Cel-Fi Indoor Omni Antenna A52-V32-100

Cel-Fi Wideband Panel AntennaA11-V43-100

Cel-Fi Wideband Directional AntennaA32-V32-100

Cel-Fi Mobile Mag Mount AntennaA41-V21-100A41-V21-101

Cel-Fi Mobile Bolt Mount AntennaA41-V36-100 A41-V36-101

Cel-Fi Whip AntennaA21-V33-100

Cel-Fi MobileServer Antenna A41-V30-100

Cel-Fi Mount AntennaA62-V44-100

Cel-Fi TruckerAntennaA21-V31-100

Cel-Fi Marine Antenna A11-V37-100

Cel-Fi Antenna MountF66-100

Cel-Fi Pole MountF26-100

User Interface

qsg_

go+-

eng_

19-0

730

For more information, visit: www.cel-fi.com

Cel-Fi GO+ All-in-One Quick Start Guide

Smart Signal Booster™

Basic Functionality

The Cel-Fi GO+ All-in-One Smart Signal Booster Smart Signal Booster is designed to improve cellular coverage in a building, remote area, or vehicle. Cel-Fi GO+ connects to an external Donor Antenna to draw in a cellular signal from the macro network, and redistribute signal via the Server Antenna.

Cel-Fi WAVE App

The Cel-Fi WAVE app provides a User Interface to Cel-Fi systems. The app’s dashboard shows the system “Boost” value that is a numeric representation mapped to the amount of Signal Gaivn the system is providing. Higher is better, with nine (9) being the highest value. Cel-Fi WAVE is the registration and management application that allows users to setup antenna, modes, and carriers. Cel-Fi WAVE app is available through either the Google Play Store or Apple App Store; depending on the mobile device.

Cel-Fi GO+ is configured to automatically select the best cellular band to boost.

• A user may manually configure the system’s preferences using the Cel-Fi WAVE app.

• A user may manually change the system’s Carrier config and Mode between Mobile and Stationary via Cel-Fi WAVE app.

NEMA 4 Rating

The Cel-Fi GO+ is NEMA 4 rated, and can be used both indoors and outdoors. The NEMA 4 rating provides the following advantages:

• A degree of protection against ingress of solid foreign objects (falling dirt and windblown dust)

• A degree of protection from the ingress of water (rain, sleet, snow, splashing water, and hose directed water)

• Equipment will be undamaged by the external formation of ice on the enclosure

Review the latest authorized antennas at www.cel-fi.com/antennasAntenna and Mount Options:

LED MEANINGSolid GREEN The unit is working properly and boosting properly.Blinking GREEN Unit is scanning for networks to boost.Blinking RED The unit is in an error condition. Use the Cel-Fi WAVE app to

check the error code meaning and remedy.Solid RED The unit has a hardware error and is not booting up normally.

Cel-Fi GO+ All-in-One Smart Signal Booster features an LED on the top face to indicate the unit’s state:

NOTE: In mobile usage, it is normal for the Cel-Fi GO+ All-in-One Smart Signal Booster to fluctuate between scanning and boosting. The Cel-Fi GO+ All-in-One Smart Signal Booster automatically adjusts its boost behavior based on available signal.

ISSUE MEANING ACTIONContinual Blinking GREEN

Unit is operational, but not attaching to a network to boost.

• Make sure both antennas are connected properly and are appropriate for the desired frequencies to boost.

• Make sure the selected operator to relay is available at your location. This can be checked with the Cel-Fi WAVE application. If the service is not available, it cannot be boosted.

Solid RED LED

Unit is not operational.

• Unplug and reinsert power.• If restart has no effect, contact vendor for

remedy.

Troubleshooting

Specifications: Frequency Support Multiple variations of the product are available with

different frequency support.

Model: G32-2/4/5/12/13

BAND NAME DOWNLINK UPLINK

2 1900 PCS 1930 1990 1850 19104 AWS–1 2110 2155 1710 17555 850 869 894 824 849

12 700 a 729 746 699 71613 700 c 746 756 777 787

Gain Up to 100 dB system gain Model: G32-1/3/5/7/8/20

BAND NAME DOWNLINK UPLINK

1 2100 2110 2170 1920 19803 1800+ 1805 1880 1710 17855 850 869 894 824 8497 2600 2620 2690 2500 25708 900 925 960 880 915

20 800 DD 791 821 832 862

Gain Up to 100 dB system gain

Dimensions

LENGTH WIDTH HEIGHT WEIGHT

272.5 mm 96.5 mm 43.5 mm 850 g Power (max)

DOWNLINK TX UPLINK TX

10 dBm/5 MHz (16 dBm per band)

24 dBm per band

Bluetooth (LE Ver 4.2) FREQUENCY POWER

2042 – 2480 MHz 0 dBm Environmental Operating Temp: 0 - 65°C Relative Humidity: 95% Antenna Connectors SMA-Female Certifications 3GPP TS 25.143 Rel.10 BQB (Bluetooth) (All variants) 3GPP TS 36.143 Rel.10 NEMA-4 RoHS 2 (G32-2/4/5/12/13 FCC CSA C22.2#62368-1 variants only) ISED UL 50E, UL 60950-22 UL 62368-1:2014 CSA C22.2#60950-22 (G32-1/3/5/7/8/20 IEC 62368-1:2014 EN 301 908-1 v11.1.1 variants only) EN 301 489-1 v2.1.1 EN 301 908 v11.1.2 EN 301 489-17 v3.1.1 EN 301 908 v11.1.2 EN 301 489-50 v2.2.0 EN 300 328 v2.1.1 EN 62311 (2008) Regulation (EC) 1275/2008 (Standby and Off mode) Regulation (EC) 278/2009 (External Power Supply)

Cel-Fi GO+ All-in-One Smart Signal Booster

Before You BeginCel-Fi GO+ All-in-One Smart Signal Booster has a Donor Antenna Port and a Server Antenna Port. They are marked on the device with icons (see illustration). It is critical that the Donor and Server antennas are connected to the correct port. IMPORTANT: Best to make sure all cable lengths support the intended mounting location BEFORE permanent mounting.

Cel-Fi GO+ All-in-One Smart Signal Booster Installation SERVER DONOR

Cel-Fi GO+ All-in-One Smart Signal Booster www.cel-fi.com

Change Modes Between Mobile (65/70dB)orStationary(100dB)1. Open Cel-Fi WAVE application 2. Go to settings tab3. Select Booster Setting4. Switch between mobile and stationary

ChangeCarrier/Operator1. Open Cel-Fi WAVE application2. Go to settings tab 3. Select Operator4. Switch between mobile network operators

Change Between Modes and CarriersIMPORTANT: Cel-Fi GO+ All-in-One Smart Signal Booster ships with a mode and operator selected, but some versions can be changed via Cel-Fi WAVE.

Install Server Antenna**Sold Separately

2 Connect Donor & Server Antennas to the Cel-Fi GO+

4 Activate & Setup with Cel-Fi WAVE

6MountCel-Fi GO+3 An AC or

12V Power Source

5Install Donor Antenna

1

4

1253

2

3

1

5

4

1

35

22

4

06:00 PM 5

1

23

4

52

1

34

Point & Optimize AntennaFor stationary applications, Cel-FiGO+X Indoor/Outdoor Solution with AntennaBoost integrates the Cel-Fi Antenna with the Cel-Fi WAVE Platform to provide the best donor signal in the industry. Nextivity’s proprietary 8-position dial base enables the antenna to be rotated in 45-degree increments for best performance, optimized with real time data from the Cel-Fi WAVE Antenna Position Test.

Install Tips for Donor Antenna

• Install antenna at least 12 inches from any other antennas for best performance

• Antenna should be free of obstructions• Antenna should be away from windows (including sunroof or

other openings)• Install 8 inches away from any people• For best performance make sure there is 50 cm of metal

around the base of the antenna

Install Tips for Server Antenna

• For best results, install Donor and Server Antennas such that there is substantial material between the antennas. This will create isolation and allow the system to perform at higher gain without oscillation or feedback

• Keep Donor and Service Antennas separated/isolated from each other for best performance

• Do not use cable splitters for Donor Antennas• Follow the installation instructions for your chosen antennas• The power supply is not NEMA 4 rated

Tips for Mobile Mounting:

• Location should have airflow (for cooling) and be secure from contact with external objects

• Make sure the unit is within cable range of the 12V power supply on your vehicle

2

2

1

3

3

45

Antenna

Antenna Mount1 2

34

56

78

8-Position Dial

Position Set Screw

1 23

4

56

78

1 23

4

56

78

Position Arrow