Curriculum VitaeProject Instrumentation and Automation Engineer

Rahul R Mobile : +91 9669 125 666 Email : rahulrnair0589@gmail.com

Career ObjectiveI am looking for a good position in the field of instrumentation and automation in a prestigious company where previous skills and capabilities can be put to efficient use. I can demonstrate my technical and analytical skills and contribute my strong background to the development of an organization.

Personal DetailsProfile : Male, 26, Un-married, Indian, Hindu Current Position : Assistant Manager-Projects Instrumentation and Automation in

Bharat Oman Refineries Limited Current Location : Bhopal – India

Summary of Skills:

About 5 years of experience as a project instrumentation and Automation engineer in detailed Design, Installation and commissioning co-ordination of instrumentation and automation related activities in Refineries projects.

Design, tender document and datasheet preparation, purchase requisition, contract biding, technical queries clarification to bidders, Purchase order placement, document approvals such as inspection and test plans, Piping & Instrumentation Diagram, Process Flow Diagram, cause and effect diagram, logic drawing and as built drawing approval and contract closing.

Basic Engineering and Design Basis, Installation and Commissioning of following projects within specified time limit.

Refinery Projects Revamp of Integrated Hydrocracker and Diesel Hydrotreater (HCU+DHDT) and

Sulfur recovery Block for Debottlenecking of refinery augment the processing capacity of the facilities from present 6 MMTPA to 7.8 MMTPA

Utility Boiler package 1 X 160TPH(NET) Revamp of Lime Stone System at captive power plant Side Stream Filter in cooling tower. Condensate Recovery system at Sulfur Recovery Block Revamp of Fire water Pump house at Crude Oil Terminal Hydrocarbon Detector installations along main line pump house and crude oil

terminal Flame Detector installations at main line pump house and Crude oil terminal.

Automation Projects

1

Upgradation of Bently Nevada System1 software for condition monitoring system Access Control System Wireless Video surveillance system. Solar-wind Hybrid system installation Home & industrial light automation that monitoring status of all switches, fan, air

conditions etc.

Installation, commissioning and troubleshooting of DCS, PLC and packages such as Machine Monitoring System, Analyzers: SWAS (Steam and water Analysis system ) and CEMS (Continuous Emission Monitoring System) and Turbine Control.

DCS : Centum CS3000 Yokogawa PLC : Prosafe-Rs Yokogawa and GE Fanuc series 90-30 MMS: Bently Nevada 3500 Analyzer: Emerson SWAS (Conductivity, pH, DO, HC & SILICA)

: Emerson CEMS (So2, Nox, CO, HC & SPM) Turbine Control: WOODWARD PEAK 150 Wireless Video Surveillance System: Wavesight wireless System

: IndigoVision Control Center Access Control System: SMARTi Systems and HID system

Installation, calibration and loop checking of the field instruments (Emerson Rosemount, ABB, Endress & Hauser, Bently Nevada, Honeywell, Yokogawa.......)

Installation, commissioning and calibration of the control valves of ARCA, MIL, Flowserve, Fisher.....

Familiar with engineering standards ISA, IEEE, ATEX, SIL, ASMI , ANSI , NEMA , IEC Technical Support for the Process, mechanical & electrical team for successful commissioning of

projects. Experienced in the field instruments and control systems procurement activities Spares balance investigation and inventory control for all instruments’ spare parts Excellent communication interpersonal skills.

Educational Qualifications:

2007-2011........ Bachelor of Technology in Applied Electronics and Instrumentation, Mount Zion College Of Engineering, Kerala......... India

2005-2007........Plus Two-Technical Higher secondary School-Under Indian Human resources Department, Mallapally, Kerala...............India

2

Organizational Experience

Organization : Bharat Oman Refineries Limited, Bina, Bhopal- IndiaDuration : Aug 2012 till nowDesignation : Assistant Manager- Project Instrumentation and AutomationProject Description : Execution of In-house Projects in Refinery and maintenance of Responsibilities :

Leading a team of three instrument technicians Reporting periodically to Project Manager; preparing KPI, PM and CM reports. Design, Tender Document preparation for in-house projects, Request for quotation for tender

bidding and Technical Bid Evaluation. Review and approval of instrumentation related documents such as inspection and test plans,

Piping & Instrumentation Diagram, Process Flow Diagram, cause and effect diagram, logic drawing, datasheet of instruments, instrument index etc….

Timely completion of all project that handled by Projects dept, assuring there will be no delay in project due to instrumentation/Automation related activities.

Engineer In-Charge for instrumentation related activities in installation, commissioning and execution of projects. Supervision of instrumentation related erection and successful commissioning of projects.

Quality inspection: Responsible for review and approval for Factory and site acceptance of instruments and control system procured in projects.

Techno-commercial activities: Tender document preparation, tender bidding (Open, limited & single tender), technical queries, clarification and acceptance, Co-ordination for conducting pre-bid meeting & kick off meeting, bill processing as per PO payment terms.

Commissioning and Troubleshooting: Totally integrated automation system of utility boiler of Yokogawa CS 3000, Yokagawa Prosafe-RS, Bently Nevada 3500 vibration monitoring system, Emerson SWAS (Conductivity, pH, DO, HC & SILICA), Emerson CEMS (So2, Nox, CO, HC & SPM) and WOODWARD PEAK 150.

Resource optimization by utilization of existing resources: Control system Integration activities in DCS/PLC system, marshaling cabinet terminals, field junction box terminals, surplus material available from project time etc. are utilized for meeting new project requirement such revamp job.

Periodic maintenance and Troubleshooting of Access Control system and wireless video surveillance system. Planning required upgradation for instruments to achieve production quality and cost minimizing. Ensure Spares balance and inventory control for all instruments’ spare parts.

Installation, commissioning and calibration of transmitters PT, LT, TT, DPT (Emerson Rosemount, Endress & Hauser, ABB ,.....) and Monitoring vibration transducers.

Planning of all project activities: preparation of over all project schedule, ordering status of items, instrumentation job execution micro planning and as built document preparation for handing over project & spare to user department and execution of all projects with zero downtime loss complaining to all refinery fire and safety rules.(Permit system, Tool box talk, Risk assessment preparation etc.)

3

Organization : OPAC Engineering Limited – IndiaDuration : JULY 2011 to MARCH 2012Designation : Site Instruments EngineerProject Description : Instrumentation Maintenance & Shut-down Jobs at Bharat Petroleum

Co-operation Limited, Kochi Refinery.Responsibilities:

Site In-charge for all instrumentation related site activities in RODM plant, Hydrocracker Unit-Diesel Hydrotreater and Crude Distillation Unit.

Involved in the mixing plants erection works, commissioning and maintenance. Troubleshooting of PLC system (Siemens simatic S7 300 ) and faults diagnosis . Calibrating of transmitter, thermocouple, RTD, Gauges and Switches. Planning and implementing additional control loops as per site requirements Printed circuit boards PCB Repairing, Designing, and Modifying.

Training DCS training Yokogawa CS3000, YIL Bangalore. PLC training Yokogawa Prosafe-RS, YIL Bangalore. Prodok Coval software, BORL,Bina. Bently Nevada 3500 configuration, BORL, Bina.

IT Skills Operating systems : Windows XP, 7,NT, 2008 Server Programs : Conval software for instrument design, Office Tools Programming languages : Visual Basic, C++, Arduino Intel Edison controller programming PLC Programming : Ladder Diagram, Functional block Control Programs : PCS7 v6.0 Siemens & CS3000 DCS, WINCC& IFIX SCADA Networking : LAN, wireless network using IEEE 802.11a/b/g/n standards

LanguagesEnglish : Fluent: read, write and speakMalayalam : Mother tongueHindi : Fluent: speak Tamil : Fluent: speak

AvailabilityEarliest start date: Given 10 weeks notice

________________________________________________________________________________________

DeclarationI hereby declare that all information stated above is true to the best of my knowledge.

(Last Updated on Feb 2016)

4