New Direct Aiming Station

PRODUCT INFORMATIONDS

Featuring

Auto Collimation feature

- More than what human Eyes can do!

- Higher Productivity in your job field!

Support “Quick” and “Accurate” in your field work

Automatically searches and display center of the Prism

What you can do with

Provides consistent collimation accuracy speed regardless of operators skill levels

Just Rough Aiming and press measuring button!!

Save time and eliminate Human Error !!

Rough Aim Measure Search Lock

Auto Collimation feature

- No need to look into an eyepiece!!- No need Horizontal or Vertical motion on tangent screw!!

In the dark Above Heat haze

With dust In the Long distance

In the wood In the fog In the Heavy traffic

DS will support you “Quick” and “Accurate” field work

DS will find and search prism center in any locations

You don’t have to adjust Vertical or Horizontal screw

Just Rough Aiming and press measuring button!!

What you can do with New DS (AC technology)

- More than what human Eyes can do!1. Easy to find and lock prism in any conditions!!2. Display angles for center of prism (Easy TOPO)

- Higher Productivity in your job field!1. Automatically turn to next “Stake Out” point (Easy Stake-out)

2. Automatic Double face measurement 3. Mesh Scan with MAGNET field software

DS series provides consistent collimation accuracy speed regardless of operators skill levels

Easy “TOPO” operation

Easy “Stake-out” operation

TS operation side doesn’t have to be skilled.

Just “Rough Aim” and “Press button”

If you use Data Collector You can realize One–man survey

It will automatically aim to next point

“Quick” & “Accurate” in your field work

“Semi-One man” in your field work

“Mesh Scan” operation

Support As-build measurment and volume calculation in your job site

Select “Scanning” menu on MAGNET field On-Board

“Simple” & “Easy” Mesh Scan in your field work

Supported by MAGNET Field

EDM

New DS Introduction

Body

Plus

DS

Prism 5,000m

Accuracy +/- (1.5mm + 2ppm)

Non-Prism 1,000m

Accuracy +/- (2mm + 2ppm) +Ultra-Powerful, Advanced EDM

Auto Collimation feature

MAGNET Field

5.6kg 5.7kg 6.9kg

230(W)x207(D) x393(H)mm

6.1kg

207(W)x174(D) x372(H)mm

191(W)x174(D) x348(H)mm

191(W)x174(D) x348(H)mm

Direct Aiming Station

DS

348372

393

2445

21

191 191 207 230

174 174 207174

You can feel compact size compare to PS

30% smaller 12% lighter than PS

Imaging

Robotic

Basic

Win CE

PS

Auto Collimation

ES

OS

Product Positioning

Build up your market with DSAuto collimation function!!

Easy “TOPO” Easy “Stake-out”

IS

Basic specification Comparison

Specifications ES OS DS PS

Prism 4,000m 5,000m

Accuracy +/- (2mm + 2ppm) +/- (1.5mm + 2ppm)

Non-Prism 500m 1,000m

Accuracy +/- (3mm + 2ppm) +/- (2mm + 2ppm)

Functions ES OS DS PSAuto setting out measurement NA NA 〇 〇

Auto Collimation NA NA 〇 〇Double face

measurement NA NA 〇 〇Mesh

Scanning NA NA 〇 〇Remote catcher NA NA NA 〇

Auto tracking NA NA NA 〇

What you can do with Direct Aiming Station (DS)

ES OS DS PSTS Shield Yes Yes Yes Yes

Fast and Powerful EDM Yes Yes Yes Yes

LongLink Communication Yes Yes Yes Yes

Advanced Angle Accuracy Yes Yes Yes Yes

Super Long Battery Life Yes Yes Yes Yes

Rugged, WaterproofDesign Yes Yes Yes Yes

Laser pointer Yes Yes Yes Yes

Guide lights Yes Yes Yes Yes

USB port Yes Yes Yes Yes

RS-232C connector Yes Yes Yes Yes

Trigger key Yes Yes Yes Yes

Functional Comparison

Let’s achieve our sales target with strategic products

DS seriesTogether!!

Thank you !!

New Direct Aiming Station

Product introduction guideDS

Featuring

1. TS Shield2. Fast and Powerful EDM3. LongLink Communication4. Advanced Angle Accuracy5. Super Long Battery Life6. Rugged, Waterproof Design7. Laser pointer8. Guide lights9. USB port10. RS-232C connector11. Trigger key12. Display

technology

“Quick Collimation” is a function that automatically searches for the center of the target

Topcon calculation technologysupport you “Quick” and “Accurate” field work - More than what human Eyes can do! - Higher Productivity in your job field!

When Auto Pointing is performed, the image sensor on the instruments detects the light beam reflected from the target, the offset between the target and telescope reticle is calculated by image processing, then the angle measurement value obtained from the encoder is compensated.

DS Major Features and Benefits

1. TS Shield

2. Fast and Powerful EDM

3. LongLink Communication

4. Advanced Angle Accuracy

5. Super Long Battery Life

6. Rugged, Waterproof Design

Long Life Battery

Fast and Powerful EDM

Advanced Angle Accuracy

DS Major features

TSshield

Rugged Waterproof design

LongLink TM

Communications1

2

4

3

5

6

Major features - TSshield

World’s first cloud-based total station management system! Tsshield provides reliable security, asset tracking, remote diagnostics and support

1

Major features - Fast and Powerful EDM

2

- Long Distance 1,000m Non-PrismAccuracy 2mm+2ppm

- Quick measurement 0.9sec (fine mode)

- Prism EDM Range :5,000m Accuracy 1.5mm+2ppm

Prism mode Fine mode Rapid mode

Prism (1.5+2ppmxD)mm (5+2ppmxD)mm

Reflector sheet*1 (2+2ppmxD)mm (5+2ppmxD)mm

Non Prism mode Fine mode Rapid mode Distance

Kodak Gray card White side*2

(2+2ppmxD)mm (6+2ppmxD)mm 0.3 – 200m

(5+10ppmxD)mm (8+10ppmxD)mm 200 - 350m

(10+10ppmxD)mm (15+10ppmxD)mm 350 – 500m

Non Prism mode Fine mode Rapid mode Distance

Kodak Gray card Gray side*3

(3+2ppmxD)mm (6+2ppmxD)mm 0.3 – 100m

(5+10ppmxD)mm (8+10ppmxD)mm 100 - 170m

(10+10ppmxD)mm (15+10ppmxD)mm 170 – 220m

*3 Figures when using Kodak Gray Card Gray side (reflection factor 18%) and brightness level is less than 30000 lx (a little cloudy).

*2 Figures when using Kodak Gray Card White side (reflection factor 90%) and brightness level is less than 30000 lx (a little cloudy).

*1 Figures when the laser beam strikes within 30° of the reflective sheet target.

*5 *6 When performing reflectorless measurement, the possible measurement range and precision will change depending on the target reflection factor, weather conditions and location conditions.

Major features - Advanced Angle Accuracy 3

Reliable performance on measuring angle

Since this technology allows the instrument to calibrate its own angle measurement system by itself, we named it the “Independent Angle Calibration System”. (IACS)

This structure requires neither external references nor operator observation, eliminating loss in accuracy due to the problems of external references and variations in operator ability.

Major features - LongLink 4

Exclusive LongLinkTM Communications 300m

When connected with external data collector the LonglinkTM communication provides the power at the remote rod position. The remote operator can record the data for codes and rod heights for as-builts eliminating most common errors. For stakeout the remote operator can view directions required to find the stake point.

Major features - Long Battery Life

Long Life Battery 5 hours> use auto collimation by every 30sec and single measurement at 20degrees

The batteries can be used with our Topcon Hiper II GPS receiver as well as Topcon total station.

6

Major features - Enviromental tough 5

Rugged Waterproof IP65 designProvides protection from the driving rain for all weather as well as dust

DS Features and Benefits

7. Laser pointer

8. Guide lights

9. USB port

10. RS-232C connector

11. Trigger key

12. Large and operability display

Graphic Color Touch TFT 240 x 320 QVGA Display

Trigger key

Guide Light USB Port

Mini USB Interface

RS-232C connector

DS Features and Benefits

8

7 10

11

9

12

Laser pointer

Features - Laser pointer

Provide the remote rod man with direction to approximately find the horizontal line up to 150m without any stress.. This feature is extremely helpful during stakeout to quickly find line without communication with the instrument man or for trying to find the horizontal angle (line) when cutting brush for a traverse line.

Features - Guide light

Easy to get on line without radio or hand signals

7

Laser pointer (Red Coaxial)

A target can be sighted with a red laser beam in dark locations without the use of the telescope

Red coaxial laser pointer is through the scope making indoor measurements very quick or in limited sunlight and short distance can assist the remote rod man.

8

Features - USB port

Features - Quick and easy Trigger Key

Quick and easy Trigger KeyIs located on the right-had side of the total station. This allows the instrument operator to easily and quickly press the Trigger key right from the horizontal tangent to get a measurement.

9

Easy access USB flash drive port

The waterproof door of the DS total station provides protection for a USB hardware thumb drive. An operator can easily import/export data from the office to the field in seconds. Instrument has USB type A and Type B for easy connection to a computer via ActiveSync. 

10

Largest USB stick that can be used is 8GB

RS-232 connectorIs provided for connecting to an older data collector that does not have Bluetooth or to transfer data to a computer.

Features - RS-232C connector 11

Features - Large and operability display

Graphic Color TFT 240 x 320 QVGA Display 26 key keyboard, with 4-way directional arrow key with backlit

12

ES OS DS PSTS Shield

Yes Yes Yes Yes

Fast and Powerful EDMYes Yes Yes Yes

LongLink Communication Yes Yes Yes Yes

Advanced Angle Accuracy Yes Yes Yes Yes

Super Long Battery Life Yes Yes Yes Yes

Rugged, WaterproofDesign Yes Yes Yes Yes

Functional Comparison

Functional Comparison

ES OS DS PSLaser pointer Yes Yes Yes Yes

Guide lightsYes Yes Yes Yes

USB port Yes Yes Yes Yes

RS-232C connector Yes Yes Yes Yes

Trigger key Yes Yes Yes Yes

Motor Settings1. Select “Motor” in <Configuration>

You will see “Configuration”, “Search area” and “JOG setting” tab

Items set and options(1)AUTO AIM: Fine/Rapid(2)Search setting: None/Search(3)Turn: 5”/10”/20”/30”/60”

*Factory setting

<Configuration> tab

(1) AUTO AIMSelect "Rapid" when supporting prism pole by hand.It can be performed even with slight instability of prism position or minor shifts of target position in the field-of-view.

“Fine” is recommended when a high level of measurement accuracy is required.Make sure that the prism is securely mounted on a tripod. When using this setting when supporting the pole by hand,hand movements will result in Auto pointing taking too long to complete and “Time out” error will occur.

(2) Search setting Select “Search” for using Auto collimation function. “None” to switch off Auto Collimation.

(3) TurnTo set a tolerance range for setting accuracy when truing the instrument from the reference Angle to a Specified Angle

Auto Pointing Settings

Items set and options(1)Vertical 0 to 90(2)Horizontal 0 to 180 factory setting vertical 15 Horizontal 15

It is available to set searching area by entering angle unitsUser could set searching area vertically long or horizontally long according to it’s job style.

<Search area> tab

<JOG setting> tab

Items set and options(1) Lo : 1 to 4 (3*) (steps. 4 is fastest)(2) Hi : 1 to 7 (4*) (steps. 7 is fastest)(3) Shift : 1 to 6 (2*) (steps)

*factory setting Press [INIT] to return JOG Setting tab

DS Power Drive Endless Screw has capability of setting High and Low 2 steps shifting speeds.In Addition it is available to change switching point from low speed to High shifting speed.This setting will realize customer friendly operability.