Click here to load reader
Upload
nguyenkhanh
View
212
Download
0
Embed Size (px)
Citation preview
Catalog Number:MSV-PVGInstruction Sheet: 93066029
Spaulding Lighting701 Millennium BlvdGreenville, SC 29607
Technical Support: (864) 678-1000Fax: (864) 898-1065
www.spauldinglighting.com
MSV-PVG Polycarbonate Vandal GuardMSV M-PULSIVE ACCESSORY
SPRING LOCK
Warning: Disconnect power before installation or servicing.
SCREW
POLYCARBONATESHIELD (A)
SUPPORTBRACKET (B)
LENS
DOOR FRAME (C)
SCREW
NUT
FLAT WASHER
Mounting Notes:Open and remove door assembly.Remove paper liner from polyshield (A)Assemble brackets (B) to polyshield as shown.Mark the side of door frame (C) at middle of both longsides.Place the assembled polyshield to the door frame.Starting at the middle, drill the door frame at one wallonly using 0.141" dia drill by 0.312" deep.Fasten the bracket (B) to the frame using 10-24screws and other hardware provided (D).CAUTION: Do not over tighten to previent stripping.Repeat drilling for all remaining brackets.With PVG shield installed, reattach the door to thefixture using the spring locks.
1.2.3.4.
5.6.
7.
8.9.
Shipping Package Contents:PVG Shield (1)Spacer Bracket (6)10-24 Screw (6)10-24 Nut (6)1/4 Flat Washer (12)8-18 Screw (6)
Material: SteelFinish: Powder PaintWeight: 8 lbsEPA: .1 ft2
PVG SHIELD
SPACER BRACKET
NUT
8-18 SCREW
DOOR
10-24 SCREW
FLAT WASHER
19.50
19.50
15.75
19.00