MultiCAM

Daylight UVc, IR and Visible Channel CameraOnboard Still Imaging Recording Onto CF™ CardUV Photon CountingsSleek Ergonomic DesignEasy Setup and Operation High Quality Colour Viewfinder DisplayLow Noise Highly Sensitive DetectorWide Field Of View with 25x Optical Zoom

l The MultiCAM can operate in both day or nighttime.l It is an excellent diagnostic tool which enables the user to locate and identify

corona discharge and infrared hot spot activity on electrical equipment.l The UVc, Thermal and Visible channels can be shown individually or overlaid

onto each other.l The Visible, Thermal & UVc channels can be variably zoomed up to 2x with

minor parallax error and Automatic or Manual focus.l A simple user interface allows for easy access to the menu system. l User selectable settings for image processing and corona enhancement.l Onboard image processing allows for increased sensitivity and noise reduction

without lowered frame rates associated with long exposure photography.l High quality video can be streamed to an external recorder via composite or

S-Video output.l GPS, Laser Pointers and External Remote Control can be added.l Camera software can be upgraded via Compact Flash™ card.l External recording peripherals can be interfaced via industry standard outputs.

TH

E F

IRST D

AYLI

GH

T C

ORO

NA

AN

D T

HERM

AL

IMA

GIN

G C

AM

ERA

Applications:

l Transmission Line Inspection l Distribution Line Inspectionl Substation Inspection l HV Electrical Component Inspection l Handheld Airborne Inspection by OEM Manufacturersl Generator and Motor Winding l High Voltage Panel Inspection

Inspections

Standard System • MultiCAM DAYLIGHT UV & THERMAL CF Storage CARD OPERATING MANUAL

AC MAINS ADAPTOR CABLE SET (Video and Power)2 x Li-ION BATTERY MultiSOFT™SOFTWAREPROTECTIVE CARRY CASE

REMOTE CONTROLOptional Accessories GPS & LASER POINTER EXTERNAL VIDEO RECORDERS

• IMAGER •

• • • • •

• • •

™

Data StorageStorage Media Removable Compact Flash™ CardImage Format JPEG compressed still imageVideo Storage On External RecorderAudio Audio label, wave fileStorage Capacity 1000+ images per GBFile download Via USB

External via card reader

Comms InterfacesUSB Image download from CF™ CardRS485 Camera control via PCAuxiliary Remote control interface

1 Alarm output - optional1 Trigger input - optionalRS232 general port

ProcessingImage Processing Powerful onboard digital signal

Processor for:Visible / UV image & data overlayingUV image enhancementsUV image integrationImage compression and storage

Date/Time Real-time clock with battery backupTemperature Internal camera temperatureLocation GPS (optional)Audio Modes Microphone input for audio notesPower Saving Real-time, integrate, standby, off

User Configurable auto standby/offUser Settings / Customised operating modes and control Configuration functions

User defined titles, notes and file names for storageUser configured alarm output - option

Software Upgrading Via Compact Flash™ Card

MechanicalWeight 2.6 kg including battery, excl. accessoriesSize 275mm L x 165mm W x 150mm HMounting Points M4 hard point, ¼” Thread tripod mount

EnvironmentalOperating Temp -15°C to 50°CStorage Temp -25°C to 60°CHumidity Up to 90%, non condensating

Combined OutputOptical SystemVideo Output CompositeFormat PAL/NTSC AvailableOptical Channels Visible, Ultra Violet and LWIR -

Shown separate or overlaidFocus Type Automatic , manual overrideFocus Range 2m to InfinityWindow aperture Ø= 52 mm

Ultraviolet ChannelImage type Monochrome videoSpectrum UV 240 – 280 nmField of View 8° Horizontal x 6° VerticalZoom Factor 0.5x, 1x, 2xUpdate Rate 50 Hz maxFocus type Auto slaved to visible, manual

Thermal ChannelSpectrum LWIR: 8 to 12µm, NETD 50 mKTemperature Range 0°C to 160°CResolution 320 (H) x 240(V) pixelsZoom 20 Steps up to 11x

Visible Channel Type Colour Video, full functionSensitivity @ 60fps 3 Lux minField of View Default synchronised with UV

channelZoom Factor 25 x optical max

Operator InterfacesApplication Handheld or remote controlledDisplay SVGA colour micro display

viewfinderStatus Indicator LED’sAlarms Audio, LED & Aux contactsControl Inputs Onboard multi pushbutton

Remote control unitPC software controlled - option

Audio Headphone outputMicrophone input

Power SystemPower Consumption 17 WattBattery Type Rechargeable Li-Ion

Sony Type L compatibleBattery Run Time Typical 1.5 hrs min operationBattery Location Onboard, quickly replaceableCharging On camera / optional chargerMains Adaptor 110-240VAC 50-60 HzPower Modes Operate, chargeProtection Reverse polarity, over current,

Under voltage

Riaan Rossouw | Tel: +27 12 349 3760 | Fax: +27 12 349 5200 | Email: riaan@uvirco.comUViRCO Technologies (Pty) Ltd, Unit B003, The Woods, 41 De Haviland Rd, Persequor Park, Pretoria, 0020, South Africa

MultiC

AM

- TH

E F

IRST D

AYLIG

HT C

ORO

NA

AN

D T

HERM

AL IM

AG

ING

CA

MERA

SYSTEM SPECIFICATIONS Specifications subject to change without notice.