Multi-Port RS-232/422/485 PCI Express Mini Card Data Sheet

Multi-Port RS-232/422/485 PCI

Express Mini Card Data Sheet

10623 Roselle Street, San Diego, CA 92121-1506 800 326 1649 858 550 9559 http://acces.io MADE IN THE USA

MODELS MPCIE-COM-4SM, MPCIE-COM-4S, MPCIE-COM232-4

AND MPCIE-COM-2SM, MPCIE-COM-2S, MPCIE-COM232-2

FEATURES

PCI EXPRESS MINI CARD (MPCIE) TYPE F1, WITH LATCHING I/O CONNECTORS FOUR AND TWO-PORT MPCIE SERIAL CARDS WITH OPTIONAL DB9M CONNECTIVITY FOUR SOFTWARE SELECTABLE SERIAL TYPES: RS-232, RS-422, AND RS-485 (2WIRE & 4WIRE) “SM” MODELS SUPPORT ALL 3 SERIAL TYPES. “S” MODELS SUPPORT RS-422 AND RS-485 HIGH PERFORMANCE 16C950 CLASS UARTS WITH 128-BYTE FIFO FOR TX AND RX BUFFERING SUPPORTS DATA COMMUNICATION RATES TO 921.6KBPS IN RS232 – AS HIGH AS 3MBPS IN

DIFFERENTIAL MODES – 10MHZ WITH CUSTOM CRYSTAL OPTION PORT-BY-PORT FIELD SELECTABLE TERMINATION FOR RS422 & RS485 APPLICATIONS VIRTUALLY ANY CUSTOM BAUD RATE MAY BE CONFIGURED BY THE USER VIA REGISTER SETTINGS, NO

CUSTOM OSCILLATOR NEEDED ±15KV ESD PROTECTION ON ALL SIGNAL PINS SUPPORTS CTS, RTS, 9-BIT DATA MODE, HALF-DUPLEX AND FULL-DUPLEX COMMUNICATIONS ROHS AND INDUSTRIAL TEMP (-40°C TO 85°C) BOTH STANDARD

FUNCTIONAL DESCRIPTION

The mPCIe-COM-4SM family of cards feature high performance 16C950-class UARTs. Available in 4-port and 2-port versions, each port is capable of communication speeds up to 921.6kbps in RS-232 (differential modes support speeds as high as 3Mbps) and has 128-byte deep transmit and receive FIFOs. Large FIFOs protect against data loss in multitasking operating systems, reduce CPU utilization, and improve data throughput, while reducing or eliminating inter-character or inter-packet pauses. The advanced integrated circuit with pre-scalar supports a wide variety of custom baud rates, and any rates not otherwise achievable can be supported via a custom factory-installed crystal oscillator (up to 10Mbps!).

RS-232, RS-422, or RS-485 can be software selected, per port, and the selection is stored in non-volatile memory for future use. If you don’t need that much flexibility you can order versions with only RS422/485 or even pure RS232. The RS232 ports provided by the card are 100% compatible with every other industry-standard serial COM device, supporting TX, RX, RTS, and CTS. RS422 mode uses the same transceivers as the RS-485 specification, allowing perfect 4-wire RS-422 and RS-485 compatibility – and the device supports full-duplex RS-485 4-wire.

Communication is possible either with custom application software, with off-the-shelf applications (such as HyperTerminal), or with provided samples and utilities, including WinRISC™ (“Windows Really Incredibly Simple Communication”).

The serial ports on the device are accessed using a low-profile, latching, 6-pin Hirose connector. Optional breakout cables are available, and bring each port connection to a panel-mountable DB9-M connector.

SPECIAL ORDER

Please contact ACCES with your precise requirement. Examples of special orders would be custom oscillators, conformal coating, custom software or product labelling, and more. We will work with you to provide exactly what is required.

ACCESSORIES

Available accessories include: CAB-mPCIe-COM2 Two port DB-9 cable accessory kit CAB-mPCIe-COM4 Four port DB-9 cable accessory kit

ADAP-9 DB-9 Screw Terminal Accessory mPCIe-HDW-KIT2 2mm mounting hardware

mPCIe-HDW-KIT2.5 2.5mm mounting hardware

SOFTWARE

A complete driver support package is provided including an easy-to-use Windows terminal program for testing your COM ports. This simplifies the verification of proper COM port operation. The card installs as standard COM ports in all operating systems including DOS, Linux (including Mac OS X) and 32-bit and 64-bit Windows. Additional drivers may be available for a wide variety of operating systems including Windows CE, please contact the factory for compatibility with your specific OS.

http://acces.io/

Multi-Port RS-232/422/485 PCI

Express Mini Card Data Sheet


PC Interface

PCI Express Mini Card Type F1 “Full Length” V1.2

Communications Interface

Connector I/O Hirose DF57-6P-1.2V 6-pin, latching

Mating Hirose DF57H-6S-1.2C

Serial Ports software selected

serial type (per port, stored

in EEPROM)

4 (or 2)

-4SM (-2SM) RS-422, RS-485, and RS-232

-4S (-2S) RS-422 and RS-485

232-4 (232-2) RS-232 only

UART Quad 16C950

FIFO 128-byte transmit & receive

Baud Rates up to 921.6k baud in RS-232 up to 3MBaud in differential modes advanced-prescaler allows a wide variety of unusual baud rates to be achieved. Up to 10Mbps via custom crystal option

Character length 5, 6, 7, 8 bits (contact factory for assistance with 9-bit data)

Parity Even, Odd, None, Mark, Space

Stop Interval 1, 1½, 2 bits

Flow Control RS-232 RTS/CTS, Xon/Xoff, None

RS-422, RS-485 Xon / Xoff, None

Environmental

Temperature Operating -40° to 85°C

Storage -65° to 150°C

Humidity 5% to 95%, non-condensing

Power required +3.3VDC @ 1.6W (typical)

ESD Protection ±15kV on all signal pins (IEC 61000)

Physical

Weight 6.4 grams

Size Length 50.95mm (2.006“)

Width 30.00mm (1.181“)

ORDERING GUIDE

DB-9 Male Pin

232 422 485

1 Tx-

2 RX Tx+

3 TX Rx+ Rx/Tx+

4 RTS1 Rx- Rx/Tx-

5 GND GND GND

6

7 RTS Rx-1

8 CTS

9

Note 1: pin 4 and pin 7 are connected.

Signal Definitions

Signal Meanings

no connect

RX Receive Data

TX Transmit Data

GND Signal Ground

RTS Request To Send

CTS Clear To Send

Tx- Diff. full-duplex TX -

Tx+ Diff. full-duplex TX+

Rx+ Diff. full-duplex Rx+

Rx- Diff. full-duplex Rx-

Rx/Tx+ Diff. half-duplex +

Rx/Tx- Diff. half-duplex -

Rx- RTS Pin 4 and pin 7 are connected, so these signals are duplicates to be ignored.

Hirose 6-pin

232 422 485

1 GND GND GND

2 Tx Rx+ Rx/Tx+

3 Rx Tx+

4 RTS Rx- Rx/Tx-

5 CTS

6 Tx-

mPCIe-COM-4SM 4-port, RS-232, -422, and -485 PCI Express Mini Card

mPCIe-COM-2SM 2-port, RS-232, -422, and -485 PCI Express Mini Card

mPCIe-COM-4S 4-port, RS-422, and -485 PCI Express Mini Card

mPCIe-COM-2S 2-port, RS-422, and -485 PCI Express Mini Card

mPCIe-COM232-4 4-port RS-232 PCI Express Mini Card

mPCIe-COM232-2 2-port RS-232 PCI Express Mini Card

SHIPS STANDARD WITH INDUSTRIAL OPERATING TEMPERATURE AND ROHS

1

6 9

5

DSub 9-pin Male

http://acces.io/

24 Digital I/O with CoS IRQ

PCI Express Mini Card Datasheet


FEATURES MODELS MPCIE-DIO-24S AND MPCIE-DIO-24

PCI EXPRESS MINI CARD (MPCIE) TYPE F1, WITH LATCHING I/O CONNECTORS 24 HIGH-CURRENT DIO LINES (24MA SOURCE/SINK) CHANGE-OF-STATE (COS) DETECTION IRQ GENERATION 10K OHM PULL-UP RESISTORS FOUR AND EIGHT BIT PORTS INDEPENDENTLY SELECTABLE FOR USE AS INPUTS OR OUTPUTS ALL SIGNALS BROUGHT OUT TO OPTIONAL PANEL-MOUNTABLE 37-PIN MALE DSUB CONNECTOR ROHS STANDARD AVAILABLE INDUSTRIAL TEMP (-40°C TO +85°C)


The mPCIe-DIO-24S is a type F1 PCI Express Mini Card (mPCIe) and optional cable assembly (DSub 37-pin Male connector) designed to be easily panel-mounted in any application environment. It uses the high speed PCI Express bus to transfer digital data to and from the card. The digital I/O is compatible with 8255 PPI chips making it easy to program. This also allows for simple and trouble-free migration from other ACCES PCI and PCI Express digital I/O cards, but also provides for advanced features enabled by the onboard FPGA logic. The card provides three 8-bit I/O ports designated A, B and C. Port C can be further divided into two 4-bit nybbles. Each port can be programmed as inputs or outputs. Change of State (COS) detection and interrupt capabilities are designed to relieve software from polling routines that can consume valuable processing time. Each port can be programmed for detecting state changes on their lines, in which any changes of the enabled port's bits (low-to-high or high-to-low) will generate an IRQ. An ISR (interrupt service routine) then determines which bit changed state and clears the interrupt.

SPECIAL ORDER

Please contact ACCES with your precise requirement. Examples of special orders would be pull-down resistors, conformal coating, a TTL version with user supplied 5VDC VCCIO, custom software or product labelling, and more. We will work with you to provide exactly what is required.

ACCESSORIES

Available accessories include: CAB-mPCIe-DB37M 40-pin to DB37-pin Male cable

ADAP37, STA-37 37-pin Screw Terminal Accessories mPCIe-HDW-KIT2 2mm mounting hardware


SOFTWARE

The card is supported for use in most operating systems and includes a free DOS, Linux , and Windows 2000/XP/2003/Vista/7/8/10 compatible software package. This package contains sample programs and source code in Visual Basic, Delphi, and Visual C++ for Windows. Also provided is a graphical setup program in Windows. Linux support includes installation files and basic samples for programming from user level via an open source kernel driver. Third party support includes a Windows standard DLL interface usable from the most popular application programs, and includes LabVIEW 8.5+ VIs. Embedded OS support includes Windows XPe, WES7, WES8, etc. Full register-level documentation of all features ensures easy compatibility in any application environment.

http://acces.io/

24 Digital I/O with CoS IRQ

PCI Express Mini Card Datasheet


PC Interface

PCI Express Mini Card Type F1 “Full Length” V1.2

Digital Input / Output Interface

Digital Bits 24

Compatibility 8255 Mode 0

Performance 1 µs per 32-bit transaction max ~3.5µs in Windows

Digital Inputs

Logic High Logic Low

2.0V to VCCIO (3.3VDC, 5VDC tolerant) 0V to 0.8V

Digital Outputs (Standard Version)


Power Output

2.0V (min) 24mA source 0.55V (max) 24mA sink +3.3 VDC via 0.5A polyfuse (resetting)

TTL w/user VCCIO 1.65V to 5.5V At DB37M, via polyfuse

Digital Outputs (-TTL Option)


3.8V (min) 32mA UVCCIO = 4.5V 0.55V (max) 32mA UVCCIO = 4.5V

Environmental

Temperature Operating 0° to 70°C (order “-T” for -40° to 85°C)



Power required +3.3VDC @ 330mA (typical)

Physical

Weight 6.2 grams (+ 22.2g for the cable)


Width 30.00mm (1.181“)

I/O connector On-card mating

On cable mating

Molex 501190-4017 40-pin latching Molex 501189-4010 Male, D-Sub Miniature, 37-pin Female, D-Sub Miniature, 37-pin

Assignment Pin Assignment Pin

Fused VCCIO 20 Ground 1

Ground 21 No Connect 2

Port B 7 22 Port C 7 Hi 3




Port B 3 26 Port C 3 Lo 7




Port A 7 30 No Connect 11





Port A 2 35 Fused VCCIO 16

Port A 1 36 Fused VCCIO 17

Port A 0 37 Ground 18

Ground 19

Pins 16 & 17 are connected to 20

ORDERING GUIDE

mPCIe-DIO-24S 24 Digital I/O w/CoS IRQ PCI Express Mini Card

mPCIe-DIO-24 24 Digital I/O PCI Express Mini Card

Add –T to your model # for Industrial Temperature Option (-40° to 85°C)

Add –TTL to your model # for TTL signaling w/user supplied VCCIO (+5V)

http://acces.io/

Isolated Multi-Port RS232 PCI Express Mini Card Data Sheet


FEATURES MODELS MPCIE-ICM232-4 AND MPCIE-ICM232-2

• PCI EXPRESS MINI CARD (MPCIE) TYPE F1, WITH LATCHING I/O CONNECTORS • FOUR AND TWO-PORT MPCIE RS232 SERIAL CARDS WITH OPTIONAL DB9M CONNECTIVITY • 500V ISOLATION PORT-TO-PORT AND 1500V ISOLATION PORT-TO-COMPUTER ON ALL SIGNALS • HIGH PERFORMANCE 16C950 CLASS UARTS WITH 128-BYTE FIFO FOR EACH TRANSMIT AND

RECEIVE BUFFER • SUPPORTS DATA COMMUNICATION RATES TO 921.6KBPS • VIRTUALLY ANY CUSTOM BAUD RATE MAY BE CONFIGURED BY THE USER VIA REGISTER SETTINGS, NO

CUSTOM OSCILLATOR NEEDED • ±15KV ESD PROTECTION ON ALL SIGNAL PINS • SUPPORTS 9-BIT DATA MODE • SUPPORTS CTS AND RTS • ROHS AND INDUSTRIAL TEMP (-40°C TO 85°C) BOTH STANDARD


The mPCIe-ICM232 family of cards feature high performance 16C950-class UARTs. Available in 4-port and 2-port versions, each port is capable of communication speeds up to 921.6kbps and has 128-byte deep transmit and receive FIFOs. Large FIFOs protect against data loss in multitasking operating systems, reduce CPU utilization, and improve data throughput, while reducing or eliminating inter-character or inter-packet pauses. The advanced integrated circuit with pre-scalar supports a wide variety of custom baud rates, and any rates not otherwise achievable can be supported via a custom factory-installed crystal oscillator. The RS232 ports provided by the card are 100% compatible with every other industry-standard serial COM device, supporting TX, RX, RTS, and CTS. In addition, they provide Tru-Iso™ port-to-port and port-to-PC isolation. Communication is possible either with custom application software, with off-the-shelf applications (such as HyperTerminal), or with provided samples and utilities, including WinRISC™ (“Windows Really Incredibly Simple Communication”). The serial ports on the device are accessed using a low-profile, latching, 5-pin Hirose connector. Optional breakout cables are available, and bring each port connection to a panel-mountable DB9-M with an industry compatible RS232 pin-out.

SPECIAL ORDER

Please contact ACCES with your precise requirement. Examples of special orders would be custom oscillators, conformal coating, custom software or product labelling, and more. We will work with you to provide exactly what is required.

ACCESSORIES

Available accessories include: CAB-mPCIe-ICM2 Two port DB-9 cable accessory kit CAB-mPCIe-ICM4 Four port DB-9 cable accessory kit



SOFTWARE

A complete driver support package is provided including an easy-to-use Windows terminal program for testing your COM ports. This simplifies the verification of proper COM port operation. The card installs as standard COM ports in all operating systems including DOS, Linux (including Mac OS X) and 32-bit and 64-bit Windows. Additional drivers may be available for a wide variety of operating systems including Windows CE, please contact the factory for compatibility with your specific OS.

http://acces.io/

Isolated Multi-Port RS232 PCI Express Mini Card Data Sheet


`

PC Interface PCI Express Mini Card Type F1 “Full Length” V1.2

Communications Interface Connector I/O Hirose DF57-5P-1.2V

5-pin, latching Mating Hirose DF57H-5S-1.2C

Serial Ports 4 (or 2) RS-232 UART Quad 16C950

FIFO 128-byte transmit & receive Baud Rates up to 921.6k baud

advanced-prescaler allows a wide variety of unusual baud rates to be achieved


Parity Even, Odd, None, Mark, Space Stop Interval 1, 1½, 2 bits Flow Control RTS/CTS, Xon/Xoff, None

Environmental Temperature Operating -40° to 85°C

Storage -65° to 150°C Humidity 5% to 95%, non-condensing Power required +3.3VDC @ 1.8W (typical) ESD Protection ±15kV on all signal pins

(IEC 61000)

Physical Weight 8 grams Size ,Length 50.95mm (2.006“)

Width 30.00mm (1.181“) The 4-port model violates component height restriction on “bottom” side by up to 1.3mm. Confirm your host PC does not place components under the mPCIe footprint before ordering.

Isolation Tru-Iso™ IPC-221B

port-to-PC 1500 V peak (AC or DC) port-to-port 500 V peak (AC or DC)

Careful attention has been paid to isolation design, including extensive keep-out zones and hand-routed circuit paths, as well as component and material selection.

ORDERING GUIDE

DB-9 Male Pin

Signal Names

Signal Descriptions

1 nc no connect 2 RX Receive Data 3 TX Transmit Data 4 RTS Request To Send 5 GND Signal Ground 6 nc no connect 7 RTS Request To Send 8 CTS Clear To Send 9 nc no connect

DF57 Pin

Signal Names

Signal Descriptions

1 GND Signal Ground 2 TX Transmit Data 3 RX Receive Data 4 RTS Request To

Send 5 CTS Clear To Send

mPCIe-ICM232-4 4-port Isolated RS232 PCI Express Mini Card mPCIe-ICM232-2 2-port Isolated RS232 PCI Express Mini Card SHIPS STANDARD WITH INDUSTRIAL OPERATING TEMPERATURE AND ROHS

14.7456MHzOSCILLATOR

mPCIe

INTERFACE

COM

PUTE

R m

PCIe

EXP

RESS

BUS

INTERRUPT

INTERFACE

16950 / 16550

COMPATIBLE

UART A

DATA ISOLATION RS232

VccIsolated

3.3V

5

Vcc

DATA ISOLATION RS232

Isolated3.3V

5

Ports B and C not shown

Contained in one chip

16950 / 16550

COMPATIBLE

UART D

UART C

UART B

Per-port Tru-Iso isolationIPC-221B

™

DB

9M

OPTIONAL

DB9M

OPTIONAL

TRANSCEIVER

TRANSCEIVER

Port A

Port D

ISOLATEDPOWER

ISOLATEDPOWER

1

6 9

5

DSub 9-pin Male

http://acces.io/

Multi-Port Isolated RS-422 PCI Express Mini Card Data Sheet



• PCI EXPRESS MINI CARD (MPCIE) TYPE F1, WITH LATCHING I/O CONNECTORS • FOUR AND TWO-PORT RS422 MPCIE SERIAL CARDS WITH OPTIONAL DB9M CONNECTIVITY • 500V ISOLATION PORT-TO-PORT AND 1500V ISOLATION PORT-TO-COMPUTER ON ALL SIGNALS • HIGH PERFORMANCE 16C950 CLASS UARTS WITH 128-BYTE FIFO FOR TX AND RX BUFFERING • SUPPORTS DATA COMMUNICATION RATES AS HIGH AS 3MBPS – 12MHZ WITH CUSTOM CRYSTAL • PORT-BY-PORT CUSTOMER CONFIGURABLE TERMINATION • VIRTUALLY ANY CUSTOM BAUD RATE MAY BE CONFIGURED BY THE USER VIA REGISTER SETTINGS, NO

CUSTOM OSCILLATOR NEEDED • ±15KV ESD PROTECTION ON ALL SIGNAL PINS • SUPPORTS 9-BIT DATA MODE • ROHS AND INDUSTRIAL TEMP (-40°C TO 85°C) BOTH STANDARD

FUNCTIONAL DESCRIPTION The mPCIe-ICM422-4 family of cards feature high performance 16C950-class UARTs. Available in 4-port and 2-port versions, each port is capable of communication speeds as high as 3Mbps and has 128-byte deep transmit and receive FIFOs. Large FIFOs protect against data loss in multitasking operating systems, reduce CPU utilization, and improve data throughput, while reducing or eliminating inter-character or inter-packet pauses. The advanced integrated circuit with pre-scalar supports a wide variety of custom baud rates, and any rates not otherwise achievable can be supported via a custom factory-installed crystal oscillator (up to 12Mbps!).

Tru-Iso™ port-to-port and port-to-PC isolation provides a robust solution to common signal level and grounding issues when using long cables to connect computers and other powered devices - up to 500V of difference between pins on adjacent ports, and 1500V between each port and the host computer.



SPECIAL ORDER Please contact ACCES with your precise requirement. Examples of special orders would be custom oscillators, conformal coating, custom software or product labelling, and more. We will work with you to provide exactly what is required.

ACCESSORIES Available accessories include:

CAB-mPCIe-ICM2S Two port DB-9 cable accessory kit CAB-mPCIe-ICM4S Four port DB-9 cable accessory kit



SOFTWARE A complete driver support package is provided including an easy-to-use Windows terminal program for testing your COM ports. This simplifies the verification of proper COM port operation. The card installs as standard COM ports in all operating systems including DOS, Linux (including Mac OS X) and 32-bit and 64-bit Windows. Additional drivers may be available for a wide variety of operating systems including Windows CE, please contact the factory for compatibility with your specific OS.

http://acces.io/







FIFO 128-byte transmit & receive Baud Rates up to 3MBaud

advanced-prescaler allows a wide variety of unusual baud rates to be achieved. Up to 12Mbps via custom crystal option


Parity Even, Odd, None, Mark, Space Stop Interval 1, 1½, 2 bits Flow Control Xon / Xoff, None



(IEC 61000)

Physical Weight 6.4 grams Size Length 50.95mm (2.006“)

Width 30.00mm (1.181“)




ORDERING GUIDE

DB-9 Male Pin

422

1 Tx- 2 Tx+ 3 Rx+ 4 Rx- 5 GND 6 7 Rx- 8 9


Signal Definitions Signal Meanings

no connect Tx+ Differential Transmit + Tx- Differential Transmit -

Rx+ Differential Receive + Rx- Differential Receive -

GND Ground

mPCIe-ICM422-4 4-port RS-422 PCI Express Mini Card mPCIe-ICM422-2 2-port RS-422 PCI Express Mini Card SHIPS STANDARD WITH INDUSTRIAL OPERATING TEMPERATURE AND ROHS

1

6 9

5

DSub 9-pin Male

http://acces.io/




• PCI EXPRESS MINI CARD (MPCIE) TYPE F1, WITH LATCHING I/O CONNECTORS • FOUR AND TWO-PORT RS485 MPCIE SERIAL CARDS WITH OPTIONAL DB9M CONNECTIVITY • 500V ISOLATION PORT-TO-PORT AND 1500V ISOLATION PORT-TO-COMPUTER ON ALL SIGNALS • HIGH PERFORMANCE 16C950 CLASS UARTS WITH 128-BYTE FIFO FOR TX AND RX BUFFERING • SUPPORTS DATA COMMUNICATION RATES AS HIGH AS 3MBPS – 12MHZ WITH CUSTOM CRYSTAL • PORT-BY-PORT CUSTOMER CONFIGURABLE TERMINATION • VIRTUALLY ANY CUSTOM BAUD RATE MAY BE CONFIGURED BY THE USER VIA REGISTER SETTINGS, NO

CUSTOM OSCILLATOR NEEDED • ±15KV ESD PROTECTION ON ALL SIGNAL PINS • SUPPORTS 9-BIT DATA MODE • ROHS AND INDUSTRIAL TEMP (-40°C TO 85°C) BOTH STANDARD

FUNCTIONAL DESCRIPTION The mPCIe-ICM485-4 family of cards feature high performance 16C950-class UARTs. Available in 4-port and 2-port versions, each port is capable of communication speeds as high as 3Mbps and has 128-byte deep transmit and receive FIFOs. Large FIFOs protect against data loss in multitasking operating systems, reduce CPU utilization, and improve data throughput, while reducing or eliminating inter-character or inter-packet pauses. The advanced integrated circuit with pre-scalar supports a wide variety of custom baud rates, and any rates not otherwise achievable can be supported via a custom factory-installed crystal oscillator (up to 12Mbps!).

Tru-Iso™ port-to-port and port-to-PC isolation provides a robust solution to common signal level and grounding issues when using long cables to connect computers and other powered devices - up to 500V of difference between pins on adjacent ports, and 1500V between each port and the host computer.



SPECIAL ORDER Please contact ACCES with your precise requirement. Examples of special orders would be custom oscillators, conformal coating, custom software or product labelling, and more. We will work with you to provide exactly what is required.

ACCESSORIES Available accessories include:

CAB-mPCIe-ICM2S Two port DB-9 cable accessory kit CAB-mPCIe-ICM4S Four port DB-9 cable accessory kit



SOFTWARE A complete driver support package is provided including an easy-to-use Windows terminal program for testing your COM ports. This simplifies the verification of proper COM port operation. The card installs as standard COM ports in all operating systems including DOS, Linux (including Mac OS X) and 32-bit and 64-bit Windows. Additional drivers may be available for a wide variety of operating systems including Windows CE, please contact the factory for compatibility with your specific OS.

http://acces.io/







FIFO 128-byte transmit & receive Baud Rates up to 3MBaud

advanced-prescaler allows a wide variety of unusual baud rates to be achieved. Up to 12Mbps via custom crystal option


Parity Even, Odd, None, Mark, Space Stop Interval 1, 1½, 2 bits Flow Control Xon / Xoff, None



(IEC 61000)

Physical Weight 6.4 grams Size Length 50.95mm (2.006“)

Width 30.00mm (1.181“)




ORDERING GUIDE

DB-9 Male Pin

485

1 2 3 Rx/Tx+ 4 Rx/Tx- 5 GND 6 7 8 9


Signal Definitions Signal Meanings

no connect Rx/Tx+ Dif. half-duplex + Rx/Tx- Dif. half-duplex -

mPCIe-ICM485-4 4-port RS-485 PCI Express Mini Card mPCIe-ICM485-2 2-port RS-485 PCI Express Mini Card SHIPS STANDARD WITH INDUSTRIAL OPERATING TEMPERATURE AND ROHS

1

6 9

5

DSub 9-pin Male

http://acces.io/

Isolated Digital Input & FET Output

PCI Express Mini Card Data Sheet


FEATURES MODELS MPCIE-IDIO-8 MPCIE-IDO-8 AND MPCIE-IDIO-4

PCI EXPRESS MINI CARD (MPCIE) TYPE F1, WITH LATCHING I/O CONNECTORS CHANGE-OF-STATE (COS) DETECTION IRQ GENERATION 9” CABLE (228MM), STANDARD PANEL-MOUNTABLE DB-37F ISOLATION MODULE 8 OR 4 OPTICALLY-ISOLATED NON-POLARIZED INPUTS UP TO 31VDC/AC 8 OR 4 FULLY PROTECTED HIGH-SIDE FET OUTPUTS SWITCH FROM 5 TO 34VDC AT UP TO 2A 8 LVTTL I/O LINES PROGRAMMABLE AS INPUTS OR OUTPUTS IN GROUPS OF 4 LINES AVAILABLE INDUSTRIAL TEMP (-40°C TO +85°C), ROHS STANDARD


The mPCIe-IDIO-8 consists of a type F1 PCI Express Mini Card (mPCIe) interface board that connects to a Mobile-ITX-sized, DB-37F Isolation Module via an included 9” cable. That module is designed to be easily panel-mounted in any application environment. It uses the high speed PCI Express bus to transfer digital data to and from the card. The digital I/O is compatible with 8255 PPI chips making it easy to program. This allows for simple and trouble-free migration from other ACCES PCI and PCI Express digital I/O cards, but also provides for advanced features enabled by the onboard FPGA logic. The mPCIe-IDIO cards are well suited to complex environments, mitigating otherwise challenging ground-loops, high-common-mode, and transient voltage spikes common in electrically-noisy industrial or factory locations. The broad voltage compatibility and high current outputs allows use in a wide range of applications. The non-polarized inputs support both AC and DC, and configuration jumpers allow 4.7ms input filters to be enabled per-channel, as desired – required for AC use. The Isolated Inputs support voltages from 3 to 31 VDC/VAC RMS [40Hz to 10000Hz], as well as standard 12/24 AC control transformer signals. The outputs are fully protected High-Side Power MOSFETs capable of switching from 5 to 34VDC at up to 2A continuous-current load with 10A max current allowed (VBB0 = 5A, VBB1 = 5A).

SPECIAL ORDER

Please contact ACCES with your precise requirement. Examples of special orders would be conformal coating, custom software or product labelling, and more. We will work with you to provide exactly what is required.

ACCESSORIES

Available accessories include: ADAP37M, STB-37 37-pin Screw Terminal Accessory mPCIe-HDW-KIT2 Mounting hardware for 2mm

mPCIe-HDW-KIT2.5 Mounting hardware for 2.5mm

SOFTWARE


http://acces.io/

Isolated Digital Input & FET Output



PC Interface

PCI Express Mini Card Type F1 “Full Length”

Note: Device’s connector violates component height restrictions

Isolated Inputs

Number 8 (or 4)

Type Non-polarized, optically isolated from each other and from the computer (CMOS compatible)

Voltage 3 to 31 DC or AC RMS (40 to 10000Hz)

Isolation 500V channel-to-ground and channel-to-channel

Resistance 1.8KΩ in series with opto-coupler

Filter Response Rise-time Fall-time

4.7 ms 4.7 ms

No-Filter Rise-time Fall-time

10 µs 30 µs

FET Outputs & Digital I/O Lines

Number 8 (or 4)

Type High Side Power MOSFET Switch. Protected against short-circuit, over-temp, ESD; drives inductive loads.

Voltage Range 5-34VDC recommended (customer supplied) for continuous use, 40VDC absolute maximum

Current Rating 2A maximum

Turn On time 90µsec (typical)

Turn Off time 110µsec (typical)

Digital Inputs 8 or 4 LVTTL


2.0V to VCCIO (3.3VDC, 5VDC tolerant) 0V to 0.8V

Digital Outputs 8 or 4 LVTTL


2.0V (min) 24mA source 0.55V (max) 24mA sink

Environmental

Temperature Operating 0°C to 70°C (order “-T” for -40° to 85°C)



Power required +3.3VDC @ 360mA (typical)

Physical

mPCIe board characteristics

Weight 6.2 grams


Width 30.00mm (1.181“)


Molex 501190-4017 40-pin latching Molex 501189-4010

Isolation Module characteristics

Weight 38.2 grams (+ 11.2 grams for the 9” cable)

Size (Mobile-ITX sized)

Length 2.952”

Width 1.772”

I/O connector On-module mating

Female, D-Sub Miniature, 37-pin Male, D-Sub Miniature, 37-pin

Signals noted with an * are present both on the DB37F connector, and a 3 position screw terminal for connecting the external 5 to 34VDC power supply. Total amperage allowed is 10A (VBB0 = 5A, VBB1 = 5A).

ORDERING GUIDE

DB-37 Female Pinout

1 IN A 7

2 IN A 6 20 IN B 7

3 IN A 5 21 IN B 6

4 IN A 4 22 IN B 5

5 IN A 3 23 IN B 4

6 IN A 2 24 IN B 3

7 IN A 1 25 IN B 2

8 IN A 0 26 IN B 1

9 GND 27 IN B 0

10 LVTTL 0 28 LVTTL 4




14 VBB 0* 32 RETURN*

15 VBB 0* 33 VBB 1*

16 OUT + 0 34 OUT + 4

17 OUT + 1 35 OUT + 5

18 OUT + 2 36 OUT + 6

19 OUT + 3 37 OUT + 7

Signal Definitions

Signal Meanings

IN A Non-Polarized Isolated Input “A” Side

IN B Non-Polarized Isolated Input “B” Side

OUT + FET Output pin

RETURN OUT - for all FETs (0-7)*

VBB 0 Compliance Voltage for FETs 0-3*

VBB 1 Compliance Voltage for FETs 4-7*

LVTTL I/O Digital I/O pin (3.3VDC, +5VDC tolerant)

mPCIe-IDIO-8 8 Isolated Input, 8 FET Output mPCIe Card

mPCIe-IDO-8 8 FET Outputs mPCIe Card

mPCIe-IDIO-4 4 Isolated Input, 4 FET Output mPCIe Card


http://acces.io/

Isolated Digital Input & Relay Output



FEATURES MODELS MPCIE-IIRO-8 AND MPCIE-IIRO-4

PCI EXPRESS MINI CARD (MPCIE) TYPE F1, WITH LATCHING I/O CONNECTORS CHANGE-OF-STATE (COS) DETECTION IRQ GENERATION 9” CABLE (228MM), STANDARD PANEL-MOUNTABLE DB-37M ISOLATION MODULE 8 OR 4 OPTICALLY-ISOLATED NON-POLARIZED INPUTS 8 OR 4 ELECTROMECHANICAL 1A RELAY OUTPUTS AVAILABLE INDUSTRIAL TEMP (-40°C TO +85°C), ROHS STANDARD


The mPCIe-IIRO-8 consists of a type F1 PCI Express Mini Card (mPCIe) interface board that connects to a Mobile-ITX-sized, DB-37M Isolation Module via an included 9” cable. That module is designed to be easily panel-mounted in any application environment. It uses the high speed PCI Express bus to transfer digital data to and from the card. The digital I/O is compatible with 8255 PPI chips making it easy to program. This allows for simple and trouble-free migration from other ACCES PCI and PCI Express digital I/O cards, but also provides for advanced features enabled by the onboard FPGA logic. The mPCIe-IIRO cards are well suited to complex environments, mitigating otherwise challenging ground-loops, high-common-mode, and transient voltage spikes common in electrically-noisy industrial or factory locations. The broad voltage compatibility and high current outputs allows use in a wide range of applications. The non-polarized inputs support both AC and DC, and configuration jumpers allow 4.7ms input filters to be enabled per-channel, as desired – required for AC use. The Isolated Inputs support voltages from 3 to 31 VDC/VAC RMS [40Hz to 10000Hz], as well as standard 12/24 AC control transformer signals. Outputs are 5 Form C (“Single-pole, double-throw”, or SPDT) and 3 Form A (SPST) electromechanical relays capable of 1A continuous-current load.

SPECIAL ORDER

Please contact ACCES with your precise requirement. Examples of special orders would be conformal coating, custom software or product labelling, and more. We will work with you to provide exactly what is required.

ACCESSORIES

Available accessories include: ADAP37, STB-37 37-pin Screw Terminal Accessory

mPCIe-HDW-KIT2 Mounting hardware for 2mm mPCIe-HDW-KIT2.5 Mounting hardware for 2.5mm

SOFTWARE


http://acces.io/

Isolated Digital Input & Relay Output



PC Interface

PCI Express Mini Card Type F1 “Full Length”

Note: Device’s connector violates component height restrictions

Isolated Inputs

Number 8 (or 4)

Type Non-polarized, optically isolated from each other and from the computer (CMOS compatible)

Voltage 3 to 31 DC or AC RMS (40 to 10000Hz)

Isolation 500V channel-to-ground and channel-to-channel

Resistance 1.8KΩ in series with opto-coupler

Filter Response Rise-time Fall-time

4.7 ms 4.7 ms

Non-Filter Response Rise-time Fall-time

10 µs 30 µs

Relay Outputs

Number 8 (or 4)

Type 5 Form C (SPDT) and 3 Form A (SPST), Ag with Au clad, single crossbar for mPCIe-IIRO-8; 4 Form C for mPCIe-IIRO-4

AC Load 0.5A at 125 VAC (62.5 VA max)

DC Load 1A at 24 VDC (30W max)

Switching Voltage 125 VAC, 60 VDC, max

Switching Current 1A max

Contact Resistance 100 mΩ, max

Contact Life 5 million operations, min

Environmental Temperature Operating 0°C to 70°C (order “-T” for -40° to 85°C)



Power required +3.3VDC @ 730mA typ., all relays on

Physical mPCIe board characteristics

Weight 6.2 grams


Width 30.00mm (1.181“)


Molex 501190-4017 40-pin latching Molex 501189-4010

Isolation Module characteristics

Weight 51.4 grams (+ 11.2 grams for the 9” cable)

Size (Mobile-ITX sized)

Length 2.952”

Width 1.772”

I/O connector On-module mating

Male, D-Sub Miniature, 37-pin Female, D-Sub Miniature, 37-pin

The mPCIe-IIRO Family DB-37M pinout is identical to the ACCES PCI-IIRO-8 and PCIe-IIRO-8 pinout.

ORDERING GUIDE

DB-37M Male Pinout

1 IN A 7

20 IN B 7 2 IN A 6

21 IN B 6 3 IN A 5

22 IN B 5 4 IN A 4

23 IN B 4 5 IN A 3

24 IN B 3 6 IN A 2

25 IN B 2 7 IN A 1

26 IN B 1 8 IN A 0

27 IN B 0 9 C 7

28 NO 7 10 C 6

29 NO 6 11 C 5

30 NO 5 12 NC 4

31 C 5 13 NO 4

32 NC 3 14 C 3

33 NO 3 15 NC 2

34 C 2 16 NO 2

35 NC 1 17 C 1

36 NO 1 18 NC 0

37 C 0 19 NO 0

Signal Definitions

Signal Meanings

IN A Non-Polarized Isolated Input “A” Side

IN B Non-Polarized Isolated Input “B” Side

C Relay Common pin

NO Relay Normally Open pin

NC Relay Normally Closed pin

mPCIe-IIRO-8 8 Isolated Input, 8 Relay Output mPCIe Card

mPCIe-IIRO-4 4 Isolated Input, 4 Relay Output mPCIe Card


http://acces.io/

Documents

Multi-Port RS-232/422/485 PCI Express Mini Card Data Sheet