AutoCADNaredbe:

line, circle, rectangle, array, mirror, hatch

Armando Slaviček

Armando Slaviček 2

Nacrtaj zadani primjer.

Armando Slaviček 3

Command: RECTANGLESpecify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]:Specify other corner point or [Area/Dimensions/Rotation]: @100,100

Command: CIRCLESpecify center point for circle or [3P/2P/Ttr (tan tan radius)]:Specify radius of circle or [Diameter] <10.0000>:

Rectangle Circle

Armando Slaviček 4

Line

Command: LINE

Specify first point: tantoSpecify next point or [Undo]: tantoSpecify next point or [Undo]:

Armando Slaviček 5

Hatch

Armando Slaviček 6

ARRAY - ARRAYCLASSIC

Armando Slaviček 7

Rectangular Array

Armando Slaviček 8

Polar Array

ARRAY - ARRAYCLASSIC

Armando Slaviček 9

ARRAY - ARRAYCLASSICPolar Array

Armando Slaviček 10

ARRAY - ARRAYCLASSICPolar Array

Armando Slaviček 11

ARRAY

Command: ARRAYSelect objects: Specify opposite corner: 20 foundSelect objects:Enter array type [Rectangular/PAth/POlar] <Rectangular>: paType = Path Associative = YesSelect path curve:Select grip to edit array or [ASsociative/Method/Base point/Tangent direction/Items/Rows/Levels/Align items/Z direction/eXit]<eXit>: iSpecify the distance between items along path or [Expression] <150>: 120Maximum items = 15Specify number of items or [Fill entire path/Expression] <15>:Select grip to edit array or [ASsociative/Method/Base point/Tangent direction/Items/Rows/Levels/Align items/Z direction/eXit]<eXit>:

Path Array

Armando Slaviček 12

ARRAYPath Array

Command: SPIRAL

MIRROR

Armando Slaviček 13

Zadatak 1. Zadatak 2.

RECTANGLECommand: RECTANGLE

Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]:

Specify other corner point or [Area/Dimensions/Rotation]: @10,10

Armando Slaviček 14

Armando Slaviček 15

MIRROR