Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
Press Release
Kitchen accessoires
World first: COMPAIR® STEEL flow – metal air duct system Non-flammable, extremely sturdy and fully compatible, the new metal air
duct system from the world market leader Naber opens up entirely new
planning variants for extractor hoods.
With the new metal ducts, Naber meets the globally increasing demand for non-
flammable technical building equipment. The system, which is available in the
usual 150 mm dimensions as a flat duct (222 x 89 mm) and round duct, meets the
highest demands when it comes to tightness due to the all-round lip seals which
are integrated into the system components. The assembly is just as simple as with
COMPAIR® flow (plastic ducts). COMPAIR® STEEL flow is fully recyclable and
therefore particularly sustainable.
New installation variants through high point loadability
Thanks to the galvanized, 0.6 to 0.8 mm thick steel plate and the specially
designed cross-section, COMPAIR® STEEL flow is particularly sturdy. The flat duct
with its variably integrated centre bar has a permissible point load of 100
kilograms. This makes additional, exciting installation variants possible. For
example, laying in floor structures of concrete or wet fill. For multi-storey buildings,
this means that the exhaust air duct can be laid in the floor structure of the floor
above. Also for downdraft systems in kitchen islands, the best possible exhaust air
solutions in terms of technology and design are made possible if the duct is
invisibly routed below the flooring. Of course, all the familiar duct routing scenarios
are also possible: concealed on top of kitchen elements, in the base area and in
suspended ceilings.
Lowest pressure losses
COMPAIR® STEEL flow achieves the same perfect flow results as the proven
COMPAIR® flow and COMPAIR® bion air duct systems from Naber. The guide
elements integrated into the round bends provide for aerodynamically optimal flow
and 80% lower pressure losses than with standard ducts. Thanks to the high
Press release and photos for standard use. For further information please contact: Naber GmbH, Susanne Osewold – Marketing, Enschedestr. 24, 48529 Nordhorn, Tel.: +49 5921 704-229, Fax: +49 5921 704-158, Internet: www.naber.com, E-Mail: [email protected]
Management Hans-Joachim Naber is the tireless driving force behind the development and realisation of innovative products. Ingrid Naber unerringly controls the areas human resources, organisation and finance. Lasse Naber shapes the future direction of the company with drive and vitality.
Naber GmbH A dynamically growing company within the kitchen accessories sector. More than 3,200 accessories items belong to the product range. Numerous internationally recognised design awards underline the innovative power of the family-owned business which is successful for decades.
volume flow, all types of extractor hood thus optimally take in the vapours, also at
low, and thus quiet, power settings. And, with an airflow of up to 650 m³/h, high-
performance extractors and hoods deliver their promised performance in their
installed state and not just on paper.
100 percent compatible
The COMPAIR® STEEL flow programme consists of 33 components, with which
any planning requirements can be efficiently implemented. The system is
compatible with all the vapour extraction systems available on the world market,
including downdraft, as well as with the COMPAIR® duct systems in plastic and the
energy-efficient Naber wall conducts. The assembly is simple, and is completed in
a matter of minutes. The components are available separately and can be ordered
at any time around the clock in a few weeks at www.naber.com.