MSC Software Confidential 1

MSC Training Course

Comprehensive Adams

Adams View and Car

2 + 2 days Training

Copyright © 2014 MSC Software Corporation. All rights reserved.

All brand names and logos are trademarks of or copyrighted by their respective owners.

Statement of Confidentiality: The information contained in this document is confidential and proprietary to MSC Software Corporation. MSC Software submits this with the express understanding that it will be held in strict confidence, will not be disclosed to any third party for any purpose, and will not be duplicated or used, in whole or in part, for any purpose other than for the evaluation of the approach, without written consent of MSC Software. The subject of this document and matters described herein, including the organizational concepts and methodology, shall not be disclosed except to employees on a need-to-know basis.

MSC Software Confidential 2

Ref. No. MSC/MTC/30052014 30 May 2014

Sub: Proposal for Comprehensive Adams Training

Dear Sir / Madam,

MSC is planning to conduct a Training Course on Comprehensive Adams, covering Adams/View and

Adams/Car for 4 days by Adams specialists at Pune, from 24th to 27th June 2014.

This training will be conducted by our Adams specialists from MSC Software. Each module will be covered by

the respective specialists, who have 8-20 years of relevant experience, and have been associated with Jaguar

Land Rover, Daimler Chrysler, Force Motors, Romax Solutions & now MSC Software. Between them, they

have been working on various projects related to Automotive, Vehicle Dynamics, Wind turbines, Engine

dynamics simulations, among others.

Enclosed is a comprehensive proposal providing details of the course along with the commercials.

All participants are required to make arrangements of the following hardware and software for the training:

Laptop Configuration Models and Processors Operating System Software

Intel or AMD x86-64,

4GB RAM

Intel Pentium 4, Pentium D, Core

2 Duo, Xeon, and compatibles Windows 7 x64

Adams 2012 or

higher

Note: In case the participant does not have a laptop, please inform MSC and we will arrange it.

Should you need any further information / clarification, please feel free to contact me.

Thanking you & looking forward to a continued long-term association.

Sincerely,

For MSC Software Corporation

Vinay Marje

vinay.marje@mscsoftware.com

+91 9881-726-108

MSC Software Confidential 3

Course Details

Adams View

Day 1

Welcome to Adams Training

Virtual Prototyping Process

Adams/View Interface Overview

Adams/Postprocessor Interface Overview

Parts and Coordinate Systems

Constraints

Joint Motion and Functions

Day 2

Point Motions and System-level Design

Measurements, Displacement Functions, and CAD Geometry

Simulations

Bushings

Forces and Splines

Step Functions and Simulation Scripts

Design of Experiments (DOE)

Subroutines

Exercise: Modeling and Analysis of an Excavator

Recommended Practices

MSC Software Confidential 4

Adams Car

Day 3

Open and Run an Assembly – General interface overview

Templates vs. Subsystems

Creating and Adjusting Subsystems

Running Suspension Analyses

Importing CAD Geometry

Running Full-Vehicle Analyses – Vehicle Setup

Creating Event Files

How to build templates

Getting Information on Communicators

Day 3

Importing Flex component in Car

Road Builder Tutorial

Requests

Using Adams/Linear with Adams/Car

General Actuation Analysis

Comparing behavior of different tires

Using Adams Smartdriver

New Features in Adams/Car 2013

Additional Training Deliverables

Interactive Discussions on Best Practices and examples from the Field, throughout the sessions

Training Certificate

Course Notes in soft copy

MSC Software Confidential 5

Commercials

Description No. of days Price per person

in INR

Training on Adams/View 2 20,000*

Training on Adams/Car 2 20,000*

*Service Tax will be charged extra at 12.36%

Important Note: Limited Seats only. The seats will be allocated on a first come-first serve basis.

To register, send an email to vinay.marje@mscsoftware.com

Terms and Conditions:

Order to be placed on:

MSC Software Corporation India Private Limited,

Ground Floor, Amar Apex Building,

Near Baner Telephone Exchange,

Baner Road, Baner,

Pune – 411 045, Maharashtra.

Proposal is valid till 15th June 2014

The training will be executed from 24th to 27th June 2014

The training location at Pune will be informed at a later stage.

If laptops are to be arranged, it needs to be intimated when placing order.

100% advance payment along with the Purchase Order by way of cheque in the name of “MSC Software

Corporation India Private Limited”