Embed Size (px)
Citation preview
Nc-multi-slides-programmable-CMP350.pdf 05/2014
NC MULTI-SLIDES PROGRAMMABLE
CMP 350
OPTIMIZATION // FLEXIBILITY = FAST PRODUCTION The CMP 350 is complet numerical machine with a high flexibility developped to work the strip asking a big tonnage effort to cut it and bend it. Requiring no change cam, since each slide, feeder, press ejector have their own servo motor, it allows you to change the cam profiles just by programming and then saving time on serial change-over and tooling costs. Moreover Pressmac has innovate with a new Software « OCP » which allow to optimize the cams. His direct connexion between the software and the PLC makes it an easy and efficient tool which allow to obtain gain could be up to 50%.
HIS STRENGTHS: -Time serial change-over less than 1 hour grace to the adjuster slides carriage and NC cams. -No spécific cam for each reference which reduce tooling cost. -A lot of configuration like radial or linear. -HMI use friendly and simple. -Noticeable increase output up to 50%.
Samples:
PRESSMAC 9 rue Lafayette 25000 BESANÇON
TEL. +33(0).81.41.85.70 www.pressmac.com E.MAIL. : [email protected]
NC MULTI-SLIDES
CMP 350
Specifications:
Min Max Standard Option
Speed strk/mn 3 220 Depend application
Drives-motor All numerical NC
Number slides CN on the frame 20
Slide 4 Tons CN Stroke 0 50 mm Linear or radial
Slide 8 Tons CN Stroke 0 60 mm Linear or radial
Angle gear angle 0 -90°/+90°
Double slides 4T Stroke 0 50 mm
Feeder CN Speed
0 str/mn 200 str/mn 1 fixed gripper and 1
mobil gripper Buffer or hy-draulic gripper
0 str/mn 300 str/mn 2 mobil grippers
Press module
Presse excentrique une bielle CN
Speed 3 str/mn 220 str/mn Dynamic force mea-
surement
Force 0 kn 200Kn Stroke 20 or 16 mm
Presse excentrique deux bielles CN
Speed 3 str/mn 220 str/mn Dynamic force mea-
surement
Force 0 kn 400Kn Stroke 20 or 16 mm
Ejector // Conform slide Stroke 0 100mm Ejecteur simple ou double
CN Force 0 120 Dan
Positioning slides Radial By adjust carriage
Linear By adjust carriage
Scrolling direction Right at left Left at right
Total weight 9 Tons depending confi-guration
Dimensions L=3200 x H=2600 x W=800
For additional information on our modules please refer to our other. Pdf or contact the sales department
PRESSMAC 9 rue Lafayette 25000 BESANÇON
TEL. +33(0).81.41.85.70 www.pressmac.com E.MAIL. : [email protected]
Nc-multi-slides-programmable-CMP350.pdf 05/2014
NC MULTI-SLIDES PROGRAMMABLE
CMP 350
PRESSMAC 9 rue Lafayette 25000 BESANÇON
TEL. +33(0).81.41.85.70 www.pressmac.com E.MAIL. : [email protected]
CONFIGURATIONS
His configurations are multiples and necesseraly fit at your production, either linear or radial applications
Radial tool Linear tool Radial tool
Automation: All settings are made using a swivel and handy panel including a large format touch screen, all buttons and remote control security for the manual mode that allows easy among other band introductions. Axis Controller ELAU C600 (Schneider electric). 8 Inputs control are free and configurable with a lot of monitoring mode. 8 Output control are free and configurable with a lot of mode. Watching tonnage slides in static. Watching tonnage press in dynamic Software OCP which allow to optimize the cycle program to be the most efficient possible. Télémaintenance possible by VPN tunnel which could allow to modify or realise a quick diagnostic at distance (safety connexion).
Nc-multi-slides-programmable-CMP350.pdf 05/2014
