Embed Size (px)
Citation preview
Nature to Nature
PTTMCC Facts & Figures
BioPBS™ Life cycle-From nature to nature
Joint venture of PTT Global Chemical& Mitsubishi Chemical Corporation
PTTMCC is dedicated to produce BioPBS™ with
20,000 Tons
annual capacity, plant based in Rayong
Thailand
BioPBS™ (bio-based polybutylene succinate) is revolutionary in its two-fold bio properties. It is both bio-based and biodegradable plastics, naturally decomposes into biomass, CO
2, H
2O
BioPBS™ has been used in wide range applications: Paper coating, Compounding, Synthetic fiber, Flexible and Barrier packaging
BioPBS™ has exclusive license from Mitsubishi Chemical Corporation Patents.
The world’s 1st
biggest BioPBS™ Plant
BioPBS™ is the only bioplastic with revolutionary in its two-fold bio properties. It is both bio-based and biodegradable plastic, derived from corn and transform into BioPBS™ biopolymer which can be applied into various applications.
When end up either in the open-air landfill or marine environment, it will be gradually broken down into small pieces and becomes H2O, CO2, and Biomass to be used for BioPBS™ feedstock again and again.
1,4Butanediol
Bio-Succinic Acid
Your products Polymerization of
H O, CO ,Biomass 2 2
Biobased Biodegradable
Bio-PE
Bio-PET
PBATBio-PP
PLAPHA
Starch
Biodegradable & Biobased
Bioplastics
Biodegradable in controlled (compost facility) or non-controlled conditions (soil, landfill…)
Organic Recycling Concept
* BioPBS-based wastes are not intended to be managed apart from official and agreed waste management streams. They just biodegrade faster (few weeks or months) than conventional plastics (decades or centuries), even at ambient temperature. Composting is thus very appropriate to BioPBS Wastes, including BioPBS-based wastes, must be managed properly and according to local regulations.
Cellulose
Metallized Cellulose
BioPBS™
Barrier packaging
Paper coating
Coffee capsule/Cutlery
Synthetic Fiber
(The best sealant layer)
(The best bioplastic for paper coating)
(Increase impact strength)
(Increase heat stability)
Certified by WMU & PTS
Barrier packaging
Paper coating
Coffee capsule/Cutlery
Synthetic Fiber
Cellulose
Metallized Cellulose
BioPBS™
(The best sealant layer)
(The best bioplastic for paper coating)
(Increase impact strength)
(Increase heat stability)
Applications/Certificates
Processability
Environmentally friendly
Over the last decade, the world’s population has dramatically increased, resulting in enormous quantity of plastic waste going into landfills and ocean. The analysis shows that by 2050* there could be more plastics than fish in the ocean by weight! Consequently, we are here to help you in providing outperform bioplastic which is rapidly compostable without facility. As a result there will be less and less plastic leaks into the ocean.
* J. R. Jambeck et al., Plastic waste inputs from land into the ocean (Science, 13 February 2015).
FCN 1817/1818EU10/2011
JHOSPA
Food Contact
Fast processing(cycle time)
Processability
Repulpable & Recyclable
Sealability
Compatible with
Cellulose & PLAImpact
modifierAdhesion to paper
High Service Temperature Flexibility
Compostable30oCHome compostable Biobased
*PM grades are intended to come into contact with food applications.
PTT MCC BIOCHEM COMPANY LIMITED555/2 Energy Complex Building B, 14th FloorVibhavadi Rangsit Rd., Chatuchak, Bangkok 10900, ThailandTel/Fax: +66 (0) 2140 3555/+66 (0) 2140 3556www.pttmcc.comEmail: [email protected]
Properties Test Method UnitBioPBSTM
FZ71(PM/PB)
FZ91(PM/PB)
FD92(PM/PB)
Density ISO 1183 g/cm3 1.26 1.26 1.24
MFR (190 oC, 2.16 kg) ISO 1133 g/10 min 22 5 4
Melting Point ISO 3146 oC 115 115 84
Yield Stress ISO 527-2 MPa 40 40 17
Stress at Break ISO 527-2 MPa 30 36 24
Strain at Break ISO 527-2 % 170 210 380
Flexural Modulus ISO 178 MPa 630 650 250
Flexural Strength ISO 178 MPa 40 40 18
Izod Impact Strength (23oC) ISO 180 kJ/m2 7 10 47
Heat Deflection Temperature (0.45 MPa) ISO 75-2 oC 95 95 63
Rockwell Hardness ISO 2039-2 R Scale 107 107 56
Remarks Standard grades Flexible grade
E-Brochure
