XEROX-; / ’MSDS No.: D_ 1024

Material Safety Data Sheet Date: g/7184Revision: 41 l/90 OBSOLETE

Manufacturer: Xerox Medical Systems (Xerox Corp.Emergency Tel. No. : (716) 422-2177

125 N. Vinedo Street Rochester, N.Y. Information Tel. No. : (800) 8286571Pasadena, CA 91107 14644)

Section I - Product ldentificatia

rrade Names/Synonyms: Xerox Fusing Fluid Part No. : 8R840*, 8R841*‘Cancelled Part Number

Chemical Name: I,l,l Trichloroethane(Methyl chloroform)

lnqredients

1 ,l ,l - Trichloroethane (>95Oh)l

CAS No.

71-55-6

Inhibitors:1,4- Dioxane (Diethylene ether) (<2O!G)lJButylene oxide (< 1%)Nitromethane (< 1%)

123-91-l

‘;5?5?;

Section II - Emergency and First Aid

9;;: Flush thoroughly with water.. Wash skin thoroughly with soap and water. Remove contaminated clothin

nhalation: Remove from exposure. Observe for any difficulty in breathing.ngestion: Dilute stomach contents with several glasses of water.

Do not induce vomitinq.Vimary Route of Entry: inhalationiymptoms of Overexposure: ingestion poses maximal risk of severe respiratory distress by aspiration, as

well as central nervous system depression. Intentional inhalation may resulin abnormal heart rhythms, respiratory arrest, central nervous system toxici

Medical Conditions GenerallyAggravated by Exposure: None when used as described by product literature.Additional Information: Call physician. See Section VIII. Further information on file in Poisindex.

Section Ill -Toxicology and Health InformationThis material has been evaluated by Xerox Corporation.

Oral LDH): Practically non-toxicDermal LD50: Practically non-toxicinhalation LQ,: Practically non-toxicEye Irritation: Not an irritant.Skin Sensitization: Non-sensitizingSkin Irritation: Mildly irritatingHuman Patch: Non-irritating, non-sensitizingMutagenicity: No mutagenicity detected in Ames Assay.Carcinogens: See footnote below.2Aquatic L&,: Non-toxic

TLV:

PEL:

XEV:

350 ppm (Trichloroethane)25 ppm (Dioxane)100 ppm (Nitromethane)350 ppm (Trichloroethane)25 ppm (Dioxane)100 ppm (Nitromethane)100 ppm (Trichloroethane)

Additional Information: The information below is data for l,l,l-Trichloroethane.

‘This product contains a toxic chemical(s) subjectto the reporting requirements of Section 313 of Title Ill of the Superfund Amendmentsand Reauthorization Act of 1986 and 40CFR Part 372. ZThis product contains lessthan 2% 1,4 - Dioxane which is classified as an animalcarcinogen and a potential human carcinogen by IARCand NTP. SXEL-Xerox Exposure Limit

:oml SW39 (mm) STAR N.A. - Not Applicable N.E. - None Established N.D. -Not Determined 6OOE29790

Trade Name : Xerox Fusing Fluid MSDS No. : D-l 024_ Y_ _--=*9--. I

Section IV - Physical DataAppearance/Odor: Clear liquid / Ether-like odorBoiling Point: 74°C (165°F)Solubility in Water: NegligibleEvaporation Rate: 0.35(ether = 1)VaporDensity (Air- +fr--s ;$54*V*tije L ig4.g fwfgg? 2.00% (Vol.)

Softening Range: N.A.Melting Point: - 45°CSpecific Gravity (Hz0 = 1): 1.31 @ 25°CVapor Pressure (mm Hg): 104.4@25”C<lOPH= 6.0 - 7.5

-- __ - ..j. .Section V - Fire and Explosion Data

Flash Point (Method Used):

Extinguishing Media:

34°C (93°F) ,T.C.C. Flammable LEL: 7%Limits UEL: 15%

Water, dry chemical,foam, carbondioxide.

Special Fire Fighting Procedures: Wear self-contained breathing apparatus.

Fire and Explosion Hazards: Decomposition can produce hydrogen chloride or possibly traces ofphosgene.

Stability:

Section VI - Reactivity DataHazardousPolymerization:

Hazardous Decomposition Products: Hydrogen chloride and possibly traces of phosgene.

lncompatability (Materials to Avoid): Avoid contamination with caustic soda, potash, or oxidizers. Avoidprolonged contact with aluminum. May generate toxic gases onprolonged contact with aluminum.

Section VII - Special Protection InformationRespiratory Protection: None when used as intended in Xerox products.Eye Protection: Wear safety glasses with side shields.Protective Gloves: Wear polyethylene, neoprene or polyvinyl alcohol gloves.Other: None when used as intended in Xerox products.

Section VIII - Special PrecautionsHandling and Storage:

Conditions to Avoid:

Keep away from heat, open flames, and sparks. Do not get into eyes, on skin, orclothing. Avoid breathing vapors. Store in a cool, dry place.

Material will decompose under ultra-violet light. Avoid prolonged contact withaluminum.

Section IX - Spill, Leak, and Disposal ProceduresFor Spills or Leakage: For small spills, wipe or soak up immediately while wearing gloves. Do not flush

to sewers or waterways.

Waste Disposal Method: Send solvent to a licensed waste disposal company or reclaim facility incompliance with local, state, and federal regulations.

Section X -Transportation Information

DOTProper Shipping Name:Hazard Classification:

Flammable Liquid, n.o.s.Flammable Liquid ID Number: UN1993

6OOE29790