Always confirm that the product selected is consistent with the original equipment manufacturer’s recommendation for the equipment operating conditions and customer’s maintenance practices.

Product description

Multifak EP is an efficient performance extreme pressure

multipurpose grease, suitable for both automotive and

industrial applications.

Multifak EP is formulated with highly refined mineral base

oils and a lithium thickener, combined with extreme

pressure additives and rust and oxidation inhibitors.

Multifak EP is available in the following grades:

• Multifak EP 0

• Multifak EP 1

• Multifak EP 2

Customer benefits

• EP additives contribute to high load wear protection

• Helps protect metal surfaces from rust and corrosion

• Robust oxidation resistance

• Lithium thickener provides good flow and pumpability

(NLGI 2)

• Multipurpose application reduces inventories and

mis-applications

Applications

• Industrial plain and rolling element bearings

• General plant lubrication

• Centralised lubrication systems

• Construction equipment bearings

• Earthmoving, quarrying and mining

• Agricultural equipment

• Automotive wheel bearings

• Chassis grease point lubrication

• High load EP wear protection

• Corrosion and oxidation resistance

• Multipurpose application

Selected specification standards include:

DIN ISO

MAN Mercedes Benz

Volvo

Multifak®

EP Efficient performance extreme pressure multipurpose automotive and industrial grease

Product highlights

Multifak® EP ─ Continued

Disclaimer Chevron accepts no liability for any loss or damage suffered as a result of using this product for any application other than applications specifically stated in any Product Data Sheets. Health, safety, storage and environmental Based on current available information, this product is not expected to produce adverse effects on health when used for the intended application and in accordance with the recommendations provided in the Material Safety Data Sheet (MSDS). MSDSs are available upon request through your local sales office, or via the Internet. This product should not be used for purposes other than its intended use. When disposing of used product, take care to protect the environment and follow local legislation.

© 2012 Chevron Products UK Limited. All rights reserved. All trademarks are property owned by Chevron Intellectual Property LLC.

EU v4 23 October 2012 Multifak

® EP

Approvals, performance and recommendations

Approvals

Multifak EP 2 is approved against:

• Mercedes Benz MB 267

• MAN 283

• Volvo 1277.18 – Multi-purpose grease

Performance

DIN 51 502 ISO 6743-09 Operating temperature

Multifak EP 0

Multifak EP 1

Multifak EP 2

GP 0 K-30/KP 0K-30

KP 1 K-30

KP 2 K-30

ISO-L-XCCEB 0

ISO-L-XCCEB 1

ISO-L-XCCEB 2

–30 up to 120 °C with

short periods up to 140 °C

Typical test data

Test Test methods Results

NLGI Grade DIN 51 818 0 1 2

Product Code 000901 000921 000995

Soap type DIN 51 814 Lithium Lithium Lithium

Dropping Point, °C ISO 2176 >200 >200 >200

Oil type - Mineral Mineral Mineral

Base oil viscosity at 40°C, mm2/s DIN 51 562 200 200 200

Penetration worked, 0.1 mm ISO 2137 355-285 310-340 265-295

Copper Corrosion 24h/120°C DIN 51 811 1 1 1

Emcor corrosion, distilled water ISO 11007 0/0 0/0 0/0

Water resistance static DIN 51 807/1 1-90 1-90 1-90

Four Ball weld load, N DIN 51 350/4 2600 2600 2600

Four Ball wear scar, 1min/1000N, mm DIN 51 350/5 0.5 0.5 0.5

The information given in the typical data does not constitute a specification but is an indication based on current production and can be affected by allowable production tolerances. The right to make modifications is reserved. This supersedes all previous editions and information contained in them.