Upload
abel-hodges
View
223
Download
1
Embed Size (px)
Citation preview
LT ThomasTJ Volinski
Pat O’HaraKole Reece
MSP430 Motor Controller Applications
Design Team 6 2
Outline
• H-Bridge• Types of Motors Polarity• Stepper Motor• Brushed Motor• Brushless Motor• Permanent Magnet Motor• AC Induction Motor
4/1/2011
Design Team 6 3
Speed Controller
• Definition Closed Loop Vs Open Loop• How do we Implement motor control• Protection • Switching Mechanism– Bipolar Operation – Unipolar Operation
• Pulse Generator
2/16/2011
Design Team 6 4
System Diagram
2/16/2011
Design Team 6 5
Unipolar
2/16/2011
Design Team 6 6
Bipolar
2/16/2011
Design Team 6 7
Schematic Implementation
2/16/2011
Design Team 6 8
Types Of Polarity
• Axial & Radial Flux
4/1/2011
Design Team 6 9
Stepper Motors
• Introduced in the 1960’s• Replace Servos
• Advantages– Long Life– Excellent Low Speed– High Speed Protection
• Disadvantages– High Power– Big Size for Lower Power
4/1/2011
Robotgear.com
N
Design Team 6 10
Torque Control
4/1/2011
Design Team 6 114/1/2011
Design Team 6 12
Motor Controller
• DRV88xx• Steps
• 8 to 45 Volts, 2.5 A
4/1/2011
Full1/2
1/41/8
1/161/32
Design Team 6 13
MSP430 Applications
4/1/2011
Design Team 6 14
Brushed DC Motor
4/1/2011
• Stator has permanent magnets• Rotor has coil, creates EMF• Half rotation is sensed with,
commutator. • Actually AC motor.
Design Team 6 15
Brushed DC Motor
4/1/2011
• 2 Brushes stillshort out
• Still have 4 loopsof conducting
Design Team 6 16
Brushless DC Motor
4/1/2011
• Coils on the Stator• Permanent Magnet on Rotor• Motor topology is
nondetermistic
Design Team 6 17
Brushless DC Motor
4/1/2011
• Add more phases to stator• Run current through different phases.
Design Team 6 18
Brushless DC Motor
4/1/2011
• Hall effect sensors detect transitions from North to South poles.
• 3 sensors provide binarydata. Never get 000or 111 therefore use aserror codes.
Design Team 6 19
Permanent Magnet Motor
• AC Motor• Sinusoidal Windings on Stator• 3-Phase: each winding coexists together
4/1/2011
Design Team 6 20
Permanent Magnet Motor
• Field Oriented Control– Calculate the rotor flux– Calculate current of A,B,C windings to make current vector 90 degrees
of rotor flux.– Magnitude of current vector can be adjusted for different speeds
• Used in applications where a small motor is needed• Uses less power than other motors
4/1/2011
Design Team 6 21
AC Induction Motor
• Rotor and Stator both have windings• Asynchronous Motor
– Magnetic field must rotate faster than rotor – Motor can slow down or slip
• Field Oriented Control or V/Hz– 16-bit microcontroller used for V/Hz– 32-bit microcontroller used for FOC
• Most popular motor in consumer and industrial applications
4/1/2011
Design Team 6 22
MSP430 Brush and Brushless
4/1/2011
• MSP430 connected to a DRV8801 motorcontroller.
Design Team 6 23
Summary
• Low Speed with High accuracy– Stepper motor
• Long life– AC Induction, Stepper motor, & Brushless
• High Torque– AC Induction
• No Feedback– Stepper & Brushed
• Less Power– Permanent magnet
4/1/2011
Design Team 6 24
QUESTIONS
4/1/2011