Directions to Plant: Plant is located 30 miles North of Cincinnati Airport. From Airport take Rte I-275 East 3.5 Miles to Rte I-75 North 24 Miles To Rte I-275 East 1 Mile. Take 1st Exit #44, Mosteller Rd. Right 1 Mile to Left on Crescentville Rd., .8 Mile to Right onto International Blvd. 2nd Road on Left

On-Site Terms: 25% deposit cash, ctfd ck or bank letter honoring payment w/ unctfd cks. 13% Buyer’s Premium onsite. Other terms at sale.

Webcast Terms: ALL on-line bidders MUST provide a 25% deposit up front with auctioneer’s office by Tuesday October 18th at Noon to be approved to bid. A 16% Buyer’s Premium will apply

To arrange inspection contact auctioneers officeRegister to bid: www.josephfinn.com

Important Notice: All items sold at this sale are sold without warranty or representation whatsoever, INCLUDING WITHOUT LIMITATION, any warranty or representation as to description, title or capacity. All items are sold as is where is, auctioneer expressly disclaims the implied warranties or merchantability and fitness for a particular purpose.

PUBLIC AUCTION SALEPUBLIC AUCTION SALE • ONSITE AND WEBCAST

FLEXTECH PACKAGING, LTD10095 INDUSTRIAL BLVD.

CINCINNATI, OHIOWed.Ê Oct Ê 19th Ê at Ê 10:30 Ê am

Inspection:Ê Tues.Ê Oct Ê 18,Ê 9-5 Ê or Ê by Ê appt

MULTI-LAYER BLOWN FILM PLANT2002 ALPINE 80” 7 LAYER LINE1998 ALPINE 80” 5 LAYER LINE

2005 RULLI STANDARD 1800MM 5 LAYER LINESLITTER • PELLETIZERS • CHILLERS

LABORATORY • PELLET AND PLANT EQUIPMENT

Proxy Bid: Auctioneer will accept proxy bids for those unable to attend this sale. Bids must be accompanied by a deposit of 25% of bid in certified check or bank letter honoring payment with uncertified checks.

1998ALPINE 80” 7 LAYER EXTRUSION LINE

ALPINE 80” 5 LAYER EXTRUSION LINE

2002

TRIM RECLAIM(2) 2005 MACCHI Recotrim OP1610-1 Trim Reclaim Twin Screw Extrusion Pelletizers w/Dryers, s/n 05059, 05035, 90#/Hour

FOREMOST HSFG1116 15 HP Trim Grinder w/Pull Rolls, s/n 39119; PROCESS CONTROL 15 HP Trim Grinder w/Blower

MISC. EQUIP.(3) CRG LOGICS 3500# Bins, 7.5 HP Vacuum Pump, Filter, Control PanelCH 5KTA 60” Treater, 2 Side, Generator (New)AMPLAS 48” Driven Unwind w/Edge Guide Unit2006 CORE TECHNOLOGIES 9190 Core Cutter, s/n 12312, 3” & 6”Special Built Core Cutter, 6”(2) FOREMOST 10 HP Vacuum Pumps, CONAIR 10 HP Vacuum PumpQUICK DRAFT Blowers, Filters, BLOAPCO Blower, FIFE Edge Guides, PILLAR 64” Treater Box

SLITTER1999 DUSENBERY 835L-3 64” Cantilever Duplex Slitter Rewinder, s/n 59556, AC Vector Drives, Guided Unwind, Amplas 4-Head Slit Sealer, Quick Draft Blower

Overhead Roll Handling System, (2) Electric Hoists, ¼ & 1 Ton HoistsMSI Challenger 2 10,000# Digital Hanging ScaleTILT LOCK LS1-3 Roll Lift, s/n 11596

SILOS(2) 1998 A.O. SMITH Welded Steel Silos, 14’x47’, 5810 Cu. Ft., s/n 80067, 80068

RAILROAD CAR4-Compartment, (2) 1138 Cu. Ft., (2) 1487 Cu. Ft., 196,000 ID IMT, 67,000 IT WT

MAINT. EQUIP.JET Mill Drill, MILLER & LINCOLN Welders, Band Saws, Hyd. Press, Belt Grinders, Power & Hand Tools, Hardware, Supplies

PUBLIC AUCTION SALEFLEXTECH PACKAGING10095 INDUSTRIAL BLVD.

CINCINNATI, OHIOWed.Ê OctÊ 19thÊ

StartingÊ atÊ 10:30Ê aminspection:Ê Tues.Ê OctÊ 18,Ê 9-5Ê orÊ byÊ appt

Register to bid on-line

JOSEPH FINN CO., INC.

Auction & Appraisal ServicesIf you have idle or surplus assets, a surplus division, or an entire facility to liquidate, talk to us first. Our certified appraisal staff will answer these questions for you. We provide prompt, accurate and confidential appraisals of your assets at Replacement, In-place, Fair Market, Orderly Liquidation and/or Auction Values

DUSENBERY 835L-3 64” Slitter

1 of 2 MACCHI Recotrim Systems

CORE TECH 9190 Core Cutter

CH 5KTA 60” 2 Side Treater

CRG Logic Bins, Pump, Control2 Steel Silos 4 Compartment Railroad Car

1999

2005

2006

NEW

LABORATORY2001 MOCON Ox-Tran 2/20 MJ Oxygen Permeability Tester, s/n 0101AG0921998 MOCON Ox-Tran 2/620 MT Oxygen Permeability Tester, s/n 1297BN0111998 MOCON Permatran 3/60 MN Water Vapor Permeability Tester, s/n 1297BP0082005 THWING ALBERT EJA1750 Tensile Tester, s/n 522052001 BYK GARDNER 4725 Haze Guard Plus Tester, s/n 984653(2) 1998 THWING ALBERT Friction Peel Testers, s/n 47780, 474501998 MICROM HM310 Microtome, s/n 130891998 CARL ZEISS Axioskop 20 Microscope, s/n 123850(2) DYNISCO/THELLER HT Heat Sealers, s/n 98237 (2000), 93156 (1998)1998 IMS GELBO 5000ES Flex Tester, s/n 13664DYNISCO/THELLER D Mini Tensile Tester; METTLER TOLEDO FP52HT Hot Stage; TECHNIDYNE BNL-3 Opacimeter; ELMENDORF 1600 Tear Tester; DYNISCO Drop Dart Tester; JDC Sample Cutters; Balance, Scales; BLUE M Oven; Lab Bath; BYK Micro Gloss; Micrometers; Lab Tables

CHILLERS1999 AEC PINN-3-90RQ Pinnacle Series 90 Ton Chiller, 6x15 Ton, Tank, Pumps, Filter, s/n 31G0226 (Rebuilt)1999 AEC PINN-3-90RG Pinnacle Series 90 Ton Chiller, 6x15 Ton, Tank,Pumps, Filter

COMPRESSORSQUINCY QSF50ANA32B 50 HP Rotary Air Compressor, s/n QN049291ZEKS 250NCGA400 Air Dryer, s/n 241756; QUINCY 20 HP Tank-Mtd. Air Compressor, s/n 91870J, Quincy Q1FD Dryer; (2) Vertical Steel Air Tanks

PLANT EQUIP.WULFTEC WIP150 Pallet Stretch Wrapper, s/n 1099-5100; METTLER TOLEDO Panther 10,000# Floor Scale, 48” x 48”; 360º Jib Crane, Hydraulic Pallet Jacks, Vacuums, Pallet Shelving, Ladders, Strap Trucks, Fans, Cabinets, Carts

T-A Tensile Tester

VIEW OF MOCON PERMEABILITY TESTERS

Auction & Appraisal ServicesIf you have idle or surplus assets, a surplus division, or an entire facility to liqui-

date, talk to us first. Our certified appraisal staff will answer these questions for

you. We provide prompt, accurate and confidential appraisals of your assets at

Replacement, In-place, Fair Market, Orderly Liquidation and/or Auction Values

VIEW OF LABORATORY EQUIPMENT

1 OF 2 AEC 90 TON CHILLERS

QUINCY 50 HP ROTARY AIR COMPRESSORWULFTEC Wrapper

2002 ALPINE 80” 7 LAYER BLOWN FILM EXTRUSION LINE

Custom Built 80” MDO will be offered separately

2002 ALPINE 7-Layer, 80” Blown Film Extrusion Line, (2) 75mm, 30:1,

Air Cooled Extruders, 125 HP DC Drives, (2) 65mm, 30:1,

Air Cooled Extruders, 100 HP DC Drives, (3) 50mm, 30:1, Air Cooled

Extruders, 60 HP DC Drives, All w/Hydraulic Screen Changers,

400mm 7-LayerÊ AlpineÊ IBC Die, Controls, Addex Dual Lip Air Ring,

Automatic Gauge Control, Bubble Cage, Poly Cools & Blowers,

Tower, 80” Oscillating Haul Off, Secondary Nip, (2) Pillar Treaters,

Dual Side, Generator, Computerized Line Control, RheinholdÊ ASKII-200

80” Robotic Controlled Face-to-Face Center Surface Winders, Auto

Cut Forward & Reverse, 40” Diameter, Doffing Table, Shaft Extrac-

tors, (2) Trim Blowers, (7) Plast Control Gravimetric Blenders, Fore-

most ASR, Auto Loss in Weight Control, Custom Built 80” Machine

Direction Orienter (MDO),Ê Siemens Control, (4) Web Paths, Budzar &

Advantage Temperature Controls (Original

Equipment Cost: 2002 Alpine Extrusion Line $2,900,000.00;

2002 Custom Built MDO $750,000.00)

1998 ALPINE 80” 5 LAYER BLOWN FILM EXTRUSION LINE

Black Clawson 80” MDO will be offered separately

1998Ê ALPINE 5-Layer, 80” Blown Film Extrusion Line, (3)

65mm, 30:1, Air Cooled Extruders, 100 HP Reliance DC

Drives, (2) 50mm, 30:1, Air Cooled Extruders, 60 HP Reli-

ance DC Drives, All w/Hydraulic Screen Changers, Alpine

400mm 5-Layer IBC Die, Bubble Cage, Addex Dual Lip Air

Ring, Automatic Gauge Control, Poly Cools, Blowers, 80”

Oscillating Haul Off, Secondary Nip, (2) Pillar Treaters, Dual

Side, (2) Enercon Generators, E&L Edge Guide, Computer-

ized Line Control, 2007 Alpine 64” Back-to-Back Center

Surface Winders, Siemens Control, Trim Blowers, (5) Fore-

most Gravimetric Blenders, Auto Weight in Loss Control,

1998 Black Clawson 80” Machine Direction

Orienter (MDO), 4 Web Paths, Control, Advantage

Temperature Controls (Original Equipment Cost:

1998 Alpine Extrusion Line $2,100,000.00; 2007 Alpine

Winder $450,000.00; 1998 BlackÊ Clawson MDO

$675,000.00)

2005 RULLI STANDARD 1800MMBLOWN FILM EXTRUSION LINE

2005Ê RULLIÊ STANDARD 5-Layer, 1800mm Blown Film Extru-

sion Line, (2) 2.5”, 30:1, Air Cooled Extruders, 100 HP,

AC VS Drives, (3) 50mm, 30:1, Air Cooled Extruders, 60

HP, AC VS Drives, All w/Pneu. Screen Changers, 5-Layer,

350mm IBC Die, Dual Lip Air Ring, Bubble Cages, Poly

Cools, Blowers, Tower, 1800mm Oscillating Haul Off, E&L

Edge Guide, Dual Sided Treater w/Generator, Enercon

Bare Roll Treater on Winder, Secondary Nip, Rulli Standard

1800mm Back-to-Back Center Surface Winders, Auto Cut,

Trim Blowers, 36-Zone Control Panel, (5) CRG Gravimet-

ric Blenders & Loaders, CRG 7.5 HP Vacuum Pump, Auto

Weight in Loss Control (Original Equipment Cost: 2005

RulliÊ Standard Extrusion Line $1,300,000.00)

PUBLIC AUCTION SALEFLEXTECH PACKAGING, LTD

10095 INDUSTRIAL BLVD.CINCINNATI, OHIO

Wed.Ê OctÊ 19th,Ê StartingÊ atÊ 10:30Ê amInspection:Ê Tues.Ê OctÊ 18,Ê 9-5Ê orÊ byÊ appt

To arrange inspection contact auctioneers office

Register to bid: www.josephfinn.com