National Accreditation Board for Testing and Calibration ...revacalibration.com/download/Scope Mechanical Testing.pdf · JAYASREE REVA PHOENIX METROLOGY PRIVATE LIMITED REVA COMPLEX,

National Accreditation Board for Testing and Calibration Laboratories

(A Constituent Board of Quality Council of India)

NABL / T-4006 02.03.2020

JAYASREE MANIKANDANJAYASREE REVA PHOENIX METROLOGY PRIVATE LIMITEDREVA COMPLEX, NO.14, 4TH STREET,RAJARAJESWARI NAGAR, MADIPAKKAM,CHENNAICHENNAI,TAMIL NADU-600091Mobile: 9940348159E-mail: [email protected]

Subject: Renewal of accreditation

Dear Sir/Ma'am,

NABL is pleased to inform you renewal of accreditation in accordance with ISO/IEC 17025:2017 in the discipline of Mechanical testing asper the scope recommended by the assessment team.

However lab is advised to participate in PT/ILC in impact testing particularly in subzero temperature .

Accreditation certificate no. TC-6977 for Mechanical testing with issue date 05.03.2020 valid till 04.03.2022 will be sent to you soon.

Being an accredited laboratory of NABL , you must fulfill all the terms and conditions laid down in our document NABL-131. You are requested tofollow NABL 133 ( Current Issue) for using NABL symbol.

Yours faithfully,Kanhav [email protected]

NABL House, Plot 45, Sector 44, Gurugram 122 002, Haryana, IndiaTel. No.: +91-124-4679700 (30 lines) * Fax: +91-124-4679799 * Website: www.nabl-india.org

S.No Discipline / Group Product / Material ofTest

Specific TestPerformed

Test MethodSpecificationagainst which testsare performed

Range of Testing/Limits of Detection

Permanent Facility

1 MECHANICAL-MECHANICALPROPERTIES OFMETALS

High Strengthdeformed steel bars

Re-Bend Test IS 1786: 2008 Qualitative(Mandreldia. 10, 12, 16, 25, 32,40, 45, 50, 75 and 100mm.)


Metallic materials % Elongation ASTM E8/E8M: 2016a 1 % to 80 %


Metallic materials % Elongation IS 1608 (Part 01): 2018 1 % to 80 %


Metallic materials % Elongation ISO 6892 (Part 01):2016

1 % to 80 %


Metallic materials % Elongation ASTM E8/E8M: 2016 1 % to 80 %


Metallic materials % Elongation ISO 6892 (Part 01):2016

1 % to 80 %


Metallic materials % Elongation IS 1608 (Part 01): 2018 1 % to 80 %

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name JAYASREE REVA PHOENIX METROLOGY PRIVATE LIMITED, REVA COMPLEX,NO.14, 4TH STREET, RAJARAJESWARI NAGAR, MADIPAKKAM, CHENNAI,KANCHIPURAM, TAMIL NADU , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-6977 Page No. : 1 / 18

Validity 22/07/2019 to 04/03/2020 Last Amended on -






Metallic materials % Offset Proof Stress ASTM E8/E8M: 2016 20 kN to 600 kN


Metallic materials % Offset Proof Stress ISO 6892 (Part 01):2016

6 kN to 600 kN


Metallic materials % Offset Proof Stress IS 1608 (Part 01): 2018 6 kN to 600 kN


Metallic materials % Offset Proof Stress ASTM E8/E8M: 2016 20 kN to 600 kN


Metallic materials % Offset Proof Stress IS 1608 (Part 01): 2018 6 kN to 600 kN


Metallic materials % Offset Proof Stress ISO 6892 (Part 01):2016

6 kN to 600 kN


Metallic materials % Reduction in Area ASTM E8/E8M: 2016a 10 % to 80 %











Metallic materials % Reduction in Area ISO 6892 (Part 01):2016

10 % to 80 %


Metallic materials % Reduction in area IS 1608 (Part 01): 2018 10 % to 80 %


Metallic materials % Reduction in Area ISO 6892 (part 01):2016

10 % to 80 %


Metallic materials % Reduction in Area IS 1608 (Part 01): 2018 10 % to 80 %


Metallic materials % Reduction in Area ASTM E8/E8M: 2016 10 % to 80 %


Metallic materials Bend Test IS 1599: 2012 Qualitative(Mandreldia. 10, 12, 16, 25, 32,40, 45, 50, 75 and 100mm.)


Metallic Materials Bend Test IS 1599: 2012 Qualitative(Mandreldia. 10, 12, 16, 25, 32,40, 45, 50, 75 and 100mm.)











Metallic materials Brinell Hardness -HBW 10/3000

ISO 6506-1: 2014 100 HBW 10/3000 to600 HBW 10/3000



ASTM E10: 2018 100 HBW 10/3000 to600 HBW 10/3000



IS 1500 (Part 01): 2013 100 HBW 10/3000 to600 HBW 10/3000



IS 1500 (Part 01): 2013 100 HBW 5/750 to 600HBW 5/750



ASTM E10: 2018 100 HBW 5/750 to 600HBW 5/750



ISO 6506-1: 2014 100 HBW 5/750 to 600HBW 5/750


Metallic materials Brinell Hardness -HBW10/3000

ISO 6506-1: 2014 100 HBW10/3000 to600 HBW10/3000












ASTM E10: 2018 100 HBW10/3000 to600 HBW10/3000



IS 1500 (Part 01): 2013 100 HBW10/3000 to600 HBW10/3000



ISO 6506-1: 2014 100 HBW 5/750 to 600HBW 5/750



IS 1500 (Part 01): 2013 100 HBW 5/750 to 600HBW 5/750



ASTM E10: 2018 100 HBW 5/750 to 600HBW 5/750


Metallic materials Charpy Impact(Ambient to -50 and -196 °C)

ASTM E23: 2018 12.5 J to 240 J


Metallic materials Charpy Impact(Ambient to -50 and -196 °C)

ASTM E23: 2018 12.5 J to 240 J











Metallic materials Micro VickersHardness - (HV 0.3)

IS 1501 (Part 01): 2013 100 HV 0.3 to 1000 HV0.3



ASTM E384: 2017 100 HV 0.3 to 1000 HV0.3



ISO 6507 -1: 2018 100 HV 0.3 to 1000 HV0.3



ISO 6507-1: 2018 100 HV 0 5 to 1000 HV0 5


Metallic materials Micro VickersHardness - (HV0. 5)

ASTM E384: 2017 100 HV 0.5 to 1000 HV0.5


Metallic materials Micro VickersHardness - (HV0. 5)

IS 1501 (Part 01): 2013 100 HV 0.5 to 1000 HV0.5


Metallic materials Micro VickersHardness - HV0. 3

ISO 6507-1: 2018 100 HV 0.3 to 1000 HV0.3












ASTM E384: 2017 100 HV 0.3 to 1000 HV0.3



IS 1501 (Part 01): 2013 100 HV 0.3 to 1000 HV0.3



IS 1501 (Part 01): 2013 100 HV 0.5 to 1000 HV0.5



ASTM E384: 2017 100 HV 0.5 to 1000 HV0.5



ISO 6507-1: 2018 100 HV 0.5 to 1000 HV0.5


Metallic materials Micro VickersHardness - HV1

ASTM E384: 2017 100 HV1 to 1000 HV1



ISO 6507-1: 2018 100 HV1 to 1000 HV1












IS 1501 (Part 01): 2013 100 HV 1 to 1000 HV 1



ISO 6507: 2018 100 100 HV1 to 1000100 HV1



IS 1501 (Part 01): 2013 100 HV1 to 1000 HV1



ASTM E384: 2017 100 HV1 to 1000 HV1


Metallic materials Rockwell Hardness -HRA

ISO 6508-1: 2016 20 HRA to 88 HRA



ASTM E18: 2019 20 HRA to 88 HRA



IS 1586 (Part 01): 2018 20 HRA to 88 HRA












IS 1586 (Part 01): 2018 20 HRA to 88 HRA



ASTM E18: 2019 20 HRA to 88 HRA



ISO 6508-01: 2016 20 HRA to 88 HRA


Metallic materials Rockwell Hardness -HRBW

IS 1586 (Part 01): 2018 30 HRBW to 100HRBW



ISO 6508-1: 2016 30 HRBW to 100HRBW



ASTM E18: 2019 30 HRBW to 100HRBW



IS 1586 (Part 01): 2018 30 HRBW to 100HRBW












ASTM E18: 2019 30 HRBW to 100HRBW



ISO 6508 (part 01):2016

30 HRBW to 100HRBW


Metallic materials Rockwell Hardness -HRC

IS 1586 (Part 01): 2018 20 HRC to 70 HRC



ASTM E18: 2019 20 HRC to 70 HRC



ISO 6508-01: 2016 20 HRC to 70 HRC



ISO 6508-01: 2016 20 HRC to 70 HRC



ASTM E18: 2019 20 HRC to 70 HRC












IS 1586 (part 01): 2018 20 HRC to 70 HRC


Metallic materials Ultimate TensileStrength

IS 1608 (Part 01): 2018 6 kN to 600 kN



ISO 6892 (Part 01):2016

6 kN to 600 kN



ASTM E8/E8M: 2016 20 kN to 600 kN



ISO 6892 (Part 01):2016

6 kN to 600 kN



IS 1608 (Part 01): 2018 6 kN to 600 kN



ASTM E8/E8M: 2016 20 kN to 600 kN











Metallic materials Vickers Hardness -HV10

ASTM E92: 2017 100 HV10 to 800 HV10



IS 1501 (Part 01): 2013 100 HV10 kg to 800HV10



ISO 6507-1: 2018 100 HV10 to 800 HV10



ASTM E92: 2017 100 HV10 to 800 HV10



ISO 6507-1: 2018 100 HV10 to 800 HV10



IS 1501 (Part 01): 2013 100 HV10 to 800 HV10



ASTM E92: 2017 100 HV30 to 800 HV30












ISO 6507-1: 2018 100 HV30 to 800 HV30



IS 1501 (Part 01): 2013 100 HV30 to 800 HV30



ASTM E92: 2017 100 HV30 to 800 HV30



IS 1501 (Part 01): 2013 100 HV30 to 800 HV30



ISO 6507-1: 2018 100 HV30 to 800 HV30


Metallic materials Yield Strength ASTM E8/E8M: 2016 20 kN to 600 kN


Metallic materials Yield Stress ISO 6892 (Part 01):2016

6 kN to 600 kN











Metallic materials Yield Stress IS 1608 (Part 01): 2018 6 kN to 600 kN


Metallic materials Yield Stress ASTM E8/E8M: 2016 6 kN to 600 kN


Metallic materials Yield Stress IS 1608 (Part 01): 2018 6 kN to 600 kN


Metallic materials Yield Stress ISO 6892 (Part 01):2016

6 kN to 600 kN


Steel Pipes & Tubes Crush Test ASTM A370: 2018 Qualitative(VisualExamination of Crack)


Steel Pipes & Tubes Flattening Test ASTM A370: 2018 Qualitative(VisualExamination for Crack)


Steel Tubes Flaring Test ASTM A370: 2018 Qualitative(Cone angle60 deg.)











Steel, Stainless Steeland Related Alloys

% Elongation ASTM A370: 2018 1 % to 80 %



% Offset Proof Stress ASTM A370: 2018 20 kN to 600 kN



% Reduction in Area ASTM A370: 2018 10 % to 80 %



% Reduction in Area ASTM A370: 2018 10 % to 80 %



Bend Test ASTM A370: 2018 Qualitative(Mandreldia. 10, 12, 16, 25, 32,40, 45, 50, 75 and 100mm.)



Bend Test ASTM A370: 2018 Qualitative(Mandreldia. 10, 12, 16, 25, 32,40, 45, 50, 75 and 100mm.)



Charpy Impact(Ambient to -46 and -196 °C)

ASTM A370: 2018 12.5 J to 240 J













ASTM A370: 2018 12.5 J to 240 J




ASTM A370: 2018 12.5 J to 2400 J



Rockwell Hardness -HRA

ASTM A370: 2018 20 HRA to 88 HRA



Rockwell Hardness -HRBW

ASTM A370: 2018 30 HRBW to 100HRBW



Rockwell Hardness -HRC

ASTM A370: 2018 20 HRC to 70 HRC



Ultimate TensileStrength

ASTM A370: 2018 20 kN to 600 kN



Ultimate TensileStrength

ASTM A370: 2018 20 kN to 600 kN












Yield Stress ASTM A370: 2018 20 kN to 600 kN


Tubes Drift Expansion Test IS 2335: 2005 Qualitative(Cone angle30, 45 and 60 deg)


Weld in metals Bend Test - Face /Root / Side Bend

ASME SEC IX: 2017 Qualitative(Mandreldia. 10, 12, 16, 25, 32,40, 45, 50, 75 and 100mm.)


Weld in metals Bend Test - Face /Root / Side Bend

BS EN ISO 5173: 2011 Qualitative(Mandreldia. 10, 12, 16, 25, 32,40, 45, 50, 75 and 100mm.)


Weld in metals Bend Test -Face/Root/Side Bend

ISO 5173: 2009 Qualitative(Mandreldia. 10, 12, 16, 25, 32,40, 45, 50, 75 and 100mm.)


Weld in metals Fracture Test ASME SEC IX: 2017 Qualitative


Weld in metals Fracture Test AWS D1.1: 2015 Qualitative











Weld in metals Ultimate TensileStrength

ISO 4136: 2012 6 kN to 600 kN



ASME (Sec IX): 2017 20 kN to 600 kN



AWS D1.1/D1.1M:2015

6 kN to 600 kN






Documents

National Accreditation Board for Testing and Calibration ...revacalibration.com/download/Scope Mechanical Testing.pdf · JAYASREE REVA PHOENIX METROLOGY PRIVATE LIMITED REVA COMPLEX,