Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
Mytec 01
Roller Blind
Mytec 01
Two standard systems are available: Mytec 01 Loop, the Chain Drive System with a spring assist mechanism, and Mytec 01, the Spring Drive System with a speed control mechanism.
A variety of optional parts: Top Box type, Side Frame type, Guide Wire type, Link type and Double type.
The Speed Controller installed in the Spring Drive System, Mytec 01 prevents the blind from going up rapidly.
201408E
Oct. 2012RENEWAL
Product Name Product CodeTop BoxType
Guide WireType
Double TypeLink Type
Link Double Type
30000134
30000137
30000136
30000135
30000138
30000141
30000140
30000139
30003516
30003517
30003518
30003519
30003520
30003521
30003522
30003523
30000129
30000126
30000127
30000128
30000133
30000130
30000131
30000132
Double Bracket Plate
Double Bracket SP Side Mount
Double Bracket Chain Side Mount
White
Warm White
Gray
Black
White
Warm White
Gray
Black
White
Warm White
Gray
Black
White
Warm White
Gray
Black
Right
Left
*Use with Double Bracket Plate
*Use with Double Bracket Plate
Link Bracket White
Warm White
Gray
Black
White
Warm White
Gray
Black
M
S
Side FrameType
Link Double Bracket
Link Joint Pipe End
Link Joint Pin
White
Warm White
Gray
Black
30000142
30000125
30000113
30000116
30000114
30000115
* For Mytec 01 Loop only.
Left Operation
Right Operation
Left Operation
Right Operation* *
* *
40
2 3
Mytec 01 Loop incorporates the spring assisted mechanism in its Chain Drive System and Mytec 01 equips the Speed Controller with its Spring Drive System. These two systems enable light and smooth operation of the blind.
Light and smooth operation.
Mytec 01 slowly moves up at a constant speed because the Speed Controller prevents its rapid uplift.
Discomfort noise of collision between the Set Bar or window frame and the Weight Bar can be avoided also.
The Speed Controller installed in the Spring Drive System, Mytec 01 prevents the blind from going up rapidly.
Both Mytec 01 Loop and Mytec 01 can meet various needs of installation sites through attaching various optional parts to the standard products.Especially Mytec 01 has high versatility.
A variety of optional parts responds to a wide range of use.
Key parts including Roller Pipe and Weight Bar can be commonly used for all types of the products. It, therefore, realizes high working efficiency during assembly and decrease of inventory risk.
Most parts can be commonly used, resulting in decrease of inventory.
Chain Drive SystemThe spring assisted mechanism allows you to operate the blind with ease even for a large or tall windows.
Just pull down the pull ball or the pull grip, and the blind stops at anywhere you want. To raise the screen, pull the pull ball or the pull grip just a little. The blind rolls up at the same speed without acceleration.
Spring Drive System
Gentle and smooth roll-up.
Stops calmly. Colliding sound.
Too quick and rough roll-up.
The color variation of the Side Holder.
Mytec 01 Ordinary Roller Blinds Mytec 01 Ordinary Roller Blinds
Side Bracket Type Set Bar Type Side Bracket Type Set Bar Type
White Warm white Gray Black
Mytec 01 Mytec 01
Mytec 01’s Unique Features
Mytec 01 Loop
Mytec 01
Mytec 01 Loop (Chain Drive System) Mytec 01 (Spring Drive System)
Standard
Option
Top Box Type
Side Frame Type
Top Box + Side Frame Type
Guide Wire Type
Top Box + Guide Wire Type
Link Type
Double Type
Link Double Type
*Side Bracket type only
2 3
Mytec 01 Loop incorporates the spring assisted mechanism in its Chain Drive System and Mytec 01 equips the Speed Controller with its Spring Drive System. These two systems enable light and smooth operation of the blind.
Light and smooth operation.
Mytec 01 slowly moves up at a constant speed because the Speed Controller prevents its rapid uplift.
Discomfort noise of collision between the Set Bar or window frame and the Weight Bar can be avoided also.
The Speed Controller installed in the Spring Drive System, Mytec 01 prevents the blind from going up rapidly.
Both Mytec 01 Loop and Mytec 01 can meet various needs of installation sites through attaching various optional parts to the standard products.Especially Mytec 01 has high versatility.
A variety of optional parts responds to a wide range of use.
Key parts including Roller Pipe and Weight Bar can be commonly used for all types of the products. It, therefore, realizes high working efficiency during assembly and decrease of inventory risk.
Most parts can be commonly used, resulting in decrease of inventory.
Chain Drive SystemThe spring assisted mechanism allows you to operate the blind with ease even for a large or tall windows.
Just pull down the pull ball or the pull grip, and the blind stops at anywhere you want. To raise the screen, pull the pull ball or the pull grip just a little. The blind rolls up at the same speed without acceleration.
Spring Drive System
Gentle and smooth roll-up.
Stops calmly. Colliding sound.
Too quick and rough roll-up.
The color variation of the Side Holder.
Mytec 01 Ordinary Roller Blinds Mytec 01 Ordinary Roller Blinds
Side Bracket Type Set Bar Type Side Bracket Type Set Bar Type
White Warm white Gray Black
Mytec 01 Mytec 01
Mytec 01’s Unique Features
Mytec 01 Loop
Mytec 01
Mytec 01 Loop (Chain Drive System) Mytec 01 (Spring Drive System)
Standard
Option
Top Box Type
Side Frame Type
Top Box + Side Frame Type
Guide Wire Type
Top Box + Guide Wire Type
Link Type
Double Type
Link Double Type
*Side Bracket type only
Mytec 01
Mytec 01 Product Lineup — Standard
Mytec 01
No crash at the top. A speed controller is standard for the spring drive system, enabling the blind to go up at a constant speed.
No irritation to stop the blind. The mechanism assures you to stop the blind anywhere at your discretion.
A stop controller is optional. It is a perfect solution to setting the upper limit position.
With Set Bar Type, one person can install the blind by him or herself. Install the brackets first and then snap the blind onto the brackets.
Mytec 01 Loop
Blinds up to 2700 mm (106") width and 3000 mm (118") height with 3.7 kg (8.2 lb) screen weight are possible.
The spring assist mechanism attached makes for light operation even on large windows.
Chain choice can be brass, stainless steel or plastic.
Link type, double type, and four color variations are available for Side Bracket type only.
With Set Bar Type, one person can install the blind by him or herself. Install the brackets first and then snap the blind onto the brackets.
*The bracket can be obscured by installing the bracket back and forth opposite, when setting it up.
*The bracket can be obscured by installing the bracket back and forth opposite, when setting it up.
Side Bracket Type Side Bracket Type
Set Bar Type Set Bar Type
Mytec 01
*Metal chain is standard but plastic one is optionally available.
4 5
Mytec 01
Mytec 01 Product Lineup — Standard
Mytec 01
No crash at the top. A speed controller is standard for the spring drive system, enabling the blind to go up at a constant speed.
No irritation to stop the blind. The mechanism assures you to stop the blind anywhere at your discretion.
A stop controller is optional. It is a perfect solution to setting the upper limit position.
With Set Bar Type, one person can install the blind by him or herself. Install the brackets first and then snap the blind onto the brackets.
Mytec 01 Loop
Blinds up to 2700 mm (106") width and 3000 mm (118") height with 3.7 kg (8.2 lb) screen weight are possible.
The spring assist mechanism attached makes for light operation even on large windows.
Chain choice can be brass, stainless steel or plastic.
Link type, double type, and four color variations are available for Side Bracket type only.
With Set Bar Type, one person can install the blind by him or herself. Install the brackets first and then snap the blind onto the brackets.
*The bracket can be obscured by installing the bracket back and forth opposite, when setting it up.
*The bracket can be obscured by installing the bracket back and forth opposite, when setting it up.
Side Bracket Type Side Bracket Type
Set Bar Type Set Bar Type
Mytec 01
*Metal chain is standard but plastic one is optionally available.
4 5
Refer to page 12
Refer to page 20
Refer to page 22
Refer to page 24
Refer to page 26
Refer to page 14
Refer to page 16
Refer to page 18
Mytec 01
Mytec 01 Product Lineup—Option
Mytec 01
Double TypeTwo screens of Mytec 01 Loop (Chain Drive System) can be doubly installed.Each screen can be operated by its own chain.
Mytec 01 Loop (Chain Drive System) Mytec 01 (Spring Drive System)Side Bracket Type Set Bar Type Side Bracket Type Set Bar Type
Side Frame Type
*Cannot be used for Mytec 01 (Spring Drive System).
Side Frame secures the screen of Mytec 01 Loop (Chain Drive System) system. The frame can fill a gap between screen and window case. It also prevents the screen from flip-flop due to wind from the outside, resulting in long-lasting use.
Mytec 01 Loop + Side Frame
Mytec 01 Loop (Chain Drive System) Mytec 01 (Spring Drive System)Side Bracket Type Set Bar Type Side Bracket Type Set Bar Type
Top Box + Side Frame Type
*Two sizes, S (Small) and M (Medium), are available for the Top Box.*Cannot be used for Mytec 01 (Spring Drive System).
Both Top Box and Side Frame are installed for the screen of Mytec 01 Loop (Chain Drive System). This type can fill a gap between screen and window case not only on either side but also at the top, reducing leak of light. It also prevents the screen from flip-flop due to wind from the outside, resulting in long-lasting use.
Mytec 01 Loop + Top Box + Side Frame
Mytec 01 Loop (Chain Drive System) Mytec 01 (Spring Drive System)Side Bracket Type Set Bar Type Side Bracket Type Set Bar Type
Guide Wire Type
*Steel and nylon wires are available. *Available for sloped window. (Angle: +/– 5˚, Depend on the screen.)
Guide Wires are installed on either side of the screens for both Mytec 01 systems to secure them anteroposteriorly. This simple wire can keep the appearance around the screen neat and enables the screen to tidily move up and down. It also prevents the screen from flip-flop due to wind from the outside, resulting in long-lasting use.
Mytec 01 Loop + Guide Wire Mytec 01 + Guide WireMytec 01 Loop (Chain Drive System) Mytec 01 (Spring Drive System)
Side Bracket Type Set Bar Type Side Bracket Type Set Bar Type
Top Box + Guide Wire Type
*
*
Two sizes, S (Small) and M (Medium), are available for the Top Box.Steel and nylon wires are available.
Both Top Box and Guide Wire are installed for the screens of Mytec 01 Loop and Mytec 01. Top Box can neatly cover the rolled-up screens and the Guide Wire enables the screen to tidily move up and down
Mytec 01 Loop + Top Box + Guide Wire
Mytec 01 + Top Box +Guide Wire
Mytec 01 Loop (Chain Drive System) Mytec 01 (Spring Drive System)Side Bracket Type Set Bar Type Side Bracket Type Set Bar Type
Link Type Two or three screens of Mytec 01 Loop (Chain Drive System) can be laterally installed. All screens can be operated by one chain. This type is recommended for wide-opening windows.
Mytec 01 Loop (Chain Drive System) Mytec 01 (Spring Drive System)Side Bracket Type Set Bar Type Side Bracket Type Set Bar Type
Link Double Type Double Type and Link Type of Mytec 01 Loop are combined. The screens installed doubly can be operated by their own chains and two or three screens installed laterally can be operated by one chain.
Mytec 01 Loop (Chain Drive System) Mytec 01 (Spring Drive System)Side Bracket Type Set Bar Type Side Bracket Type Set Bar Type
Top Box Type
*Two sizes, S (Small) and M (Medium), are available for the Top Box.
Top Box covers the rolled-up screens of both Mytec 01 systems. Top Box is simple form and design, and can neatly house screens without disfigurement.
Mytec 01 Loop + Top Box Mytec 01 + Top Box
Mytec 01 Loop (Chain Drive System) Mytec 01 (Spring Drive System)Side Bracket Type Set Bar Type Side Bracket Type Set Bar Type
6 7
Refer to page 12
Refer to page 20
Refer to page 22
Refer to page 24
Refer to page 26
Refer to page 14
Refer to page 16
Refer to page 18
Mytec 01
Mytec 01 Product Lineup—Option
Mytec 01
Double TypeTwo screens of Mytec 01 Loop (Chain Drive System) can be doubly installed.Each screen can be operated by its own chain.
Mytec 01 Loop (Chain Drive System) Mytec 01 (Spring Drive System)Side Bracket Type Set Bar Type Side Bracket Type Set Bar Type
Side Frame Type
*Cannot be used for Mytec 01 (Spring Drive System).
Side Frame secures the screen of Mytec 01 Loop (Chain Drive System) system. The frame can fill a gap between screen and window case. It also prevents the screen from flip-flop due to wind from the outside, resulting in long-lasting use.
Mytec 01 Loop + Side Frame
Mytec 01 Loop (Chain Drive System) Mytec 01 (Spring Drive System)Side Bracket Type Set Bar Type Side Bracket Type Set Bar Type
Top Box + Side Frame Type
*Two sizes, S (Small) and M (Medium), are available for the Top Box.*Cannot be used for Mytec 01 (Spring Drive System).
Both Top Box and Side Frame are installed for the screen of Mytec 01 Loop (Chain Drive System). This type can fill a gap between screen and window case not only on either side but also at the top, reducing leak of light. It also prevents the screen from flip-flop due to wind from the outside, resulting in long-lasting use.
Mytec 01 Loop + Top Box + Side Frame
Mytec 01 Loop (Chain Drive System) Mytec 01 (Spring Drive System)Side Bracket Type Set Bar Type Side Bracket Type Set Bar Type
Guide Wire Type
*Steel and nylon wires are available. *Available for sloped window. (Angle: +/– 5˚, Depend on the screen.)
Guide Wires are installed on either side of the screens for both Mytec 01 systems to secure them anteroposteriorly. This simple wire can keep the appearance around the screen neat and enables the screen to tidily move up and down. It also prevents the screen from flip-flop due to wind from the outside, resulting in long-lasting use.
Mytec 01 Loop + Guide Wire Mytec 01 + Guide WireMytec 01 Loop (Chain Drive System) Mytec 01 (Spring Drive System)
Side Bracket Type Set Bar Type Side Bracket Type Set Bar Type
Top Box + Guide Wire Type
*
*
Two sizes, S (Small) and M (Medium), are available for the Top Box.Steel and nylon wires are available.
Both Top Box and Guide Wire are installed for the screens of Mytec 01 Loop and Mytec 01. Top Box can neatly cover the rolled-up screens and the Guide Wire enables the screen to tidily move up and down
Mytec 01 Loop + Top Box + Guide Wire
Mytec 01 + Top Box +Guide Wire
Mytec 01 Loop (Chain Drive System) Mytec 01 (Spring Drive System)Side Bracket Type Set Bar Type Side Bracket Type Set Bar Type
Link Type Two or three screens of Mytec 01 Loop (Chain Drive System) can be laterally installed. All screens can be operated by one chain. This type is recommended for wide-opening windows.
Mytec 01 Loop (Chain Drive System) Mytec 01 (Spring Drive System)Side Bracket Type Set Bar Type Side Bracket Type Set Bar Type
Link Double Type Double Type and Link Type of Mytec 01 Loop are combined. The screens installed doubly can be operated by their own chains and two or three screens installed laterally can be operated by one chain.
Mytec 01 Loop (Chain Drive System) Mytec 01 (Spring Drive System)Side Bracket Type Set Bar Type Side Bracket Type Set Bar Type
Top Box Type
*Two sizes, S (Small) and M (Medium), are available for the Top Box.
Top Box covers the rolled-up screens of both Mytec 01 systems. Top Box is simple form and design, and can neatly house screens without disfigurement.
Mytec 01 Loop + Top Box Mytec 01 + Top Box
Mytec 01 Loop (Chain Drive System) Mytec 01 (Spring Drive System)Side Bracket Type Set Bar Type Side Bracket Type Set Bar Type
6 7
8 9
* Selectable*Refer to 29 page for the Installation Dimension.
Mytec 01 Loop unit
11.8 mm (.46")
11.8 mm (.46")
31.5 mm (1.24")
4 mm (.16")
16 mm (.63") 21 mm (.83")W–39 mm (1.5")
45 mm (1.8")Product width (W) With Side Cover: +2 mm (.08")
Side HolderM: 47 mm (1.9")S: 37 mm (1.5")
Side HolderM: 47 mm (1.9")S: 37 mm (1.5")
Side HolderM: 47 mm (1.9")S: 37 mm (1.5")
Side HolderM: 47 mm (1.9")S: 37 mm (1.5")
For Plastic Chain
Product height (H)
42 mm(1.7")
22 mm(.87")
10 mm(.39")
22 mm (.87")
20 mm (.79")(For M size)
20 mm (.79")(For M size)
10 mm(.39")
For unnecessary Spring Assist
48.5 mm (1.9")
42 mm(1.7")
For Plastic Chain
4 mm (.16")
16 mm (.63") 21 mm (.83")W–39 mm (1.5")
50 mm (2.0")
45 mm(1.8")
Product width (W) With Side Cover: +2 mm (.08")
Product height (H)
Side HolderL: 58 mm (2.3")M: 50 mm (2.0") Side Holder
L: 58 mm (2.3")M: 50 mm (2.0")
Side HolderL: 58 mm (2.3")M: 50 mm (2.0")
Side HolderL: 58 mm (2.3")M: 50 mm (2.0")
For unnecessary Spring Assist
Set Bar (For Set Bar type)
SP Side Holder
Bracket (For Set Bar type)
Chain Side Holder
Ball Chain (Metal or Plastic)
Ball Chain Connector(Metal or Plastic)
MT03 Bottom Inner Bar
Side Holder Cover *
Side Holder Cover *
MT03 Weight Bar Cap
MT03 Weight Bar
Roller Pipe
Spring Set
Chain Housing
*For non wrapping type.
Components and Materials
Aluminum
Aluminum
Steel, Molded resin
Steel, Molded resin
Steel, Molded resin
MaterialComponentsNo.
Set Bar
Roller Pipe
Spring Set
Non-balancer Set
Chain Housing
Steel, Molded resin
Steel, Molded resin
Molded resin
Steel, Molded resin
SUS or Brass
MaterialComponentsNo.
SP Side Holder S/M/L
Chain Side Holder S/M/L
Side Holder Cover S/M/L
Bracket
Metal Ball Chain
Molded resin
SUS or Brass
Molded resin
Aluminum
Molded resin
MaterialComponentsNo.
Plastic Ball Chain
Metal Ball Chain Connector
Plastic Ball Chain Joints
MT03 Weight Bar
MT03 Weight Bar Cap
Side Bracket Type
Set Bar Type
Mytec 01Mytec 01
Structure Drawing—Mytec 01 Loop (Standard)
Bracket
1400 mm (55") or less
1410 mm (56") or more
2
3
Product Width Number of Bracket
Weight Bar
Non wrapping type Wrapping type
Specifications
Allowable Size
(Width: 2000 mm/79" without screen) Ex.: Spring Set F, Side Holder M—Ball Chain length is 3000 mm (118")
Maximum Screen Weight
Product Weight
Product Height (H)
Ratio (W : H)
Product Width (W)
1.9 kg (4.2 lb) 2.3 kg (5.1 lb) 1.8 kg (4.0 lb) 2.2 kg (4.9 lb)
3.7 kg (8.2 lb) 3.2 kg (7.1 lb)
1 : 3 (limit)
100 mm (3.9") to 3000 mm (118")
Side Bracket Type (1 unit) Set Bar Type Side Bracket Type (1 unit)
Metal Ball Chain Plastic Ball Chain (Option)
Set Bar Type
Notes: Regarding allowable size (W, H, Ratio), depending on material and weight, the screen may get wrinkled, curled or frayed. Maximum Screen Weights are different according to the screen material.
*Please use Roller Pipe 45 mm DIA for W=2,010 mm (79.1") or more.
: Use S/M for Side Bracket type, and use M/L for Set Bar type.
300 mm (11.8") to 2700 mm (106")*
Product View Exploded View
46.5 mm (1.8")
16.5 mm (.65")
23.5 mm(.93")
43 mm (1.7")
5.6 mm (.22")
4.1 mm(.16")
4.5 mm (.18")
10 mm(.39")
*Set Bar type only.
8 9
* Selectable*Refer to 29 page for the Installation Dimension.
Mytec 01 Loop unit
11.8 mm (.46")
11.8 mm (.46")
31.5 mm (1.24")
4 mm (.16")
16 mm (.63") 21 mm (.83")W–39 mm (1.5")
45 mm (1.8")Product width (W) With Side Cover: +2 mm (.08")
Side HolderM: 47 mm (1.9")S: 37 mm (1.5")
Side HolderM: 47 mm (1.9")S: 37 mm (1.5")
Side HolderM: 47 mm (1.9")S: 37 mm (1.5")
Side HolderM: 47 mm (1.9")S: 37 mm (1.5")
For Plastic Chain
Product height (H)
42 mm(1.7")
22 mm(.87")
10 mm(.39")
22 mm (.87")
20 mm (.79")(For M size)
20 mm (.79")(For M size)
10 mm(.39")
For unnecessary Spring Assist
48.5 mm (1.9")
42 mm(1.7")
For Plastic Chain
4 mm (.16")
16 mm (.63") 21 mm (.83")W–39 mm (1.5")
50 mm (2.0")
45 mm(1.8")
Product width (W) With Side Cover: +2 mm (.08")
Product height (H)
Side HolderL: 58 mm (2.3")M: 50 mm (2.0") Side Holder
L: 58 mm (2.3")M: 50 mm (2.0")
Side HolderL: 58 mm (2.3")M: 50 mm (2.0")
Side HolderL: 58 mm (2.3")M: 50 mm (2.0")
For unnecessary Spring Assist
Set Bar (For Set Bar type)
SP Side Holder
Bracket (For Set Bar type)
Chain Side Holder
Ball Chain (Metal or Plastic)
Ball Chain Connector(Metal or Plastic)
MT03 Bottom Inner Bar
Side Holder Cover *
Side Holder Cover *
MT03 Weight Bar Cap
MT03 Weight Bar
Roller Pipe
Spring Set
Chain Housing
*For non wrapping type.
Components and Materials
Aluminum
Aluminum
Steel, Molded resin
Steel, Molded resin
Steel, Molded resin
MaterialComponentsNo.
Set Bar
Roller Pipe
Spring Set
Non-balancer Set
Chain Housing
Steel, Molded resin
Steel, Molded resin
Molded resin
Steel, Molded resin
SUS or Brass
MaterialComponentsNo.
SP Side Holder S/M/L
Chain Side Holder S/M/L
Side Holder Cover S/M/L
Bracket
Metal Ball Chain
Molded resin
SUS or Brass
Molded resin
Aluminum
Molded resin
MaterialComponentsNo.
Plastic Ball Chain
Metal Ball Chain Connector
Plastic Ball Chain Joints
MT03 Weight Bar
MT03 Weight Bar Cap
Side Bracket Type
Set Bar Type
Mytec 01Mytec 01
Structure Drawing—Mytec 01 Loop (Standard)
Bracket
1400 mm (55") or less
1410 mm (56") or more
2
3
Product Width Number of Bracket
Weight Bar
Non wrapping type Wrapping type
Specifications
Allowable Size
(Width: 2000 mm/79" without screen) Ex.: Spring Set F, Side Holder M—Ball Chain length is 3000 mm (118")
Maximum Screen Weight
Product Weight
Product Height (H)
Ratio (W : H)
Product Width (W)
1.9 kg (4.2 lb) 2.3 kg (5.1 lb) 1.8 kg (4.0 lb) 2.2 kg (4.9 lb)
3.7 kg (8.2 lb) 3.2 kg (7.1 lb)
1 : 3 (limit)
100 mm (3.9") to 3000 mm (118")
Side Bracket Type (1 unit) Set Bar Type Side Bracket Type (1 unit)
Metal Ball Chain Plastic Ball Chain (Option)
Set Bar Type
Notes: Regarding allowable size (W, H, Ratio), depending on material and weight, the screen may get wrinkled, curled or frayed. Maximum Screen Weights are different according to the screen material.
*Please use Roller Pipe 45 mm DIA for W=2,010 mm (79.1") or more.
: Use S/M for Side Bracket type, and use M/L for Set Bar type.
300 mm (11.8") to 2700 mm (106")*
Product View Exploded View
46.5 mm (1.8")
16.5 mm (.65")
23.5 mm(.93")
43 mm (1.7")
5.6 mm (.22")
4.1 mm(.16")
4.5 mm (.18")
10 mm(.39")
*Set Bar type only.
1400 mm (55") or less
1410 mm (56") or more
2
3
Product Width Number of Bracket
31.5 mm (1.24")
22 mm (.87")
10 mm(.39")
20 mm (.79")(For M size)
4 mm (.16")
16 mm (.63") 16 mm (.63")W–34 mm (1.3")
Product width (W) With Side Cover: +2 mm (.08")
Product height (H)
42 mm (1.7")
22 mm(.87")
45 mm (1.8")Side HolderM: 47 mm (1.9")S: 37 mm (1.5")
Side HolderM: 47 mm (1.9")S: 37 mm (1.5")
Side HolderM: 47 mm (1.9")S: 37 mm (1.5")
Side HolderM: 47 mm (1.9")S: 37 mm (1.5")
11.8 mm (.46")
11.8 mm (.46")
10 mm(.39")
20 mm (.79")(For M size)
Option (with Stop Controller)
16 mm (.63") 16 mm (.63")W–34 mm (1.3")
Product width (W) With Side Cover: +2 mm (.08")
Product height (H)
48.5 mm (1.9")
42 mm(1.7")
50 mm (2.0")
45 mm(1.8")
Side HolderL: 58 mm (2.3")M: 50 mm (2.0")
Side HolderL: 58 mm (2.3")M: 50 mm (2.0")
Side HolderL: 58 mm (2.3")M: 50 mm (2.0")
Side HolderL: 58 mm (2.3")M: 50 mm (2.0")
4 mm (.16")
Option (with Stop Controller*)
Stop Controller
Stop ControllerSide Holder
End Side Holder
Side Holder Cover *
Side Holder Cover *
SP Side Holder
MT03 Bottom Inner Bar
MT03 Weight Bar CapMT03 Weight Bar
Bracket (For Set Bar type)
Set Bar (For Set Bar type)
* For use the Stop Controller
Roller Pipe
Pipe End
Clutch
Connect Pin
Speed Controller
Spring Set
*For non wrapping type.
Components and Materials
Aluminum
Aluminum
Steel, Molded resin
Steel, Molded resin
Molded resin
Steel, Molded resin
MaterialComponentsNo.
Set Bar
Roller Pipe
Spring Set
SP Side Holder S/M/L
Side Holder Cover S/M/L
Bracket
Aluminum
Molded resin
Molded resin
Molded resin
Molded resin
Steel, Molded resin
MaterialComponentsNo.
MT03 Weight Bar
MT03 Weight Bar Cap
Clutch
Speed Controller
Pipe End
End Side Holder S/M/L
Steel, Molded resin
Molded resin
Molded resin
Molded resin
Molded resin
MaterialComponentsNo.
SC Side Holder S/M/L
Stop Controller
MT03 Pull Ball Set
MT03 Pull Grip Set
MT03 Flat Grip Set
: Use S/M for Side Bracket type, and use M/L for Set Bar type.
Mytec 01Mytec 01
Structure Drawing—Mytec 01 (Standard)
Bracket46.5 mm (1.8")
16.5 mm (.65")
23.5 mm
(.93")
43 mm (1.7")
5.6 mm (.22")
4.1 mm
(.16")
4.5 mm
(.18")
10 mm
(.39")
Weight Bar
Non wrapping type Wrapping type
Specifications
Allowable Size
(Width: 2000 mm/79" without screen) Ex.: Spring Set F, Side Holder M
Maximum Screen Weight
Product Weight
Product Height (H)
Ratio (W : H)
Product Width (W)
1.9 kg (4.2 lb) 2.3 kg (5.1 lb)
1.8 kg (3.0 lb)
1 : 3 (limit)
100 mm (3.9") to 3000 mm (118")
Side Bracket Type (1 unit) Set Bar Type
Notes: Regarding allowable size (W, H, Ratio), depending on material and weight, the screen may get wrinkled, curled or frayed. Maximum Screen Weights are different according to the screen material.
*Minimum width is 600 mm (23.6") at Stop Controller using. (Depend on the screen.)
300 mm (11.8") to 2000 mm (78.7") *
Product View Exploded View
* Set Bar type only.
10 11
Side Bracket Type
Set Bar Type
*Refer to 29 page for the Installation Dimension.
Mytec 01 unit
* Selectable
1400 mm (55") or less
1410 mm (56") or more
2
3
Product Width Number of Bracket
31.5 mm (1.24")
22 mm (.87")
10 mm(.39")
20 mm (.79")(For M size)
4 mm (.16")
16 mm (.63") 16 mm (.63")W–34 mm (1.3")
Product width (W) With Side Cover: +2 mm (.08")
Product height (H)
42 mm (1.7")
22 mm(.87")
45 mm (1.8")Side HolderM: 47 mm (1.9")S: 37 mm (1.5")
Side HolderM: 47 mm (1.9")S: 37 mm (1.5")
Side HolderM: 47 mm (1.9")S: 37 mm (1.5")
Side HolderM: 47 mm (1.9")S: 37 mm (1.5")
11.8 mm (.46")
11.8 mm (.46")
10 mm(.39")
20 mm (.79")(For M size)
Option (with Stop Controller)
16 mm (.63") 16 mm (.63")W–34 mm (1.3")
Product width (W) With Side Cover: +2 mm (.08")
Product height (H)
48.5 mm (1.9")
42 mm(1.7")
50 mm (2.0")
45 mm(1.8")
Side HolderL: 58 mm (2.3")M: 50 mm (2.0")
Side HolderL: 58 mm (2.3")M: 50 mm (2.0")
Side HolderL: 58 mm (2.3")M: 50 mm (2.0")
Side HolderL: 58 mm (2.3")M: 50 mm (2.0")
4 mm (.16")
Option (with Stop Controller*)
Stop Controller
Stop ControllerSide Holder
End Side Holder
Side Holder Cover *
Side Holder Cover *
SP Side Holder
MT03 Bottom Inner Bar
MT03 Weight Bar CapMT03 Weight Bar
Bracket (For Set Bar type)
Set Bar (For Set Bar type)
* For use the Stop Controller
Roller Pipe
Pipe End
Clutch
Connect Pin
Speed Controller
Spring Set
*For non wrapping type.
Components and Materials
Aluminum
Aluminum
Steel, Molded resin
Steel, Molded resin
Molded resin
Steel, Molded resin
MaterialComponentsNo.
Set Bar
Roller Pipe
Spring Set
SP Side Holder S/M/L
Side Holder Cover S/M/L
Bracket
Aluminum
Molded resin
Molded resin
Molded resin
Molded resin
Steel, Molded resin
MaterialComponentsNo.
MT03 Weight Bar
MT03 Weight Bar Cap
Clutch
Speed Controller
Pipe End
End Side Holder S/M/L
Steel, Molded resin
Molded resin
Molded resin
Molded resin
Molded resin
MaterialComponentsNo.
SC Side Holder S/M/L
Stop Controller
MT03 Pull Ball Set
MT03 Pull Grip Set
MT03 Flat Grip Set
: Use S/M for Side Bracket type, and use M/L for Set Bar type.
Mytec 01Mytec 01
Structure Drawing—Mytec 01 (Standard)
Bracket46.5 mm (1.8")
16.5 mm (.65")
23.5 mm
(.93")
43 mm (1.7")
5.6 mm (.22")
4.1 mm
(.16")
4.5 mm
(.18")
10 mm
(.39")
Weight Bar
Non wrapping type Wrapping type
Specifications
Allowable Size
(Width: 2000 mm/79" without screen) Ex.: Spring Set F, Side Holder M
Maximum Screen Weight
Product Weight
Product Height (H)
Ratio (W : H)
Product Width (W)
1.9 kg (4.2 lb) 2.3 kg (5.1 lb)
1.8 kg (3.0 lb)
1 : 3 (limit)
100 mm (3.9") to 3000 mm (118")
Side Bracket Type (1 unit) Set Bar Type
Notes: Regarding allowable size (W, H, Ratio), depending on material and weight, the screen may get wrinkled, curled or frayed. Maximum Screen Weights are different according to the screen material.
*Minimum width is 600 mm (23.6") at Stop Controller using. (Depend on the screen.)
300 mm (11.8") to 2000 mm (78.7") *
Product View Exploded View
* Set Bar type only.
10 11
Side Bracket Type
Set Bar Type
*Refer to 29 page for the Installation Dimension.
Mytec 01 unit
* Selectable
Pile Tape *
Top Box Base
Top Box Ceiling Bracket *
Top Box Wall Bracket *
Top Box Cap
Top Box Cap
Chain Side Holder for Top Box (Mytec 01: End Side Holder for Top Boxor SC Side Holder for Top Box)
SP Side Holder for Top Box
Top Box Cover
Ball Chain (Metal or Plastic)
Ball Chain Connector(Metal or Plastic)
Chain Housing
Mytec 01 Loop / Mytec 01 unit
Components and Materials
Aluminum
Steel, Molded resin
Steel, Molded resin
Steel, Molded resin
SUS or Brass
Molded resin
SUS or Brass
Molded resin
Aluminum
MaterialComponentsNo.
Roller Pipe
Spring Set
Non-balancer Set
Chain Housing
Metal Ball Chain
Plastic Ball Chain
Metal Ball Chain Connector
Plastic Ball Chain Joints
MT03 Weight Bar
Molded resin
Aluminum
Aluminum
Steel, Molded resin
Steel, Molded resin
Molded resin
SUS
Molded resin
Molded resin
MaterialComponentsNo.
MT03 Weight Bar Cap
Top Box Base Plate
Top Box Front Cover
SP Side Holder for Top Box S/M
Chain Side Holder for Top Box S/M
Top Box Cap (L/R) S/M
Top Box Ceiling Bracket
Clutch
Speed Controller
Molded resin
Molded resin
Molded resin
Molded resin
Molded resin
Molded resin
Molded resin
SUS, Steel
MaterialComponentsNo.
Pipe End
Stop Controller
MT03 Pull Ball Set
MT03 Pull Grip Set
MT03 Flat Grip Set
End Side Holder for Top Box S/M
SC Side Holder for Top Box S/M
Top Box Wall Bracket
Product height (H)
Product width (W)
24.5 mm (.96")19.5 mm (.77") W–44 mm (1.7")
Top Box: S Top Box: M
Top Box: S Top Box: M
For Plastic Chain
20 mm (.79")
57 mm (2.2")
22.5 mm (.89")22.5 mm (.89")47 mm (1.9")
70.6 mm (2.8")
89.8 mm (3.5")
89.8 mm (3.5")
70.6 mm (2.8")
22.5 mm (.89")22.5 mm (.89")
3.8 mm(.15")
5.4 mm(.21")
5.4 mm(.21")
3.8 mm(.15")
3.8 mm(.15")3.8 mm
(.15")
47 mm (1.9")
70.6 mm (2.8")
70.6 mm (2.8")
71.2 mm (2.8")
89.8 mm (3.5")
89.8 mm (3.5")
71.2 mm (2.8")
61.2 mm (2.4")
10 mm(.39") 10 mm
(.39")
57 mm (2.2")
10 mm(.39")
10 mm(.39")
10 mm(.39")
4 mm (.16")
19.5 mm (.77")19.5 mm (.77") W–39 mm (1.5")
4 mm (.16")
20 mm (.79")
10 mm(.39")
Product width (W)
5.4 mm(.21")5.4 mm
(.21")
61.2 mm (2.4")
Product height (H)
Option (with Stop Controller *2)
For unnecessary Spring Assist
Product height (H)
Product width (W)
24.5 mm (.96")19.5 mm (.77") W–44 mm (1.7")
Top Box: S Top Box: M
Top Box: S Top Box: M
For Plastic Chain
20 mm (.79")
57 mm (2.2")
22.5 mm (.89")22.5 mm (.89")47 mm (1.9")
70.6 mm (2.8")
89.8 mm (3.5")
89.8 mm (3.5")
70.6 mm (2.8")
22.5 mm (.89")22.5 mm (.89")
3.8 mm(.15")
5.4 mm(.21")
5.4 mm(.21")
3.8 mm(.15")
3.8 mm(.15")3.8 mm
(.15")
47 mm (1.9")
70.6 mm (2.8")
70.6 mm (2.8")
71.2 mm (2.8")
89.8 mm (3.5")
89.8 mm (3.5")
71.2 mm (2.8")
61.2 mm (2.4")
10 mm(.39") 10 mm
(.39")
57 mm (2.2")
10 mm(.39")
10 mm(.39")
10 mm(.39")
4 mm (.16")
19.5 mm (.77")19.5 mm (.77") W–39 mm (1.5")
4 mm (.16")
20 mm (.79")
10 mm(.39")
Product width (W)
5.4 mm(.21")5.4 mm
(.21")
61.2 mm (2.4")
Product height (H)
Option (with Stop Controller *2)
For unnecessary Spring Assist
Mytec 01Mytec 01
Structure Drawing—Mytec 01 Loop and Mytec 01 / Top Box Type (Option)
Specifications
Allowable Size
(Width: 2000 mm/79" without screen) Ex.: Spring Set F, Side Holder M—Ball Chain length is 3000 mm (118"), Top Box M
(Width: 2000 mm/79" without screen) Ex.: Spring Set F, Side Holder M, Top Box M
Maximum Screen Weight
Product Weight
Product Height (H)
Ratio (W : H)
Product Width (W)
3.7 kg
5.2 kg
(8.2 lb)
(11.4 lb)
1.8 kg
5.2 kg
(4.0 lb)
(11.4 lb)
3.2 kg
5.0 kg
(7.1 lb)
(11.0 lb)
1 : 3 (limit)
Metal Ball Chain Plastic Ball Chain Mytec 01 (Spring Drive System)
Notes: Regarding allowable size (W, H, Ratio), depending on material and weight, the screen may get wrinkled, curled or frayed. Maximum Screen Weights are different according to the screen material.
*1 Please use Roller Pipe 45 mm DIA for W=2,010 mm (79.1") or more.
*2 Minimum width is 600 mm (23.6") at Stop Controller using. (Depend on the screen.)
100 mm (3.9") to 3000 mm (118")
300 mm (11.8") to 2700 mm (106") *1 *2 300 mm (11.8") to 2000 mm (78.7")
Ex. Mytec 01 Loop Top Box type
* Selectable
Weight Bar
Non wrappingtype
Wrappingtype
1400 mm (55") or less
1410 mm (56") or more
2
3
Product Width Number of Bracket
Brackets
45.4 mm(1.8")
45.4 mm(1.8")
34.5 mm (1.4")
30.5 mm (1.2")
16 mm(.63")
27.2 mm(1.1")
58.8 mm (2.3")
57 mm (2.2")
Wall Bracket S
47.6 mm (1.9")
8.6 mm(.34")
20 mm(.79")
45.4 mm(1.8")
48.7 mm (1.9")10 mm (.39")
27.2 mm(1.1")
73 mm (2.9")
57 mm (2.2")
4.2 mm(.17")
Ceiling Bracket Wall Bracket M
45.4 mm(1.8")
30.5 mm (1.2")
16 mm(.63")
Product View Exploded View*Refer to 31 page for the Installation Dimension.
12 13
Mytec 01 Loop *Direct attachment is possible.
Mytec 01 *Direct attachment is possible.
Pile Tape *
Top Box Base
Top Box Ceiling Bracket *
Top Box Wall Bracket *
Top Box Cap
Top Box Cap
Chain Side Holder for Top Box (Mytec 01: End Side Holder for Top Boxor SC Side Holder for Top Box)
SP Side Holder for Top Box
Top Box Cover
Ball Chain (Metal or Plastic)
Ball Chain Connector(Metal or Plastic)
Chain Housing
Mytec 01 Loop / Mytec 01 unit
Components and Materials
Aluminum
Steel, Molded resin
Steel, Molded resin
Steel, Molded resin
SUS or Brass
Molded resin
SUS or Brass
Molded resin
Aluminum
MaterialComponentsNo.
Roller Pipe
Spring Set
Non-balancer Set
Chain Housing
Metal Ball Chain
Plastic Ball Chain
Metal Ball Chain Connector
Plastic Ball Chain Joints
MT03 Weight Bar
Molded resin
Aluminum
Aluminum
Steel, Molded resin
Steel, Molded resin
Molded resin
SUS
Molded resin
Molded resin
MaterialComponentsNo.
MT03 Weight Bar Cap
Top Box Base Plate
Top Box Front Cover
SP Side Holder for Top Box S/M
Chain Side Holder for Top Box S/M
Top Box Cap (L/R) S/M
Top Box Ceiling Bracket
Clutch
Speed Controller
Molded resin
Molded resin
Molded resin
Molded resin
Molded resin
Molded resin
Molded resin
SUS, Steel
MaterialComponentsNo.
Pipe End
Stop Controller
MT03 Pull Ball Set
MT03 Pull Grip Set
MT03 Flat Grip Set
End Side Holder for Top Box S/M
SC Side Holder for Top Box S/M
Top Box Wall Bracket
Product height (H)
Product width (W)
24.5 mm (.96")19.5 mm (.77") W–44 mm (1.7")
Top Box: S Top Box: M
Top Box: S Top Box: M
For Plastic Chain
20 mm (.79")
57 mm (2.2")
22.5 mm (.89")22.5 mm (.89")47 mm (1.9")
70.6 mm (2.8")
89.8 mm (3.5")
89.8 mm (3.5")
70.6 mm (2.8")
22.5 mm (.89")22.5 mm (.89")
3.8 mm(.15")
5.4 mm(.21")
5.4 mm(.21")
3.8 mm(.15")
3.8 mm(.15")3.8 mm
(.15")
47 mm (1.9")
70.6 mm (2.8")
70.6 mm (2.8")
71.2 mm (2.8")
89.8 mm (3.5")
89.8 mm (3.5")
71.2 mm (2.8")
61.2 mm (2.4")
10 mm(.39") 10 mm
(.39")
57 mm (2.2")
10 mm(.39")
10 mm(.39")
10 mm(.39")
4 mm (.16")
19.5 mm (.77")19.5 mm (.77") W–39 mm (1.5")
4 mm (.16")
20 mm (.79")
10 mm(.39")
Product width (W)
5.4 mm(.21")5.4 mm
(.21")
61.2 mm (2.4")
Product height (H)
Option (with Stop Controller *2)
For unnecessary Spring Assist
Product height (H)
Product width (W)
24.5 mm (.96")19.5 mm (.77") W–44 mm (1.7")
Top Box: S Top Box: M
Top Box: S Top Box: M
For Plastic Chain
20 mm (.79")
57 mm (2.2")
22.5 mm (.89")22.5 mm (.89")47 mm (1.9")
70.6 mm (2.8")
89.8 mm (3.5")
89.8 mm (3.5")
70.6 mm (2.8")
22.5 mm (.89")22.5 mm (.89")
3.8 mm(.15")
5.4 mm(.21")
5.4 mm(.21")
3.8 mm(.15")
3.8 mm(.15")3.8 mm
(.15")
47 mm (1.9")
70.6 mm (2.8")
70.6 mm (2.8")
71.2 mm (2.8")
89.8 mm (3.5")
89.8 mm (3.5")
71.2 mm (2.8")
61.2 mm (2.4")
10 mm(.39") 10 mm
(.39")
57 mm (2.2")
10 mm(.39")
10 mm(.39")
10 mm(.39")
4 mm (.16")
19.5 mm (.77")19.5 mm (.77") W–39 mm (1.5")
4 mm (.16")
20 mm (.79")
10 mm(.39")
Product width (W)
5.4 mm(.21")5.4 mm
(.21")
61.2 mm (2.4")
Product height (H)
Option (with Stop Controller *2)
For unnecessary Spring Assist
Mytec 01Mytec 01
Structure Drawing—Mytec 01 Loop and Mytec 01 / Top Box Type (Option)
Specifications
Allowable Size
(Width: 2000 mm/79" without screen) Ex.: Spring Set F, Side Holder M—Ball Chain length is 3000 mm (118"), Top Box M
(Width: 2000 mm/79" without screen) Ex.: Spring Set F, Side Holder M, Top Box M
Maximum Screen Weight
Product Weight
Product Height (H)
Ratio (W : H)
Product Width (W)
3.7 kg
5.2 kg
(8.2 lb)
(11.4 lb)
1.8 kg
5.2 kg
(4.0 lb)
(11.4 lb)
3.2 kg
5.0 kg
(7.1 lb)
(11.0 lb)
1 : 3 (limit)
Metal Ball Chain Plastic Ball Chain Mytec 01 (Spring Drive System)
Notes: Regarding allowable size (W, H, Ratio), depending on material and weight, the screen may get wrinkled, curled or frayed. Maximum Screen Weights are different according to the screen material.
*1 Please use Roller Pipe 45 mm DIA for W=2,010 mm (79.1") or more.
*2 Minimum width is 600 mm (23.6") at Stop Controller using. (Depend on the screen.)
100 mm (3.9") to 3000 mm (118")
300 mm (11.8") to 2700 mm (106") *1 *2 300 mm (11.8") to 2000 mm (78.7")
Ex. Mytec 01 Loop Top Box type
* Selectable
Weight Bar
Non wrappingtype
Wrappingtype
1400 mm (55") or less
1410 mm (56") or more
2
3
Product Width Number of Bracket
Brackets
45.4 mm(1.8")
45.4 mm(1.8")
34.5 mm (1.4")
30.5 mm (1.2")
16 mm(.63")
27.2 mm(1.1")
58.8 mm (2.3")
57 mm (2.2")
Wall Bracket S
47.6 mm (1.9")
8.6 mm(.34")
20 mm(.79")
45.4 mm(1.8")
48.7 mm (1.9")10 mm (.39")
27.2 mm(1.1")
73 mm (2.9")
57 mm (2.2")
4.2 mm(.17")
Ceiling Bracket Wall Bracket M
45.4 mm(1.8")
30.5 mm (1.2")
16 mm(.63")
Product View Exploded View*Refer to 31 page for the Installation Dimension.
12 13
Mytec 01 Loop *Direct attachment is possible.
Mytec 01 *Direct attachment is possible.
Components and Materials
Aluminum
Aluminum
Steel, Molded resin
Steel, Molded resin
Steel, Molded resin
Steel, Molded resin
Molded resin
MaterialComponentsNo.
Set Bar
Roller Pipe
Spring Set
Chain Housing
SP Side Holder S/M/L
Chain Side Holder S/M/L
Side Holder Cover S/M/L
Steel, Molded resin
SUS or Brass
Molded resin
SUS or Brass
Molded resin
MaterialComponentsNo.
Bracket
Metal Ball Chain
Plastic Ball Chain
Metal Ball Chain Connector
Plastic Ball Chain Joints
Aluminum
Molded resin
Aluminum
Molded resin
Molded resin
MaterialComponentsNo.
Side Frame Base/Cover
Side Frame Cap
Weight Bar for Side Frame
Weight Bar Cap for Side Frame
Side Frame Holder
Mytec 01Mytec 01
Structure Drawing—Mytec 01 Loop / Side Frame Type (Option)
Specifications
Allowable Size
(Width: 2000 mm/79" without screen) Ex.: Spring Set F, Side Holder M, Ball Chain length is 3000 mm (118")Side Frame length is 3000 mm (118")
Maximum Screen Weight
Product Weight
Product Height (H)
Ratio (W : H)
Product Width (W)
3.7 kg
2.4 kg
(8.2 lb)
(5.3 lb)
3.2 kg
2.3 kg
(7.1 lb)
(5.1 lb)
1 : 3 (limit)
Metal Ball Chain Plastic Ball Chain
Notes: Regarding allowable size (W, H, Ratio), depending on material and weight, the screen may get wrinkled, curled or frayed. Maximum Screen Weights are different according to the screen material.
*Please use Roller Pipe 45 mm DIA for W=2,010 mm (79.1") or more.
100 mm (3.9") to 3000 mm (118")
300 mm (11.8") to 2700 mm (106") *
Product View Exploded View
Pile Tape *
Pile Tape *
Pile Tape *
Side Frame Cap
Weight Bar Cap for Side Frame
Weight Bar Cap for Side Frame
Weight Bar for Side Frame
Side Frame Cap
Side HolderCover *
Side HolderCover *
Ball Chain (Metal or Plastic)
Side Frame Holder
Side Frame Base
Side Frame Base
Pile Tape *
Side Frame Cover
Pile Tape
Side Frame Holder
Ball Chain Connector(Metal or Plastic)
Mytec 01 Loop unitBracket (For Set Bar type)
Set Bar (For Set Bar type)
14 15
Mytec 01 Loop / Side Bracket Type *Ceiling attachment only.
Mytec 01 Loop / Set Bar Type *Ceiling attachment only.
Ex. Mytec 01 Loop Side Frame type
*Set Bar type only.
1400 mm (55") or less
1410 mm (56") or more
2
3
Product Width Number of Bracket
Bracket46.5 mm (1.8")
16.5 mm (.65")
23.5 mm
(.93")
43 mm (1.7")
5.6 mm (.22")
4.1 mm
(.16")
4.5 mm
(.18")
10 mm
(.39")
*Refer to 29 page for the Installation Dimension.
* Selectable
: Use S/M for Side Bracket type, and use M/L for Set Bar type.
Insert Side Frame Holder in a slot at intervals of 500 mm.
For Plastic Chain
Product width (W) With Side Cover: +2 mm (.08")
25.5 mm(1.0")
20.5 mm(.81")
45 mm (1.8")45 mm (1.8")
25.5 mm(1.0")
5.1 mm(.20")
5.1 mm(.20")
5.1 mm(.20")
W–46 mm (1.8")Product height (H)
11.8 mm (.46")
11.8 mm (.46")
31.5 mm (1.24")
25.5 mm(1.0")
5.1 mm(.20")
45 mm (1.8")Side HolderM: 47 mm (1.9")S: 37 mm (1.5")
Side HolderM: 90 mm (3.5")S: 70 mm (2.8")
Side HolderM: 47 mm (1.9")S: 37 mm (1.5")
42 mm(1.7")
22 mm(.87")
10 mm(.39")
20 mm (.79")
50 mm (2.0")50 mm (2.0")
Side HolderM: 90 mm (3.5")S: 70 mm (2.8")
Insert Side Frame Holder in a slot at intervals of 500 mm.
Product width (W) With Side Cover: +2 mm (.08")
25.5 mm(1.0")
5.1 mm(.20")
5.1 mm(.20")
25.5 mm(1.0")
20.5 mm(.81")
25.5 mm(1.0")
5.1 mm(.20")
W–46 mm (1.8") Product height (H)
42 mm(1.7")
48.5 mm (1.9")
50 mm (2.0") 50 mm (2.0")
Side HolderL: 100 mm (3.9")S: 80 mm (3.1")
5.1 mm(.20")
Side HolderL: 58 mm (2.3")M: 50 mm (2.0")
For Plastic Chain
50 mm (2.0")
45 mm(1.8")
Side HolderL: 58 mm (2.3")M: 50 mm (2.0") Side Holder
L: 100 mm (3.9")S: 80 mm (3.1")
45 mm (1.8") 45 mm (1.8")
Components and Materials
Aluminum
Aluminum
Steel, Molded resin
Steel, Molded resin
Steel, Molded resin
Steel, Molded resin
Molded resin
MaterialComponentsNo.
Set Bar
Roller Pipe
Spring Set
Chain Housing
SP Side Holder S/M/L
Chain Side Holder S/M/L
Side Holder Cover S/M/L
Steel, Molded resin
SUS or Brass
Molded resin
SUS or Brass
Molded resin
MaterialComponentsNo.
Bracket
Metal Ball Chain
Plastic Ball Chain
Metal Ball Chain Connector
Plastic Ball Chain Joints
Aluminum
Molded resin
Aluminum
Molded resin
Molded resin
MaterialComponentsNo.
Side Frame Base/Cover
Side Frame Cap
Weight Bar for Side Frame
Weight Bar Cap for Side Frame
Side Frame Holder
Mytec 01Mytec 01
Structure Drawing—Mytec 01 Loop / Side Frame Type (Option)
Specifications
Allowable Size
(Width: 2000 mm/79" without screen) Ex.: Spring Set F, Side Holder M, Ball Chain length is 3000 mm (118")Side Frame length is 3000 mm (118")
Maximum Screen Weight
Product Weight
Product Height (H)
Ratio (W : H)
Product Width (W)
3.7 kg
2.4 kg
(8.2 lb)
(5.3 lb)
3.2 kg
2.3 kg
(7.1 lb)
(5.1 lb)
1 : 3 (limit)
Metal Ball Chain Plastic Ball Chain
Notes: Regarding allowable size (W, H, Ratio), depending on material and weight, the screen may get wrinkled, curled or frayed. Maximum Screen Weights are different according to the screen material.
*Please use Roller Pipe 45 mm DIA for W=2,010 mm (79.1") or more.
100 mm (3.9") to 3000 mm (118")
300 mm (11.8") to 2700 mm (106") *
Product View Exploded View
Pile Tape *
Pile Tape *
Pile Tape *
Side Frame Cap
Weight Bar Cap for Side Frame
Weight Bar Cap for Side Frame
Weight Bar for Side Frame
Side Frame Cap
Side HolderCover *
Side HolderCover *
Ball Chain (Metal or Plastic)
Side Frame Holder
Side Frame Base
Side Frame Base
Pile Tape *
Side Frame Cover
Pile Tape
Side Frame Holder
Ball Chain Connector(Metal or Plastic)
Mytec 01 Loop unitBracket (For Set Bar type)
Set Bar (For Set Bar type)
14 15
Mytec 01 Loop / Side Bracket Type *Ceiling attachment only.
Mytec 01 Loop / Set Bar Type *Ceiling attachment only.
Ex. Mytec 01 Loop Side Frame type
*Set Bar type only.
1400 mm (55") or less
1410 mm (56") or more
2
3
Product Width Number of Bracket
Bracket46.5 mm (1.8")
16.5 mm (.65")
23.5 mm
(.93")
43 mm (1.7")
5.6 mm (.22")
4.1 mm
(.16")
4.5 mm
(.18")
10 mm
(.39")
*Refer to 29 page for the Installation Dimension.
* Selectable
: Use S/M for Side Bracket type, and use M/L for Set Bar type.
Insert Side Frame Holder in a slot at intervals of 500 mm.
For Plastic Chain
Product width (W) With Side Cover: +2 mm (.08")
25.5 mm(1.0")
20.5 mm(.81")
45 mm (1.8")45 mm (1.8")
25.5 mm(1.0")
5.1 mm(.20")
5.1 mm(.20")
5.1 mm(.20")
W–46 mm (1.8")Product height (H)
11.8 mm (.46")
11.8 mm (.46")
31.5 mm (1.24")
25.5 mm(1.0")
5.1 mm(.20")
45 mm (1.8")Side HolderM: 47 mm (1.9")S: 37 mm (1.5")
Side HolderM: 90 mm (3.5")S: 70 mm (2.8")
Side HolderM: 47 mm (1.9")S: 37 mm (1.5")
42 mm(1.7")
22 mm(.87")
10 mm(.39")
20 mm (.79")
50 mm (2.0")50 mm (2.0")
Side HolderM: 90 mm (3.5")S: 70 mm (2.8")
Insert Side Frame Holder in a slot at intervals of 500 mm.
Product width (W) With Side Cover: +2 mm (.08")
25.5 mm(1.0")
5.1 mm(.20")
5.1 mm(.20")
25.5 mm(1.0")
20.5 mm(.81")
25.5 mm(1.0")
5.1 mm(.20")
W–46 mm (1.8") Product height (H)
42 mm(1.7")
48.5 mm (1.9")
50 mm (2.0") 50 mm (2.0")
Side HolderL: 100 mm (3.9")S: 80 mm (3.1")
5.1 mm(.20")
Side HolderL: 58 mm (2.3")M: 50 mm (2.0")
For Plastic Chain
50 mm (2.0")
45 mm(1.8")
Side HolderL: 58 mm (2.3")M: 50 mm (2.0") Side Holder
L: 100 mm (3.9")S: 80 mm (3.1")
45 mm (1.8") 45 mm (1.8")
Top Box Base
Top Box Cap
Top Box Cap
Chain Side Holder for Top Box (Mytec 01: End Side Holder for Top Box)
SP Side Holder for Top Box
Top Box Cover
Side Frame Cap
Weight Bar Cap for Side Frame
Weight Bar for Side Frame
Pile Tape *
Side Frame Base
Side Frame Cap
Side Frame Base
Side Frame HolderSide Frame
Holder
Side Frame Cover
Side Frame Cover
Pile Tape *
Pile Tape *
Pile Tape *
Pile Tape *
Pile Tape *
Chain Housing
Top Box Ceiling Bracket *Top Box Wall Bracket *
Weight Bar Cap for Side Frame
Mytec 01 Loop unit
Ball Chain Connector(Metal or Plastic)
Ball Chain (Metal or Plastic)
Pile Tape *
Components and Materials
Aluminum
Steel, Molded resin
Steel, Molded resin
SUS or Brass
Molded resin
SUS or Brass
MaterialComponentsNo.
Roller Pipe
Spring Set
Non-Balancer Set
Metal Ball Chain
Plastic Ball Chain
Metal Ball Chain Connector
Molded resin
Aluminum
Aluminum
Steel, Molded resin
Steel, Molded resin
Molded resin
MaterialComponentsNo.
Plastic Ball Chain Joints
Top Box Base Plate
Top Box Front Cover
SP Side Holder for Top Box S/M
Chain Side Holder for Top Box S/M
Top Box Cap (L/R) S/M
SUS
Aluminum
Molded resin
Aluminum
Molded resin
Molded resin
MaterialComponentsNo.
Top Box Ceiling Bracket
Side Frame Base/Cover
Side Frame Cap
Weight Bar for Side Frame
Weight Bar Cap for Side Frame
Side Frame Holder
*Refer to 31 page for the Installation Dimension.
Top Box: S Top Box: M
Insert Side Frame Holder in a slot at intervals of 500 mm.
For Plastic Chain5.1 mm(.20")
5.1 mm(.20")
5.1 mm(.20")
5.1 mm(.20")
25.5 mm(1.0")
25.5 mm(1.0")
61.2 mm (2.4")47 mm (1.9")
22.5 mm (.89")22.5 mm (.89")
3.8 mm(.15")
3.8 mm(.15")
89.8 mm (3.5")
70.6 mm (2.8")
W–46 mm (1.8")
20.5 mm(.81")
25.5 mm(1.0")
45 mm (1.8") 45 mm (1.8")
Product height (H)
Product width (W)
20 mm (.79")
For unnecessary Spring Assist
Mytec 01Mytec 01
Structure Drawing—Mytec 01 Loop / Top Box +Side Frame Type (Option)
Specifications
Allowable Size
(Width: 2000 mm/79" without screen) Ex.: Spring Set F, Side Holder M—Ball Chain length is 3000 mm (118")Top Box M—Side Frame length is 3000 mm (118")
Maximum Screen Weight
Product Weight
Product Height (H)
Ratio (W : H)
Product Width (W)
3.7 kg
7.6 kg
(8.2 lb)
(16.7 lb)
3.2 kg
7.5 kg
(7.1 lb)
(16.5 lb)
1 : 3 (limit)
Metal Ball Chain Plastic Ball Chain
Notes: Regarding allowable size (W, H, Ratio), depending on material and weight, the screen may get wrinkled, curled or frayed. Maximum Screen Weights are different according to the screen material.
*Please use Roller Pipe 45 mm DIA for W=2,010 mm (79.1") or more.
100 mm (3.9") to 3000 mm (118")
300 mm (11.8") to 2700 mm (106") *
Product View Exploded View
1400 mm (55") or less
1410 mm (56") or more
2
3
Product Width Number of Bracket
Brackets
45.4 mm(1.8")
45.4 mm(1.8")
34.5 mm (1.4")
30.5 mm (1.2")
16 mm(.63")
27.2 mm(1.1")
58.8 mm (2.3")
57 mm (2.2")
Wall Bracket S
47.6 mm (1.9")
8.6 mm(.34")
20 mm(.79")
45.4 mm(1.8")
48.7 mm (1.9")10 mm (.39")
27.2 mm(1.1")
73 mm (2.9")
57 mm (2.2")
4.2 mm(.17")
Ceiling Bracket Wall Bracket M
45.4 mm(1.8")
30.5 mm (1.2")
16 mm(.63")
* Selectable
16 17
Mytec 01 Loop *Direct attachment is possible.
Top Box Base
Top Box Cap
Top Box Cap
Chain Side Holder for Top Box (Mytec 01: End Side Holder for Top Box)
SP Side Holder for Top Box
Top Box Cover
Side Frame Cap
Weight Bar Cap for Side Frame
Weight Bar for Side Frame
Pile Tape *
Side Frame Base
Side Frame Cap
Side Frame Base
Side Frame HolderSide Frame
Holder
Side Frame Cover
Side Frame Cover
Pile Tape *
Pile Tape *
Pile Tape *
Pile Tape *
Pile Tape *
Chain Housing
Top Box Ceiling Bracket *Top Box Wall Bracket *
Weight Bar Cap for Side Frame
Mytec 01 Loop unit
Ball Chain Connector(Metal or Plastic)
Ball Chain (Metal or Plastic)
Pile Tape *
Components and Materials
Aluminum
Steel, Molded resin
Steel, Molded resin
SUS or Brass
Molded resin
SUS or Brass
MaterialComponentsNo.
Roller Pipe
Spring Set
Non-Balancer Set
Metal Ball Chain
Plastic Ball Chain
Metal Ball Chain Connector
Molded resin
Aluminum
Aluminum
Steel, Molded resin
Steel, Molded resin
Molded resin
MaterialComponentsNo.
Plastic Ball Chain Joints
Top Box Base Plate
Top Box Front Cover
SP Side Holder for Top Box S/M
Chain Side Holder for Top Box S/M
Top Box Cap (L/R) S/M
SUS
Aluminum
Molded resin
Aluminum
Molded resin
Molded resin
MaterialComponentsNo.
Top Box Ceiling Bracket
Side Frame Base/Cover
Side Frame Cap
Weight Bar for Side Frame
Weight Bar Cap for Side Frame
Side Frame Holder
*Refer to 31 page for the Installation Dimension.
Top Box: S Top Box: M
Insert Side Frame Holder in a slot at intervals of 500 mm.
For Plastic Chain5.1 mm(.20")
5.1 mm(.20")
5.1 mm(.20")
5.1 mm(.20")
25.5 mm(1.0")
25.5 mm(1.0")
61.2 mm (2.4")47 mm (1.9")
22.5 mm (.89")22.5 mm (.89")
3.8 mm(.15")
3.8 mm(.15")
89.8 mm (3.5")
70.6 mm (2.8")
W–46 mm (1.8")
20.5 mm(.81")
25.5 mm(1.0")
45 mm (1.8") 45 mm (1.8")
Product height (H)
Product width (W)
20 mm (.79")
For unnecessary Spring Assist
Mytec 01Mytec 01
Structure Drawing—Mytec 01 Loop / Top Box +Side Frame Type (Option)
Specifications
Allowable Size
(Width: 2000 mm/79" without screen) Ex.: Spring Set F, Side Holder M—Ball Chain length is 3000 mm (118")Top Box M—Side Frame length is 3000 mm (118")
Maximum Screen Weight
Product Weight
Product Height (H)
Ratio (W : H)
Product Width (W)
3.7 kg
7.6 kg
(8.2 lb)
(16.7 lb)
3.2 kg
7.5 kg
(7.1 lb)
(16.5 lb)
1 : 3 (limit)
Metal Ball Chain Plastic Ball Chain
Notes: Regarding allowable size (W, H, Ratio), depending on material and weight, the screen may get wrinkled, curled or frayed. Maximum Screen Weights are different according to the screen material.
*Please use Roller Pipe 45 mm DIA for W=2,010 mm (79.1") or more.
100 mm (3.9") to 3000 mm (118")
300 mm (11.8") to 2700 mm (106") *
Product View Exploded View
1400 mm (55") or less
1410 mm (56") or more
2
3
Product Width Number of Bracket
Brackets
45.4 mm(1.8")
45.4 mm(1.8")
34.5 mm (1.4")
30.5 mm (1.2")
16 mm(.63")
27.2 mm(1.1")
58.8 mm (2.3")
57 mm (2.2")
Wall Bracket S
47.6 mm (1.9")
8.6 mm(.34")
20 mm(.79")
45.4 mm(1.8")
48.7 mm (1.9")10 mm (.39")
27.2 mm(1.1")
73 mm (2.9")
57 mm (2.2")
4.2 mm(.17")
Ceiling Bracket Wall Bracket M
45.4 mm(1.8")
30.5 mm (1.2")
16 mm(.63")
* Selectable
16 17
Mytec 01 Loop *Direct attachment is possible.
Components and Materials
Aluminum
Aluminum
Steel, Molded resin
Steel, Molded resin
Steel, Molded resin
Steel, Molded resin
Molded resin
SUS or Brass
MaterialComponentsNo.
Set Bar
Roller Pipe
Spring Set
Chain Housing
SP Side Holder S/M/L
Chain Side Holder S/M/L
Side Holder Cover S/M/L
Metal Ball Chain
Molded resin
SUS or Brass
Molded resin
Aluminum
Molded resin
Nylon or Steel
Molded resin
Molded resin
MaterialComponentsNo.
Plastic Ball Chain
Metal Ball Chain Connector
Plastic Ball Chain Joints
MT03 Weight Bar
Wire Stop
Wire
Wire Base
Weight Bar Cap for Guide Wire
Molded resin
Molded resin
Steel, Molded resin
Molded resin
Molded resin
Molded resin
Molded resin
MaterialComponentsNo.
Clutch
Speed Controller
End Side Holder S/M/L
MT03 Pull Ball Set
MT03 Pull Grip Set
MT03 Flat Grip Set
Pipe End
* Selectable
25 mm(.98")
25 mm(.98")
For Plastic Chain
10 mm(.39")
22 mm (.87")
10 mm(.39")
42 mm(1.7")
22 mm(.87")
Side HolderM: 47 mm (1.9")S: 37 mm (1.5")
Side HolderM: 47 mm (1.9")S: 37 mm (1.5")
Side HolderM: 47 mm (1.9")S: 37 mm (1.5")
45 mm(1.8")
Side HolderM: 47 mm (1.9")S: 37 mm (1.5")
Product height (H)
13 mm (.51")
9 mm (.35")
10.9 mm (.43")31.5 mm (1.24")
8.4 mm (.33")
42 mm (1.7")
W–41 mm (1.6") 21 mm (.82")18 mm (.71")9.9 mm (.39") 9.9 mm (.39")
Product width (W) With Side Cover: +2 mm (.08")
15.3 mm (.60")
Side Bracket Type
For Set Bar type11.8 mm (.46")
11.8 mm (.46")
20 mm (.79")(For M size)
20 mm (.79")(For M size)
Product width (W) With Side Cover: +2 mm (.08")
Product height (H)
W–38 mm (1.5")
15.3 mm (.60")
11.8 mm (.46")
11.8 mm (.46")
25 mm (.98")13 mm
(.51")
9 mm (.35")
45 mm (1.8")
25 mm(.98")
31.5 mm (1.24")10.9 mm (.43")
8.4 mm (.33")
Side HolderM: 47 mm (1.9")S: 37 mm (1.5")
Side HolderM: 47 mm (1.9")S: 37 mm (1.5")
Side HolderM: 47 mm (1.9")S: 37 mm (1.5")
Side HolderM: 47 mm (1.9")S: 37 mm (1.5")
10 mm(.39")
22 mm (.87")
22 mm (.87")
20 mm (.79")(For M size)
42 mm (1.7")
10 mm(.39")
20 mm (.79")(For M size)
42 mm (1.7")
Side Bracket Type
For Set Bar type
18 mm (.71") 18 mm (.71")
Mytec 01Mytec 01
Structure Drawing—Mytec 01 Loop / Guide Wire Type (Option)
Specifications
Allowable Size
Maximum Screen Weight
Product Weight
Product Height (H)
Ratio (W : H)
Product Width (W)
(Width: 2000 mm/79" without screen) Ex.: Spring Set F, Side Holder M—Ball Chain length is 3000 mm (118")
(Width: 2000 mm/79" without screen) Ex.: Spring Set F, Side Holder M,
1.9 kg (4.2 lb) 2.3 kg (5.1 lb) 1.9 kg (4.2 lb) 2.3 kg (5.1 lb)1.8 kg (4.0 lb) 2.2 kg (4.9 lb)
3.7 kg (8.2 lb) 3.2 kg (7.1 lb) 1.8 kg (4.0 lb)
1 : 3 (limit)
100 mm (3.9") to 3000 mm (118")
1 : 3 (limit)
100 mm (3.9") to 3000 mm (118")
Side Bracket Type Set Bar Type Side Bracket Type Side Bracket Type
Mytec 01 Loop (Metal Ball Chain) Mytec 01 Loop (Plastic Ball Chain) Mytec 01 (Spring Drive System)
Set Bar Type Set Bar Type
Notes: Regarding allowable size (W, H, Ratio), depending on material and weight, the screen may get wrinkled, curled or frayed. Maximum Screen Weights are different according to the screen material.
*1 Please use Roller Pipe 45 mm DIA for W=2,010 mm (79.1") or more.
*2 Minimum width is 600 mm (23.6") at Stop Controller using. (Depend on the screen.)
300 mm (11.8") to 2700 mm (106") *1 *2 300 mm (11.8") to 2000 mm (78.7")
Product View Exploded View
SP Side Holder
Side Holder Cover *
Chain Side Holder
Wire (Steel or Nylon)
Wire Base
Weight Bar Cap for Guide Wire
MT03 Weight Bar
Wire Stop
Wire Stop
Side Holder Cover *
Set Bar (For Set Bar type)
Bracket (For Set Bar type)
Ball Chain (Metal or Plastic)
Ball Chain Connector(Metal or Plastic)
Chain Housing
Mytec 01 Loop / Mytec 01 unit
18 19
Mytec 01 Loop
Mytec 01
Ex. Mytec 01 Loop Guide Wire type
*Set Bar type only.
1400 mm (55") or less
1410 mm (56") or more
2
3
Product Width Number of Bracket
Bracket46.5 mm (1.8")
16.5 mm (.65")
23.5 mm
(.93")
43 mm (1.7")
5.6 mm (.22")
4.1 mm
(.16")
4.5 mm
(.18")
10 mm
(.39")
Weight Bar
Non wrapping type Wrapping type
*Refer to 29 page for the Installation Dimension.
: Use S/M for Side Bracket type, and use M/L for Set Bar type.
Components and Materials
Aluminum
Aluminum
Steel, Molded resin
Steel, Molded resin
Steel, Molded resin
Steel, Molded resin
Molded resin
SUS or Brass
MaterialComponentsNo.
Set Bar
Roller Pipe
Spring Set
Chain Housing
SP Side Holder S/M/L
Chain Side Holder S/M/L
Side Holder Cover S/M/L
Metal Ball Chain
Molded resin
SUS or Brass
Molded resin
Aluminum
Molded resin
Nylon or Steel
Molded resin
Molded resin
MaterialComponentsNo.
Plastic Ball Chain
Metal Ball Chain Connector
Plastic Ball Chain Joints
MT03 Weight Bar
Wire Stop
Wire
Wire Base
Weight Bar Cap for Guide Wire
Molded resin
Molded resin
Steel, Molded resin
Molded resin
Molded resin
Molded resin
Molded resin
MaterialComponentsNo.
Clutch
Speed Controller
End Side Holder S/M/L
MT03 Pull Ball Set
MT03 Pull Grip Set
MT03 Flat Grip Set
Pipe End
* Selectable
25 mm(.98")
25 mm(.98")
For Plastic Chain
10 mm(.39")
22 mm (.87")
10 mm(.39")
42 mm(1.7")
22 mm(.87")
Side HolderM: 47 mm (1.9")S: 37 mm (1.5")
Side HolderM: 47 mm (1.9")S: 37 mm (1.5")
Side HolderM: 47 mm (1.9")S: 37 mm (1.5")
45 mm(1.8")
Side HolderM: 47 mm (1.9")S: 37 mm (1.5")
Product height (H)
13 mm (.51")
9 mm (.35")
10.9 mm (.43")31.5 mm (1.24")
8.4 mm (.33")
42 mm (1.7")
W–41 mm (1.6") 21 mm (.82")18 mm (.71")9.9 mm (.39") 9.9 mm (.39")
Product width (W) With Side Cover: +2 mm (.08")
15.3 mm (.60")
Side Bracket Type
For Set Bar type11.8 mm (.46")
11.8 mm (.46")
20 mm (.79")(For M size)
20 mm (.79")(For M size)
Product width (W) With Side Cover: +2 mm (.08")
Product height (H)
W–38 mm (1.5")
15.3 mm (.60")
11.8 mm (.46")
11.8 mm (.46")
25 mm (.98")13 mm
(.51")
9 mm (.35")
45 mm (1.8")
25 mm(.98")
31.5 mm (1.24")10.9 mm (.43")
8.4 mm (.33")
Side HolderM: 47 mm (1.9")S: 37 mm (1.5")
Side HolderM: 47 mm (1.9")S: 37 mm (1.5")
Side HolderM: 47 mm (1.9")S: 37 mm (1.5")
Side HolderM: 47 mm (1.9")S: 37 mm (1.5")
10 mm(.39")
22 mm (.87")
22 mm (.87")
20 mm (.79")(For M size)
42 mm (1.7")
10 mm(.39")
20 mm (.79")(For M size)
42 mm (1.7")
Side Bracket Type
For Set Bar type
18 mm (.71") 18 mm (.71")
Mytec 01Mytec 01
Structure Drawing—Mytec 01 Loop / Guide Wire Type (Option)
Specifications
Allowable Size
Maximum Screen Weight
Product Weight
Product Height (H)
Ratio (W : H)
Product Width (W)
(Width: 2000 mm/79" without screen) Ex.: Spring Set F, Side Holder M—Ball Chain length is 3000 mm (118")
(Width: 2000 mm/79" without screen) Ex.: Spring Set F, Side Holder M,
1.9 kg (4.2 lb) 2.3 kg (5.1 lb) 1.9 kg (4.2 lb) 2.3 kg (5.1 lb)1.8 kg (4.0 lb) 2.2 kg (4.9 lb)
3.7 kg (8.2 lb) 3.2 kg (7.1 lb) 1.8 kg (4.0 lb)
1 : 3 (limit)
100 mm (3.9") to 3000 mm (118")
1 : 3 (limit)
100 mm (3.9") to 3000 mm (118")
Side Bracket Type Set Bar Type Side Bracket Type Side Bracket Type
Mytec 01 Loop (Metal Ball Chain) Mytec 01 Loop (Plastic Ball Chain) Mytec 01 (Spring Drive System)
Set Bar Type Set Bar Type
Notes: Regarding allowable size (W, H, Ratio), depending on material and weight, the screen may get wrinkled, curled or frayed. Maximum Screen Weights are different according to the screen material.
*1 Please use Roller Pipe 45 mm DIA for W=2,010 mm (79.1") or more.
*2 Minimum width is 600 mm (23.6") at Stop Controller using. (Depend on the screen.)
300 mm (11.8") to 2700 mm (106") *1 *2 300 mm (11.8") to 2000 mm (78.7")
Product View Exploded View
SP Side Holder
Side Holder Cover *
Chain Side Holder
Wire (Steel or Nylon)
Wire Base
Weight Bar Cap for Guide Wire
MT03 Weight Bar
Wire Stop
Wire Stop
Side Holder Cover *
Set Bar (For Set Bar type)
Bracket (For Set Bar type)
Ball Chain (Metal or Plastic)
Ball Chain Connector(Metal or Plastic)
Chain Housing
Mytec 01 Loop / Mytec 01 unit
18 19
Mytec 01 Loop
Mytec 01
Ex. Mytec 01 Loop Guide Wire type
*Set Bar type only.
1400 mm (55") or less
1410 mm (56") or more
2
3
Product Width Number of Bracket
Bracket46.5 mm (1.8")
16.5 mm (.65")
23.5 mm
(.93")
43 mm (1.7")
5.6 mm (.22")
4.1 mm
(.16")
4.5 mm
(.18")
10 mm
(.39")
Weight Bar
Non wrapping type Wrapping type
*Refer to 29 page for the Installation Dimension.
: Use S/M for Side Bracket type, and use M/L for Set Bar type.
* Selectable
Top Box Base
Wire Stop
Wire Stop
Wire (Steel or Nylon)
Wire Base
SP Side Holder for Top Box
Top Box Cap
Top Box Cap
Top Box Cover
Chain Side Holder for Top Box (Mytec 01: End Side Holder for Top Boxor SC Side Holder for Top Box)
Weight Bar Cap for Guide Wire
MT03 Weight Bar
Top Box Ceiling Bracket *Top Box Wall Bracket *
Mytec 01 Loop / Mytec 01 unit
Chain Housing
Ball Chain Connector(Metal or Plastic)
Ball Chain (Metal or Plastic)
Pile Tape *
Components and Materials
Aluminum
Steel, Molded resin
SUS or Brass
Molded resin
SUS or Brass
Molded resin
Aluminum
Aluminum
Aluminum
MaterialComponentsNo.
Roller Pipe
Spring Set
Metal Ball Chain
Plastic Ball Chain
Metal Ball Chain Connector
Plastic Ball Chain Joints
MT03 Weight Bar
Top Box Base Plate
Top Box Front Cover
Steel, Molded resin
Steel, Molded resin
Molded resin
SUS
Nylon or Steel
Molded resin
Molded resin
Molded resin
MaterialComponentsNo.
SP Side Holder for Top Box S/M
Chain Side Holder for Top Box S/M
Top Box Cap (L/R) S/M
Top Box Ceiling Bracket
Wire
Weight Bar Cap for Guide Wire
Clutch
Speed Controller
Molded resin
Molded resin
Molded resin
Molded resin
Molded resin
Molded resin
Molded resin
Molded resin
MaterialComponentsNo.
Pipe End
Stop Controller
MT03 Pull Ball Set
MT03 Pull Grip Set
MT03 Flat Grip Set
SC Side Holder for Top Box S/M
End Side Holder for Top Box S/M
Wire Base
Product height (H)
Product width (W) With Side Cover: +2 mm (.08")
24.5 mm (.96")W–46 mm (1.8")
Top Box: S Top Box: M
Top Box: S Top Box: M
For Plastic Chain
20 mm (.79")57 mm (2.2")
22.5 mm (.89")22.5 mm (.89")47 mm (1.9")
70.6 mm (2.8")
89.8 mm (3.5")
89.8 mm (3.5")
70.6 mm (2.8")
22.5 mm (.89")22.5 mm (.89")
3.8 mm(.15")
5.4 mm(.21")
5.4 mm(.21")
3.8 mm(.15")
3.8 mm(.15")3.8 mm
(.15")
47 mm (1.9")
70.6 mm (2.8")
70.6 mm (2.8")
71.2 mm (2.8")
89.8 mm (3.5")
89.8 mm (3.5")
71.2 mm (2.8")
61.2 mm (2.4")
10 mm(.39")
10 mm(.39")
57 mm (2.2")
10 mm(.39")
10 mm(.39")
10 mm(.39")
21.5 mm (.85")W–43 mm (1.7")
20 mm (.79")
10 mm(.39")
Product width (W)
5.4 mm(.21")5.4 mm
(.21")
61.2 mm (2.4")
15.3 mm (.60")
18 mm (.71")
9.9 mm (.39")
25 mm (.98")
25 mm(.98")
25 mm (.98")
25 mm(.98")
Product height (H)
15.3 mm (.60")
Option (with Stop Controller *2)
21.5 mm (.85")
10.9 mm (.43")
8.4 mm (.33")
10.9 mm (.43")
8.4 mm (.33")
10.9 mm (.43")
8.4 mm (.33")
10.9 mm (.43")
8.4 mm (.33")
Ex. Mytec 01 Loop Side Bracket type
Product height (H)
Product width (W) With Side Cover: +2 mm (.08")
24.5 mm (.96")W–46 mm (1.8")
Top Box: S Top Box: M
Top Box: S Top Box: M
For Plastic Chain
20 mm (.79")57 mm (2.2")
22.5 mm (.89")22.5 mm (.89")47 mm (1.9")
70.6 mm (2.8")
89.8 mm (3.5")
89.8 mm (3.5")
70.6 mm (2.8")
22.5 mm (.89")22.5 mm (.89")
3.8 mm(.15")
5.4 mm(.21")
5.4 mm(.21")
3.8 mm(.15")
3.8 mm(.15")3.8 mm
(.15")
47 mm (1.9")
70.6 mm (2.8")
70.6 mm (2.8")
71.2 mm (2.8")
89.8 mm (3.5")
89.8 mm (3.5")
71.2 mm (2.8")
61.2 mm (2.4")
10 mm(.39")
10 mm(.39")
57 mm (2.2")
10 mm(.39")
10 mm(.39")
10 mm(.39")
21.5 mm (.85")W–43 mm (1.7")
20 mm (.79")
10 mm(.39")
Product width (W)
5.4 mm(.21")5.4 mm
(.21")
61.2 mm (2.4")
15.3 mm (.60")
18 mm (.71")
9.9 mm (.39")
25 mm (.98")
25 mm(.98")
25 mm (.98")
25 mm(.98")
Product height (H)
15.3 mm (.60")
Option (with Stop Controller *2)
21.5 mm (.85")
10.9 mm (.43")
8.4 mm (.33")
10.9 mm (.43")
8.4 mm (.33")
10.9 mm (.43")
8.4 mm (.33")
10.9 mm (.43")
8.4 mm (.33")
Mytec 01Mytec 01
Structure Drawing—Mytec 01 Loop / Top Box + Guide Wire (Option)
Weight Bar
Non wrappingtype
Wrappingtype
Specifications
Notes: Regarding allowable size (W, H, Ratio), depending on material and weight, the screen may get wrinkled, curled or frayed. Maximum Screen Weights are different according to the screen material.
*1 Please use Roller Pipe 45 mm DIA for W=2,010 mm (79.1") or more.
*2 Minimum width is 600 mm (23.6") at Stop Controller using. (Depend on the screen.)
Product View Exploded View
1400 mm (55") or less
1410 mm (56") or more
2
3
Product Width Number of Bracket
Brackets
45.4 mm(1.8")
45.4 mm(1.8")
34.5 mm (1.4")
30.5 mm (1.2")
16 mm(.63")
27.2 mm(1.1")
58.8 mm (2.3")
57 mm (2.2")
Wall Bracket S
47.6 mm (1.9")
8.6 mm(.34")
20 mm(.79")
45.4 mm(1.8")
48.7 mm (1.9")10 mm (.39")
27.2 mm(1.1")
73 mm (2.9")
57 mm (2.2")
4.2 mm(.17")
Ceiling Bracket Wall Bracket M
45.4 mm(1.8")
30.5 mm (1.2")
16 mm(.63")
20 21
Mytec 01 Loop
Mytec 01
*Refer to 31 page for the Installation Dimension.
Allowable Size
(Width: 2000 mm/79" without screen) Ex.: Spring Set F, Side Holder M—Ball Chain length is 3000 mm (118"), Top Box M
(Width: 2000 mm/79" without screen) Ex.: Spring Set F, Side Holder M, Top Box M
Maximum Screen Weight
Product Weight
Product Height (H)
Ratio (W : H)
Product Width (W)
3.7 kg
5.2 kg
(8.2 lb)
(11.4 lb)
1.8 kg
5.2 kg
(4.0 lb)
(11.4 lb)
3.2 kg
5.0 kg
(7.1 lb)
(11.0 lb)
1 : 3 (limit)
Metal Ball Chain Plastic Ball Chain Mytec 01 (Spring Drive System)
100 mm (3.9") to 3000 mm (118")
300 mm (11.8") to 2700 mm (106") *1 *2 300 mm (11.8") to 2000 mm (78.7")
* Selectable
Top Box Base
Wire Stop
Wire Stop
Wire (Steel or Nylon)
Wire Base
SP Side Holder for Top Box
Top Box Cap
Top Box Cap
Top Box Cover
Chain Side Holder for Top Box (Mytec 01: End Side Holder for Top Boxor SC Side Holder for Top Box)
Weight Bar Cap for Guide Wire
MT03 Weight Bar
Top Box Ceiling Bracket *Top Box Wall Bracket *
Mytec 01 Loop / Mytec 01 unit
Chain Housing
Ball Chain Connector(Metal or Plastic)
Ball Chain (Metal or Plastic)
Pile Tape *
Components and Materials
Aluminum
Steel, Molded resin
SUS or Brass
Molded resin
SUS or Brass
Molded resin
Aluminum
Aluminum
Aluminum
MaterialComponentsNo.
Roller Pipe
Spring Set
Metal Ball Chain
Plastic Ball Chain
Metal Ball Chain Connector
Plastic Ball Chain Joints
MT03 Weight Bar
Top Box Base Plate
Top Box Front Cover
Steel, Molded resin
Steel, Molded resin
Molded resin
SUS
Nylon or Steel
Molded resin
Molded resin
Molded resin
MaterialComponentsNo.
SP Side Holder for Top Box S/M
Chain Side Holder for Top Box S/M
Top Box Cap (L/R) S/M
Top Box Ceiling Bracket
Wire
Weight Bar Cap for Guide Wire
Clutch
Speed Controller
Molded resin
Molded resin
Molded resin
Molded resin
Molded resin
Molded resin
Molded resin
Molded resin
MaterialComponentsNo.
Pipe End
Stop Controller
MT03 Pull Ball Set
MT03 Pull Grip Set
MT03 Flat Grip Set
SC Side Holder for Top Box S/M
End Side Holder for Top Box S/M
Wire Base
Product height (H)
Product width (W) With Side Cover: +2 mm (.08")
24.5 mm (.96")W–46 mm (1.8")
Top Box: S Top Box: M
Top Box: S Top Box: M
For Plastic Chain
20 mm (.79")57 mm (2.2")
22.5 mm (.89")22.5 mm (.89")47 mm (1.9")
70.6 mm (2.8")
89.8 mm (3.5")
89.8 mm (3.5")
70.6 mm (2.8")
22.5 mm (.89")22.5 mm (.89")
3.8 mm(.15")
5.4 mm(.21")
5.4 mm(.21")
3.8 mm(.15")
3.8 mm(.15")3.8 mm
(.15")
47 mm (1.9")
70.6 mm (2.8")
70.6 mm (2.8")
71.2 mm (2.8")
89.8 mm (3.5")
89.8 mm (3.5")
71.2 mm (2.8")
61.2 mm (2.4")
10 mm(.39")
10 mm(.39")
57 mm (2.2")
10 mm(.39")
10 mm(.39")
10 mm(.39")
21.5 mm (.85")W–43 mm (1.7")
20 mm (.79")
10 mm(.39")
Product width (W)
5.4 mm(.21")5.4 mm
(.21")
61.2 mm (2.4")
15.3 mm (.60")
18 mm (.71")
9.9 mm (.39")
25 mm (.98")
25 mm(.98")
25 mm (.98")
25 mm(.98")
Product height (H)
15.3 mm (.60")
Option (with Stop Controller *2)
21.5 mm (.85")
10.9 mm (.43")
8.4 mm (.33")
10.9 mm (.43")
8.4 mm (.33")
10.9 mm (.43")
8.4 mm (.33")
10.9 mm (.43")
8.4 mm (.33")
Ex. Mytec 01 Loop Side Bracket type
Product height (H)
Product width (W) With Side Cover: +2 mm (.08")
24.5 mm (.96")W–46 mm (1.8")
Top Box: S Top Box: M
Top Box: S Top Box: M
For Plastic Chain
20 mm (.79")57 mm (2.2")
22.5 mm (.89")22.5 mm (.89")47 mm (1.9")
70.6 mm (2.8")
89.8 mm (3.5")
89.8 mm (3.5")
70.6 mm (2.8")
22.5 mm (.89")22.5 mm (.89")
3.8 mm(.15")
5.4 mm(.21")
5.4 mm(.21")
3.8 mm(.15")
3.8 mm(.15")3.8 mm
(.15")
47 mm (1.9")
70.6 mm (2.8")
70.6 mm (2.8")
71.2 mm (2.8")
89.8 mm (3.5")
89.8 mm (3.5")
71.2 mm (2.8")
61.2 mm (2.4")
10 mm(.39")
10 mm(.39")
57 mm (2.2")
10 mm(.39")
10 mm(.39")
10 mm(.39")
21.5 mm (.85")W–43 mm (1.7")
20 mm (.79")
10 mm(.39")
Product width (W)
5.4 mm(.21")5.4 mm
(.21")
61.2 mm (2.4")
15.3 mm (.60")
18 mm (.71")
9.9 mm (.39")
25 mm (.98")
25 mm(.98")
25 mm (.98")
25 mm(.98")
Product height (H)
15.3 mm (.60")
Option (with Stop Controller *2)
21.5 mm (.85")
10.9 mm (.43")
8.4 mm (.33")
10.9 mm (.43")
8.4 mm (.33")
10.9 mm (.43")
8.4 mm (.33")
10.9 mm (.43")
8.4 mm (.33")
Mytec 01Mytec 01
Structure Drawing—Mytec 01 Loop / Top Box + Guide Wire (Option)
Weight Bar
Non wrappingtype
Wrappingtype
Specifications
Notes: Regarding allowable size (W, H, Ratio), depending on material and weight, the screen may get wrinkled, curled or frayed. Maximum Screen Weights are different according to the screen material.
*1 Please use Roller Pipe 45 mm DIA for W=2,010 mm (79.1") or more.
*2 Minimum width is 600 mm (23.6") at Stop Controller using. (Depend on the screen.)
Product View Exploded View
1400 mm (55") or less
1410 mm (56") or more
2
3
Product Width Number of Bracket
Brackets
45.4 mm(1.8")
45.4 mm(1.8")
34.5 mm (1.4")
30.5 mm (1.2")
16 mm(.63")
27.2 mm(1.1")
58.8 mm (2.3")
57 mm (2.2")
Wall Bracket S
47.6 mm (1.9")
8.6 mm(.34")
20 mm(.79")
45.4 mm(1.8")
48.7 mm (1.9")10 mm (.39")
27.2 mm(1.1")
73 mm (2.9")
57 mm (2.2")
4.2 mm(.17")
Ceiling Bracket Wall Bracket M
45.4 mm(1.8")
30.5 mm (1.2")
16 mm(.63")
20 21
Mytec 01 Loop
Mytec 01
*Refer to 31 page for the Installation Dimension.
Allowable Size
(Width: 2000 mm/79" without screen) Ex.: Spring Set F, Side Holder M—Ball Chain length is 3000 mm (118"), Top Box M
(Width: 2000 mm/79" without screen) Ex.: Spring Set F, Side Holder M, Top Box M
Maximum Screen Weight
Product Weight
Product Height (H)
Ratio (W : H)
Product Width (W)
3.7 kg
5.2 kg
(8.2 lb)
(11.4 lb)
1.8 kg
5.2 kg
(4.0 lb)
(11.4 lb)
3.2 kg
5.0 kg
(7.1 lb)
(11.0 lb)
1 : 3 (limit)
Metal Ball Chain Plastic Ball Chain Mytec 01 (Spring Drive System)
100 mm (3.9") to 3000 mm (118")
300 mm (11.8") to 2700 mm (106") *1 *2 300 mm (11.8") to 2000 mm (78.7")
Side HolderM: 47 mm (1.9")S: 37 mm (1.5")
Side HolderM: 47 mm (1.9")S: 37 mm (1.5")
Side HolderM: 47 mm (1.9")S: 37 mm (1.5")
Side HolderM: 47 mm (1.9")S: 37 mm (1.5")
Product width (W) With Side Cover: +2 mm (.08")
11.8 mm (.46")11.8 mm (.46")
31.5 mm (1.2")31.5 mm (1.2")
31.5 mm (1.2")
Product height (H)16 mm (.63") 21 mm (.83")
W2–29 mm (1.1")
W2 W1
W1–34 mm (1.3")
10 mm(.39")
10 mm(.39")
22 mm (.87")
20 mm (.79")(For M size)
20 mm (.79")(For M size)
26 mm (1.0")
4 mm (.16") 4 mm (.16")
45 mm(1.8")
42 mm(1.7")
22 mm(.87")
Side HolderM: 47 mm (1.9")S: 37 mm (1.5")
Side HolderM: 47 mm (1.9")S: 37 mm (1.5")
Side HolderM: 47 mm (1.9")S: 37 mm (1.5")
Side HolderM: 47 mm (1.9")S: 37 mm (1.5")
Product width (W) With Side Cover: +2 mm (.08")
31.5 mm (1.2")
31.5 mm (1.2")
31.5 mm (1.2")
31.5 mm (1.2")
16 mm (.63") 21 mm (.83")
W1W2W3
W1–34 mm (1.3")W2–26 mm (1.0")W1–29 mm (1.1")
10 mm(.39")
10 mm(.39")
22 mm (.87")
26 mm (1.0") 26 mm (1.0")
4 mm (.16") 4 mm (.16") 4 mm (.16")
11.8 mm (.46")11.8 mm (.46")
Product height (H)
45 mm(1.8")
42 mm(1.7")
22 mm(.87")
20 mm (.79")(For M size)
20 mm (.79")(For M size)
2 Units Link 3 Units Link
Side Holder Cover *
Side Holder Cover *
Mytec 01 Loop unit
Mytec 01 Loop unit
Link Bracket
Link Joint Pin
SP Side Holder
Roller Pipe with Spring Set
Roller Pipe with Chain Housing
Structure for Link Bracket and Link Joint Pin
1. Remove the cover for link position.
2. Insert the Link Joint Pin
3. Set the cover for link position.Link Joint Pin Link Bracket
Link Joint Pipe End
Metal Ball Chain
Metal Ball Chain Connector
Chain Side Holder
*Metal Ball Chain only.
Components and Materials
Aluminum
Steel, Molded resin
Steel, Molded resin
Steel, Molded resin
Steel, Molded resin
MaterialComponentsNo.
Roller Pipe
Spring Set
Chain Housing
SP Side Holder S/M
Chain Side Holder S/M
Molded resin
SUS or Brass
SUS or Brass
Aluminum
MaterialComponentsNo.
Side Holder Cover S/M
Metal Ball Chain
Metal Ball Chain Connector
MT03 Weight Bar
Molded resin
Steel, Molded resin
Molded resin
Brass
MaterialComponentsNo.
MT03 Weight Bar Cap
Link Bracket S/M
Link Joint Pipe End
Link Joint Pin
Mytec 01Mytec 01
Structure Drawing—Mytec 01 Loop / Link Type (Option)Product View Exploded View
1500 mm (59.1") to 4500 mm (177")W1, W2, W3 1500 mm (59.1")
1000 mm (39.3") to 5000 mm (197")W1, W2 2500 mm (98.4") *
Allowable for Roller Pipe 41 mm DIA
Specifications
Allowable Size
(Width: 2000 mm/79" without screen) Ex.: Spring Set F, Side Holder M, Metal Ball Chain length is 3000 mm (118")
Maximum Screen Weight
Product Weight
Product Height (H)
Ratio (W : H)
Product Width (W)
2.1 kg (4.6 lb)
5.1 kg (11.2 lb)
2.0 kg (4.4 lb)
5.7 kg (12.5 lb)
1 : 3 (limit)
100 mm (3.9") to 2500 mm (98.4")
2 Units Link 3 Units Link
Notes: Regarding allowable size (W, H, Ratio), depending on material and weight, the screen may get wrinkled, curled or frayed. Maximum Screen Weights are different according to the screen material.
*Please use Roller Pipe 45 mm DIA for W=2,010 mm (79.1") or more by 2 Unit Link.
Weight Bar
Non wrappingtype
Wrappingtype
22 23
Side Bracket Type / 2 Units Link
Side Bracket Type / 3 Units Link
*Refer to 29 page for the Installation Dimension. * Selectable
Side HolderM: 47 mm (1.9")S: 37 mm (1.5")
Side HolderM: 47 mm (1.9")S: 37 mm (1.5")
Side HolderM: 47 mm (1.9")S: 37 mm (1.5")
Side HolderM: 47 mm (1.9")S: 37 mm (1.5")
Product width (W) With Side Cover: +2 mm (.08")
11.8 mm (.46")11.8 mm (.46")
31.5 mm (1.2")31.5 mm (1.2")
31.5 mm (1.2")
Product height (H)16 mm (.63") 21 mm (.83")
W2–29 mm (1.1")
W2 W1
W1–34 mm (1.3")
10 mm(.39")
10 mm(.39")
22 mm (.87")
20 mm (.79")(For M size)
20 mm (.79")(For M size)
26 mm (1.0")
4 mm (.16") 4 mm (.16")
45 mm(1.8")
42 mm(1.7")
22 mm(.87")
Side HolderM: 47 mm (1.9")S: 37 mm (1.5")
Side HolderM: 47 mm (1.9")S: 37 mm (1.5")
Side HolderM: 47 mm (1.9")S: 37 mm (1.5")
Side HolderM: 47 mm (1.9")S: 37 mm (1.5")
Product width (W) With Side Cover: +2 mm (.08")
31.5 mm (1.2")
31.5 mm (1.2")
31.5 mm (1.2")
31.5 mm (1.2")
16 mm (.63") 21 mm (.83")
W1W2W3
W1–34 mm (1.3")W2–26 mm (1.0")W1–29 mm (1.1")
10 mm(.39")
10 mm(.39")
22 mm (.87")
26 mm (1.0") 26 mm (1.0")
4 mm (.16") 4 mm (.16") 4 mm (.16")
11.8 mm (.46")11.8 mm (.46")
Product height (H)
45 mm(1.8")
42 mm(1.7")
22 mm(.87")
20 mm (.79")(For M size)
20 mm (.79")(For M size)
2 Units Link 3 Units Link
Side Holder Cover *
Side Holder Cover *
Mytec 01 Loop unit
Mytec 01 Loop unit
Link Bracket
Link Joint Pin
SP Side Holder
Roller Pipe with Spring Set
Roller Pipe with Chain Housing
Structure for Link Bracket and Link Joint Pin
1. Remove the cover for link position.
2. Insert the Link Joint Pin
3. Set the cover for link position.Link Joint Pin Link Bracket
Link Joint Pipe End
Metal Ball Chain
Metal Ball Chain Connector
Chain Side Holder
*Metal Ball Chain only.
Components and Materials
Aluminum
Steel, Molded resin
Steel, Molded resin
Steel, Molded resin
Steel, Molded resin
MaterialComponentsNo.
Roller Pipe
Spring Set
Chain Housing
SP Side Holder S/M
Chain Side Holder S/M
Molded resin
SUS or Brass
SUS or Brass
Aluminum
MaterialComponentsNo.
Side Holder Cover S/M
Metal Ball Chain
Metal Ball Chain Connector
MT03 Weight Bar
Molded resin
Steel, Molded resin
Molded resin
Brass
MaterialComponentsNo.
MT03 Weight Bar Cap
Link Bracket S/M
Link Joint Pipe End
Link Joint Pin
Mytec 01Mytec 01
Structure Drawing—Mytec 01 Loop / Link Type (Option)Product View Exploded View
1500 mm (59.1") to 4500 mm (177")W1, W2, W3 1500 mm (59.1")
1000 mm (39.3") to 5000 mm (197")W1, W2 2500 mm (98.4") *
Allowable for Roller Pipe 41 mm DIA
Specifications
Allowable Size
(Width: 2000 mm/79" without screen) Ex.: Spring Set F, Side Holder M, Metal Ball Chain length is 3000 mm (118")
Maximum Screen Weight
Product Weight
Product Height (H)
Ratio (W : H)
Product Width (W)
2.1 kg (4.6 lb)
5.1 kg (11.2 lb)
2.0 kg (4.4 lb)
5.7 kg (12.5 lb)
1 : 3 (limit)
100 mm (3.9") to 2500 mm (98.4")
2 Units Link 3 Units Link
Notes: Regarding allowable size (W, H, Ratio), depending on material and weight, the screen may get wrinkled, curled or frayed. Maximum Screen Weights are different according to the screen material.
*Please use Roller Pipe 45 mm DIA for W=2,010 mm (79.1") or more by 2 Unit Link.
Weight Bar
Non wrappingtype
Wrappingtype
22 23
Side Bracket Type / 2 Units Link
Side Bracket Type / 3 Units Link
*Refer to 29 page for the Installation Dimension. * Selectable
*Spring Set for room side screen is reverse.
W – 30 mm (1.2")
Product width (W)
15 mm (.59") 15 mm (.59")
30 mm (1.2") 30 mm (1.2")
15.5 mm(.61")
20.5 mm(.81")
W – 36 mm (1.4")
4 mm (.16")4 mm (.16")
24 mm(.94")
21.5 mm(.85")
Product height (H)
43 mm(1.7")
41 mm (1.6")
102 mm(4.0")
83 mm(3.3")
101 mm (4.0")
120 mm (4.7")
For unnecessary Spring Assist
For Plastic Chain
Both Sides Operation One Side Operation
Double Bracket PlateDouble Bracket Plate
SP Side Mount
Chain Side Mount
Chain Housing
Chain Housing
Mytec 01 Loop unit
Ball Chain Connector(Metal or Plastic)
Ball Chain (Metal or Plastic)
Components and Materials
Aluminum
Steel, Molded resin
Steel, Molded resin
Steel, Molded resin
SUS or Brass
MaterialComponentsNo.
Roller Pipe
Spring Set
Non-Balancer Set
Chain Housing
Metal Ball Chain
Molded resin
SUS or Brass
Molded resin
Aluminum
MaterialComponentsNo.
Plastic Ball Chain
Metal Ball Chain Connector
Plastic Ball Chain Joints
MT03 Weight Bar
Molded resin
Steel
Molded resin
Molded resin
MaterialComponentsNo.
MT03 Weight Bar Cap
Double Bracket Plate
SP Side Mount
Chain Side Mount
Mytec 01Mytec 01
Structure Drawing—Mytec 01 Loop / Double Type (Option)Product View Exploded View
Bracket
Spring Set
A – H
AL – HL
AL – HL
A – H
Left
Right
Left
Right
Operation Side
Room SideScreen
Window SideScreen
Specifications
Allowable Size
(Width: 2000 mm/79" without screen) Ex.: Spring Set F, Double Bracket Plate, Metal Ball Chain length is 3000 mm (118")
Maximum Screen Weight
Product Weight
Product Height (H)
Ratio (W : H)
Product Width (W)
4.2 kg (9.3 lb)
For Metal Ball Chain; 3.7 kg (8.2 lb), Plastic Ball Chain; 3.2 kg (7.1 lb), per screen
1 : 3 (limit)
100 mm (3.9") to 3000 mm (118")
Double Type (1 unit)
Notes: Regarding allowable size (W, H, Ratio), depending on material and weight, the screen may get wrinkled, curled or frayed. Maximum Screen Weights are different according to the screen material.
*Please use Roller Pipe 45 mm DIA for W=2,010 mm (79.1") or more.
300 mm (11.8") to 2700 mm (106") *
Weight Bar
Non wrappingtype
Wrappingtype
Room sidescreen
Window side screen
41 mm (1.6")101 mm (4.0")
120 mm (4.7")
16 mm (.63")
16 mm(.63")
16 mm(.63")
33 mm (1.3")
49 mm (1.9")
28 mm (1.1")
15 mm (.59")
18 mm (.71")
20 mm (.79")
16 mm (.63") 4.2 mm (.17")
65 mm (2.8")45 mm (1.8")
102 mm (4.0")
43 mm (1.7")
83 mm (3.3")
24 25
Side Bracket Type
*Refer to 29 page for the Installation Dimension.
*Spring Set for room side screen is reverse.
W – 30 mm (1.2")
Product width (W)
15 mm (.59") 15 mm (.59")
30 mm (1.2") 30 mm (1.2")
15.5 mm(.61")
20.5 mm(.81")
W – 36 mm (1.4")
4 mm (.16")4 mm (.16")
24 mm(.94")
21.5 mm(.85")
Product height (H)
43 mm(1.7")
41 mm (1.6")
102 mm(4.0")
83 mm(3.3")
101 mm (4.0")
120 mm (4.7")
For unnecessary Spring Assist
For Plastic Chain
Both Sides Operation One Side Operation
Double Bracket PlateDouble Bracket Plate
SP Side Mount
Chain Side Mount
Chain Housing
Chain Housing
Mytec 01 Loop unit
Ball Chain Connector(Metal or Plastic)
Ball Chain (Metal or Plastic)
Components and Materials
Aluminum
Steel, Molded resin
Steel, Molded resin
Steel, Molded resin
SUS or Brass
MaterialComponentsNo.
Roller Pipe
Spring Set
Non-Balancer Set
Chain Housing
Metal Ball Chain
Molded resin
SUS or Brass
Molded resin
Aluminum
MaterialComponentsNo.
Plastic Ball Chain
Metal Ball Chain Connector
Plastic Ball Chain Joints
MT03 Weight Bar
Molded resin
Steel
Molded resin
Molded resin
MaterialComponentsNo.
MT03 Weight Bar Cap
Double Bracket Plate
SP Side Mount
Chain Side Mount
Mytec 01Mytec 01
Structure Drawing—Mytec 01 Loop / Double Type (Option)Product View Exploded View
Bracket
Spring Set
A – H
AL – HL
AL – HL
A – H
Left
Right
Left
Right
Operation Side
Room SideScreen
Window SideScreen
Specifications
Allowable Size
(Width: 2000 mm/79" without screen) Ex.: Spring Set F, Double Bracket Plate, Metal Ball Chain length is 3000 mm (118")
Maximum Screen Weight
Product Weight
Product Height (H)
Ratio (W : H)
Product Width (W)
4.2 kg (9.3 lb)
For Metal Ball Chain; 3.7 kg (8.2 lb), Plastic Ball Chain; 3.2 kg (7.1 lb), per screen
1 : 3 (limit)
100 mm (3.9") to 3000 mm (118")
Double Type (1 unit)
Notes: Regarding allowable size (W, H, Ratio), depending on material and weight, the screen may get wrinkled, curled or frayed. Maximum Screen Weights are different according to the screen material.
*Please use Roller Pipe 45 mm DIA for W=2,010 mm (79.1") or more.
300 mm (11.8") to 2700 mm (106") *
Weight Bar
Non wrappingtype
Wrappingtype
Room sidescreen
Window side screen
41 mm (1.6")101 mm (4.0")
120 mm (4.7")
16 mm (.63")
16 mm(.63")
16 mm(.63")
33 mm (1.3")
49 mm (1.9")
28 mm (1.1")
15 mm (.59")
18 mm (.71")
20 mm (.79")
16 mm (.63") 4.2 mm (.17")
65 mm (2.8")45 mm (1.8")
102 mm (4.0")
43 mm (1.7")
83 mm (3.3")
24 25
Side Bracket Type
*Refer to 29 page for the Installation Dimension.
*Spring Set for room side screen is reverse.
Notes: Regarding allowable size (W, H, Ratio), depending on material and weight, the screen may get wrinkled, curled or frayed. Maximum Screen Weights are different according to the screen material.
*Please use Roller Pipe 45 mm DIA for W=2,010 mm (79.1") or more by 2 Unit Link.
Structure for Double Link Bracket and Link Joint Pin
1. Remove the covers for link positions.
Double Link Bracket
Link Double Bracket
Link Joint Pin
Link Joint Pin
2. Insert the Link Joint Pins.3. Set the cover for link positions.
2. Insert the Link Joint Pins.3. Set the cover for link positions.
Link Joint Pipe End
Link Joint Pipe End
Roller Pipes with Chain Housing
Chain Side Mount
SP Side Mount
Double Bracket Plate
Double Bracket Plate
Metal Ball Chain
Metal Ball Chain Connector
Mytec 01 Loop unitMytec 01 Loop unit
*Metal Ball Chain only.
Components and Materials
Aluminum
Steel, Molded resin
Steel, Molded resin
SUS or Brass
SUS or Brass
MaterialComponentsNo.
Roller Pipe
Spring Set
Chain Housing
Metal Ball Chain
Metal Ball Chain Connector
Aluminum
Molded resin
Molded resin
Brass
MaterialComponentsNo.
MT03 Weight Bar
MT03 Weight Bar Cap
Link Joint Pipe End
Link Joint Pin
Steel
Molded resin, Aluminum
Molded resin
Molded resin
MaterialComponentsNo.
Double Bracket Plate
Link Double Bracket
SP Side Mount
Chain Side Mount
1500 mm (59.1") to 4500 mm (177")W1, W2, W3 1500 mm (59.1")
1000 mm (39.3") to 5000 mm (197")W1, W2 2500 mm (98.4") *
Allowable for Roller Pipe 41 mm DIA
15 mm (.59") 15 mm (.59")W2 – 1 mm (.04") W1 – 29 mm (1.1")
14 mm (.55")
W2 W1
Product width (W)30 mm (1.2") 30 mm (1.2")30 mm (1.2")
W1 – 34 mm (1.3")W2 – 29 mm (1.1")20.5 mm (.81")26 mm (1.0")
15.5 mm(.61")
4 mm (.16") 4 mm (.16")
24 mm (.94")
21.5 mm (.85")
43 mm(1.7")
41 mm (1.6")
102 mm(4.0")
83 mm(3.3")
101 mm (4.0")
120 mm (4.7")
Product height (H)
Mytec 01Mytec 01
Structure Drawing—Mytec 01 Loop / Link Double Type (Option)
Specifications
Allowable Size
(Width: 2000 mm/79" without screen) Ex.: Spring Set F, Double Bracket Plate, Metal Ball Chain length is 3000 mm (118")
Maximum Screen Weight
Product Weight
Product Height (H)
Ratio (W : H)
Product Width (W)
4.6 kg (10.1 lb)
10.2 kg (22.5 lb)
4.4 kg (9.7 lb)
11.3 kg (25.0 lb)
1 : 3 (limit)
100 mm (3.9") to 2500 mm (98.4")
2 Units Link 3 Units Link
Product View Exploded View
Bracket Weight Bar
Non wrappingtype
Wrappingtype
Spring Set
A – H
AL – HL
AL – HL
A – H
Left
Right
Left
Right
Operation Side
Room SideScreen
Window SideScreen
One Side Operation
Both Sides Operation
2 Units Link 3 Units Link
41 mm (1.6")101 mm (4.0")
120 mm (4.7")
16 mm (.63")
16 mm(.63")
16 mm(.63")
33 mm (1.3")
49 mm (1.9")
28 mm (1.1")
15 mm (.59")
18 mm (.71")
20 mm (.79")
16 mm (.63") 4.2 mm (.17")
65 mm (2.8")45 mm (1.8")
102 mm (4.0")
43 mm (1.7")
83 mm (3.3")
Room sidescreen
Window side screen
26 27
Side Bracket Type
*Refer to 29 page for the Installation Dimension.
*Spring Set for room side screen is reverse.
Notes: Regarding allowable size (W, H, Ratio), depending on material and weight, the screen may get wrinkled, curled or frayed. Maximum Screen Weights are different according to the screen material.
*Please use Roller Pipe 45 mm DIA for W=2,010 mm (79.1") or more by 2 Unit Link.
Structure for Double Link Bracket and Link Joint Pin
1. Remove the covers for link positions.
Double Link Bracket
Link Double Bracket
Link Joint Pin
Link Joint Pin
2. Insert the Link Joint Pins.3. Set the cover for link positions.
2. Insert the Link Joint Pins.3. Set the cover for link positions.
Link Joint Pipe End
Link Joint Pipe End
Roller Pipes with Chain Housing
Chain Side Mount
SP Side Mount
Double Bracket Plate
Double Bracket Plate
Metal Ball Chain
Metal Ball Chain Connector
Mytec 01 Loop unitMytec 01 Loop unit
*Metal Ball Chain only.
Components and Materials
Aluminum
Steel, Molded resin
Steel, Molded resin
SUS or Brass
SUS or Brass
MaterialComponentsNo.
Roller Pipe
Spring Set
Chain Housing
Metal Ball Chain
Metal Ball Chain Connector
Aluminum
Molded resin
Molded resin
Brass
MaterialComponentsNo.
MT03 Weight Bar
MT03 Weight Bar Cap
Link Joint Pipe End
Link Joint Pin
Steel
Molded resin, Aluminum
Molded resin
Molded resin
MaterialComponentsNo.
Double Bracket Plate
Link Double Bracket
SP Side Mount
Chain Side Mount
1500 mm (59.1") to 4500 mm (177")W1, W2, W3 1500 mm (59.1")
1000 mm (39.3") to 5000 mm (197")W1, W2 2500 mm (98.4") *
Allowable for Roller Pipe 41 mm DIA
15 mm (.59") 15 mm (.59")W2 – 1 mm (.04") W1 – 29 mm (1.1")
14 mm (.55")
W2 W1
Product width (W)30 mm (1.2") 30 mm (1.2")30 mm (1.2")
W1 – 34 mm (1.3")W2 – 29 mm (1.1")20.5 mm (.81")26 mm (1.0")
15.5 mm(.61")
4 mm (.16") 4 mm (.16")
24 mm (.94")
21.5 mm (.85")
43 mm(1.7")
41 mm (1.6")
102 mm(4.0")
83 mm(3.3")
101 mm (4.0")
120 mm (4.7")
Product height (H)
Mytec 01Mytec 01
Structure Drawing—Mytec 01 Loop / Link Double Type (Option)
Specifications
Allowable Size
(Width: 2000 mm/79" without screen) Ex.: Spring Set F, Double Bracket Plate, Metal Ball Chain length is 3000 mm (118")
Maximum Screen Weight
Product Weight
Product Height (H)
Ratio (W : H)
Product Width (W)
4.6 kg (10.1 lb)
10.2 kg (22.5 lb)
4.4 kg (9.7 lb)
11.3 kg (25.0 lb)
1 : 3 (limit)
100 mm (3.9") to 2500 mm (98.4")
2 Units Link 3 Units Link
Product View Exploded View
Bracket Weight Bar
Non wrappingtype
Wrappingtype
Spring Set
A – H
AL – HL
AL – HL
A – H
Left
Right
Left
Right
Operation Side
Room SideScreen
Window SideScreen
One Side Operation
Both Sides Operation
2 Units Link 3 Units Link
41 mm (1.6")101 mm (4.0")
120 mm (4.7")
16 mm (.63")
16 mm(.63")
16 mm(.63")
33 mm (1.3")
49 mm (1.9")
28 mm (1.1")
15 mm (.59")
18 mm (.71")
20 mm (.79")
16 mm (.63") 4.2 mm (.17")
65 mm (2.8")45 mm (1.8")
102 mm (4.0")
43 mm (1.7")
83 mm (3.3")
Room sidescreen
Window side screen
26 27
Side Bracket Type
*Refer to 29 page for the Installation Dimension.
28 29
Mytec 01Mytec 01
Typical Roll-up Diameter Installation Dimensions
–0.20 mm
0.21–0.30 mm
0.31–0.40 mm
0.41–0.50 mm
0.51–0.60 mm
0.61–0.70 mm
0.71–0.80 mm
0.81–0.90 mm
0.91–1.00 mm
1.01–1.10 mm
1.11–1.20 mm
1.21–1.37 mm
A
B
C
D
E
F
G
H
I
J
K
L
400 mm(16")
800 mm(32")
2000 mm(79")
1200 mm(47")
1600 mm(63")
2400 mm(94")
3000 mm(118")
2800 mm(110")
Height
(2.0")
(2.2")
(2.3")
(2.4")
(2.6")
(2.8")
(2.7")
(2.9")
(3.0")
(3.1")
51 mm
55 mm
58 mm
62 mm
65 mm
68 mm
71 mm
74 mm
76 mm
79 mm
—
—
(2.0")
(2.1")
(2.2")
(2.4")
(2.5")
(2.6")
(2.7")
(2.8")
(3.0")
(3.0")
(3.2")
50 mm
54 mm
57 mm
61 mm
64 mm
67 mm
69 mm
72 mm
75 mm
77 mm
80 mm
—
(1.9")
(2.0")
(2.2")
(2.3")
(2.4")
(2.5")
(2.6")
(2.7")
(2.8")
(2.9")
(3.0")
(3.1")
49 mm
52 mm
55 mm
58 mm
61 mm
64 mm
66 mm
69 mm
71 mm
73 mm
76 mm
79 mm
(1.9")
(2.0")
(2.1")
(2.2")
(2.3")
(2.4")
(2.4")
(2.5")
(2.6")
(2.8")
(2.8")
(2.9")
48 mm
51 mm
54 mm
56 mm
59 mm
61 mm
63 mm
65 mm
67 mm
70 mm
71 mm
75 mm
(1.9")
(1.9")
(2.0")
(2.1")
(2.2")
(2.3")
(2.4")
(2.4")
(2.5")
(2.6")
(2.6")
(2.8")
47 mm
49 mm
52 mm
54 mm
56 mm
58 mm
60 mm
62 mm
64 mm
65 mm
67 mm
70 mm
(1.8")
(1.9")
(2.0")
(2.0")
(2.1")
(2.2")
(2.2")
(2.3")
(2.3")
(2.4")
(2.4")
(2.6")
46 mm
48 mm
50 mm
51 mm
53 mm
55 mm
56 mm
58 mm
59 mm
61 mm
62 mm
65 mm
(1.8")
(1.8")
(1.9")
(1.9")
(2.0")
(2.0")
(2.1")
(2.1")
(2.2")
(2.2")
(2.2")
(2.3")
45 mm
46 mm
47 mm
49 mm
50 mm
51 mm
53 mm
54 mm
55 mm
56 mm
57 mm
59 mm
(1.7")
(1.7")
(1.8")
(1.8")
(1.9")
(1.9")
(1.9")
(1.9")
(2.0")
(2.0")
(2.0")
(2.1")
44 mm
44 mm
45 mm
46 mm
47 mm
48 mm
48 mm
49 mm
50 mm
51 mm
51 mm
53 mm
Class(Thickness)
Roller pipe 41 mm (1.6") dia. / Selection of Side Holder
A = a + Roll-up dia.
2
*The dimensions above are common to all types: Side Bracket type, Link type and Set Bar type.
Standard Type
Double Type
Producta
Side Holder S Side Holder M Side Holder L
Mytec 01
Mytec 01 Loop37 mm (1.5")
—
37 mm (1.5")
—
47 mm (1.9")
50 mm (2.0")
47 mm (1.9")
50 mm (2.0")
—
58 mm (2.3")
—
58 mm (2.3")
A = a + Roll-up dia.
2 B = b + Roll-up dia.
2
+ < CScreen 1 Roll-up dia.
2Screen 2 Roll-up dia.
2
Side Bracket Type (Link Type)
Set Bar Type
Side Bracket Type
Set Bar Type
Double TypeDouble Link Type
Product a b c
Mytec 01 Loop 101 mm (4.0")83 mm (3.3") 72 mm (2.8")
–0.20 mm
0.21–0.30 mm
0.31–0.40 mm
0.41–0.50 mm
0.51–0.60 mm
0.61–0.70 mm
0.71–0.80 mm
0.81–0.90 mm
0.91–1.00 mm
1.01–1.10 mm
1.11–1.20 mm
1.21–1.37 mm
A
B
C
D
E
F
G
H
I
J
K
L
400 mm(16")
800 mm(32")
2000 mm(79")
1200 mm(47")
1600 mm(63")
2400 mm(94")
3000 mm(118")
2800 mm(110")
Height
(2.2")
(2.3")
(2.4")
(2.6")
(2.8")
(2.7")
(2.9")
(3.0")
(3.1")
55 mm
58 mm
62 mm
65 mm
68 mm
71 mm
74 mm
76 mm
79 mm
—
—
—
(2.1")
(2.3")
(2.4")
(2.5")
(2.6")
(2.8")
(2.8")
(3.0")
(3.0")
(3.1")
54 mm
58 mm
61 mm
64 mm
67 mm
70 mm
72 mm
75 mm
77 mm
80 mm
—
—
(2.1")
(2.2")
(2.3")
(2.4")
(2.5")
(2.6")
(2.7")
(2.8")
(2.9")
(3.0")
(3.1")
53 mm
56 mm
59 mm
62 mm
64 mm
67 mm
69 mm
72 mm
74 mm
76 mm
78 mm
—
(2.0")
(2.2")
(2.2")
(2.4")
(2.4")
(2.5")
(2.6")
(2.7")
(2.8")
(2.8")
(2.9")
(3.0")
52 mm
55 mm
57 mm
60 mm
62 mm
64 mm
66 mm
68 mm
70 mm
72 mm
74 mm
77 mm
(2.0")
(2.1")
(2.2")
(2.2")
(2.3")
(2.4")
(2.4")
(2.6")
(2.6")
(2.7")
(2.8")
(2.9")
51 mm
53 mm
55 mm
57 mm
59 mm
61 mm
63 mm
65 mm
67 mm
68 mm
70 mm
73 mm
(2.0")
(2.1")
(2.1")
(2.2")
(2.2")
(2.3")
(2.4")
(2.4")
(2.4")
(2.5")
(2.6")
(2.8")
50 mm
52 mm
54 mm
55 mm
57 mm
58 mm
60 mm
61 mm
63 mm
64 mm
65 mm
68 mm
(1.9")
(2.0")
(2.1")
(2.1")
(2.1")
(2.2")
(2.2")
(2.2")
(2.3")
(2.4")
(2.4")
(2.4")
49 mm
50 mm
52 mm
53 mm
54 mm
55 mm
56 mm
57 mm
58 mm
60 mm
61 mm
62 mm
(1.9")
(1.9")
(2.0")
(2.0")
(2.0")
(2.1")
(2.1")
(2.1")
(2.1")
(2.2")
(2.2")
(2.2")
48 mm
49 mm
50 mm
50 mm
51 mm
52 mm
52 mm
53 mm
54 mm
55 mm
55 mm
56 mm
Class(Thickness)
Roller pipe 45 mm (1.8") dia. / Selection of Side Holder (Mytec 01 Loop only)
See 30 pages about diamerter in Top Box type.
*The roll-up diameter might be actually different.*Please contact our local agent for another size.
*The roll-up diameter might be actually different.*Please contact our local agent for another size.
area: Side Bracket Type = M, Set Bar Type = L
area: Side Bracket Type = S, Set Bar Type = M
area: Side Bracket Type = M, Set Bar Type = L
area: Side Bracket Type = S, Set Bar Type = M
a
Roll-up dia.2
A
Roll-up dia.2 a
A
Ceiling attachment Wall attachment
Roll-up dia. Roll-up dia.
Ceiling/Wall attachment
b
c
B
Aa
Screen 1
Screen 2
28 29
Mytec 01Mytec 01
Typical Roll-up Diameter Installation Dimensions
–0.20 mm
0.21–0.30 mm
0.31–0.40 mm
0.41–0.50 mm
0.51–0.60 mm
0.61–0.70 mm
0.71–0.80 mm
0.81–0.90 mm
0.91–1.00 mm
1.01–1.10 mm
1.11–1.20 mm
1.21–1.37 mm
A
B
C
D
E
F
G
H
I
J
K
L
400 mm(16")
800 mm(32")
2000 mm(79")
1200 mm(47")
1600 mm(63")
2400 mm(94")
3000 mm(118")
2800 mm(110")
Height
(2.0")
(2.2")
(2.3")
(2.4")
(2.6")
(2.8")
(2.7")
(2.9")
(3.0")
(3.1")
51 mm
55 mm
58 mm
62 mm
65 mm
68 mm
71 mm
74 mm
76 mm
79 mm
—
—
(2.0")
(2.1")
(2.2")
(2.4")
(2.5")
(2.6")
(2.7")
(2.8")
(3.0")
(3.0")
(3.2")
50 mm
54 mm
57 mm
61 mm
64 mm
67 mm
69 mm
72 mm
75 mm
77 mm
80 mm
—
(1.9")
(2.0")
(2.2")
(2.3")
(2.4")
(2.5")
(2.6")
(2.7")
(2.8")
(2.9")
(3.0")
(3.1")
49 mm
52 mm
55 mm
58 mm
61 mm
64 mm
66 mm
69 mm
71 mm
73 mm
76 mm
79 mm
(1.9")
(2.0")
(2.1")
(2.2")
(2.3")
(2.4")
(2.4")
(2.5")
(2.6")
(2.8")
(2.8")
(2.9")
48 mm
51 mm
54 mm
56 mm
59 mm
61 mm
63 mm
65 mm
67 mm
70 mm
71 mm
75 mm
(1.9")
(1.9")
(2.0")
(2.1")
(2.2")
(2.3")
(2.4")
(2.4")
(2.5")
(2.6")
(2.6")
(2.8")
47 mm
49 mm
52 mm
54 mm
56 mm
58 mm
60 mm
62 mm
64 mm
65 mm
67 mm
70 mm
(1.8")
(1.9")
(2.0")
(2.0")
(2.1")
(2.2")
(2.2")
(2.3")
(2.3")
(2.4")
(2.4")
(2.6")
46 mm
48 mm
50 mm
51 mm
53 mm
55 mm
56 mm
58 mm
59 mm
61 mm
62 mm
65 mm
(1.8")
(1.8")
(1.9")
(1.9")
(2.0")
(2.0")
(2.1")
(2.1")
(2.2")
(2.2")
(2.2")
(2.3")
45 mm
46 mm
47 mm
49 mm
50 mm
51 mm
53 mm
54 mm
55 mm
56 mm
57 mm
59 mm
(1.7")
(1.7")
(1.8")
(1.8")
(1.9")
(1.9")
(1.9")
(1.9")
(2.0")
(2.0")
(2.0")
(2.1")
44 mm
44 mm
45 mm
46 mm
47 mm
48 mm
48 mm
49 mm
50 mm
51 mm
51 mm
53 mm
Class(Thickness)
Roller pipe 41 mm (1.6") dia. / Selection of Side Holder
A = a + Roll-up dia.
2
*The dimensions above are common to all types: Side Bracket type, Link type and Set Bar type.
Standard Type
Double Type
Producta
Side Holder S Side Holder M Side Holder L
Mytec 01
Mytec 01 Loop37 mm (1.5")
—
37 mm (1.5")
—
47 mm (1.9")
50 mm (2.0")
47 mm (1.9")
50 mm (2.0")
—
58 mm (2.3")
—
58 mm (2.3")
A = a + Roll-up dia.
2 B = b + Roll-up dia.
2
+ < CScreen 1 Roll-up dia.
2Screen 2 Roll-up dia.
2
Side Bracket Type (Link Type)
Set Bar Type
Side Bracket Type
Set Bar Type
Double TypeDouble Link Type
Product a b c
Mytec 01 Loop 101 mm (4.0")83 mm (3.3") 72 mm (2.8")
–0.20 mm
0.21–0.30 mm
0.31–0.40 mm
0.41–0.50 mm
0.51–0.60 mm
0.61–0.70 mm
0.71–0.80 mm
0.81–0.90 mm
0.91–1.00 mm
1.01–1.10 mm
1.11–1.20 mm
1.21–1.37 mm
A
B
C
D
E
F
G
H
I
J
K
L
400 mm(16")
800 mm(32")
2000 mm(79")
1200 mm(47")
1600 mm(63")
2400 mm(94")
3000 mm(118")
2800 mm(110")
Height
(2.2")
(2.3")
(2.4")
(2.6")
(2.8")
(2.7")
(2.9")
(3.0")
(3.1")
55 mm
58 mm
62 mm
65 mm
68 mm
71 mm
74 mm
76 mm
79 mm
—
—
—
(2.1")
(2.3")
(2.4")
(2.5")
(2.6")
(2.8")
(2.8")
(3.0")
(3.0")
(3.1")
54 mm
58 mm
61 mm
64 mm
67 mm
70 mm
72 mm
75 mm
77 mm
80 mm
—
—
(2.1")
(2.2")
(2.3")
(2.4")
(2.5")
(2.6")
(2.7")
(2.8")
(2.9")
(3.0")
(3.1")
53 mm
56 mm
59 mm
62 mm
64 mm
67 mm
69 mm
72 mm
74 mm
76 mm
78 mm
—
(2.0")
(2.2")
(2.2")
(2.4")
(2.4")
(2.5")
(2.6")
(2.7")
(2.8")
(2.8")
(2.9")
(3.0")
52 mm
55 mm
57 mm
60 mm
62 mm
64 mm
66 mm
68 mm
70 mm
72 mm
74 mm
77 mm
(2.0")
(2.1")
(2.2")
(2.2")
(2.3")
(2.4")
(2.4")
(2.6")
(2.6")
(2.7")
(2.8")
(2.9")
51 mm
53 mm
55 mm
57 mm
59 mm
61 mm
63 mm
65 mm
67 mm
68 mm
70 mm
73 mm
(2.0")
(2.1")
(2.1")
(2.2")
(2.2")
(2.3")
(2.4")
(2.4")
(2.4")
(2.5")
(2.6")
(2.8")
50 mm
52 mm
54 mm
55 mm
57 mm
58 mm
60 mm
61 mm
63 mm
64 mm
65 mm
68 mm
(1.9")
(2.0")
(2.1")
(2.1")
(2.1")
(2.2")
(2.2")
(2.2")
(2.3")
(2.4")
(2.4")
(2.4")
49 mm
50 mm
52 mm
53 mm
54 mm
55 mm
56 mm
57 mm
58 mm
60 mm
61 mm
62 mm
(1.9")
(1.9")
(2.0")
(2.0")
(2.0")
(2.1")
(2.1")
(2.1")
(2.1")
(2.2")
(2.2")
(2.2")
48 mm
49 mm
50 mm
50 mm
51 mm
52 mm
52 mm
53 mm
54 mm
55 mm
55 mm
56 mm
Class(Thickness)
Roller pipe 45 mm (1.8") dia. / Selection of Side Holder (Mytec 01 Loop only)
See 30 pages about diamerter in Top Box type.
*The roll-up diameter might be actually different.*Please contact our local agent for another size.
*The roll-up diameter might be actually different.*Please contact our local agent for another size.
area: Side Bracket Type = M, Set Bar Type = L
area: Side Bracket Type = S, Set Bar Type = M
area: Side Bracket Type = M, Set Bar Type = L
area: Side Bracket Type = S, Set Bar Type = M
a
Roll-up dia.2
A
Roll-up dia.2 a
A
Ceiling attachment Wall attachment
Roll-up dia. Roll-up dia.
Ceiling/Wall attachment
b
c
B
Aa
Screen 1
Screen 2
area: Side Holder M for Top Box
area: Side Holder S for Top Box
area: Side Holder M for Top Box
area: Side Holder S for Top Box
Mytec 01Mytec 01
Typical Roll-up Diameter—Top Box Type Installation Dimensions
–0.20 mm
0.21–0.30 mm
0.31–0.40 mm
0.41–0.50 mm
0.51–0.60 mm
0.61–0.70 mm
0.71–0.80 mm
0.81–0.90 mm
0.91–1.00 mm
1.01–1.10 mm
1.11–1.20 mm
1.21–1.37 mm
A
B
C
D
E
F
G
H
I
J
K
L
400 mm(16")
800 mm(32")
2000 mm(79")
1200 mm(47")
1600 mm(63")
2400 mm(94")
3000 mm(118")
2800 mm(110")
Height
(2.0")
(2.2")
(2.3")
(2.4")
(2.6")
(2.8")
(2.7")
(2.9")
51 mm
55 mm
58 mm
62 mm
65 mm
68 mm
71 mm
74 mm
—
—
—
—
(2.0")
(2.1")
(2.2")
(2.4")
(2.5")
(2.6")
(2.7")
(2.8")
(3.0")
50 mm
54 mm
57 mm
61 mm
64 mm
67 mm
69 mm
72 mm
75 mm
—
—
—
(1.9")
(2.0")
(2.2")
(2.3")
(2.4")
(2.5")
(2.6")
(2.7")
(2.8")
(2.9")
49 mm
52 mm
55 mm
58 mm
61 mm
64 mm
66 mm
69 mm
71 mm
73 mm
—
—
(1.9")
(2.0")
(2.1")
(2.2")
(2.3")
(2.4")
(2.4")
(2.5")
(2.6")
(2.8")
(2.8")
(2.9")
48 mm
51 mm
54 mm
56 mm
59 mm
61 mm
63 mm
65 mm
67 mm
70 mm
71 mm
75 mm
(1.9")
(1.9")
(2.0")
(2.1")
(2.2")
(2.3")
(2.4")
(2.4")
(2.5")
(2.6")
(2.6")
(2.8")
47 mm
49 mm
52 mm
54 mm
56 mm
58 mm
60 mm
62 mm
64 mm
65 mm
67 mm
70 mm
(1.8")
(1.9")
(2.0")
(2.0")
(2.1")
(2.2")
(2.2")
(2.3")
(2.3")
(2.4")
(2.4")
(2.6")
46 mm
48 mm
50 mm
51 mm
53 mm
55 mm
56 mm
58 mm
59 mm
61 mm
62 mm
65 mm
(1.8")
(1.8")
(1.9")
(1.9")
(2.0")
(2.0")
(2.1")
(2.1")
(2.2")
(2.2")
(2.2")
(2.3")
45 mm
46 mm
47 mm
49 mm
50 mm
51 mm
53 mm
54 mm
55 mm
56 mm
57 mm
59 mm
(1.7")
(1.7")
(1.8")
(1.8")
(1.9")
(1.9")
(1.9")
(1.9")
(2.0")
(2.0")
(2.0")
(2.1")
44 mm
44 mm
45 mm
46 mm
47 mm
48 mm
48 mm
49 mm
50 mm
51 mm
51 mm
53 mm
Class(Thickness)
Roller pipe 41 mm (1.6") dia. / Selection of Side Holder Top Box Type
*The roll-up diameter might be actually different.*Please contact our local agent for another size.
–0.20 mm
0.21–0.30 mm
0.31–0.40 mm
0.41–0.50 mm
0.51–0.60 mm
0.61–0.70 mm
0.71–0.80 mm
0.81–0.90 mm
0.91–1.00 mm
1.01–1.10 mm
1.11–1.20 mm
1.21–1.37 mm
A
B
C
D
E
F
G
H
I
J
K
L
400 mm(16")
800 mm(32")
2000 mm(79")
1200 mm(47")
1600 mm(63")
2400 mm(94")
3000 mm(118")
2800 mm(110")
Height
(2.2")
(2.3")
(2.4")
(2.6")
(2.8")
(2.7")
(2.9")
55 mm
58 mm
62 mm
65 mm
68 mm
71 mm
74 mm
—
—
—
—
—
(2.1")
(2.3")
(2.4")
(2.5")
(2.6")
(2.8")
(2.8")
(3.0")
54 mm
58 mm
61 mm
64 mm
67 mm
70 mm
72 mm
75 mm
—
—
—
—
(2.1")
(2.2")
(2.3")
(2.4")
(2.5")
(2.6")
(2.7")
(2.8")
(2.9")
53 mm
56 mm
59 mm
62 mm
64 mm
67 mm
69 mm
72 mm
74 mm
—
—
—
(2.0")
(2.2")
(2.2")
(2.4")
(2.4")
(2.5")
(2.6")
(2.7")
(2.8")
(2.8")
(2.9")
52 mm
55 mm
57 mm
60 mm
62 mm
64 mm
66 mm
68 mm
70 mm
72 mm
74 mm
—
(2.0")
(2.1")
(2.2")
(2.2")
(2.3")
(2.4")
(2.4")
(2.6")
(2.6")
(2.7")
(2.8")
(2.9")
51 mm
53 mm
55 mm
57 mm
59 mm
61 mm
63 mm
65 mm
67 mm
68 mm
70 mm
73 mm
(2.0")
(2.1")
(2.1")
(2.2")
(2.2")
(2.3")
(2.4")
(2.4")
(2.4")
(2.5")
(2.6")
(2.8")
50 mm
52 mm
54 mm
55 mm
57 mm
58 mm
60 mm
61 mm
63 mm
64 mm
65 mm
68 mm
(1.9")
(2.0")
(2.1")
(2.1")
(2.1")
(2.2")
(2.2")
(2.2")
(2.3")
(2.4")
(2.4")
(2.4")
49 mm
50 mm
52 mm
53 mm
54 mm
55 mm
56 mm
57 mm
58 mm
60 mm
61 mm
62 mm
(1.9")
(1.9")
(2.0")
(2.0")
(2.0")
(2.1")
(2.1")
(2.1")
(2.1")
(2.2")
(2.2")
(2.2")
48 mm
49 mm
50 mm
50 mm
51 mm
52 mm
52 mm
53 mm
54 mm
55 mm
55 mm
56 mm
Class(Thickness)
Roller pipe 45 mm (1.8") dia. / Selection of Side Holder (Mytec 01 Loop only)
*The roll-up diameter might be actually different.*Please contact our local agent for another size.
A = a + Roll-up dia.
2
Producta B C
Top Box S Top Box M Top Box S Top Box M Top Box S Top Box M
Mytec 01 LoopMytec 01
38 mm (1.5")
42 mm (1.7")
38 mm (1.5")
48 mm (1.9")
47 mm (1.9")
51 mm (2.0")
48 mm (1.9")
58 mm (2.3")
70 mm (2.6")
74 mm (2.9")
70 mm (2.6")
80 mm (3.1")
89 mm
93 mm
90 mm
100 mm
(3.5")
(3.7")
(3.5")
(3.9")
70 mm (2.6")
80 mm (3.1")
70 mm (2.6")
74 mm (2.9")
90 mm
100 mm
89 mm
93 mm
(3.5")
(3.9")
(3.5")
(3.7")
Ceiling attachment
Ceiling Bracket attachment
Wall attachment
Wall Bracket attachment
a
Roll-up dia.2
AB
CRoll-up dia.
2 aA
C
B
Top Box ceiling attachment Top Box wall attachment
Roll-up dia. Roll-up dia.
30 31
area: Side Holder M for Top Box
area: Side Holder S for Top Box
area: Side Holder M for Top Box
area: Side Holder S for Top Box
Mytec 01Mytec 01
Typical Roll-up Diameter—Top Box Type Installation Dimensions
–0.20 mm
0.21–0.30 mm
0.31–0.40 mm
0.41–0.50 mm
0.51–0.60 mm
0.61–0.70 mm
0.71–0.80 mm
0.81–0.90 mm
0.91–1.00 mm
1.01–1.10 mm
1.11–1.20 mm
1.21–1.37 mm
A
B
C
D
E
F
G
H
I
J
K
L
400 mm(16")
800 mm(32")
2000 mm(79")
1200 mm(47")
1600 mm(63")
2400 mm(94")
3000 mm(118")
2800 mm(110")
Height
(2.0")
(2.2")
(2.3")
(2.4")
(2.6")
(2.8")
(2.7")
(2.9")
51 mm
55 mm
58 mm
62 mm
65 mm
68 mm
71 mm
74 mm
—
—
—
—
(2.0")
(2.1")
(2.2")
(2.4")
(2.5")
(2.6")
(2.7")
(2.8")
(3.0")
50 mm
54 mm
57 mm
61 mm
64 mm
67 mm
69 mm
72 mm
75 mm
—
—
—
(1.9")
(2.0")
(2.2")
(2.3")
(2.4")
(2.5")
(2.6")
(2.7")
(2.8")
(2.9")
49 mm
52 mm
55 mm
58 mm
61 mm
64 mm
66 mm
69 mm
71 mm
73 mm
—
—
(1.9")
(2.0")
(2.1")
(2.2")
(2.3")
(2.4")
(2.4")
(2.5")
(2.6")
(2.8")
(2.8")
(2.9")
48 mm
51 mm
54 mm
56 mm
59 mm
61 mm
63 mm
65 mm
67 mm
70 mm
71 mm
75 mm
(1.9")
(1.9")
(2.0")
(2.1")
(2.2")
(2.3")
(2.4")
(2.4")
(2.5")
(2.6")
(2.6")
(2.8")
47 mm
49 mm
52 mm
54 mm
56 mm
58 mm
60 mm
62 mm
64 mm
65 mm
67 mm
70 mm
(1.8")
(1.9")
(2.0")
(2.0")
(2.1")
(2.2")
(2.2")
(2.3")
(2.3")
(2.4")
(2.4")
(2.6")
46 mm
48 mm
50 mm
51 mm
53 mm
55 mm
56 mm
58 mm
59 mm
61 mm
62 mm
65 mm
(1.8")
(1.8")
(1.9")
(1.9")
(2.0")
(2.0")
(2.1")
(2.1")
(2.2")
(2.2")
(2.2")
(2.3")
45 mm
46 mm
47 mm
49 mm
50 mm
51 mm
53 mm
54 mm
55 mm
56 mm
57 mm
59 mm
(1.7")
(1.7")
(1.8")
(1.8")
(1.9")
(1.9")
(1.9")
(1.9")
(2.0")
(2.0")
(2.0")
(2.1")
44 mm
44 mm
45 mm
46 mm
47 mm
48 mm
48 mm
49 mm
50 mm
51 mm
51 mm
53 mm
Class(Thickness)
Roller pipe 41 mm (1.6") dia. / Selection of Side Holder Top Box Type
*The roll-up diameter might be actually different.*Please contact our local agent for another size.
–0.20 mm
0.21–0.30 mm
0.31–0.40 mm
0.41–0.50 mm
0.51–0.60 mm
0.61–0.70 mm
0.71–0.80 mm
0.81–0.90 mm
0.91–1.00 mm
1.01–1.10 mm
1.11–1.20 mm
1.21–1.37 mm
A
B
C
D
E
F
G
H
I
J
K
L
400 mm(16")
800 mm(32")
2000 mm(79")
1200 mm(47")
1600 mm(63")
2400 mm(94")
3000 mm(118")
2800 mm(110")
Height
(2.2")
(2.3")
(2.4")
(2.6")
(2.8")
(2.7")
(2.9")
55 mm
58 mm
62 mm
65 mm
68 mm
71 mm
74 mm
—
—
—
—
—
(2.1")
(2.3")
(2.4")
(2.5")
(2.6")
(2.8")
(2.8")
(3.0")
54 mm
58 mm
61 mm
64 mm
67 mm
70 mm
72 mm
75 mm
—
—
—
—
(2.1")
(2.2")
(2.3")
(2.4")
(2.5")
(2.6")
(2.7")
(2.8")
(2.9")
53 mm
56 mm
59 mm
62 mm
64 mm
67 mm
69 mm
72 mm
74 mm
—
—
—
(2.0")
(2.2")
(2.2")
(2.4")
(2.4")
(2.5")
(2.6")
(2.7")
(2.8")
(2.8")
(2.9")
52 mm
55 mm
57 mm
60 mm
62 mm
64 mm
66 mm
68 mm
70 mm
72 mm
74 mm
—
(2.0")
(2.1")
(2.2")
(2.2")
(2.3")
(2.4")
(2.4")
(2.6")
(2.6")
(2.7")
(2.8")
(2.9")
51 mm
53 mm
55 mm
57 mm
59 mm
61 mm
63 mm
65 mm
67 mm
68 mm
70 mm
73 mm
(2.0")
(2.1")
(2.1")
(2.2")
(2.2")
(2.3")
(2.4")
(2.4")
(2.4")
(2.5")
(2.6")
(2.8")
50 mm
52 mm
54 mm
55 mm
57 mm
58 mm
60 mm
61 mm
63 mm
64 mm
65 mm
68 mm
(1.9")
(2.0")
(2.1")
(2.1")
(2.1")
(2.2")
(2.2")
(2.2")
(2.3")
(2.4")
(2.4")
(2.4")
49 mm
50 mm
52 mm
53 mm
54 mm
55 mm
56 mm
57 mm
58 mm
60 mm
61 mm
62 mm
(1.9")
(1.9")
(2.0")
(2.0")
(2.0")
(2.1")
(2.1")
(2.1")
(2.1")
(2.2")
(2.2")
(2.2")
48 mm
49 mm
50 mm
50 mm
51 mm
52 mm
52 mm
53 mm
54 mm
55 mm
55 mm
56 mm
Class(Thickness)
Roller pipe 45 mm (1.8") dia. / Selection of Side Holder (Mytec 01 Loop only)
*The roll-up diameter might be actually different.*Please contact our local agent for another size.
A = a + Roll-up dia.
2
Producta B C
Top Box S Top Box M Top Box S Top Box M Top Box S Top Box M
Mytec 01 LoopMytec 01
38 mm (1.5")
42 mm (1.7")
38 mm (1.5")
48 mm (1.9")
47 mm (1.9")
51 mm (2.0")
48 mm (1.9")
58 mm (2.3")
70 mm (2.6")
74 mm (2.9")
70 mm (2.6")
80 mm (3.1")
89 mm
93 mm
90 mm
100 mm
(3.5")
(3.7")
(3.5")
(3.9")
70 mm (2.6")
80 mm (3.1")
70 mm (2.6")
74 mm (2.9")
90 mm
100 mm
89 mm
93 mm
(3.5")
(3.9")
(3.5")
(3.7")
Ceiling attachment
Ceiling Bracket attachment
Wall attachment
Wall Bracket attachment
a
Roll-up dia.2
AB
CRoll-up dia.
2 aA
C
B
Top Box ceiling attachment Top Box wall attachment
Roll-up dia. Roll-up dia.
30 31
32 33
Mytec 01 Mytec 01
Mytec 01 Parts
Product NameLeft
OperationRight
OperationLeft
OperationRight
Operation
Mytec 01 Loop Mytec 01
Set Bar Type Set BarType
Side Bracket Type SideBracket
Type
Product Code
A
B
C
D
E
F
G
H
Y
AL
BL
CL
DL
EL
FL
GL
HL
Set Bar 2800 mm
Spring Set 01030210
01030211
01030212
01030213
01030214
01030215
30000144
30000146
01030248
01030216
01030217
01030218
01030219
01030220
01030221
30000145
30000147
60230162
01030199
Roller Pipe 2800 mm
White
41 mmDIA
45 mmDIA
01030222
Non-Balancer Set
01030208
Clutch
Connect Pin 1.6 mm x 18 mm Chromate 01030242
Product Name Product Code
400GFCM
800GFCM
01030240
01030241
Speed Controller
Pipe End
01030203
Stop Controller
01030207
30005338
Chain Housing
30005339
Chain Housing G/H
*Height 2410 mm (94.9") and Spring E or F
*No use for Fastener
*For room side screen by Double type. Refer to page 25 or 27.
*Minimum width is 600 mm (23.6") at Stop Controller using. (Depend on the screen.)
*
*(*1)
*1 Please contact our local agent.
LeftOperation
RightOperation
LeftOperation
RightOperation
Mytec 01 Loop Mytec 01
Set Bar Type Set BarType
Side Bracket Type SideBracket
Type
*
*
32 33
Mytec 01 Mytec 01
Mytec 01 Parts
Product NameLeft
OperationRight
OperationLeft
OperationRight
Operation
Mytec 01 Loop Mytec 01
Set Bar Type Set BarType
Side Bracket Type SideBracket
Type
Product Code
A
B
C
D
E
F
G
H
Y
AL
BL
CL
DL
EL
FL
GL
HL
Set Bar 2800 mm
Spring Set 01030210
01030211
01030212
01030213
01030214
01030215
30000144
30000146
01030248
01030216
01030217
01030218
01030219
01030220
01030221
30000145
30000147
60230162
01030199
Roller Pipe 2800 mm
White
41 mmDIA
45 mmDIA
01030222
Non-Balancer Set
01030208
Clutch
Connect Pin 1.6 mm x 18 mm Chromate 01030242
Product Name Product Code
400GFCM
800GFCM
01030240
01030241
Speed Controller
Pipe End
01030203
Stop Controller
01030207
30005338
Chain Housing
30005339
Chain Housing G/H
*Height 2410 mm (94.9") and Spring E or F
*No use for Fastener
*For room side screen by Double type. Refer to page 25 or 27.
*Minimum width is 600 mm (23.6") at Stop Controller using. (Depend on the screen.)
*
*(*1)
*1 Please contact our local agent.
LeftOperation
RightOperation
LeftOperation
RightOperation
Mytec 01 Loop Mytec 01
Set Bar Type Set BarType
Side Bracket Type SideBracket
Type
*
*
34 35
Mytec 01 Mytec 01
Product NameLeft
OperationRight
OperationLeft
OperationRight
Operation
Mytec 01 Loop Mytec 01
Set Bar Type Set BarType
Side Bracket Type SideBracket
Type
Product Code
SP Side Holder
Product Name Product CodeLeft
OperationRight
OperationLeft
OperationRight
Operation
Mytec 01 Loop Mytec 01
Set Bar Type Set BarType
Side Bracket Type SideBracket
Type
S
M
White
Warm White
Gray
Black
White
Warm White
Gray
Black
White
White
White
Warm White
Gray
Black
White
Warm White
Gray
Black
Left
Right
Left
Right
Chain Side Holder
White
Warm White
Gray
Black
White
White
Warm White
Gray
Black
S
M
L
L
S
M
L
Left
Right
End Side Holder
White
Warm White
Gray
Black
White
White
Warm White
Gray
Black
S
M
L
SC Side Holder
White
Warm White
Gray
Black
White
White
Warm White
Gray
Black
S
M
L
Bracket
Side Holder Cover
01030201
30003479
30003480
30003481
30003482
30003483
30003484
30003485
30003486
30003487
01030202
2 pcs/bag
White
Warm White
Gray
Black
White
Warm White
Gray
Black
White
3 pcs/bag
Metal Chain Connector
30005358
01030258
01030257
30003524
30003525
30005359
Metal Ball ChainSUS
Brass
SUS
Brass
Plastic Ball Chain Joints
Plastic Ball Chain
White
White
*Use with Stop Controller
*Set Bar type only
30003433
30003434
30003435
30003436
30003437
30003438
30003439
30003440
30003442
30003443
30003444
30003445
30003446
30003447
30003448
30003449
30003450
30003451
30003452
30003453
30003454
30003455
30003456
30003457
30003458
30003459
30003460
30003461
30003462
30003463
30003464
30003465
30003466
30003467
30003468
30003469
30003470
30003471
30003472
30003473
30003474
30003475
30003476
30003477
30003478
34 35
Mytec 01 Mytec 01
Product NameLeft
OperationRight
OperationLeft
OperationRight
Operation
Mytec 01 Loop Mytec 01
Set Bar Type Set BarType
Side Bracket Type SideBracket
Type
Product Code
SP Side Holder
Product Name Product CodeLeft
OperationRight
OperationLeft
OperationRight
Operation
Mytec 01 Loop Mytec 01
Set Bar Type Set BarType
Side Bracket Type SideBracket
Type
S
M
White
Warm White
Gray
Black
White
Warm White
Gray
Black
White
White
White
Warm White
Gray
Black
White
Warm White
Gray
Black
Left
Right
Left
Right
Chain Side Holder
White
Warm White
Gray
Black
White
White
Warm White
Gray
Black
S
M
L
L
S
M
L
Left
Right
End Side Holder
White
Warm White
Gray
Black
White
White
Warm White
Gray
Black
S
M
L
SC Side Holder
White
Warm White
Gray
Black
White
White
Warm White
Gray
Black
S
M
L
Bracket
Side Holder Cover
01030201
30003479
30003480
30003481
30003482
30003483
30003484
30003485
30003486
30003487
01030202
2 pcs/bag
White
Warm White
Gray
Black
White
Warm White
Gray
Black
White
3 pcs/bag
Metal Chain Connector
30005358
01030258
01030257
30003524
30003525
30005359
Metal Ball ChainSUS
Brass
SUS
Brass
Plastic Ball Chain Joints
Plastic Ball Chain
White
White
*Use with Stop Controller
*Set Bar type only
30003433
30003434
30003435
30003436
30003437
30003438
30003439
30003440
30003442
30003443
30003444
30003445
30003446
30003447
30003448
30003449
30003450
30003451
30003452
30003453
30003454
30003455
30003456
30003457
30003458
30003459
30003460
30003461
30003462
30003463
30003464
30003465
30003466
30003467
30003468
30003469
30003470
30003471
30003472
30003473
30003474
30003475
30003476
30003477
30003478
36 37
Mytec 01 Mytec 01
Mytec 01 Parts (Option)
Product NameLeft
OperationRight
OperationLeft
OperationRight
Operation
Mytec 01 Loop Mytec 01
Set Bar Type Set BarType
Side Bracket Type SideBracket
Type
Product Code
61950023
MT03 Weight Bar 2730 mm(Aluminum)
White
MT03 Weight Bar Cap White
Warm White
Gray
Black
01030265
01030330
01030329
01030275
010302642000 mm
MT03 Bottom Inner Bar
*For non wrapping type only
*For MT03 Weight Bar only
01030188
MT03 Pull Grip Set
MT03 Flat Grip Set
MT03 Pull Ball Set
White
01030193White
01030195
Winder
Fastener
60700091
01030235
White
White
*For non wrapping and wrapping type
*For MT03 Weight Bar only
*For non wrapping and wrapping type
*For MT03 Weight Bar only
*For non wrapping and wrapping type
*For MT03 Weight Bar only
Product Name Product Code
SP Side Holder for Top Box Left
Right
Left
Right
M
S
Chain Side Holder for Top Box
M
S
End Side Holder for Top Box
M
S
Side FrameType
Guide WireType
Link Double TypeLink Type
Double TypeTop BoxType
SC Side Holder for Top Box
Top Box Ceiling Bracket
Top Box Wall Bracket
M
S
* For Mytec 01 Loop only.
30003496
30003497
30003498
30003499
30003500
30003501
30003502
30003503
30003504
30003505
30003494
30003495
Left Operation
Right Operation
Left Operation
Right Operation* *
* *
*With Stop Controller
36 37
Mytec 01 Mytec 01
Mytec 01 Parts (Option)
Product NameLeft
OperationRight
OperationLeft
OperationRight
Operation
Mytec 01 Loop Mytec 01
Set Bar Type Set BarType
Side Bracket Type SideBracket
Type
Product Code
61950023
MT03 Weight Bar 2730 mm(Aluminum)
White
MT03 Weight Bar Cap White
Warm White
Gray
Black
01030265
01030330
01030329
01030275
010302642000 mm
MT03 Bottom Inner Bar
*For non wrapping type only
*For MT03 Weight Bar only
01030188
MT03 Pull Grip Set
MT03 Flat Grip Set
MT03 Pull Ball Set
White
01030193White
01030195
Winder
Fastener
60700091
01030235
White
White
*For non wrapping and wrapping type
*For MT03 Weight Bar only
*For non wrapping and wrapping type
*For MT03 Weight Bar only
*For non wrapping and wrapping type
*For MT03 Weight Bar only
Product Name Product Code
SP Side Holder for Top Box Left
Right
Left
Right
M
S
Chain Side Holder for Top Box
M
S
End Side Holder for Top Box
M
S
Side FrameType
Guide WireType
Link Double TypeLink Type
Double TypeTop BoxType
SC Side Holder for Top Box
Top Box Ceiling Bracket
Top Box Wall Bracket
M
S
* For Mytec 01 Loop only.
30003496
30003497
30003498
30003499
30003500
30003501
30003502
30003503
30003504
30003505
30003494
30003495
Left Operation
Right Operation
Left Operation
Right Operation* *
* *
*With Stop Controller
38 39
Mytec 01 Mytec 01
Product Name Product Code
Top Box Base Plate 5000 mm
Top Box Front Cover 5000 mm
Top Box Cap
Weight Bar for Side Frame 5000 mm
Weight Bar Cap for Side Frame
Pile Tape
M
S
Top BoxType
Guide WireType
Link Double TypeLink Type
Double TypeSide Frame
Type
M
S
M
White
White
S
* For Mytec 01 Loop only.
30003488
30003489
30003490
30003491
30003492
30003493
30003510
30003511
30003512
Left Operation
Right Operation
Left Operation
Right Operation* *
* *
(*1)
(*1)
(*1)
*1 Please contact our local agent.*Use to more black-out.
Product Name Product Code
Side Frame Base 5000 mm
Side Frame Cap
Side Frame Cover 5000 mm
Side Frame Holder
Weight Bar Cap for Guide Wire
Wire Base
Wire (Nylon) ø1.5
Wire (Steel) ø1.5
Wire Stop
Top BoxType
Side FrameType
Guide WireType
* For Mytec 01 Loop only.
30003506
30003507
30003508
30003509
30003515
30003514
30003526
30003527
30003513
White
White
White
White
Clear
*Install in piles, for screen touches parts side.
*Up/down and right/left common.
Link Double TypeLink Type
Double Type
Left Operation
Right Operation
Left Operation
Right Operation* *
* *
*1 Please contact our local agent.
(*1)
(*1)
38 39
Mytec 01 Mytec 01
Product Name Product Code
Top Box Base Plate 5000 mm
Top Box Front Cover 5000 mm
Top Box Cap
Weight Bar for Side Frame 5000 mm
Weight Bar Cap for Side Frame
Pile Tape
M
S
Top BoxType
Guide WireType
Link Double TypeLink Type
Double TypeSide Frame
Type
M
S
M
White
White
S
* For Mytec 01 Loop only.
30003488
30003489
30003490
30003491
30003492
30003493
30003510
30003511
30003512
Left Operation
Right Operation
Left Operation
Right Operation* *
* *
(*1)
(*1)
(*1)
*1 Please contact our local agent.*Use to more black-out.
Product Name Product Code
Side Frame Base 5000 mm
Side Frame Cap
Side Frame Cover 5000 mm
Side Frame Holder
Weight Bar Cap for Guide Wire
Wire Base
Wire (Nylon) ø1.5
Wire (Steel) ø1.5
Wire Stop
Top BoxType
Side FrameType
Guide WireType
* For Mytec 01 Loop only.
30003506
30003507
30003508
30003509
30003515
30003514
30003526
30003527
30003513
White
White
White
White
Clear
*Install in piles, for screen touches parts side.
*Up/down and right/left common.
Link Double TypeLink Type
Double Type
Left Operation
Right Operation
Left Operation
Right Operation* *
* *
*1 Please contact our local agent.
(*1)
(*1)
Mytec 01
Roller Blind
Mytec 01
Two standard systems are available: Mytec 01 Loop, the Chain Drive System with a spring assist mechanism, and Mytec 01, the Spring Drive System with a speed control mechanism.
A variety of optional parts: Top Box type, Side Frame type, Guide Wire type, Link type and Double type.
The Speed Controller installed in the Spring Drive System, Mytec 01 prevents the blind from going up rapidly.
201408E
Oct. 2012RENEWAL
Product Name Product CodeTop BoxType
Guide WireType
Double TypeLink Type
Link Double Type
30000134
30000137
30000136
30000135
30000138
30000141
30000140
30000139
30003516
30003517
30003518
30003519
30003520
30003521
30003522
30003523
30000129
30000126
30000127
30000128
30000133
30000130
30000131
30000132
Double Bracket Plate
Double Bracket SP Side Mount
Double Bracket Chain Side Mount
White
Warm White
Gray
Black
White
Warm White
Gray
Black
White
Warm White
Gray
Black
White
Warm White
Gray
Black
Right
Left
*Use with Double Bracket Plate
*Use with Double Bracket Plate
Link Bracket White
Warm White
Gray
Black
White
Warm White
Gray
Black
M
S
Side FrameType
Link Double Bracket
Link Joint Pipe End
Link Joint Pin
White
Warm White
Gray
Black
30000142
30000125
30000113
30000116
30000114
30000115
* For Mytec 01 Loop only.
Left Operation
Right Operation
Left Operation
Right Operation* *
* *
40