THERMALPANEL

NATURAL INSULATING PANELNON-FLAMMABLE AND SLIM

EC branding in conformity with EN 13162

Low thickness natural products,100% re-cyclable, respectful of persons and the environment.

Also suitable for finishesof particular architectural value, improving

both winter and summer residential comfort.

Low thickness renovation:Refurbishing buildings has these days become a priority to be carried out both

from the point of view of energy or that of environmental integrity, but only after a

careful analysis is it possible to identify the best technical solutions.

NOBILIUM® THERMALPANEL is a product created to satisfy the many

requirements and expectations of clients wishing to combine the refurbishment

of environments with a tangible energy saving, with low thickness, natural and

environmental friendly technical solutions which make dwellings perform better

from a point of view of energy and noise reduction, as well as being healthier.

Without the option of applying large thicknesses, it is of vital importance to

identify the best products and technical solutions to be applied, while maintaining

performance unaltered over time.

Internal refurbishing requires careful planning and evaluation of the materials and

systems to be adopted which, if underrated may result in undesired results.

These days, the importance of preserving the capacity for absorbing and releasing

environmental humidity without causing deterioration is notable, and the

products of the NOBILIUM® series have been created and perfected to maintain

unaltered this important characteristic.

Each technical NOBILIUM® solution allows walls to remain functional while

interacting with surrounding environmental variations, without creating

conditions of accumulated humidity within, and always maintaining excellent

conditions of transpiration in order to avoid deterioration of the overall insulating

characteristics.

NOBILIUM®THERMALPANEL solutions for historic buildingsNOBILIUM®THERMALPANEL solutions for historic buildings

NOBILIUM®THERMALPANEL solutions for historic buildingsNOBILIUM®THERMALPANEL solutions for historic buildings

NOBILIUM®THERMALPANEL:

The NOBILIUM®THERMALPANEL product is made up of selected inert mineral

� bres, 100% natural, with high transpiration, completely non-combustible,

100% recyclable, with very high density and excellent physical resistance, noise

absorption and thermal conductivity.

NOBILIUM®THERMALPANEL is available in a thickness of 9mm, with a density of

180 Kg/m³, thermal conductivity of 0.032 W/mK and self-supporting.

CONCLUSIONS:

On the basis of calculations set out below, it can be noted how the application

of the NOBILIUM®THERMALPANEL product to the walls indicated, allows for

a notable increase of overall insulating performance, be that in a stationary or

dynamic regime. Test certi� cates issued by noti� ed body No. 2685 pursuant to EU

regulation 305/2011.

ANALYSIS OF THE CONTRIBUTION TOWARDS THE LEVEL OF INSULATION WITHNOBILIUM®THERMALPANEL

Standards Applied UNI EN ISO 6946; UNI EN ISO 13786Variations of values under stationary and dynamic regimes of:

Walling 1* + 9mm NOBILIUM®THERMALPANEL

Walling 1* +18mm NOBILIUM®

THERMALPANEL

Walling 2* +9mm NOBILIUM® THERMALPANEL

Walling 2* +18mm NOBILIUM®

THERMALPANEL

Walling 3* +9mm NOBILIUM® THERMALPANEL

Walling 3* +18mm NOBILIUM®

THERMALPANEL

Thermal transmitt.U (W/m²K)

-48,4% -64,5% -42,0% -58,3% -28,8% -43,9%

Thermal ResistanceR (m²K/W)

+93,8% +181,4% +72,7% +140,0% +40,6% +78,2%

Periodic Thermal transmissionYie (W/m²K)

-77,8% -87,2% -76,4% -86,2% -64,5% -78,5%

Phase shiftHours (h)

9,79 h 10,01 h 14,28 h 14,51 h 11,19 h 11,65 h

Attenuationfd

-56,7% -63,8% -59,4% -67,0% -50,0% -61,7%

*Wall 1 in reinforced 30cm concrete *Wall 2 in 50cm stone*Wall 3 in load bearing 30cm hollow brick

NOBILIUM®THERMALPANEL Vs MINERAL WOOLThe characteristics data of the panels which di�erentiate them from those normally found

commercially in classic mineral wool are as follows:

Technical characteristics NOBILIUM®THERMALPANEL MINERAL WOOL average values

Density 180 Kg/m³ 100 Kg/m³

Resistance to concentrated load 6150 N 200/600 N

Speci�c heat 2100 J/KgK 1000 J/KgK

Resistance to parallel traction of the faces in the thickness sense

1478 kPa 15 kPa

Thickness 9mm and self-supporting Not in existence with such a reduced thickness

Thermal conductivity 0,032 W/mK 0,040 W/mK

Transpire-ability µ 3 Exceptionally transpiring µ 1 Exceptionally transpiring

Combustibility Non-�ammable A1 Non-�ammable A1

Resistance to residual traction after treatment at 200°C (%)

98 95

Resistance to residual traction after treatment at 400°C (%)

85 60

Resistance to residual traction after treatment at 600°C (%)

76 20

Loss of weight due to vibration (v=50 Hz, А=1mm, t=3 hours, %) at 200°C

0 40

Loss of weight due to vibration (v=50 Hz, А=1mm, t=3 hours, %) at 450°C

0,01 75

Loss of weight due to vibration (v=50 Hz, А=1mm, t=3 hours, %) at 900°C

0,35 100

Loss of weight in water (%) 1.6 4.5

Loss of weight in acid environment (%) 2.2 24

Loss of weight in alkaline environment (%) 2.75 6.1

From the summary table shown above, enormous technical di�erences can clearly be noted between some important parameters, amongst which the

speci�c heat and resistance to traction, as well as the very low thermal conductivity at elevated densities, which makes the NOBILIUM®THERMALPANEL

a unique product capable of such characteristics at only 9mm.

CHARACTERISTICS OF THE IDEAL INSULATING PRODUCT

Up to today, the individual characteristics shown below could be found in various products, but never gathered together as the characteristics of a

single product, such as indeed the NOBILIUM®THERMALPANEL

The graph shows the surface temperature of the walls, and of the 9mm and 18mm NOBILIUM®THERMALPANEL panels.

Application; to the left of a 9mm NOBILIUM®THERMALPANEL, to the right of an 18mm, on 30 mm reinforced concrete walling.

Thermographic analysis NOBILIUM®THERMALPANEL

Low thermal conductivity

High density

High speci� c heat

Non-� ammable

High transpiration

Natural product

Easily recyclable

Low thickness

Heightened resistance to traction

Excellent dimensional stability

Ease of laying

Excellent relationship between cost/technical characteristics/

environmental impact/low thickness

Unique 9mm panel with EC branding in conformity with: EN 13162:2012

+ A1: 2015

NOBILIUM®THERMOSILENTThermo-acoustic solution for the framework of walls and wall linings made with dry systems.

The NOBILIUM®Thermosilent product is made in strips with a minimum width of 2cm, a thickness of 9mm and length of 60cm, to enable application

on the metal and/or wooden frames of the plasterboard and/or �breboard support structure, in order to guarantee an excellent thermo-acoustic

separation from the support structure and/or the �ooring/walls.

WITHOUT NOBILIUM®THERMOSILENT WITH NOBILIUM®THERMOSILENT

The NOBILIUM®Thermosilent product is easy to lay in that only the application of strips of double-sided adhesive tape is required at a few points of

the frame; this may also be easily used furthermore for thermo-acoustic insulation of false window and door frames, in addition to those to be a�xed

within window roller blind boxes.

Agosti Nanotherm Srl

S. Giacomo Street, 23 - 39055 Laives (BZ) - Trentino South Tyrol

T. +39 0471 1703516 - F. +39 0471 1703494 - M. +39 335 7794881

www.agostinanotherm.com - info@agostinanotherm.com

ADV

stud

io.it

Registered trademarks: The NOBILIUM® trade mark is the exclusive property of the Agosti Nanotherm SRL company

NOBILIUM®

For excellentrefurbishment on

any of yourhome’s surfaces.

Area distribution: