4
wireless embedded boards Last Updated: 29/03/2016 Multi-function IPQ4029 Embedded Board with on-board Wireless 638MHz CPU / 5x GE Port / 1x MiniPCI-e / Dual Band 802.11ac Wave 2 Specifications Chipset CPU: Qualcomm Atheros IPQ4029 638MHz System Memory 256MB DDR3 NAND Flash 128MB NOR Flash 16MB Wireless Built-in 2.4GHz 802.11b/g/n at 23dBm (aggregate), 2x U.FL connectors Built-in 5GHz 802.11ac/a/n at 23dBm (aggregate), 2x U.FL connectors Total 4x U.FL connectors Expansion 1x USB 3.0 1x USB 2.0 1x Mini PCI-e slot Interface 5x Gigabit Ethernet Port 1x Serial Port via UART0 12 Pin Connector 1 1x JTAG 20 Pin Connector 2 Reset Button 1x H/W Reset Button 1x S/W Reset Button LED 9x LED Indicators Power Over Ethernet N/A DC Power 1x DC Jack Connector: 12V Power Consumption TBA Operating System QCA Reference Firmware Certification RoHS Compliance Environmental Temperature: Operating: -20ºC to 70ºC, Storage: -40ºC to 90ºC Humidity (non-condensing): Operating: 5% to 95%, Storage: Max. 90% Dimensions (W x D x H) 176 x 129 x 28.5 mm 1.The UART0 Port is a 12-pin header (TTL). A Serial Converter is available to change the TTL signals on the board to RS-232 signals for debugging. 2.The JTAG Port is a 20-pin header. A JTAG kit is for writing your self-developed loader and firmware directly. *Configurations are subject to change without notifications. Model: CPX-DK04 APPLICATIONS 802.11 ac/a/b/g/n Access Point Point-to-Point High Capacity Wireless Bridge Point-to-MultiPoint High Capacity Wireless Bridge Wireless Base Station Wireless Customer-Premises Equipment (CPE) KEY FEATURES Qualcomm Atheros IPQ4029 Quad-core ARM cortex-A7 638MHz CPU 256MB System Memory 128MB NAND Flash 16MB NOR Flash On-board 2.4GHz max 20dBm output power (per chain) On-board 5GHz max 20dBm output power (per chain) IEEE 802.11ac/a/b/g/n compliant Onboard 2x2 5GHz radio, up to 867Mbps physical data rate Onboard 2x2 2.4GHz radio, up to 300Mbps physical data rate

Multi-function IPQ4029 Embedded Board with on-board ... · QCA Reference Firmware IPQ4029 DC: 12 V US JTAG Programmer JTAG 20 Pin to Parallel Port bridge Serial Port Converter Serial

  • Upload
    others

  • View
    5

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Multi-function IPQ4029 Embedded Board with on-board ... · QCA Reference Firmware IPQ4029 DC: 12 V US JTAG Programmer JTAG 20 Pin to Parallel Port bridge Serial Port Converter Serial

wireless embedded boards

Last Updated: 29/03/2016

Multi-function IPQ4029 Embedded Board with on-board Wireless638MHz CPU / 5x GE Port / 1x MiniPCI-e / Dual Band 802.11ac Wave 2

SpecificationsChipset CPU: Qualcomm Atheros IPQ4029 638MHz

System Memory 256MB DDR3

NAND Flash 128MB

NOR Flash 16MB

Wireless Built-in 2.4GHz 802.11b/g/n at 23dBm (aggregate), 2x U.FL connectorsBuilt-in 5GHz 802.11ac/a/n at 23dBm (aggregate), 2x U.FL connectorsTotal 4x U.FL connectors

Expansion 1x USB 3.01x USB 2.01x Mini PCI-e slot

Interface 5x Gigabit Ethernet Port1x Serial Port via UART0 12 Pin Connector1

1x JTAG 20 Pin Connector2

Reset Button 1x H/W Reset Button1x S/W Reset Button

LED 9x LED Indicators

Power Over Ethernet N/A

DC Power 1x DC Jack Connector: 12V

Power Consumption TBA

Operating System QCA Reference Firmware

Certification RoHS Compliance

Environmental Temperature: Operating: -20ºC to 70ºC, Storage: -40ºC to 90ºCHumidity (non-condensing): Operating: 5% to 95%, Storage: Max. 90%

Dimensions (W x D x H) 176 x 129 x 28.5 mm1.The UART0 Port is a 12-pin header (TTL). A Serial Converter is available to change the TTL signals on the board to RS-232 signals for debugging.

2.The JTAG Port is a 20-pin header. A JTAG kit is for writing your self-developed loader and firmware directly.

*Configurations are subject to change without notifications.

Model: CPX-DK04

APPLICATIONS

• 802.11 ac/a/b/g/n Access Point

• Point-to-Point High Capacity Wireless Bridge

• Point-to-MultiPoint High Capacity Wireless Bridge

• Wireless Base Station

• Wireless Customer-Premises Equipment (CPE)

KEY FEATURES

• Qualcomm Atheros IPQ4029 Quad-core ARM cortex-A7

638MHz CPU

• 256MB System Memory

• 128MB NAND Flash

• 16MB NOR Flash

• On-board 2.4GHz max 20dBm output power (per chain)

• On-board 5GHz max 20dBm output power (per chain)

• IEEE 802.11ac/a/b/g/n compliant

• Onboard 2x2 5GHz radio, up to 867Mbps physical data rate

• Onboard 2x2 2.4GHz radio, up to 300Mbps physical data rate

Page 2: Multi-function IPQ4029 Embedded Board with on-board ... · QCA Reference Firmware IPQ4029 DC: 12 V US JTAG Programmer JTAG 20 Pin to Parallel Port bridge Serial Port Converter Serial

2

wireless embedded boards

Compex Systems Pte Ltd | www.compex.com.sg | (+65) 6286 2086 | [email protected] | Last Updated: 29/03/2016 WH JK HB

Copyright © Compex Systems. All rights reserved. COMPEX and the COMPEX logo, are registered trademarks of Compex Inc.Atheros and other trademarks are properties of their respective owners. While every effort is made to ensure the information is accurate,

Compex does not accept liability for any errors or mistakes that may arise. All specifications are subject to change without notice.

RF Performance Table

Onboard2.4GHzRadio

Data Rate Power (Per Chain)

Transmit Power

11B_1Mbps 20dBm11G_6Mbps 20dBm11G_54Mbps 17dBm

11AC_VHT20_MCS0 20dBm11AC_VHT20_MCS8 14dBm11AC_VHT40_MCS0 20dBm11AC_VHT40_MCS9 14dBm

Receiver Sensitivity

11B_1Mbps -99dBm11G_6Mbps -91dBm

11AC_VHT20_MCS0 -92dBm11AC_VHT20_MCS8 -70dBm11AC_VHT40_MCS0 -89dBm11AC_VHT40_MCS9 -66dBm

Onboard5GHzRadio

Data Rate Power (Per Chain)

Transmit Power

11A_6Mbps 20dBm11A_54Mbps 19dBm

11AC_VHT20_MCS0 20dBm11AC_VHT20_MCS8 17dBm11AC_VHT40_MCS0 20dBm11AC_VHT40_MCS9 17dBm11AC_VHT80_MCS0 20dBm11AC_VHT80_MCS9 17dBm

Receiver Sensitivity

11A_6Mbps -93dBm11A_54Mbps -78dBm

11AC_VHT20_MCS0 -92dBm11AC_VHT20_MCS8 -70dBm11AC_VHT40_MCS0 -89dBm11AC_VHT40_MCS9 -66dBm11AC_VHT80_MCS0 -86dBm11AC_VHT80_MCS9 -62dBm

Page 3: Multi-function IPQ4029 Embedded Board with on-board ... · QCA Reference Firmware IPQ4029 DC: 12 V US JTAG Programmer JTAG 20 Pin to Parallel Port bridge Serial Port Converter Serial

3

wireless embedded boards

Compex Systems Pte Ltd | www.compex.com.sg | (+65) 6286 2086 | [email protected] | Last Updated: 29/03/2016 WH JK HB

Copyright © Compex Systems. All rights reserved. COMPEX and the COMPEX logo, are registered trademarks of Compex Inc.Atheros and other trademarks are properties of their respective owners. While every effort is made to ensure the information is accurate,

Compex does not accept liability for any errors or mistakes that may arise. All specifications are subject to change without notice.

Component Map

9 x LED Indicators

USB 3.0Port

UART 0

UART 1

JTAG 20 PinConnector

DC Jack 12V LAN0 LAN1 LAN2 LAN3 WAN Port

H/W ResetButton

S/W Reset Button

USB 2.0Port

5GHz 2x U.FLConnectors

2.4GHz 2x U.FLConnectors

Front Panel

Rear Panel

MiniPCI-e Slot

Page 4: Multi-function IPQ4029 Embedded Board with on-board ... · QCA Reference Firmware IPQ4029 DC: 12 V US JTAG Programmer JTAG 20 Pin to Parallel Port bridge Serial Port Converter Serial

4

wireless embedded boards

Compex Systems Pte Ltd | www.compex.com.sg | (+65) 6286 2086 | [email protected] | Last Updated: 29/03/2016 WH JK HB

Copyright © Compex Systems. All rights reserved. COMPEX and the COMPEX logo, are registered trademarks of Compex Inc.Atheros and other trademarks are properties of their respective owners. While every effort is made to ensure the information is accurate,

Compex does not accept liability for any errors or mistakes that may arise. All specifications are subject to change without notice.

Packaging Information

Packaging Type Dimensions Nett Weight Gross Weight

Carton Box (5 units) 422 x 410 x 240 mm 4.91 kg 5.43 kg

Ordering OptionsItem Code Firmware Processor Power Solutions Power Supply

CPX-DK04 PR32F512R-ETE QCA Reference Firmware IPQ4029 DC: 12 V EU

CPX-DK04 PR32F512R-UTE QCA Reference Firmware IPQ4029 DC: 12 V US

JTAG Programmer JTAG 20 Pin to Parallel Port bridge

Serial Port Converter Serial 4 Pin (from UART0 12 Pin) to COM Port bridge

Firmware / SoftwareThe AP-DK04 is shipped with QCA Reference firmware.

Supported Operating System • QCA Reference Firmware

1. QCA Reference Firmware is available without any technical support by Compex unless otherwise stated.