Pnmt Dial up settings

Made By Eng.Faisal Al kathiri

Fsl.kthr@gmail.com

Connect your laptop to NE at LCT port via printer cable

The windows will open as following, choose "No, not this time.

Select Install from a list or specific location [Advanced] and click on [Next].

Select "Include this location in the search" and "Browse" and select the location of file (pncom.sys) and select it, then Next

Click Continue Anyway in the Hardware Installation pop-up alert.

USB Modem Driver Installation starts

USB Com Port Driver installation is complete, press Finish

Click " Start ", " Settings", "Control Panel" and the" Network Connections"

Click Create a new connection

The Welcome to the New Connection Wizard window appears. Click Next

Select Connect to the network at my workplace and click Next to continue.

Select Dial-up connection and click Next to continue

Select Modem USB Modem Driver [COM#] and click Next to continue.

Insert "Pnmt" and press " Next".

Enter any number in the Phone number field and click Next to continue.

Verify that Pnmt is displayed as the connection. You can also create a shortcut on your desktop if desired. Click Finish.

In the Connect Dial-up Connection window, Click Properties

Select Configure

Insert 19200 in maximum speed (bps) , uncheck all five boxes and press ok

From dial-up connection Proprieties select Options, put marks and options as shown on following snapshot

Select Security and select Typical (recommended settings), from Validate my identity as follows select Allow unsecured password

Select Networking, at Type of dial-up server I am calling select PPP:Windows 95/98/NT4/2000,Internet, then at This connection uses the following items: select only Internet Protocol (TCP/IP) and QoS Packet Scheduler.

Select Settings and uncheck all boxes and press Ok

Select Prosperities , select Obtain an IP address automatically and Obtain DNS server address automatically

Select Advanced, uncheck Use IP header compression

Select Advanced , Settings, and Off and Ok

Press Ok and Dial

User name admin, Password admin and press login

The End

For more information contact at :

fsl.kthr@gmail.com