150 11 3200

DinPleat GAG HT 305 305 292 5 1000

DinPleat GAG HT 494 494 292 16 2400

DinPleat GAG HT 287 610 292 11 2000

DinPleat GAG HT 610 610 292 22 4000

Standard dimensions

Ordering example DinPleat GAG HT F6 305 x 305 x 150

20 40 60 80 100 120 140 160 180

F6F7F8

020406080

100120140160180200

Pres

sure

dro

p P

a

DinPleat GAG HT

Media Glass fibreInitial pressure drop at nom. flow F6/80, F7/100, F8/120 PaSeparators AluminiumRec. final pressure drop 400 PaMax temperature 400° C

DinPleat GAG HT is a high temperature filter with glass fibre material and separators of corrugated aluminium. The large filter area provides a low ini-tial pressure drop and a long service life. It is prima-rily used in lacquer ovens and similar applications with high temperatures. DinPleat GAG HT is pro-vided with protective grilles on one or both of the sides. Frame type galvanised steel plate, but it can be delivered in stainless steel plate.

DinPleat GAG HT is also available in other filter classes.

DB

H

DinPleat V is a closely pleated fine filter with ver-tical glass fibre banks and separators of hot-melt adhesive. DinPleat V has a 25 mm enclosure frame and is mounted in the same way as bag filters. The very large filter area provides a low initial pressure drop and long service life.

DinPleat V is a very stable filter with a short con-struction depth and it is primarily used for ventila-tion with turbulent airflows and with very moist air. It can be provided with a protective grille on the clean air side.

Filter class F6-F9 Frame type Plastic, 25 mm header

DinPleat V

20 40 60 80 100 120 140 160 180

F6

F7F8F9

0

50

100

150

200

250

300

Pres

sure

dro

p P

a


Name B H D Area m2 Air quantity m3/hr / Pressure drop Pa

DinPleat V F6 and F7 respectively 592 287 292 9 2100 / 100 and 130






Standard dimensions

Ordering example DinPleat V F6 592 x 287 x 292

Media Glass fibre F6-F9Separators ThermoplasticRec. final pressure drop 400 PaMax temperature 70° C

DB

H

25

Filter class H12-H14 Frame type M, G, R

DinCell GA_

Name B H D Area m2 Nom. flow m3/hr

DinCell GA_ 305 305 150 2,5 320

DinCell GA_ 610 305 150 5 650

DinCell GA_ 610 610 150 11 1450

DinCell GA_ 762 610 150 14 1800

DinCell GA_ 1220 610 150 22 2900

DinCell GA_ 305 305 292 6 600

DinCell GA_ 610 305 292 12 1250

DinCell GA_ 610 610 292 25 2750

DinCell GA_ 762 610 292 32 3500

DinCell GA_ 1220 610 292 50 5500

Standard dimensions

Ordering example DinCell GA_ H12 305 x 305 x 150

Pres

sure

dro

p P

a


20 40 60 80 100 120 140 160 180

H12H13H14

0

100

200

300

400

500DinCell GA_

DinCell GA_ is a pleated HEPA filter with a very high separa-tion efficiency. The filter material is glass fibre with aluminium separators. The large filter area provides a low initial pressure drop and long service life. DinCell GA_ is used primarily in clean rooms for hospitals, the electronics and pharmaceuti-cal industries but also as a final filter in industry as well as for ventilation where there are particles injurious to health in the air.

Frame type MDF (M), galvanised steel plate (G) or stainless steel (R). The filter can be provided with protective grilles on one or both of the sides. Can also be supplied in class H10 and H11.

Media Glass fibreInitial pressure drop at nom. flow H12/230, H13/250, H14/270 PaSeparators AluminiumFinal pressure drop 500 PaMax temperature 120° CSeal Skimmed polyurethane or foam rubber

D

B

H

DinCell is a tightly pleated HEPA filter with a very high separation efficiency. The very large filter area provides a low initial pressure drop and long serv-ice life. DinCell is used primarily in clean rooms for hospi-tals, the electronics and pharmaceutical industries but also as a final filter in industry as well as for ventilation where there are particles injurious to health in the air. Frame type MDF (M), galvanised steel plate (G) or stainless steel (R). The frame is available in depths 24-292 mm.The filter can be provided with protective grilles on one or both of the sides. Can be supplied in class H10 and H11.Media Glass fibreInitial pressure drop at nom. flow H12/230, H13/250, H14/270 PaSeparators ThermoplasticRec. final pressure drop 600 PaMax temperature 70° CSeal Skimmed polyurethane or foam rubber

Filter class H12-H14 D 78 mm Frame type M, G, RPr

essu

re d

rop

Pa


20 40 60 80 100 120 140 160 180

H12H13H14

0

100

200

300

400

500

DinCell GH_

Name B H D Area m2 Nom. flow m3/hr

DinCell GH_ 305 305 78 2 250

DinCell GH_ 610 305 78 4,5 550

DinCell GH_ 610 610 78 9 1250

DinCell GH_ 762 610 78 11 1400

DinCell GH_ 1220 610 78 18 2500

Standard dimensions

Ordering example DinCell GH_ H12 305 x 305 x 78

DB

H

DinCell GHM

DinCell is a tightly pleated HEPA filter with a very high separation efficiency. The very large filter area provides a low initial pressure drop and long service life. DinCell is used primarily in clean rooms for hos-pitals, the electronics and pharmaceutical indus-tries but also as a final filter in industry as well as for ventilation where there are particles injurious to health in the air. Frame type MDF (M), galva-nised steel plate (G) or stainless steel (R). The frame is available in depths 24-292 mm.The filter can be provided with protective grilles on one or both of the sides. Can be supplied in class H10 and H11.Media Glass fibreInitial pressure drop at nom. flow H12/230, H13/250, H14/270 PaSeparators ThermoplasticRec. final pressure drop 600 PaMax temperature 70° CSeal Skimmed polyurethane or foam rubber

Filter class H12-H14 D 150 mm Frame type M, G, R

DinCell GH_

DB

H

Name B H D Area m2 Nominal flow m3/hr

DinCell GH_ 305 305 150 4 450

DinCell GH_ 610 305 150 7,5 1000

DinCell GH_ 610 610 150 15 1600

DinCell GH_ 762 610 150 19 1900

DinCell GH_ 1220 610 150 30 3200

Standard dimensions

Pres

sure

dro

p P

a


20 40 60 80 100 120 140 160 180

H12H13H14

0

100

200

300

400

500DinCell GHM


DinCell is a tightly pleated HEPA filter with a very high separation efficiency. The very large filter area provides a low initial pressure drop and long service life. DinCell is used primarily in clean rooms for hos-pitals, the electronics and pharmaceutical indus-tries but also as a final filter in industry as well as for ventilation where there are particles injurious to health in the air. Frame type MDF (M), galva-nised steel plate (G) or stainless steel (R). The frame is available in depths 24-292 mm.The filter can be provided with protective grilles on one or both of the sides. Can be supplied in class H10 and H11.Media Glass fibreInitial pressure drop at nom. flow H12/230, H13/250, H14/270 PaSeparators ThermoplasticRec. final pressure drop 600 PaMax temperature 70° CSeal Skimmed polyurethane or foam rubber

Filter class H12-H14 D 292 mm Frame type M, G, R

DinCell GH_

DB

H


DinCell GH_ 305 305 292 6 600

DinCell GH_ 610 305 292 12 1300

DinCell GH_ 610 610 292 25 2600

DinCell GH_ 762 610 292 32 3200

DinCell GH_ 1220 610 292 50 5000

Standard dimensions


Pres

sure

dro

p P

a


20 40 60 80 100 120 140 160 180

H12H13H14

0

100

200

300

400

500DinCell GHM

DinCell is a tightly pleated HEPA filter with a very high separation efficiency. The very large filter area provides a low initial pressure drop and long serv-ice life. DinCell is used primarily in clean rooms for hospi-tals and the electronics and pharmaceutical indus-tries. The frame is in extruded aluminium and the filter has powder coated protective grilles on both sides of the filter packet. Can be supplied in class U15.

Media Glass fibreInitial pressure drop at nom. flow H12/140, H13/160, H14/180 PaSeparators ThermoplasticRec. final pressure drop 600 PaMax temperature 70° CSeal Skimmed polyurethane or foam rubber

Filter class H12-H14 Frame type extruded aluminiumPr

essu

re d

rop

Pa


20 40 60 80 100 120 140 160 180

H12H13H14

0

50

100

150

200

250

300

350

DinCell GHA

D

B

H


DinCell GHA 305 305 66 2,7 150

DinCell GHA 610 305 66 5,5 300

DinCell GHA 610 610 66 11 600

DinCell GHA 762 610 66 13 750

DinCell GHA 1220 610 66 22 1200

DinCell GHA 305 305 90 4 200

DinCell GHA 610 305 90 8 400

DinCell GHA 610 610 90 16 800

DinCell GHA 762 610 90 20 1000

DinCell GHA 1220 610 90 32 1600

Standard dimensions

Ordering example DinCell GHA H12 305 x 305 x 66

DinCell GHA

DinMet is a metal filter consisting of metal wires weaved into a special pattern to provide a high separation with a low pressure drop. The metal stitching is enclosed by a U profile and a metal support net on the inlet and outlet sides.

The metal components are available in aluminium, electro galvanized, stainless or acid resistant ver-sions.

Metal filters are suitable as prefilters for separating coarser particles, oil, Tectyl, grease, high humidity, as spark protection etc.

Advantages

• High separation of oil, grease 90-92 %

• Low pressure drop

• Large cooling surface

• Can be cleaned many times

• Tolerates powerful cleaning

• Manufactured in most sizes

• Tailored to customer's order

Metal filters

DinMet

D

B

H

Ordering example DinMet AL B x H x D

Frame Des.

Aluminium plate AL

Electro galvanized plate EL

Stainless plate frame RO

Acid resistant plate SY

Dinkök fat filter cells are manufactured from met-al wires weaved into a special pattern to provide a large cooling surface, high separation and low air resistance.

Special dimensions can be supplied on request.

Rec. final pressure drop 80-120 Pa

Advantages

• Can be cleaned in dishwasher

• High fat separation 90-95 %

• Low air resistance

• Long service life

• Suitable for most cooker hoods

• Handle provided for easy handling

Fat filter

DinKök

D

B

H

Name B H D Flow m3/h Initial pressure drop

DK 525 495 245 50 1000 45

DK 555 495 495 50 2000 30

DK 522 495 245 25 1000 40

DK 552 495 495 25 2000 25

Standard dimensions

Ordering example, as above.

Carbon filter F5 Frame type Plastic with header


D B

H

DinCarb V

DinCarb V is a pleated carbon filter with vertical filter banks. DinCarb V has a 25 mm enclosure frame and is mounted in the same way as bag filters. The large filter area provides a low initial pressure drop.

DinCarb V is used primarily to remove odours in the ventilation to offices and industry but also concentra-tions of solvents, ozone and nitrous fumes. DinCarb V can also be pleated with a F6 or F7 prefilter material.

DinCarb V is very stable with a short construction depth, moreover, it can be provided with protective grilles on the clean air side and it can be completely incinerated.

Media Activated carbon, 500 g/m2

Separator —Frame PlasticRec. final pressure drop 400 PaMax. temperature 50° C

25


DinCarb V 592 287 292 4.5 1600 / 90

DinCarb V 592 494 292 7 2400 / 90

DinCarb V 592 592 292 9 3200 / 90

Standard dimensions

Ordering example DinCarb V F5 592 x 287 x 292

20 40 60 80 100 120 140 160 180

Kol

0

50

100

150

200

250

Pres

sure

dro

p P

a

Carbon filter F6-F7 Frame type Plastic with header


D B

H

DinCarb V

25


DinCarb - F6 / F7 592 287 292 4 1600 / -120 / 130

DinCarb - F6 / F7 592 494 292 7 2400 / -120 / 130

DinCarb - F6 / F7 592 592 292 9 3200 / -120 / 130

Standard dimensions

Ordering example DinCarb V F6 592 x 287 x 292

20 40 60 80 100 120 140 160 180

Kol+F6Kol+F7

0

50

100

150

200

250

Pres

sure

dro

p P

a

DinCarb V is a pleated carbon filter with vertical filter banks. DinCarb V has a 25 mm enclosure frame and is mounted in the same way as bag filters. The large filter area provides a low initial pressure drop.

DinCarb V is used primarily to remove odours in the ven-tilation to offices and industry but also concentrations of solvents, ozone and nitrous fumes. DinCarb V can also be pleated with a F6 or F7 prefilter material.

DinCarb V is very stable with a short construction depth, moreover, it can be provided with protective grilles on the clean air side and it can be completely in-cinerated.

Media Activated carbon, 500 g/m2 + F6/F7Separator —Frame PlasticRec. final pressure drop 400 PaMax. temperature 50° C

Carbon filters Ends galvanized steel

Name Ø D L Volume dm3 Nom. air quantity m3/hr

DinCarb AKN 145 250 2.5 80

DinCarb AKN 145 450 4.4 150

DinCarb AKN 145 600 5.8 200

DinCarb AKN

Standard dimensions

DinCarb AKN is a cylindrical carbon filter that is mounted on an anchor plate with a bayonet catch.

DinCarb AKN is used primarily to remove odours in the ventilation to offices and industry but also concentra-tions of solvents, ozone and nitrous fumes. DinCarb AKN can be refilled.

DinCarb AKN can be supplied in stainless steel as well as impregnated carbon.

Media Activated carbon, pelletsEnds Galvanized steel plateJacket Galvanized perforated steel plateSeal 3 mm foam rubberPressure drop 110 PaMax. temperature 50° C

L

ØD

Ordering example DinCarb AKN L= 250


20 40 60 80 100 120 140 160 180

DinCarb AKN

020406080

100120140160180200

Pres

sure

dro

p P

a

Carbon filters Frame galvanized steel plate

Name H B D Carbon quantity kg Nom. air quantity m3/hr

DinCarb Panel 305 305 50 4.5 100

DinCarb Panel 610 305 50 9 200

DinCarb Panel 610 610 50 18 400

DinCarb Panel

Standard dimensions

Ordering example DinCarb Panel 305 x 305 x 50

Air velocity m/min

5 10 15 20 25 30 35 40

DinCarb Panel

0

50

100

150

200

250

300

Pres

sure

dro

p P

a w

ith

50 m

m c

arb

on b

ed

DinCarb Panel consists of a galvanized plate frame filled with activated carbon pellets. The filter can be supplied in stainless steel as well as impregnated carbon.

The filter is used primarily to remove odours in the ventilation to offices and industry but also to re-move low concentrations of solvents, ozone and nitrous fumes.

DinCarb Panel is available in all dimensions from 100 x 100 x 20 up to 610 x 1220 x 100 mm.

Media Activated carbon, pelletsInitial pressure drop with nom. air quantity 120 PaFrame Galvanized steel plateJacket Galvanized perforated steel plateSeal 6 mm foam rubberMax. temperature 50° C

H

B

D

Carbon filters Frame galvanized steel plate

Name H B D No. panels Carbon quantity kg Nom. air quantity m3/hr

DinCarb V KNG 305 305 150 3 3.5 250

DinCarb V KNG 610 305 150 3 7 500

DinCarb V KNG 610 610 150 6 14 1000

DinCarb V KNG 305 305 292 3 7 500

DinCarb V KNG 610 305 292 3 14 1000

DinCarb V KNG 610 610 292 6 28 2000

DinCarb V KNG

Standard dimensions

Ordering example DinCarb V KNG 305 x 305 x 150

Air velocity m/min

5 10 15 20 25 30 35 40

DinCarb Panel

0

50

100

150

200

250

300

Pres

sure

dro

p P

a w

ith

50 m

m c

arb

on b

ed

DinCarb Panel consists of a galvanized plate frame with vertical DinCarb panels. The filter can be sup-plied in stainless steel as well as impregnated carbon. DinCarb V can have different numbers of carbon panels depending on the desired air quantity, pres-sure drop or the concentration of impurities. The filter is used primarily to remove odours in the ven-tilation to offices and industry but also to remove low concentrations of solvents, ozone and nitrous fumes.

DinCarb V Panel is available in all dimensions from 305 x 305 x 150 up to 610 x 1220 x 292 mm.

Media Activated carbon, pelletsInitial pressure dropwith nom. airflow 170 PaFrame Galvanized steel plateJacket Galvanized perforated steel plateSeal 6 mm foam rubberMax. temperature 50° C

H

B

D

Carbon filters Frame type Plastic frame

DinCarb CNP

DinCarb CNP is a pleated carbon filter with a large filter area, which provides a low initial pressure drop. It is used primarily to remove odours in the ventilation to offices and industry as well as to remove low concentrations of solvents, ozone and nitrous fumes. DinCarb CNP can be incinerated and it is a very stable filter with a short construction depth.

The filter can be provided with protective grilles on the clean air side and it is also available in plate and cardboard frames. The carbon filter material can also be pleated with a F6 or F7 prefilter material and it is manufactured in the dimensions 100 x 100 up to 610 x 1220 and with frame depths 24, 48, 96 mm.

Media Activated carbon 500 g/m2

Initial pressure dropwith nom. air quantity 80 PaSeparators —Frame Plastic Rec. final pressure drop 400 PaMax. temperature 50° C

H

B

D

Name B H D Area m2 Nom. air quantity m3/hr at 80 Pa

DinCarb CNP 305 305 24 0.5 125

DinCarb CNP 610 305 24 1 250

DinCarb CNP 610 610 24 2 500

DinCarb CNP 305 305 48 1 250

DinCarb CNP 610 305 48 2 500

DinCarb CNP 610 610 48 4 1000

DinCarb CNP 305 305 96 1.5 300

DinCarb CNP 610 305 96 3.5 750

DinCarb CNP 610 610 96 7 1400

Standard dimensions

Ordering example DinCarb CNP 305 x 305 x 240


20 40 60 80 100 120 140 160 1800

20406080

100120140160

Pres

sure

dro

p P

a

DinCarb CNP

Carbon filters

DinCarb Media

DinCarb Media is a collective name for various types of carbon impregnated carrier materials.

DinCarb Media is available in 4 basic types.

1. PPI foam impregnated with powdered carbon

2. PPI foam impregnated with granulated carbon

3. Polyester mat impregnated with powdered car-

bon

4. Granulated carbon between 2 thin polyester

vlies

DinCarb Media is used primarily to remove odours in ventilation systems, kitchens, offices and indus-try but also to remove low concentrations of sol-vents, ozone and nitrous fumes.

DinCarb Media is available in all dimensions up to 1 x 2 m and in various thicknesses. DinCarb Media is available in cut pieces but also mounted in card-board, plate or plastic frames.

DinCarb can also be combined with different prefilter materials and HEPA filters.

DinCart

DinCartExample of filter combination: DinCart ACN.

Des. 1: A = ( Ends ), Galvanized steel plateDes. 2: C = ( Media), Cellulose Des. 3: N = ( Impregnation ), None

DinCart is manufactured with ends in plates, plastic or soft polyurethane. It is available in many diam-eters, from 50 to 700 mm, and lengths from 100 to 2000 mm.

For the filter material, Cellulose, Polyester or Glass Fibre are used. The material can be pleated in several layers and can also be combined with activated carbon.

The polyester material is also available in antistatic, Teflon or oleo phobic impregnated versions and the Cellulose material is available impregnated with a fire retardant.

Ends Des. 1 Media Des. 2 Impregnation Des. 3

Galvanized steel plate A Cellulose C None N

Cast aluminium B FR F

Threaded C Polyester P None N

Polyurethane D ALU A

A with rubber connector E TR T

Stainless steel plate F PTFE P

Plastic ends G Glass fibre G

Polypropylene O

Carbon pellets K

Impr. carbon pellets R

Glass fibre + Cellulose T

Carbon mat 500 g/m2 A

Key of terms for Ends - Media - Impregnation

Filter cartridge type A Ends galvanized steel plate

Name Ø Dy mm Ø Di mm L mm

DinCart A_ _ 150 89 100-1200

DinCart A_ _ 216 149 100-1200

DinCart A_ _ 262 150 100-1200

DinCart A_ _ 325 212 100-1200

DinCart A_ _ 351 240 100-1200

DinCart A_ _ 480 367 100-1200

DinCart A_ _ 562 459 100-1200

DinCart A

Standard dimensions

DinCart A is a cylindrical filter that is mounted on a drawbar and it can be supplied in a number of differ-ent diameters and lengths.

DinCart A can be delivered with one open and one closed end or with both ends open.

DinCart A can be used in many applications e.g. weld-ing, blasting, powder coating etc.

For the filter material, the following are used:Cellulose (C), Polyester (P), Glass fibre (G).The cellulose filter can be supplied with impregnated with a flame retardant, the polyester filter with anti-static (A) or Teflon (T) impregnation as well as with a Teflon membrane (P).

For the correct combination, see the key of terms.

Media Polyester or CelluloseEnds Galvanized steel plateJacket Galvanized expanded metalSeal Foam rubber packing on the open end as well as bottom seal round the central hole.Max. pressure drop 2500 PaMax. temp. 90° CMax. cleaning pressure 6 Bar

L

ØDy

ØDi

Ordering example DinCart A_ _ 150 x 100

Name Ø D mm R Number of mounting eyes L mm

DinCart B_ _ 150 ? 3 100-1200

DinCart B_ _ 150 ? 4 100-1200

DinCart B_ _ 225 ? 3 100-1200

DinCart B_ _ 225 ? 4 100-1200

DinCart B_ _ 325 ? 3 100-1200

DinCart B_ _ 325 (I) ? 3 100-1200

Standard dimensions

DinCart B is a cylindrical filter that is installed with 2-4 bolts in the filter unit. The filter's bottom end is avail-able closed.

DinCart B is available in various diameters and lengths.

DinCart B can be used in many applications e.g. weld-ing, blasting, powder coating etc.

For the filter material, the following are used:Cellulose (C), Polyester (P), Glass fibre (G).

The cellulose filter can be supplied with impregnated with a flame retardant, the polyester filter with antistat-ic (A) or Teflon (T) impregnation as well as with a Teflon membrane (P).


Media Polyester or CelluloseEnds Galvanized steel plateJacket Galvanized expanded metalSeal Seal on open endMax. pressure drop 2500 PaMax. temp. 90° CMax. cleaning pressure 6 Bar

L

ØD

Filter cartridge type B Ends cast aluminium

DinCart B

Ordering example DinCart B_ _ 3 150 x 100

R

C L

Name Ø D mm Thread RD L mm

DinCart C_ _ 115 RD60 100-1200

DinCart C_ _ 115 RD72 100-1200

DinCart C_ _ 120 RD73 100-1200

DinCart C_ _ 120 RD76 100-1200

DinCart C_ _ 150 RD100 100-1200

Standard dimensions

DinCart C is a cylindrical filter that is screwed in place against a threaded connector. The filter's bottom end is closed.

DinCart C is available in various diameters and lengths.

DinCart C can be used in many applications e.g. weld-ing, blasting, powder coating etc.


The cellulose filter can be supplied with impregnated with a flame retardant, the polyester filter with antistat-ic (A) or Teflon (T) impregnation as well as with a Teflon membrane (P).


Media Polyester or CelluloseEnds Galvanized steel plateJacket Galvanized expanded metalSeal Felt gasket on open endMax. pressure drop 2500 PaMax. temp. 90° CMax. cleaning pressure 6 Bar

L

ØD

Filter cartridge type C Ends Threaded galvanized steel plate

DinCart C

Ordering example DinCart C_ _ RD60 115 x 100 1 m2

RD


DinCart D_ _ 125 78 100-1200

DinCart D_ _ 150 92 100-1200

DinCart D_ _ 216 149 100-1200

DinCart D_ _ 325 214 100-1200

Standard dimensions

Filter cartridge type D Ends soft PUR ends

DinCart D

Ordering example DinCart D_ _ 125 x 100 1.5 m2

DinCart D is a cylindrical filter with ends in soft PUR. The filter can be supplied with two open PUR ends or one open PUR end and one closed plate end. DinCart D is available in various diameters and lengths.

DinCart D can be used in many applications e.g. in-dustrial vacuum cleaners, air purifiers and as an air filter for vehicles.

For the filter material, the following are used:Cellulose (C), Polyester (P), Glass fibre (G).The material can also be pleated in 2 and 3 layers.The cellulose filter can be supplied with impregnated with a flame retardant, the polyester filter with anti-static (A) or Teflon (T) impregnation as well as with a Teflon membrane (P).


Media Polyester or CelluloseEnds Soft PURJacket Galvanized expanded metalSeal —Max. pressure drop 2500 PaMax. temp. 90° CMax. cleaning pressure 6 Bar

L

ØDy

ØDi


DinCart E_ _ 150 89 100-1200

DinCart E_ _ 216 149 100-1200

DinCart E_ _ 262 150 100-1200

DinCart E_ _ 325 212 100-1200

DinCart E_ _ 351 240 100-1200

DinCart E_ _ 480 367 100-1200

DinCart E_ _ 562 459 100-1200

Standard dimensions

DinCart E is a cylindrical filtered that is mounted on a connector with the help of hose clips.

DinCart E is available in various diameters and lengths. The rubber collar sits round the open end's outer edge, with a breadth of approx. 100 mm.

DinCart E is primarily used for sawdust vacuum col-lectors but also for direct assembly on flexible ducts.

Polyester (P) is used as the filter material moreover, it can be supplied with antistatic (A) or Teflon (T) im-pregnation as well as with a Teflon membrane (P).


Media PolyesterEnds Galvanized steel plateJacket Galvanized expanded metalSeal Rubber connector 2 x 100 mmMax. pressure drop 1500 PaMax. temp. 70° CMax. cleaning pressure 4 Bar

L

ØDy

Filter cartridge type E Ends galvanized steel plate with rubber collar

DinCart E

Ordering example DinCart E_ _ 150 x 1000 10 m2

ØDi

100

mm

2 mm

DinCart F is a collective name for all of our special filters with different ends, fastenings and materials.

The filter can be straight, conical, cylindrical or oval, with reinforcing plates on the ends or jacket and have one open and one closed end or both ends open.

DinCart E is primarily used in smaller units e.g. industrial vacuum cleaners.


The cellulose filter can be supplied with impregnated with a flame retardant, the polyester filter with antistatic (A) or Teflon (T) impregnation as well as with a Teflon membrane (P).

Filter cartridge type F Ends galvanized steel plate

DinCart F

Draft free ventilationA ventilation system in textile is the cheapest al-ternative for supply air and an excellent alterna-tive to the traditional plate drum. Our textile air distribution hose effectively distributes the air over a large area and, moreover, avoids uncom-fortable drafts and noise in the premises. The air distribution hose is simple to install and it can be adapted as required. The hose also functions as an extra filter, for example in the wood industry, where the return air often goes via an air distribu-tion hose.

Advantages

• Extra filtration• Low noise level• Low installation cost• Easy and quick assembly• Moveable• Draft free air supply• Available in several colours• Does not become mouldy• Extremely low moisture absorption • Low weight• Washable• Support rings to maintain the shape

Dimensions & accessories:

Standard diameters:200, 315, 400, 500, 600, 630 mm

Length: As requested, max length per hose 14 m

Accessories: Joints, 90 degree bends, T-pieces, ceiling screws & suspension chain.

Horizontal installationDelivered ready for suspending, for example oncarrier wires with rope inset at the connection end, support ring sewn on with S-hook every running metre as well as end sewn closed. Hose clips included.

Vertical installationDelivered with or without support rings, bottom sewn closed with attachment eyes. Hose clips in-cluded.

The supply air diffuser can also be supplied with half the distribution zone.

Flow calculation for completed air distribution hose

Diameter 200 mm 315 m3/m/hr Diameter 315 mm 500 m3/m/hr Diameter 400 mm 630 m3/m/hr Diameter 500 mm 785 m3/m/hr Diameter 600 mm 950 m3/m/hr Diameter 800 mm 1,260 m3/m/hr

Air Distribution Hose and Supply Air Diffuser

DinTube

Quality is good, but the right quality is betterIf you want to use your filter to the maximum

– but with as few replacements as possible – you need to turn to a filter supplier who has the competence and the resources to recom-mend the right quality and who manufactures the right fit. We have the quality that matches your needs. To be able of producing a filter that is exactly right, it is necessary to take several factors into consideration, which together cre-ates a broad spectrum of variations. The factors that influence the filter's quality include the fi-bre mix, surface structure, mechanical/chemical treatment and assembly etc.

Always ask our advice when it is time to replace a filter. Then you can rest assured that you ob-tain the best possible for your equipment.

TetratexPTFE membrane for extreme separation and du-rability.

Version HEA polyester range with fine fibres that result in an increased separation efficiency as well as less risk for blinding. It can be combined with im-pregnation, which increases the cleanability in the case of damp and sticky dusts.

Version SL - specially adapted for the food industryWith a self-supporting structure, it is possible to increase the fibre quantity and thereby improve the filtration and capacity. A great advantage is that the material does not release any fibres or threads in seams and joints. The needle loom is also available in an antistatic version, contain-ing fibres that are coated with copper sulphide, which means that the material also has antibac-terial properties.

Filter Hoses and Filter Bags

DinTube Cassette

Properties of different fibresThere are a number of different fibres that we use, depending on the operation case.

Here are examples of some:

Filter Hoses and Filter Bags

DinTube

Filter Cabinet

DinBox

DinBox is suitable for several types of filter from our range.

DinPak

MaxFlo

DinCell

DinPleat

DinKol

DinGlas

Z-Pleat

and combinations of these.

Construction:

Electro galvanized steel plate as standard, it is also available in stainless or acid resistant steel plate. Non-insulated, condensation insulation 20 mm, double jacket with 40 mm thermal and condensation insulation as well as double jacket with 50 mm fire insulation.

Standard guide system is U profile with slide seal. In the case of higher filter class , eccentric locking should be used for the maximum sealing between filter and mounting strip.

PG join, flared flange, bottom with the desired type of connection as well as long junctions to optional connector can be provided.

Outlet for pressure meter.

Inspection hatch on hinges with locking wheel. Separate hatch with locking wheels is also avail-able.

Standard length for bag filters and compact filters, 600 and 850 mm respectively. Standard length for flat filter 220 mm.

When ordering, please state the construction desired according to the above, as well as the dimensions B x H x D. The hatch is always placed on the side designated as H. The filter cabinet can be rotated 180°.

The dimensions that are stated will be the con-nection dimensions.

H

B

D

DinGrip is a mounting frame for DinPak, MaxFlo, Pleat Header, DinCell, Header and similar with connection frame.

The frames are available in several standard sizes. These are built together into a larger framework or filter bank. The frames are manufactured from 1.25 mm galvanized steel plate and they are pro-vided with four strong locking rings to hold the fil-ter in place as well as rubber seals on the inside of the frame for the maximum seal against the filter.

To provide the best function and sealing, the frame is assembled so that the filter replacement is done form the dust side/inlet side.

The frames are bolted together for the highest stability. In the case of larger filter banks and flows, the support profiles should be mounted between the frames, at a suitable separation, to obtain the maximum stability and sealing.

Mounting frames

DinGrip

1000 2000 3000 4000 5000 60000

25

50

75

100

125

150

Star

t pre

ssur

e dr

op P

a

Air quantity m3/hr

D= 375 D= 525

D= 635

Filter class F5 592 x 592

Name B H D M2 Number of bags

MaxFlo G 592 592 375 4.6 10

MaxFlo G 592 592 525 6.5 10

MaxFlo G 592 592 635 7.8 10

MaxFlo G 592 592 375 3.7 8

MaxFlo G 592 592 525 5.2 8

MaxFlo G 592 592 635 6.5 8

MaxFlo G 592 592 375 2.9 6

MaxFlo G 592 592 525 4.0 6

MaxFlo G 592 592 635 5.0 6

MaxFlo®G is manufactured from a tried and tested glass fibre material with high dust retention and it is EUROV-ENT classified and tested according to SS-EN779. The filter has a guaranteed sealed front frame and is avail-able with several different filter media for the optimiza-tion of the LCC (life cycle cost).

Media Glass fibreFront frame Steel or PlasticRec. Final pressure drop 150-250 PaMax. Final pressure drop 450 PaMax. Operating temperature 70°CRelative humidity 100%

Filters in standard dimensions are supplied in a special green carton with handle. The carton is easy to carry and it simplifies the handling of used filters. A sealing strip is enclosed and it is to be used where several fil-ters are pushed in to the same guide. This is in order to achieve the maximum sealing and intended filter class. Apart from the filter modules that are stated in the ta-ble, MaxFlo®G is available in dimensions suitable for all the ventilation systems on the market.

D

B

H

MaxFlo®G

Technical data

When ordering, always state B x H x D, so as to obtain standing pockets.

The curves refer to filters with 8 bags. Nom. air quantity 2800 m3/hr

D

B

H


MaxFlo®G

Technical data


MaxFlo G 490 592 375 3.7 8

MaxFlo G 490 592 525 5.2 8

MaxFlo G 490 592 635 6.5 8

MaxFlo G 490 592 375 2.9 6

MaxFlo G 490 592 525 3.9 6

MaxFlo G 490 592 635 4.7 6

MaxFlo G 490 592 375 2.4 5

MaxFlo G 490 592 525 3.4 5

MaxFlo G 490 592 635 4.2 5

MaxFlo®G is manufactured from a tried and tested glass fibre material with high dust retention and it is EUROV-ENT classified and tested according to SS-EN779. The filter has a guaranteed sealed front frame and is avail-able with several different filter media for the optimi-zation of the LCC (life cycle cost).


Filters in standard dimensions are supplied in a spe-cial green carton with handle. The carton is easy to car-ry and it simplifies the handling of used filters. A seal-ing strip is enclosed and it is to be used where several filters are pushed in to the same guide. This is in order to achieve the maximum sealing and intended filter class. Apart from the filter modules that are stated in the table, MaxFlo®G is available in dimensions suitable for all the ventilation systems on the market.

1000 2000 3000 4000 5000 60000

25

50

75

100

125

150

Star

t pre

ssur

e dr

op P

a

Air quantity m3/hr

D= 375 D= 525

D= 635



The curves refer to filters with 5 bags. Nom. air quantity 1,700 m3/hr

D

B

H

MaxFlo®G

Technical data





MaxFlo G 287 592 375 2.3 5

MaxFlo G 287 592 525 3.2 5

MaxFlo G 287 592 635 3.9 5

MaxFlo G 287 592 375 1.9 4

MaxFlo G 287 592 525 2.6 4

MaxFlo G 287 592 635 3.2 4

MaxFlo G 287 592 375 1.5 3

MaxFlo G 287 592 525 2.0 3

MaxFlo G 287 592 635 2.5 3

500 1000 1500 2000 2500 30000

25

50

75

100

125

150

Star

t pre

ssur

e dr

op P

a

Air quantity m3/hr

D= 375 D= 525

D= 635




1000 2000 3000 4000 5000 60000

102030405060708090

Star

t pre

ssur

e dr

op P

a

Air quantity m3/hr


MaxFlo G 592 892 375 6.9 10

MaxFlo G 592 892 525 9.7 10

MaxFlo G 592 892 635 11.7 10

MaxFlo G 592 892 375 4.3 6

MaxFlo G 592 892 525 6.0 6

MaxFlo G 592 892 635 7.2 6

MaxFlo®G

Technical data

D= 375

D= 525

D= 635




D

B

H




1000 2000 3000 4000 5000 60000

20

40

60

80

100

Star

t pre

ssur

e dr

op P

a

Air quantity m3/hr


MaxFlo G 490 892 375 5.5 8

MaxFlo G 490 892 525 7.8 8

MaxFlo G 490 892 635 9.3 8

MaxFlo G 490 892 375 3.6 5

MaxFlo G 490 892 525 5.0 5

MaxFlo G 490 892 635 6.0 5

MaxFlo®G

Technical data

D= 375D= 525

D= 635




D

B

H




500 1000 1500 2000 2500 300001020304050607080

Star

t pre

ssur

e dr

op P

a

Air quantity m3/hr


MaxFlo G 287 892 375 3.4 5

MaxFlo G 287 892 525 4.9 5

MaxFlo G 287 892 635 5.9 5

MaxFlo G 287 892 375 1.6 3

MaxFlo G 287 892 525 3.0 3

MaxFlo G 287 892 635 3.6 3

MaxFlo®G

Technical data

D= 375D= 525

D= 635




D

B

H






Filters in standard dimensions are supplied in a special green carton with handle. The carton is easy to carry and it simplifies the handling of used filters. A sealing strip is enclosed and it is to be used where several fil-ters are pushed in to the same guide. This is in order to achieve the maximum sealing and intended filter class. Apart from the filter modules that are stated in the table, MaxFlo®G is available in dimensions suitable for all the ventilation systems on the market.

MaxFlo®G


MaxFlo G 592 592 375 4.6 10

MaxFlo G 592 592 525 6.5 10

MaxFlo G 592 592 635 7.8 10

MaxFlo G 592 592 375 3.7 8

MaxFlo G 592 592 525 5.2 8

MaxFlo G 592 592 635 6.5 8

MaxFlo G 592 592 375 2.9 6

MaxFlo G 592 592 525 4.0 6

MaxFlo G 592 592 635 5.0 6

Technical data

D

B

H

1000 2000 3000 4000 5000 60000

25

50

75

100

125

150

Star

t pre

ssur

e dr

op P

a

Air quantity m3/hr

D= 375

D= 525

D= 635



1000 2000 3000 4000 5000 60000

25

50

75

100

125

150

175

Star

t pre

ssur

e dr

op P

a

Air quantity m3/hr

D= 375

D= 525

D= 635

D

B

H


MaxFlo®G

Technical data


MaxFlo G 490 592 375 3.7 8

MaxFlo G 490 592 525 5.2 8

MaxFlo G 490 592 635 6.5 8

MaxFlo G 490 592 375 2.9 6

MaxFlo G 490 592 525 3.9 6

MaxFlo G 490 592 635 4.7 6

MaxFlo G 490 592 375 2.4 5

MaxFlo G 490 592 525 3.4 5

MaxFlo G 490 592 635 4.2 5







500 1000 1500 2000 2500 30000

25

50

75

100

125

150

Star

t pre

ssur

e dr

op P

a

Air quantity m3/hr

D

B

H

MaxFlo®G

Technical data

D= 375

D= 525

D= 635





MaxFlo G 287 592 375 2.3 5

MaxFlo G 287 592 525 3.2 5

MaxFlo G 287 592 635 3.9 5

MaxFlo G 287 592 375 1.9 4

MaxFlo G 287 592 525 2.6 4

MaxFlo G 287 592 635 3.2 4

MaxFlo G 287 592 375 1.5 3

MaxFlo G 287 592 525 2.0 3

MaxFlo G 287 592 635 2.5 3




1000 2000 3000 4000 5000 60000

102030405060708090

Star

t pre

ssur

e dr

op P

a

Air quantity m3/hr


MaxFlo G 592 892 375 6.9 10

MaxFlo G 592 892 525 9.7 10

MaxFlo G 592 892 635 11.7 10

MaxFlo G 592 892 375 4.3 6

MaxFlo G 592 892 525 6.0 6

MaxFlo G 592 892 635 7.2 6

MaxFlo®G

Technical data

D= 375

D= 525

D= 635




D

B

H




1000 2000 3000 4000 5000 60000

20

40

60

80

100

Star

t pre

ssur

e dr

op P

a

Air quantity m3/hr


MaxFlo G 490 892 375 5.5 8

MaxFlo G 490 892 525 7.8 8

MaxFlo G 490 892 635 9.3 8

MaxFlo G 490 892 375 3.6 5

MaxFlo G 490 892 525 5.0 5

MaxFlo G 490 892 635 6.0 5

MaxFlo®G

Technical data

D= 375D= 525

D= 635




D

B

H




500 1000 1500 2000 2500 300001020304050607080

Star

t pre

ssur

e dr

op P

a

Air quantity m3/hr


MaxFlo G 287 892 375 3.4 5

MaxFlo G 287 892 525 4.9 5

MaxFlo G 287 892 635 5.9 5

MaxFlo G 287 892 375 1.6 3

MaxFlo G 287 892 525 3.0 3

MaxFlo G 287 892 635 3.6 3

MaxFlo®G

Technical data

D= 375D= 525

D= 635




D

B

H





MaxFlo G 592 592 375 4.6 10

MaxFlo G 592 592 525 6.5 10

MaxFlo G 592 592 635 7.8 10

MaxFlo G 592 592 375 3.7 8

MaxFlo G 592 592 525 5.2 8

MaxFlo G 592 592 635 6.5 8

D

B

H

MaxFlo®G

Technical data




1000 2000 3000 4000 5000 60000

50

100

150

200

250

Star

t pre

ssur

e dr

op P

a

Air quantity m3/h

D= 525D= 635

D= 375




D

B

H

MaxFlo®G

Technical data





MaxFlo G 490 592 375 3.7 8

MaxFlo G 490 592 525 5.2 8

MaxFlo G 490 592 635 6.5 8

MaxFlo G 490 592 375 2.9 6

MaxFlo G 490 592 525 3.9 6

MaxFlo G 490 592 635 4.7 6

1000 2000 3000 4000 5000 60000

50

100

150

200

250

300

Star

t pre

ssur

e dr

op P

a

Air quantity m3/h

D= 525D= 635

D= 375




D

B

H

MaxFlo®G

Technical data





MaxFlo G 287 592 375 2.3 5

MaxFlo G 287 592 525 3.2 5

MaxFlo G 287 592 635 3.9 5

MaxFlo G 287 592 375 1.9 4

MaxFlo G 287 592 525 2.6 4

MaxFlo G 287 592 635 3.2 4

500 1000 1500 2000 2500 30000

50

100

150

200

250

Star

t pre

ssur

e dr

op P

a

Air quantity m3/h

D= 525D= 635

D= 375




1500 3000 4500 6000 6500 70000

50

100

150

200

Star

t pre

ssur

e dr

op P

a

Air quantity m3/hr


MaxFlo G 592 892 375 6.9 10

MaxFlo G 592 892 525 9.7 10

MaxFlo G 592 892 635 11.7 10

MaxFlo®G

Technical data

D= 375 D= 525

D= 635




D

B

H





MaxFlo G 490 892 375 5.5 8

MaxFlo G 490 892 525 7.8 8

MaxFlo G 490 892 635 9.3 8

MaxFlo®G

Technical data




D

B

H

1000 2000 3000 4000 5000 60000

20

40

60

80

100

120

Star

t pre

ssur

e dr

op P

a

Air quantity m3/hr

D= 375 D= 525

D= 635





MaxFlo G 287 892 375 3.4 5

MaxFlo G 287 892 525 4.9 5

MaxFlo G 287 892 635 5.9 5

MaxFlo®G

Technical data




D

B

H

1000 2000 3000 4000 5000 60000

50

100

150

200

250

Star

t pre

ssur

e dr

op P

a

Air quantity m3/hr

D= 375 D= 525

D= 635




1000 2000 3000 4000 5000 60000

50

100

150

200

250

300

350

Star

t pre

ssur

e dr

op P

a

Air quantity m3/hr

D= 525

D= 635

D

B

H

MaxFlo®G


MaxFlo G 592 592 375 4.6 10

MaxFlo G 592 592 525 6.5 10

MaxFlo G 592 592 525 7.8 10

MaxFlo G 592 592 635 3.7 8

MaxFlo G 592 592 635 5.2 8

MaxFlo G 592 592 525 6.5 8

Technical data




D= 375




1000 2000 3000 4000 5000 60000

50

100

150

200

250

300

Star

t pre

ssur

e dr

op P

a

Air quantity m3/hr

D= 525

D= 635

D

B

H

MaxFlo®G

Technical data


MaxFlo G 490 592 375 3.7 8

MaxFlo G 490 592 525 5.2 8

MaxFlo G 490 592 635 6.5 8

MaxFlo G 490 592 375 2.9 6

MaxFlo G 490 592 525 3.9 6

MaxFlo G 490 592 635 4.7 6




D= 375



500 1000 1500 2000 2500 30000

50

100

150

200

250

300

350

Star

t pre

ssur

e dr

op P

a

D= 525

D= 635

D

B

H

MaxFlo®G


MaxFlo G 287 592 375 2.3 5

MaxFlo G 287 592 525 3.2 5

MaxFlo G 287 592 635 3.9 5

MaxFlo G 287 592 375 1.9 4

MaxFlo G 287 592 525 2.6 4

MaxFlo G 287 592 635 3.2 4

Technical data


Air quantity m3/hr




D= 375




1000 2000 3000 4000 5000 60000

50

100

150

200

250

300

Star

t pre

ssur

e dr

op P

a

Air quantity m3/hr

D= 525

D= 635

D

B

H

MaxFlo®G


MaxFlo G 592 892 375 6.9 10

MaxFlo G 592 892 525 9.7 10

MaxFlo G 592 892 635 11.7 10

Technical data




D= 375




1000 2000 3000 4000 5000 60000

50

100

150

200

Star

t pre

ssur

e dr

op P

a

Air quantity m3/hr

D= 525

D= 635

D

B

H

MaxFlo®G

Technical data


MaxFlo G 490 892 375 5.5 8

MaxFlo G 490 892 525 7.5 8

MaxFlo G 490 892 635 9.3 8




D= 375



500 1000 1500 2000 2500 30000

50

100

150

200

Star

t pre

ssur

e dr

op P

a

D

B

H

MaxFlo®G

Technical data


Air quantity m3/hr





MaxFlo G 287 892 375 3.4 5

MaxFlo G 287 892 525 4.9 5

MaxFlo G 287 892 635 5.9 5

D= 525

D= 635

D= 375




1000 2000 3000 4000 5000 60000

50

100

150

200

250

300

350

Star

t pre

ssur

e dr

op P

a

Air quantity m3/hr

D= 525

D= 635

D

B

H

MaxFlo®G


MaxFlo G 592 592 375 4.6 10

MaxFlo G 592 592 525 6.5 10

MaxFlo G 592 592 525 7.8 10

MaxFlo G 592 592 635 3.7 8

MaxFlo G 592 592 635 5.2 8

MaxFlo G 592 592 525 6.5 8

Technical data




D= 375




1000 2000 3000 4000 5000 60000

50

100

150

200

250

300

Star

t pre

ssur

e dr

op P

a

Air quantity m3/hr

D= 525D= 635

D

B

H

MaxFlo®G

Technical data


MaxFlo G 490 592 375 3.7 8

MaxFlo G 490 592 525 5.2 8

MaxFlo G 490 592 635 6.5 8

MaxFlo G 490 592 375 2.9 6

MaxFlo G 490 592 525 3.9 6

MaxFlo G 490 592 635 4.7 6




D= 375



500 1000 1500 2000 2500 30000

50

100

150

200

250

300

350

Star

t pre

ssur

e dr

op P

a

D= 525

D= 635

D

B

H

MaxFlo®G


MaxFlo G 287 592 375 2.3 5

MaxFlo G 287 592 525 3.2 5

MaxFlo G 287 592 635 3.9 5

MaxFlo G 287 592 375 1.9 4

MaxFlo G 287 592 525 2.6 4

MaxFlo G 287 592 635 3.2 4

Technical data


Air quantity m3/hr




D= 375


DB

H

Filter class G4 592 x 592

1000 2000 3000 4000 5000 60000

102030405060708090

Star

t pre

ssur

e dr

op P

a

Air quantity m3/hr

MaxFlo®HL is manufactured from a class G4 synthet-ic media we have developed ourselves in accordance with EN779. The design of bag filter and filter media provides a very durable and stable filter.

Media Synthetic High-Loft Front frame PlasticRec. Final pressure drop 120-150 PaMax. Final pressure drop 450 PaMax. Operating temperature 70°CRelative humidity 100%

Filters in standard dimensions are supplied in a spe-cial green carton with handle. The carton is easy to carry and it simplifies the handling of used filters. A sealing strip is enclosed and it is to be used where several filters are pushed in to the same guide. This is in order to achieve the maximum sealing and intended filter class. Apart from the filter modules that are stated in the table, MaxFlo®HL is available in dimensions suitable for all the ventilation systems on the market.

MaxFlo®HL

Technical data


MaxFlo HL 592 592 300 2.3 6

MaxFlo HL 592 592 375 2.9 6

MaxFlo HL 592 592 525 3.9 6

MaxFlo HL 592 592 300 1.6 4

MaxFlo HL 592 592 375 2.0 4

MaxFlo HL 592 592 525 2.6 4



D= 375

D= 525

D= 300

D

B

H


1000 2000 3000 4000 5000 60000

20

40

60

80

100

120

Star

t pre

ssur

e dr

op P

a

D= 300

D= 375

MaxFlo®HL

Technical data


Air quantity m3/hr

MaxFlo®HL is manufactured from a class G4 synthet-ic media we have developed ourselves in accord-ance with EN779. The design of bag filter and filter media provides a very durable and stable filter.


Filters in standard dimensions are supplied in a spe-cial green carton with handle. The carton is easy to carry and it simplifies the handling of used filters. A sealing strip is enclosed and it is to be used where several filters are pushed in to the same guide. This is in order to achieve the maximum sealing and intended filter class. Apart from the filter modules that are stated in the table, MaxFlo®HL is available in dimensions suitable for all the ventilation sys-tems on the market.


MaxFlo HL 490 592 300 2.0 5

MaxFlo HL 490 592 375 2.4 5

MaxFlo HL 490 592 525 3.3 5

MaxFlo HL 490 592 300 1.2 3

MaxFlo HL 490 592 375 1.5 3

MaxFlo HL 490 592 525 1.8 3


D= 525


500 1000 1500 2000 2500 30000

102030405060708090

Star

t pre

ssur

e dr

op P

a

D= 375

D= 300

D

B

H

MaxFlo®HL

Technical data


Air quantity m3/hr

MaxFlo®HL is manufactured from a class G4 syn-thetic media we have developed ourselves in ac-cordance with EN779. The design of bag filter and filter media provides a very durable and stable filter.


Filters in standard dimensions are supplied in a spe-cial green carton with handle. The carton is easy to carry and it simplifies the handling of used filters. A sealing strip is enclosed and it is to be used where several filters are pushed in to the same guide. This is in order to achieve the maximum sealing and intended filter class. Apart from the fil-ter modules that are stated in the table, MaxFlo®HL is available in dimensions suitable for all the venti-lation systems on the market.


MaxFlo HL 287 592 300 1.2 3

MaxFlo HL 287 592 375 1.5 3

MaxFlo HL 287 592 525 2.0 3

MaxFlo HL 287 592 300 0.8 2

MaxFlo HL 287 592 375 1.0 2

MaxFlo HL 287 592 525 1.3 2


D= 525

DB

H


1000 2000 3000 4000 5000 60000

102030405060708090

Star

t pre

ssur

e dr

op P

a

Air quantity m3/hr

MaxFlo®HL is manufactured from a class G4 synthetic media we have developed ourselves in accordance with EN779. The design of bag filter and filter media provides a very durable and stable filter.


Filters in standard dimensions are supplied in a special green carton with handle. The carton is easy to carry and it simplifies the handling of used filters. A sealing strip is enclosed and it is to be used where several fil-ters are pushed in to the same guide. This is in order to achieve the maximum sealing and intended filter class. Apart from the filter modules that are stated in the table, MaxFlo®HL is available in dimensions suit-able for all the ventilation systems on the market.

MaxFlo®HL

Technical data


MaxFlo HL 592 592 300 2.3 6

MaxFlo HL 592 592 375 2.9 6

MaxFlo HL 592 592 525 3.9 6

MaxFlo HL 592 592 635 5.0 6

MaxFlo HL 592 592 300 1.6 4

MaxFlo HL 592 592 375 2.0 4

MaxFlo HL 592 592 525 2.6 4

MaxFlo HL 592 592 635 3.2 4



D= 525 D= 635D= 375

D

B

H


1000 2000 3000 4000 5000 60000

20

40

60

80

100

120

Star

t pre

ssur

e dr

op P

a

D= 375 D= 525

MaxFlo®HL

Technical data


Air quantity m3/hr


MaxFlo HL 490 592 300 2.0 5

MaxFlo HL 490 592 375 2.4 5

MaxFlo HL 490 592 525 3.3 5

MaxFlo HL 490 592 635 4.1 5

MaxFlo HL 490 592 300 1.2 3

MaxFlo HL 490 592 375 1.5 3

MaxFlo HL 490 592 525 1.8 3

MaxFlo HL 490 592 635 2.5 3


D= 635

MaxFlo®HL is manufactured from a class G4 synthet-ic media we have developed ourselves in accord-ance with EN779. The design of bag filter and filter media provides a very durable and stable filter.

Media Synthetic High-Loft Front frame Plastic Rec. Final pressure drop 120-150 PaMax. Final pressure drop 450 PaMax. Operating temperature 70°CRelative humidity 100%

Filters in standard dimensions are supplied in a spe-cial green carton with handle. The carton is easy to carry and it simplifies the handling of used filters. A sealing strip is enclosed and it is to be used where several filters are pushed in to the same guide. This is in order to achieve the maximum sealing and intended filter class. Apart from the filter modules that are stated in the table, MaxFlo®HL is available in dimensions suitable for all the ventilation sys-tems on the market.


500 1000 1500 2000 2500 30000

102030405060708090

Star

t pre

ssur

e dr

op P

a

D= 525D= 375

D

B

H

MaxFlo®HL

Technical data


Air quantity m3/hr


MaxFlo HL 287 592 300 1.2 3

MaxFlo HL 287 592 375 1.5 3

MaxFlo HL 287 592 525 2.0 3

MaxFlo HL 287 592 635 2.5 3

MaxFlo HL 287 592 300 0.8 2

MaxFlo HL 287 592 375 1.0 2

MaxFlo HL 287 592 525 1.3 2

MaxFlo HL 287 592 635 1.6 2


D= 635

MaxFlo®HL is manufactured from a class G4 syn-thetic media we have developed ourselves in ac-cordance with EN779. The design of bag filter and filter media provides a very durable and stable filter.


Filters in standard dimensions are supplied in a special green carton with handle. The carton is easy to carry and it simplifies the handling of used filters. A sealing strip is enclosed and it is to be used where several filters are pushed in to the same guide. This is in order to achieve the maxi-mum sealing and intended filter class. Apart from the filter modules that are stated in the table, MaxFlo®HL is available in dimensions suitable for all the ventilation systems on the market.

Filter class F5-F8 592 x 592

The curves refer to filters with 10 bags D dimension 635. Nom. air quantity 3,400 m3/hr

MaxFlo®S is manufactured from a synthetic melt-blown media in class F5-F8 according to EN779. This uses the latest technology for the manufacturing of ultra-fine fibres, The media has several filtration lay-ers. With the newly developed filter media, MaxFlo S can be manufactured with large filter surfaces, high filter class and low pressure drop.

Media SyntheticFront frame Steel, Plastic Rec. Final pressure drop 150-250 PaMax. Final pressure drop 450 PaMax. Operating temperature 70°CRelative humidity 100%

Filters in standard dimensions are supplied in a special green carton with handle. The carton is easy to carry and it simplifies the handling of used filters. A sealing strip is enclosed and it is to be used where several fil-ters are pushed in to the same guide. This is in order to achieve the maximum sealing and intended filter class. Apart from the filter modules that are stated in the table, MaxFlo®S is available in dimensions suit-able for all the ventilation systems on the market.

MaxFlo®S

F7

F5

F6

1000 2000 3000 4000 50000

25

50

75

100

125 F8

Initi

al p

ress

ure

drop

Pa

DB

H


MaxFlo S 592 592 375 4.6 10

MaxFlo S 592 592 525 6.5 10

MaxFlo S 592 592 635 7.8 10

MaxFlo S 592 592 375 3.7 8

MaxFlo S 592 592 525 5.2 8

MaxFlo S 592 592 635 6.5 8

Technical data

Air quantity m3/hr


F7

F5F6

1000 2000 3000 4000

F8

0

25

50

75

100

125



MaxFlo®S

Initi

al p

ress

ure

drop

Pa

D

B

H

Technical data


MaxFlo S 490 592 375 3.7 8

MaxFlo S 490 592 525 5.2 8

MaxFlo S 490 592 635 6.5 8

MaxFlo S 490 592 375 2.9 6

MaxFlo S 490 592 525 3.9 6

MaxFlo S 490 592 635 4.7 6



Filters in standard dimensions are supplied in a spe-cial green carton with handle. The carton is easy to carry and it simplifies the handling of used filters. A sealing strip is enclosed and it is to be used where several filters are pushed in to the same guide. This is in order to achieve the maximum sealing and in-tended filter class. Apart from the filter modules that are stated in the table, MaxFlo®S is available in dimensions suitable for all the ventilation systems on the market.

Air quantity m3/hr


F7

F5

F6

500 1000 1500 2000 2500

F8

0

25

50

75

100

125



MaxFlo®S

Initi

al p

ress

ure

drop

Pa

Technical data


MaxFlo S 287 592 375 2.3 5

MaxFlo S 287 592 525 3.2 5

MaxFlo S 287 592 635 3.9 5

MaxFlo S 287 592 375 1.9 4

MaxFlo S 287 592 525 2.6 4

MaxFlo S 287 592 635 3.2 4



Filters in standard dimensions are supplied in a special green carton with handle. The carton is easy to carry and it simplifies the handling of used filters. A sealing strip is enclosed and it is to be used where several fil-ters are pushed in to the same guide. This is in order to achieve the maximum sealing and intended filter class. Apart from the filter modules that are stated in the table, MaxFlo®S is available in dimensions suit-able for all the ventilation systems on the market.

D

B

H

Air quantity m3/hr



The curve refer to filters with 4 bags D dimension 635. Nom. air quantity 3,400 m3/hr

GreenFlo®HL is our new synthetic filter media quality tested according to EN779:2002 with the same high performance as the rest of our range. GreenFlo air filter, with patent-pending technology developed by Dinair, is the first filter in the world manufactured from renewable "green plastic".

Media Synthetic High-LoftFront frame Steel or PlasticRec. Final pressure drop 150-250 PaMax. Final pressure drop 450 PaMax. Operating temperature 70°CRelative humidity 100%

Filters in standard dimensions are supplied in a spe-cial green carton with handle. The carton is easy to carry and it simplifies the handling of used filters. A sealing strip is enclosed and it is to be used where several filters are pushed in to the same guide. This is in order to achieve the maximum sealing and in-tended filter class. Apart from the filter modules that are stated in the table, GreenFlo®HL is available in dimensions suitable for all the ventilation systems on the market.

D

B

H

GreenFlo®HL

0

25

50

75

100

125

F5

1000 2000 3000 4000 5000

Initi

al p

ress

ure

drop

Pa


GreenFlo 592 592 375 2.0 4

GreenFlo 592 592 525 2.6 4

GreenFlo 592 592 635 3.2 4

GreenFlo 592 592 375 2.9 6

GreenFlo 592 592 525 3.9 6

GreenFlo 592 592 635 5.0 6

Technical data


Air quantity m3/hr



GreenFlo®HL is our new synthetic filter media quality tested according to EN779:2002 with the same high performance as the rest of our range. GreenFlo air filter, with patent-pending technology developed by Dinair, is the first filter in the world manufactured from renewable "green plastic".

Media Synthetic High-LoftFront frame Steel or PlasticRec. Final pressure drop 150-250 PaMax. Final pressure drop 450 PaMax. Operating temperature 70°CRelative humidity 100%

Filters in standard dimensions are supplied in a spe-cial green carton with handle. The carton is easy to carry and it simplifies the handling of used filters. A sealing strip is enclosed and it is to be used where several filters are pushed in to the same guide. This is in order to achieve the maximum sealing and in-tended filter class. Apart from the filter modules that are stated in the table, GreenFlo®HL is available in dimensions suitable for all the ventilation systems on the market.

GreenFlo®HL

Initi

al p

ress

ure

drop

Pa


GreenFlo 490 592 375 1.5 3

GreenFlo 490 592 525 2.0 3

GreenFlo 490 592 635 2.5 3

GreenFlo 490 592 375 2.4 5

GreenFlo 490 592 525 3.0 5

GreenFlo 490 592 635 4.1 5

Technical data

D

B

H

0

25

50

75

100

125

F5

1000 2000 3000 4000 5000

Air quantity m3/hr




GreenFlo®HL is our new synthetic filter media qual-ity tested according to EN779:2002 with the same high performance as the rest of our range. Green-Flo air filter, with patent-pending technology devel-oped by Dinair, is the first filter in the world manufac-

tured from renewable "green plastic".Media Synthetic

High-LoftFront frame Steel or PlasticRec. Final pressure drop 150-250 PaMax. Final pressure drop 450 PaMax. Operating temperature 70°CRelative humidity 100%

Filters in standard dimensions are supplied in a spe-cial green carton with handle. The carton is easy to car-ry and it simplifies the handling of used filters. A seal-ing strip is enclosed and it is to be used where several filters are pushed in to the same guide. This is in order to achieve the maximum sealing and intended filter class. Apart from the filter modules that are stated in the table, GreenFlo®HL is available in dimensions suit-able for all the ventilation systems on the market.

GreenFlo®HL

Initi

al p

ress

ure

drop

Pa


GreenFlo 287 592 375 1.0 2

GreenFlo 287 592 525 1.3 2

GreenFlo 287 592 635 1.6 2

GreenFlo 287 592 375 1.5 3

GreenFlo 287 592 525 2.0 3

GreenFlo 287 592 635 2.5 3

Technical data

D

B

H

0

25

50

75

100

125

F5

500 1000 1500 2000 2500

Air quantity m3/hr


Filter class F5, F6, F7 592 x 592


GreenFlo is our new synthetic filter media quality tested according to EN779:2002 with the same high performance as the rest of our range. GreenFlo air filter, with patent-pending technology developed by Dinair, is the first filter in the world manufactured from renewable "green plastic", a mixture of so-called PLA fibres extracted from plant starch.

Media SyntheticFront frame Steel or PlasticRec. Final pressure drop 150-250 PaMax. Final pressure drop 450 PaMax. Operating temperature 70°CRelative humidity 100%

Filters in standard dimensions are supplied in a spe-cial green carton with handle. The carton is easy to carry and it simplifies the handling of used filters. A sealing strip is enclosed and it is to be used where several filters are pushed in to the same guide. This is in order to achieve the maximum sealing and in-tended filter class. Apart from the filter modules that are stated in the table, GreenFlo is available in dimen-sions suitable for all the ventilation systems on the market.

DB

H

GreenFlo

Initi

al p

ress

ure

drop

Pa


GreenFlo 592 592 375 3.7 8

GreenFlo 592 592 525 5.2 8

GreenFlo 592 592 635 6.5 8

GreenFlo 592 592 375 4.6 10

GreenFlo 592 592 525 6.5 10

GreenFlo 592 592 635 7.8 10

Technical data


0

25

50

75

100

125

F7

F5

F6

1000 2000 3000 4000 5000

Air quantity m3/hr






D

B

H

GreenFlo

Initi

al p

ress

ure

drop

Pa


GreenFlo 490 592 375 2.9 6

GreenFlo 490 592 525 3.9 6

GreenFlo 490 592 635 4.7 6

GreenFlo 490 592 375 3.7 8

GreenFlo 490 592 525 5.2 8

GreenFlo 490 592 635 6.5 8

Technical data

0

25

50

75

100

125F7

F5

F6

1000 2000 3000 4000

Air quantity m3/hr







D

B

H

GreenFlo

Initi

al p

ress

ure

drop

Pa


GreenFlo 287 592 375 1.9 4

GreenFlo 287 592 525 2.6 4

GreenFlo 287 592 635 3.2 4

GreenFlo 287 592 375 2.3 5

GreenFlo 287 592 525 3.2 5

GreenFlo 287 592 635 3.9 5

Technical data

0

25

50

75

100

125

F7

F5

F6

500 1000 1500 2000 2500

Air quantity m3/hr


Filter class G3-F5 592 x 592



DinPak 592 592 375 2.0 4

DinPak 592 592 525 2.6 4

DinPak 592 592 635 3.2 4

DinPak 592 592 375 2.9 6

DinPak 592 592 525 3.9 6

DinPak 592 592 635 5.0 6

DinPak is available with a one-use frame and as a re-fillable system. A tried and tested bag filter construc-tion that meets the highest requirements for form stability. DinPak has a design with an inner frame that guarantees the air tightness. The filters has damp re-sistant and rear resistant filter media of polyester PE, polypropylene PP. These are good from a work envi-ronment perspective and provide energy back as af-ter use the filter is destroyed by incineration.

DinPak has a very high dust retention and low pres-

sure drop, which gives a good economy.

Media SyntheticFront frame Steel, wood refillRec. Final pressure drop 150-250 PaMax. Final pressure drop 450 Pa

Filters in standard dimensions are supplied in a special green carton with handle. The carton is easy to carry and it simplifies the handling of used filters. A sealing strip is enclosed and it is to be used where several filters are pushed in to the same guide. This is in order to achieve the maximum sealing and intended filter class. Apart from the filter modules that are stated in the table, DinPak is available in dimensions suitable for all the ventilation systems on the market.

D

B

H

DinPak

Technical data

0

25

50

75

100

125

F5

G3

G4

1000 2000 3000 4000 5000

Initi

al p

ress

ure

drop

Pa

Air quantity m3/hr





DinPak 490 592 375 1.5 3

DinPak 490 592 525 2.0 3

DinPak 490 592 635 2.5 3

DinPak 490 592 375 2.4 5

DinPak 490 592 525 3.3 5

DinPak 490 592 635 4.1 5

DinPak is available with a one-use frame and as a refillable system. A tried and tested bag filter con-struction that meets the highest requirements for form stability. DinPak has a design with an inner frame that guarantees the air tightness. The filters has damp resistant and rear resistant filter media of polyester PE, polypropylene PP. These are good from a work environment perspective and provide energy back as after use the filter is destroyed by incineration. DinPak has a very high dust retention and low pres-sure drop, which gives a good economy.

Media SyntheticFront frame Steel, wood refillRec. Final pressure drop 150-250 PaMax. Final pressure drop 450 PaFilters in standard dimensions are supplied in a special green carton with handle. The carton is easy to carry and it simplifies the handling of used filters. A sealing strip is enclosed and it is to be used where several filters are pushed in to the same guide. This is in order to achieve the maximum sealing and intended filter class. Apart from the filter modules that are stated in the table, DinPak is available in dimensions suitable for all the ventilation systems on the market.

D

B

H

DinPak

Technical data

0

25

50

75

100

125

F5

G3

G4

1000 2000 3000 4000 5000

Initi

al p

ress

ure

drop

Pa

Air quantity m3/hr





DinPak 287 592 375 1.0 2

DinPak 287 592 525 1.3 2

DinPak 287 592 635 1.6 2

DinPak 287 592 375 1.5 3

DinPak 287 592 525 2.0 3

DinPak 287 592 635 2.5 3

DinPak is available with a one-use frame and as a re-fillable system. A tried and tested bag filter construc-tion that meets the highest requirements for form stability. DinPak has a design with an inner frame that guarantees the air tightness. The filters has damp re-sistant and rear resistant filter media of polyester PE, polypropylene PP. These are good from a work envi-ronment perspective and provide energy back as af-ter use the filter is destroyed by incineration.

DinPak has a very high dust retention and low pres-

sure drop, which gives a good economy.

Media SyntheticFront frame Steel, wood refillRec. Final pressure drop 150-250 PaMax. Final pressure drop 450 Pa

Filters in standard dimensions are supplied in a special green carton with handle. The carton is easy to carry and it simplifies the handling of used filters. A sealing strip is enclosed and it is to be used where several filters are pushed in to the same guide. This is in order to achieve the maximum seal-ing and intended filter class. Apart from the filter modules that are stated in the table, DinPak is available in dimensions suitable for all the ventilation systems on the market.

D

B

H

DinPak

Technical data

0

25

50

75

100

125

F5

G3

G4

500 1000 1500 2000 2500

Initi

al p

ress

ure

drop

Pa

Air quantity m3/hr


In all forms of spray booth and lacquering fa-cilities, it is desirable to provide the facility with clean, filtered air as well as to remove and sepa-rate, among other things, pigment particles that are damaging to the lacquered surface.

The purification takes place in several steps, de-pending on the various types of lacquering facili-ties, production lines, repair box etc. Prefiltering is performed with bag filters. The most impor-tant link in the whole facility is the ceiling filter. This should be clean and distribute the air evenly in the spray booth.

The harmful particles for a lacquer are those larg-er than 5 µm. These particles must be prevented from reaching the lacquer surface by using good filtration, work methods and the design of the facility.

In a drying oven, hot air is circulated that also must be filtered in order for the lacquered sur-face not to become contaminated. For these ends, there are special high temperature filters available. DinPleat and DinHeat, 200-300°C.

Lacquering facility and filter

Surface treatment

Schematic diagram of a lacquering facility and the filters that occur therein.

1. Prefilter MaxFlo G4-F62. Intermediate filter MaxFlo F6-F83. Ceiling filter CC-600 G4. Extract air filter DinGlas Green, Yellow DL-9005. Extract air filter MaxFlo F5-F8

6. Prefilter MaxFlo F5-F87. High temp. filter DinCell HT8. Ceiling filter DinHeat 200-300°C9. Extract air filter DinCell HT

21

3

67

4

5 9

8

Heat exchanger

Heat exchanger

Lacquering booth Drying oven

Filter lacquering booth Filter drying oven

To achieve a high level of cleanliness and thereby longer operating life for the ceiling filter, the air should be purified in different steps. A prefilter is a must, and this is done best using the bag filter MaxFlo G4-F6.

Intermediate filtration is advantageous, where possible, where the air is purified fur-ther and the ducts and other equipment be-fore the ceiling filter are protected. Suitable filters are MaxFlo F5-F8.

Prefilter, Intermediate Filter and Ceiling Filter

Surface treatment

Prefilter and Intermediate Filter

When selecting ceiling filter, the following factors are very important:

• DIN identification• Vibration secured• High dust holding capacity• High separation• No fibre release• Fire resistant

Ceiling filter

CC-600 fulfils these requirements by a good margin and this makes it a unique ceiling filter media.

• The final filter, which for lacquering prevents damaging particles from passing• Fire classed according to UL class 1 and self-extinguishing according to DIN 53438-F1• 100% impregnation of the media's fibres for the maximum separation and dust holding capacity• Classified RO with respect to particle release• Backing with temperature resistance, up to 180°C• Quality guarantee with DIN CERTO identification number

Picture copyright Filtrair®

CC-600 G is a filter media specially produced to separate damaging particles from the air in all types of lacquering facilities. For smaller repair facilities as well as for the vehicle industry. Under all conditions, the media give a laminar airflow.

This media obtains its unique performance from a progressive multi-layering of brake-proof [sic] fibres. These are 100% treated with a specially produced adhesive. The clean air side is covered with a very strong fabric to prevent damage and to give the mat stability.

The media is thermally bound and treated with an adhesive that prevents fibre and particle re-lease of damaging particles larger than 5 µm. This applies under varying operating conditions.

These properties contribute to a constant lami-nar flow in the entire lacquering booth, with low pressure drop and high dust holding capacity.

Taken altogether, CC-600 G is a media the pro-vides unique performance to low operating and maintenance costs.

Product description CC-600

Surface treatment

Description

CC-600 is classified according to DIN-53438-F1 and is self-extinguishing. The media is manufac-tured in a silicon environment and, moreover, it is resistant to solvents. The clean air side's backing is a smooth net that tolerates temperatures up to 180°C without discolouring.

CC-600 G is subjected to continually quality con-trols according to EN 779:2002 and has the DIN and FILTRAIR reg. no. PFE 035/07 as well as filter class F5 stamped on the clean air side. CC-600 G is approved by many major vehicle manufac-tures, such as Daimler, Chrysler and Volkswagen. Lacquer test according to IPA Frankhofer Insti-tute.

Temperature resistance Quality guarantee


Technical data CC-600 G

Surface treatment

Test data

Nom. airflow 900 m3/hr.m2

Nom. air velocity 0.25 m/s

Rec. pressure drop 26 Pa

Final pressure drop 450 Pa

Separation efficiency at 0.4µm* 57%

Average separation efficiency 98%

Dust holding capacity 509 g/m2

Filter class with respect to EN 779:2002 F5

*) Test aerosol DEHS with respect to 779:2002

Application parameters

Temp. resistant Up to 100°C

for short peaks Up to 180°C

Nominal thickness 20 mm

Humidity resistance 100%

Roll size 1 x 20, 2 x 20 m

Cleanable no

Test classes Number of particles*

R0 < 100

R1 < 1.000

R2 < 10.000

R3 < 100.000

0

20

40

60

80

100

120

140

0 0,250,25 0,50 0,75 1,0

0,1 1 100

102030405060708090

100

Filtrair Migration testParticle release

*) Number of particles greater than 10 µm/m3 calculated on the clean air side.

Pres

sure

dro

p P

a

Airflow m/s

Pressure Drop / Airflow

0

20

40

60

80

100

120

140

0 0,250,25 0,50 0,75 1,0

0,1 1 100

102030405060708090

100

Particle size µm

Separation efficiency/Particle sizeSe

par

atio

n effi

cien

cy

CC-600 G

CC-600 G


In those cases where damage occurs to lacquered surfaces, due to dirt and fibres, it is often stated that "it is the filter's fault".

From our long experience with FILTRAIR® CC-600 G, we can say that in 99 cases of 100 this is not the case. Damaging dust greater than 5 µm does to penetrate and the media's 50-70 mm long fibres are not released. This is on the condition that the filter is undamaged and correctly installed. To lo-calise the source of lacquer damage, there are a number of causes to be considered. We consider here some of the actions that should be taken:

• Make sure the filter is correctly installed. The side with the DIN identification is the clean air side and it must be at the bottom of the box.

• Check the seal between the filter frame and the media.

• Make sure that fibre threads have not fastened in the grill fabric, frames etc during the filter replacement.

• Run the box with the maximum air flow after replacing a filter so any fibres that have fastened on the mat during transport and assembly dis-appear.

• Change filter when the final pressure drop is reached.

• Measure the box's overpressure.

• Measure the air velocity and air quantity.

• Check the air currents directed downwards and any turbulence with smoke cartridges.

• Check the personnel's clothing and equipment. In 9 cases of 10, lacquer damage is caused by fibres from clothing, masking tape and drying clothes.

• Clean the object to be lacquered as carefully as possible. However, particle counts have shown that it is never possible to obtain complete cleanliness from damaging particles with a second-hand painting object.

• Do not let the doors to the lacquering boothstand open unnecessarily, especially when it is still warm. The temperature difference between the box and the work place attracts the colder outdoor air, which is then set in movement and carries along different types of fibres and dust from the work place's floor. The cooler air streams from the work place into the lacquer-ing booth up to the filter ceiling, where fibres and damaging particles fasten on the filter's clean air side.

When the box is started up for the next object to be lacquered these particles loosen and fall down with serious damage as a consequence. This phenomenon is particularly manifest in our cold climate.

• Check the compressed air filter, so the air is free from impurities.

• Check that the lacquer is completely clean.

• Keep the box clean. Cleaning the fittings, grille cloth, frames, floor etc.

Our products for air filtration in lacquering facilities give you the greatest possibility of achieving the best results.

Views on lacquer damage and practical advice

Surface treatment

High temperature filter

DinHeat Panel

In the case of heating and filtering hot circulation air in drying ovens, filters are required that tolerate temperatures up to 300° C.

For this purpose we have produced two different products.

DinHeat Panel

Cassette specially produced for filtering hot circulating air in drying ovens and lac-quering booths. Also for filtration of hot gases and air 200-300° C.

Construction

The filter packet consists of glass fibre

gauze surrounded by extruded aluminium.

Designation: HT 350 HT 750 HT 1000

Format 480 x 480 x 14 480 x 480 x 14 480 x 480 x 14

Separation efficiency in %

according to DIN 24185 98 95 93

Nom. airflow m3/h 350 750 1000

Initial pressure drop Pa 60 60 60

Rec. final pressure drop Pa 250 250 250

Temp. resistance °C 200 200 300

Technical data

High temperature filter

DinCell HT

DinCell HT

DinCell HT is a deep pleated compact filter with a large filter surface and short installation dimension.

DinCell HT is used in drying ovens where high requirements are set for the filter separation effi-ciency, F6 and F8, as well as high temperature re-sistance, 400°C.

Construction

All the steel components are formed from aluzinc. The is to prevent particle release, which can occur with galvanized steel at high temperatures. The cassette is joined together mechanically, which re-sults in a filter with high stability as large stresses and strains.

DinCell Ht does not contain any form of adhesive, glue or sealant and, moreover, it is completely sili-con free. The filter is provided with a support net and profiles on the inlet and outlet sides to give good stability.

DinCell Ht has a filter media of ultra-fine glass fibre to obtain the maximum separation and dust hold-ing capacity at low pressure drop. The media us separated with aluminium separators to allow the air to flow freely through the filter packet.

A special seal, in temperature resistant glass fibre, is available for the frame round the filter.

Name B H D Area m2 Nom. air quantity m3/h

DinCell HT 305 305 150 3 600

DinCell HT 494 494 150 7 1300

DinCell HT 305 610 150 5 1000

DinCell HT 610 610 150 11 2000

DinCell HT 305 305 292 5 800

DinCell HT 494 494 292 16 2200

DinCell HT 287 610 292 11 1600

DinCell HT 610 610 292 22 3000

Standard dimensions

Ordering example DinCell HT F6 305 x 305 x 150

D

B

H

Pigment trap

Extract air filter

DinGlas Green

DinGlas is a progressively formed glass fi-

bre media for separating pigment particles in surface treatment facilities. It is a dry media and it is used with advantage for in-dustrial painting, car spraying, painting of woodwork and Tectyl treatment. For tech-nical data, see separate sheet.

DinGlas Yellow

DinGlas is a progressively formed glass fi-

bre media for separating pigment particles in surface treatment facilities. The media is oiled and it is used with advantage when water based paints are used. For technical data, see separate sheet.

DL-900

DL-900 is an extract hair filter for use in spray painting facilities. Suitable for pig-ment particles, glue, polyester etc. The filter is a so-called labyrinth filter in a pleated de-sign and it is manufactured from two layers of strong card, with a reinforcing band sta-pled on to maintain the correct pleat gap.

Where wet scrubbing does not take place, different types of filter are used. The most common are dif-ferent types of glass media, such as DinGlas dry or oiled as well as DL-900, which is a pleated labyrinth filter made form paper. A combination of these filters can also be used.

Pigment trap

DL-900

DL-900 is an extract hair filter for use in spray painting facilities. Suitable for pigment particles, glue, polyester etc.

The filter is a so-called labyrinth filter in a pleated design and it is manufactured from two layers of strong card, with a reinforcing band stapled on to maintain the correct pleat gap.

DL-900 has the following advantages:

• It copes with large air quantities under high loads

• Long service life

• Self-supporting

• Low transport volume

• Up to 98% separation

• Reinforcement band that secures the pleat gap for guaranteed performance

Standard dimensions held in stock:

DL-900 0.92 x 9.2 m

DL-1000 1.0 x 10.0 m

DL-900

L x B x D 9240 x 920 x 65 mm

Number of pleats 240

Initial pressure drop 35-80 Pa

Rec. final pressure drop 130-250 Pa

Air quantity m3/h 1800-3600

Temperature resistance max 180°C

Technical data

Domestic ventilation

We offer a complete program of small filters for home ventilation. For example, we have expanded surface panel filters with high air cleaning index, F7, which results in a better purification on the sup-ply side than offered by a standard filter.

On the extract air side, a washable metal mesh fat filter or a hygienic single-use filter can be chosen, for example for a kitchen fan. The filter is cost effective and it has a low pressure drop that is suited to exactly the type of smaller fan that are found in the home, air heat pumps and vehicles.

The range includes expanded surface panel filters that provide a higher air cleaning index than panel filters, e.g. in Minimaster units. We also have hy-gienic and effective single-use filters that replace older metal gauze filters to a low cost.

In many homes, dirt and textile dust in the air ducts results in reduced air replenishment and poor indoor air. Another consequence that follows from poor indoor air is the problem of damp.

With the extract air filters Dinair-FF 100, 125 and 160 for standard venti-lators and filter units, MD for tumble driers/laundries, these problems can be avoided in a simple and cost effec-tive way.

Thanks to large series production, which is combined with our industrial filter manufacturing, we can offer very competitive prices.

Accessories

DinPart

DinCleanFor cleaning of batteries and heat exchangers. Supplied as concentrate. Particularly mild on aluminium.

Respiratory protectionShort-term dust protection with or without exhaling valve.

Differential pressure meterFor measuring pressure drop across filters. For simpler to more advanced applications.

GlovesSeveral versions depending on the needs.

Plastic bagsFor packing and transporting contaminated filters.

Carbon dioxide meterEasy measurement of the carbon dioxide level in the air.

Monometer fluidAvailable in various colours and bottle sizes.

OverallsShort-term overall in ventilated non-woven material. With or without hood.

Documents

New Filton Product Catalogue