NATM HITCH / COUPLER WARNING COMBINATION …kennygyl.com/pdf/KennyAndGyl_2010_NATM_Brochure.pdf · attach cable to tow pin in vehicle switch box for towing and storage pin pin pulled

ATTACHCABLETO TOWVEHICLEPIN IN

SWITCH BOXFOR TOWING AND STORAGE

PIN

PIN PULLED OUT, ONLY TO TEST BRAKES

SWITCH BOX

NATM HITCH / COUPLER WARNINGCOMBINATION DECALS

1

KG01

ENOUGHSLACK

FOR TURNS

ATTACH TO TOWVEHICLE STRUCTURE

© 2002 NATM


PINSWITCH BOX

ATTACHCABLETO TOWVEHICLE

PIN INSWITCH BOX FORTOWING ANDSTORAGE

DISCONNECTED CONNECTED

PART # KG01 5.5” X 2.75” ORANGE AND BLACK

Sleeve back

Sleeveforward

Lift Coupler to check

Pin in place

Coupler open

ENOUGHSLACK

FOR TURNS

ATTACH TO TOW VEHICLE FRAME

Trailer can roll if it comes loose.Electric safety brake applies whencable pulls pin out of switch box:

PULL hard to get pin out of switch box.

pin will be pulled out if trailer separates.

1.2. CHECK brake by PULLING TRAILER

with tow vehicle.3. ATTACH pin CABLE to tow vehicle so

4. Promptly REPLACE pin in switch box.


KG02


KG03

Open clamp

Closed clamp

Pin in place

Pin removed


ENOUGHSLACKFOR TURNS

CROSS CHAINS ATTACH CABLETO TOW VEHICLE

PIN


SWITCHBOX PIN IN

SWITCH BOXFOR TOWINGANDSTORAGE



GOOSENECK / ELECTRIC BRAKE

BULLDOG / ELECTRIC BRAKE

PINTLE HOOK / ELECTRIC BRAKE

NATM HITCH / COUPLER WARNINGCOMBINATION DECALS

ENOUGH SLACKFOR TURNS

ATTACH HOOKS TO TOW VEHICLE FRAME

CROSS CHAINS

Openclamp

Lift coupler to check

Closed clamp

Pin or padlockin place

CheckFluidLevel

AttachTo TowVehicle

Break-awayBrake Chain

Trailer can roll if it comes loose. Safetybrake applies when chain pulls brake lever.

1. ATTACH brake CHAIN securely to tow vehicle so lever will be pulled if trailer separates. 2. CHECK brake fluid level. 3. DO NOT TOW trailer if brake fluid is NOT FULL.


KG04


KG05



CROSS CHAINS

Openclamp


Closed clamp


PIN


SWITCH BOX

ATTACHCABLE

TO TOWVEHICLE SWITCH BOX FOR

TOWING ANDSTORAGE

PIN IN

Trailer can roll if it comes loose.Electric safety brake applies whencable pulls pin out of switch box.

Lights can prevent trailer from beinghit by other vehicles. You must:

1. CONNECT trailer and tow vehicle electrical connectors. 2. CHECK all lights: tail lights, turn signal, and brake lights. 3. DO NOT TOW if lights are not working.



1. PULL hard to get pin out of switch box.2. CHECK brake by PULLING TRAILER




Kenny & Gyl Company is a member of NATM and alicensed manufacturer of copyrighted safety decals for theNational Association of Trailer Manufacturers.Use our expertise with the support of NATM tohelp limit your product liability.

2

BUMPER PULL / SURGE BRAKE

BUMPER PULL / ELECTRIC BRAKE

NATM HITCH/COUPLER WARNINGWITH LUG NUT SAFETY

3

Tires and Wheels OK?

Lug NutsTIGHT?

Tire, wheel or lugnut failure can cause loss ofcontrol. Before towing, you must CHECK: 1. Tire pressure and tread. 2. Tires and wheels for damage. 3. Lug nuts for tightness.

For new and remounted wheels, re-tighten lug nuts at the first 10, 25 and 50 miles of driving.

KG06

ENOUGHSLACK

FOR TURNS



PINSWITCH BOX









Lug NutsTIGHT?



KG07

Trailer can roll if it comes loose.Electric safety brake applies whencable pulls pin out of switch box:

PULL hard to get pin out of switch box.


1.2. CHECK brake by PULLING TRAILER




SWITCH BOXFOR TOWING AND STORAGE

PIN


SWITCH BOX

ENOUGHSLACK

FOR TURNS

ATTACH TO TOW VEHICLE FRAMESleeve back

Sleeveforward

Lift Coupler to check

Pin in place

Coupler open

PART # KG07 9” X 2.75” ORANGE AND BLACK





Lug NutsTIGHT?



Open clamp

Closed clamp

Pin in place

Pin removed

ATTACH CABLETO TOW VEHICLE

PIN


SWITCHBOX PIN IN




CROSS CHAINS

KG08


GOOSENECK / ELECTRIC BRAKE

BULLDOG / ELECTRIC BRAKE

PINTLE HOOK / ELECTRIC BRAKE

NATM HITCH/COUPLER WARNINGWITH LUG NUT SAFETY

KG09





Lug NutsTIGHT?



WARNING WARNING WARNING WARNING WARNING



CROSS CHAINS

Openclamp


Closed clamp


CheckFluidLevel

AttachTo TowVehicle






Lug NutsTIGHT?





CROSS CHAINS

Openclamp


Closed clamp


CheckFluidLevel

AttachTo TowVehicle






Lug NutsTIGHT?





CROSS CHAINS

Openclamp


Closed clamp


PIN


SWITCH BOX

ATTACHCABLE


TOWING ANDSTORAGE

PIN IN






KG10

4



BUMPER PULL / SURGE BRAKE

BUMPER PULL / ELECTRIC BRAKE

PART # KG104 12.15” X 3” ORANGE AND BLACK

PART # KG105 16.25” X 3” ORANGE AND BLACK


5

WARNINGTrailer can roll if it comes loose.Electric safety brake applies whencable pulls pin out of switch box:



pin will be pulled out if trailer separates.4. Promptly REPLACE pin in switch box.

© 2002 NATM


SWITCH BOXFOR TOWING ANDSTORAGE T0037

PIN


SWITCH BOX

WARNING

T0036© 2002 NATM

ALWAYS use safety chains.Chains hold trailer if connection fails.You must: 1. CROSS chains underneath coupler. 2. ALLOW slack for trailer to turn. 3. ATTACH chain hooks securely to tow vehicle frame.

ENOUGHSLACK

FOR TURNS


WARNINGLights can prevent trailer from beinghit by other vehicles. You must: 1. CONNECT trailer and tow vehicle electrical connectors. 2. CHECK all lights: tail lights, turn signal, and brake lights. 3. DO NOT TOW if lights are not working.

T0027© 2002 NATM

DISCONNECTED CONNECTED WARNINGImproper loading can cause trailer swayand sudden loss of control. You must: • Make certain weight of load plus trailer weight does not exceed trailer’s capacity (GVWR- Gross Vehicle Weight Rating). • Load heavier items in front of wheels. • Load evenly side to side. • SECURE load to trailer.

T0017© 2002 NATM

Balance loadside to side

Less loadin rear

More load infront of wheels

Secure loadto trailer

WARNING

T0030

Sleeve back

Sleeveforward

Lift Coupler to check© 2002 NATM

Pin in place

Coupler open

Uncoupling will cause trailer to comeloose from tow vehicle. You must: 1. CHECK that ball LOAD RATING is same or greater than coupler LOAD RATING. 2. CHECK that ball SIZE is same as coupler. 3. CLOSE COUPLER CLAMP on ball. 4. LIFT coupler upwards to test that it will not separate from ball. 5. LOCK sleeve with pin or padlock.

WARNING

T0019© 2002 NATMTires and Wheels OK?

Lug NutsTIGHT?



WARNING


Lug NutsTIGHT?



WARNING

T0034© 2002 NATM




CROSS CHAINS

WARNING


PIN


SWITCHBOX PIN IN


Trailer can roll if it comes loose.Electric safety brake applies whencable pulls pin out of switch box: 1. PULL hard to get pin out of switch box. 2. CHECK brake by PULLING TRAILER with tow vehicle. 3. ATTACH pin CABLE to tow vehicle so pin will be pulled out if trailer separates. 4. Promptly REPLACE pin in switch box.

T0035© 2002 NATM


T0027© 2002 NATM

DISCONNECTED CONNECTEDWARNINGImproper loading can cause trailer swayand sudden loss of control. You must: • Make certain weight of load plus trailer weight does not exceed trailer’s capacity (GVWR- Gross Vehicle Weight Rating). • Load heavier items in front of wheels. • Load evenly side to side. • SECURE load to trailer.

T0017© 2002 NATM


Less loadin rear



WARNINGUncoupling will cause trailer to comeloose from tow vehicle.

1. CHECK that pintle LOAD RATING is same or greater than ring LOAD RATING. 2. LOCK the clamp in place using a pin or lock.

T0029

Open clamp

Closed clamp© 2002 NATM

Pin in place

Pin removed

WARNING CHECKBEFORE TOWING!

WARNING

© 2002 NATM T0024

Improper loading can cause trailer swayand sudden loss of control. You must: • Make certain weight of load plus trailer weight does not exceed trailer’s capacity (GVWR- Gross Vehicle Weight Rating). • Load heavier items in front of wheels. • Load evenly side to side. • SECURE load to trailer. • Close and PIN or LOCK doors.


Less loadin rear


WARNINGTrailer can roll if it comes loose.Electric safety brake applies whencable pulls pin out of switch box: 1. PULL hard to get pin out of switch box. 2. CHECK brake by PULLING TRAILER with tow vehicle. 3. ATTACH pin CABLE to tow vehicle so pin will be pulled out if trailer separates. 4. Promptly REPLACE pin in switch box.© 2002 NATM


T0015

PINSWITCH BOX




T0027© 2002 NATM


WARNING

T0021© 2002 NATM

ENOUGHSLACK

FOR TURNS

ATTACH TO TOWVEHICLE STRUCTURE WARNING


Lug NutsTIGHT?



WARNINGUncoupling will cause trailer to comeloose from tow vehicle. You must:

1. CHECK that ball LOAD RATING is same as or greater than coupler LOAD RATING. 2. CHECK that ball SIZE is same as coupler. 3. CLOSE COUPLER CLAMP on ball. 4. LIFT coupler upwards to test that it will not separate from ball. 5. LOCK coupler clamp with pin or padlock.

NATM SAFETY COMBINATION DECALS(ONE PART COVERS ALL SAFETY APPLICATIONS)

BULLDOG HITCH / COMBINATION

PINTLE HOOK / COMBINATION

GOOSENECK / COMBINATION

NATM SAFETY COMBINATION DECALS(ONE PART COVERS ALL SAFETY APPLICATIONS)



6

Improper loading can cause trailer swayand sudden loss of control. You must: • Make certain weight of load plus trailer weight does not exceed trailer’s capacity (GVWR- Gross Vehicle Weight Rating). • Load heavier items in front of wheels. • Load evenly side to side. • SECURE load to trailer.

T0017© 2002 NATM


Less loadin rear


Secure loadto trailerWARNING

WARNING

T0020



CROSS CHAINS



T0016

Openclamp


Closed clamp


©2002 NATM


T0026© 2002 NATM


WARNING


Lug NutsTIGHT?




T0014

PIN


SWITCH BOX





ATTACHCABLE


TOWING ANDSTORAGE

PIN IN

© 2002 NATM

WARNING

Uncoupling will cause trailer to comeloose from tow vehicle.


T0029

Open clamp


Pin in place

Pin removed

WARNING

WARNING

T0034© 2002 NATM




CROSS CHAINS

WARNING


Lug NutsTIGHT?



WARNING


PIN


SWITCHBOX PIN IN



T0035© 2002 NATM

Combinations shown are standard items. You may create yourown combination by selecting specific individual labels frompages 7 and 8 and combining them into the set sizes shown tomeet your specific equipment requirements.

There is NO CHARGE for group changes to meet yourspecific requirements.

BUMPER PULL / COMBINATION

PINTLE HOOK / COMBINATION

NATM SAFETY WARNING DECALS

7

PART # T00146” X 2.25”ORANGE / BLACK


T0014

PIN


SWITCH BOX





ATTACHCABLE


TOWING ANDSTORAGE

PIN IN

© 2002 NATM

WARNING WARNINGTrailer can roll if it comes loose.Electric safety brake applies whencable pulls pin out of switch box: 1. PULL hard to get pin out of switch box. 2. CHECK brake by PULLING TRAILER with tow vehicle. 3. ATTACH pin CABLE to tow vehicle so pin will be pulled out if trailer separates. 4. Promptly REPLACE pin in switch box.© 2002 NATM


T0015

PINSWITCH BOX



WARNINGImproper loading can cause trailer swayand sudden loss of control. You must: • Make certain weight of load plus trailer weight does not exceed trailer’s capacity (GVWR- Gross Vehicle Weight Rating). • Load heavier items in front of wheels. • Load evenly side to side. • SECURE load to trailer.

T0017© 2002 NATM


Less loadin rear








T0016

Openclamp


Closed clamp


©2002 NATM




WARNING


Lug NutsTIGHT?



WARNING

T0020



CROSS CHAINS

WARNING

© 2002 NATM T0024

Improper loading can cause trailer swayand sudden loss of control. You must: • Make certain weight of load plus trailer weight does not exceed trailer’s capacity (GVWR- Gross Vehicle Weight Rating). • Load heavier items in front of wheels. • Load evenly side to side. • SECURE load to trailer. • Close and PIN or LOCK doors.


Less loadin rear


WARNING

T0021© 2002 NATM

ENOUGHSLACK

FOR TURNS



NATM SAFETY WARNING DECALS

8





T0027© 2002 NATM


WARNING CheckFluidLevel

AttachTo TowVehicle


Trailer can roll if it comes loose. Safetybrake applies when chain pulls brake lever. 1. ATTACH brake CHAIN securely to tow vehicle so lever will be pulled if trailer separates. 2. CHECK brake fluid level. 3. DO NOT TOW trailer if brake fluid is NOT FULL.© 2002 NATM T0028

WARNINGUncoupling will cause trailer to comeloose from tow vehicle.


T0029

Open clamp


Pin in place

Pin removed


T0026© 2002 NATM






WARNING

T0034© 2002 NATM




CROSS CHAINS

WARNING


PIN


SWITCHBOX PIN IN



T0035© 2002 NATM

WARNING

T0036© 2002 NATM


ENOUGHSLACK

FOR TURNS



WARNING

T0030

Sleeve back

Sleeveforward

Lift Coupler to check© 2002 NATM

Pin in place

Coupler open

Uncoupling will cause trailer to comeloose from tow vehicle. You must: 1. CHECK that ball LOAD RATING is same or greater than coupler LOAD RATING. 2. CHECK that ball SIZE is same as coupler. 3. CLOSE COUPLER CLAMP on ball. 4. LIFT coupler upwards to test that it will not separate from ball. 5. LOCK sleeve with pin or padlock.


WARNINGTrailer can roll if it comes loose.Electric safety brake applies whencable pulls pin out of switch box:



pin will be pulled out if trailer separates.4. Promptly REPLACE pin in switch box.

© 2002 NATM


SWITCH BOXFOR TOWING ANDSTORAGE T0037

PIN


SWITCH BOX

9

TRI-SAFETY COMBINATION DECALS

PART # KG109 8” X 4” RED AND BLACK

DUMP TRAILER DANGER


CHECK LIST WARNING

AVOID SERIOUS INJURY OR DEATH

Do not place body partsbetween trailer body andframe without service polein upright position.

DANGER

KENNY & GYL STOCK SAFETY DECALSANSI FORMATTED

PART # KG103 10.625” X 2” RED YELLOW ORANGE AND BLACK

WARNINGCAUTIONSERIOUS INJURY AND/ORPROPERTY DAMAGE CANRESULT IF THIS VEHICLE

IS TOWED BEFOREFAMILIARIZING YOURSELF

WITH THE MANUFACTURER’SOPERATING INSTRUCTIONS

AND CAUTIONS LISTEDTO THE RIGHT.

DANGER

WARNINGCheck following points each time before towing trailer.

DANGER CAUTION WARNING

KG11

PART # KG11 8.5” X 2” RED YELLOW ORANGE AND BLACK

BALL WARNING DECALS

PART # KG1002.25” X 2.25”ORANGE AND BLACK



10

WEIGHT CAUTION

PART # KG112 4.877” X 2.85” YELLOW AND BLACK

CAUTION

SECURE DOOR/GATE CAUTION

NO STEP

PART # KG1132.25” X 2.00”YELLOW AND BLACK

PART # KG114 4” X 1.125” BLACK

DO NOT EXCEEDMANUFACTURER’S VEHICLE

WEIGHT RATINGS OR LOADINGRECOMMENDATIONS -- GROSSVEHICLE, GROSS AXLE, GROSSCOMBINED VEHICLE AND AXLE.

CAUTION

11

LOAD/UNLOAD WARNING

PART # KG1154.625” X 2.00” ORANGE AND BLACK

PART # KG1163.875” X 1.875” RED AND BLACK

WARNING

DANGER

HEAVY DOOR DANGER

CAUTION

PINCH POINT CAUTION

PART # KG1173.875” X 1.875” YELLOW AND BLACK

12

LATCH GATES/SECURE LOAD CAUTION

PART # KG1184.88” X 2.85”YELLOW AND BLACK

CAUTIONPART# KG1194.88” X 2.85”YELLOW AND BLACK

LOW CLEARANCE WARNING


WARNING

13

WHEEL LUGS & TIRE PRESSURE CAUTION

14

Laser imprintable for all optional specifications.(Instructions and computer template provided)

Pre-printed.All specifications pre-printed and ready to apply.

(custom for your trailer style)

PART # KG-123.12” X 1.55”RED, YELLOWAND BLACK

PRINTED ON 8.5” X 11’ SHEETS OF 10

PART # KG-133.5” X 1.75”RED, YELLOWAND BLACK

KG122 CLEAR OVERLAY AVAILABLE

PART # KG1112" X 2.25"RED AND BLUE

15

OVERLOAD HAZARD

+

=

PART # KG123 4.0" X 1.875" ORANGE AND BLACK


OVERLOAD HAZARD WARNING

OVERLOAD HAZARD WARNING

MADE IN USA DECAL

PART # KG128 3" X 3.5"RED AND BLUE


16

PART # KG125 1" X 3" YELLOW AND BLACK

PART # KG126 4.12" X 2.9" RED AND BLACK

CAUTION: SLIPPERY WHEN WET

CARBON MONOXIDE DANGER

WHEEL SEPARATION WARNING

We DESIGN and MANUFACTURE:

•LOGOS

•CUSTOM SAFETY DECALS

•PRESPACED VINYL LETTERING

•INFORMATION DECALS

•INJECTION MOLDEDNAMEPLATES

CONTACT SALES AT Kenny & Gyl Company515-225-7007515-225-3042 [email protected]

Terms of sale: Net 30 days, FOB Des Moines, Iowa. Prices subject to change without notice or obligation.

As a NATM Member all of the design serviceis supplied to your company AT NO CHARGE!

Documents

NATM HITCH / COUPLER WARNING COMBINATION …kennygyl.com/pdf/KennyAndGyl_2010_NATM_Brochure.pdf · attach cable to tow pin in vehicle switch box for towing and storage pin pin pulled