mp 104 Fmradproductsonline.com/.../10118_rv-ems-tdm_mp-104-204.pdf · 2019. 2. 18. · RADview-EMS/TDM MP-104/204 User’s Manual i Contents Chapter 1. ... MP-104/204 Signaling Dialog

RADview-EMS/TDM Element Management System for TDM Applications

MP-104/204 © 1994–2003 RAD Data Communications Publication 08/03

RADview-EMS/TDM MP-104/204 User’s Manual i

Contents

Chapter 1. Introduction 1.1 Overview..................................................................................................................... 1-1 1.2 Description.................................................................................................................. 1-1

Chapter 2. System Configuration 2.1 Configuration Operation.............................................................................................. 2-1

Viewing System Information..................................................................................................2-2 Configuring Date & Time ......................................................................................................2-3 Signaling Operations .............................................................................................................2-4 CH Cadence.........................................................................................................................2-6 TS Assignment ......................................................................................................................2-6 Polling the Agent...................................................................................................................2-9 Reset ....................................................................................................................................2-9

2.2 Fault Operations .......................................................................................................... 2-9 History Log ...........................................................................................................................2-9

2.3 Options Operations ................................................................................................... 2-11 Manager List .......................................................................................................................2-11

Chapter 3. Port in Focus 3.1 Ports Operations.......................................................................................................... 3-1

General Menu Options .........................................................................................................3-1 Object Context Menu Options..............................................................................................3-2 Port Parameters ....................................................................................................................3-4 Software Configuration .........................................................................................................3-5 TS Signaling Options .............................................................................................................3-7 Fault Operations ...................................................................................................................3-9 Diagnostics Operations .......................................................................................................3-10 Statistics Operations............................................................................................................3-12

List of Figures 1-1. MP-104 Front and Back Panel ............................................................................................... 1-2 2-1. MP-104................................................................................................................................. 2-1 2-2. MP-104/204 System Information........................................................................................... 2-2 2-3. Date & Time Dialog box........................................................................................................ 2-3 2-4. MP-104/204 Signaling Dialog Box ......................................................................................... 2-4 2-5. Cadence of the CH dialog box .............................................................................................. 2-6 2-6. TS Assignment graphic dialog box.......................................................................................... 2-7 2-7. Sequence TS Assignment ....................................................................................................... 2-8 2-8. History Log Dialog Box........................................................................................................ 2-10 2-9. Manager List........................................................................................................................ 2-11

Table of Contents

ii RADview-EMS/TDM MP-104/204 User’s Manual

3-1. Port Information Dialog box .................................................................................................. 3-4 3-2. E1 Link Port Software Configuration Dialog box..................................................................... 3-5 3-3. Channel Port Configuration Information Dialog box .............................................................. 3-6 3-4. E1 Link Port RX TS Signaling ................................................................................................... 3-8 3-5. E1 Link Port TX TS Signaling .................................................................................................. 3-9 3-6. Port Active Alarm List .......................................................................................................... 3-10 3-7. Port Tests ............................................................................................................................ 3-11 3-8. E1 Link Polling interval ........................................................................................................ 3-12 3-9. E1 Link Current Data........................................................................................................... 3-13 3-10. E1 Link interval Table ........................................................................................................ 3-14

List of Tables 2-1. System Management Options ................................................................................................ 2-1 2-2. MP-104/204 System Information Parameters......................................................................... 2-3 2-3. Date & time Parameters ........................................................................................................ 2-4 2-4. MP-104/204 Signaling Parameters ......................................................................................... 2-5 2-5. Cadence of the CH Parameters ............................................................................................. 2-6 2-6. TS Assignment Parameters ..................................................................................................... 2-7 2-7. TS Assignment Sequence Parameters..................................................................................... 2-9 2-8. History Log Parameters........................................................................................................ 2-10 2-9. Manager List Parameters...................................................................................................... 2-11 3-1. E1 Link Options..................................................................................................................... 3-1 3-2. Channel Port Options............................................................................................................ 3-2 3-3. E1 Link Object Context Options ............................................................................................ 3-3 3-4. Channel Object Context Options .......................................................................................... 3-3 3-5. Port Information Parameters .................................................................................................. 3-4 3-6. E1 Link Software Configuration Parameters ........................................................................... 3-5 3-7. Channel Port Software Configuration Parameters................................................................... 3-7 3-8. E1 Link Port RX TS Signaling Parameters ................................................................................ 3-8 3-9. E1 Link Port Tx TS Signaling Parameters ................................................................................ 3-9 3-10. Port Active Alarm List Parameters ...................................................................................... 3-10 3-11. Tests Parameters................................................................................................................ 3-11 3-12. E1 Link Polling Interval Parameters .................................................................................... 3-12 3-13. E1 Link Current Data Parameters....................................................................................... 3-13 3-14. E1 Link Interval Parameters ............................................................................................... 3-15

Description 1-1

Chapter 1 Introduction

1.1 Overview

MP-104/204 is a device that enables to multiplex 8 or 16 analog voice channels into one E1 main link.

The RADview-EMS/TDM MP-104/204 management application provides two main modes of operation - System Configuration and Port Configuration. The System Configuration is described in the System Configuration chapter, and the Port Configuration in the Port in Focus chapter.

1.2 Description

The MP-104 is shown in Figure 1-1. The front panel includes mainly the device name and LEDs. The back panel includes:

• Power outlet – connector to outside PS.

• Control ETH port – for NMS use

• Control port – for Terminal use

• LINK E1 port – the main link of the device (up-link)

• CH1 – CH8 ports – in groups of 4 ports. RJ-45 connectors of analog voice ports, with embedded LEDs.

Chapter 1 Introduction RADview-EMS/TDM MP-104/204 User’s Manual

1-2 Description

Front

Back

Figure 1-1. MP-104 Front and Back Panel

Configuration Operation 2-1

Chapter 2 System Configuration This chapter describes the MP-104/204 system level management configuration operations.

2.1 Configuration Operation

To access to the system level:

• Click on the out side frame of the device window

A light blue frame outlines the screen.

Figure 2-1. MP-104

Table 2-1. System Management Options

Tasks – Configuration Dialog Box and Parameter Location

Path

System Info... See Figure 2-2 Configuration System info…

Date & Time See Figure 2-3 Configuration Date & Time…

Signaling. See Figure 2-4 Configuration Signaling…

CH Cadence... See Figure 2-5 Configuration CH Cadence…

Chapter 2 System Configuration RADview-EMS/TDM MP-104/204 User’s Manual

2-2 Configuration Operation

Table 2-1. System Management Options (Cont.)

Tasks – Configuration Dialog Box and Parameter Location

Path

TS Assignment... See Figure 2-6 Configuration TS Assignment…

Poll Agent See Polling the Agent Configuration Poll Agent…

Reset See Reset Configuration Reset…

Tasks – Fault Dialog Box and Parameter Location

Path

Viewing History Log See Figure 2-8 Fault history Log…

Tasks – Option Dialog Box and Parameter Location

Path

Management List See Manager List Option Management List…

Viewing System Information To view system information:

• Select Configuration > System Info.

Figure 2-2. MP-104/204 System Information

RADview-EMS/TDM MP-104/204 User’s Manual Chapter 2 System Configuration


Table 2-2. MP-104/204 System Information Parameters

Parameter Possible Values / Remarks

Description: String

Object ID: radMP104

Name: String up to 12 char

Contact: String up to 32 char

Location String up to 32 char

System Up Time Format: X days HH:MM:SS

Number of Interfaces

Configuring Date & Time

Setting the Agent Date & Time

To set the Date and Time:

1. Select Configuration > Date & Time.

Figure 2-3. Date & Time Dialog box

2. Edit the date in format DD-MM-YYYY, MM-DD-YYYY or YYYY-MM-DD Or

Click on Date combo box arrow, to pull down a Month Calendar Control and select the date.

3. Type in the time.



Table 2-3. Date & time Parameters


Format DD-MM-YYYY, MM-DD-YYYY or YYYY-MM-DD

Date DD-MM-YYYY, MM-DD-YYYY or YYYY-MM-DD

Time hh:mm:ss

If entering dates like 29,30,31 for a month that does not have such days, RADview will issue the first date from the next month.

Signaling Operations Enables to define the Signaling towards the E1 Link and the FXS Channels (CH1..CH8/CH16).

To Access to the Signaling menu:

• Select Configuration > Signaling.

Figure 2-4. MP-104/204 Signaling Dialog Box

Note



Table 2-4. MP-104/204 Signaling Parameters


Tx (to E1 LINK) group

Off Hook – A Bit Off Hook – B Bit Off Hook – C Bit Off Hook – D Bit

1, 0

On Hook – A Bit On Hook – B Bit On Hook – C Bit On Hook – D Bit

1, 0

OOS State – A Bit OOS State – B Bit OOS State – C Bit OOS State – D Bit

1, 0

Rx (to FXS CHs) group

Ring – A Bit Ring – B Bit Ring – C Bit Ring – D Bit

1, 0

IdleState– A Bit IdleState – B Bit IdleState– C Bit IdleState– D Bit

1, 0

OOS State – A Bit OOS State – B Bit OOS State – C Bit OOS State – D Bit

1, 0



CH Cadence Enables to define the Cadence of the CH.

To Access to the Cadence of the CH:

• Select Configuration > Cadence of the CH.

Figure 2-5. Cadence of the CH dialog box

Table 2-5. Cadence of the CH Parameters


Couple #1On (msec) 0 .. 5000

Couple #1Off (msec) 0 .. 5000

Couple #2 On (msec ) 0 .. 5000

Couple #2 Off (msec) 0 .. 5000

Couple #3 On (msec) 0 .. 5000


Couple #4 On (msec) 0 .. 5000


TS Assignment Enables to define TS Assignment (connections), for the MP ports.

To Access to the TS Assignment menu:

• Select Configuration > TS Assignment menu.

The TS Assignment dialog box displays, in graphical mode, the existing TS connections according to data received from the agent.



Figure 2-6. TS Assignment graphic dialog box

Table 2-6. TS Assignment Parameters


Mng TS None 1..31 for prtExPh1MlLineType= g732nE1(4) , g732nE1CRC(5) 1..15, 17..31 for prtExPh1MlLineType= g732sE1 (6), g732sE1CRC (7)

Conectable TS All, Part, None

E1 Link For prtExPh1MlLineType= g732nE1(4) , g732nE1CRC(5), the connectable TSs are 1..31

For prtExPh1MlLineType= g732sE1 (6), g732sE1CRC (7), the connectable TSs are 1..15, 17..31 (TS 16 cannot be connected)

CH For prtExPh1MlLineType= g732sE1 (6), g732sE1CRC (7) The connectable TSs are 1..31, except TS 16

Foe agnTsType=mng AND/OR the value of agnIdx (respectively)

Color Codes

Color of TS (1.. 31)

All TS Types refer to E1 LINK. Green - TS Type=Voice and TS is connectable. Gray - TS is not connected though TS is connectable. Blue - TS is not connected because TS is not connectable. White - TS Type=Mng and TS is connectable

Color of inside cells Gray - cells that are not connected (empty) but can be connected. Yellow - cells that are connected, except TS Type=Mng (containing a 'V' letter) and are connectable. Blue - non connectable cells that are not connected (empty)

Color of Port names Refer to E1 LINK, CH:

Gray - no one of the connectable TSs of the port is connected Yellow - part of the connectable TSs of the port are connected and all of them are valid (applicable for E1 LINK port only). Green - all connectable TSs of the port are connected and all of them are valid (this color is relevant only for the CHs, because E1 LINK will never be full in the MP-104/204 devices)



Table 2-6. TS Assignment Parameters (Cont.)


[Set] Setts the Agent the displayed TSA (as in Dynamic DB), so that Agent's TSA will be the same as the one displayed

[Cancel]

[Sequence] See below

[Voice] Is enabled only when an empty Gray cell is selected. Pressing the button will cause the following:

• The existing connection of this TS will be canceled (if exists for the same column)

• The new connection will be created, with the Voice TS Type

The new state will be displayed (selected cell YELLOW, with a V letter matching the TS Type in it and the deleted one Gray, empty). The Row title cells' color will be updated according to the new state.

[Disconnect] The display will be updated to show a GRAY empty cell, for the deleted cell (for disconnecting the Yellow cell).

The respective Row title color will be updated accordingly.

[Reset All] See below

As soon as the user changes the above Mng TS selection (numerical value), the former CH connection to this TS will be deleted (if it existed) and the new one (Mng TS) will be displayed (Mng TS will overwrite the CH connection). The graphic display will be updated accordingly.

Sequence TS Assignment

To Access to the Sequence TS Assignment:

• In the TS Assignment graphic dialog box (see Figure 2-6) click on < Sequence>.

Figure 2-7. Sequence TS Assignment

Note


Fault Operations 2-9

Table 2-7. TS Assignment Sequence Parameters


MP-104 (CH1..CH8)

A None

B 24..31

C 1..23

D None, 1..31

MP-204 (CH1..CH16)

E None

F 16..31

G 1..15

H None, 1..31

[OK]

[Cancel]

Polling the Agent To Poll the agent:

• From the Configuration menu select Poll Agent.

Reset To reset:

1. Select Configuration > Reset The message "Resetting Agent" appears.

2. Click <OK> to confirm.

2.2 Fault Operations

History Log Displays the content of the alarm buffer of the agent.

Viewing the History Log

To access the History Log:

• Select Fault > History Log


2-10 Fault Operations

Figure 2-8. History Log Dialog Box

Table 2-8. History Log Parameters


Code

Port

Description Brief description of the alarm

Status Status of alarm

Date

Time

[Close]

[Save File]

[Print] Opens a standard Print Dbox for printing the list

[Refresh] Refresh the list.

The Dialog box displays the entries in the order as received from the agent by GetNext. Agent brings the entries in a chronologic order (most recent entries are last). The list may be sorted differently by clicking any of the column titles.

Note


Options Operations 2-11

2.3 Options Operations

Manager List The Manager List command enables you to establish the actual link between the selected MP-104/204 device and the manager.

Displaying Manager List

To display the manager list:

• Select Options > Manager List...

Figure 2-9. Manager List

Table 2-9. Manager List Parameters


Manager ID 1–10

IP Address IP address of the Network Management System

Adding/Changing the Manager List

To add/change an entry in the manager list:

1. In the Manager List, highlight the field you want to add/change.

2. Enter the IP Address.

3. Click <Set> to implement the changes.


2-12 Options Operations

Ports Operations 3-1

Chapter 3 Port in Focus

3.1 Ports Operations

There are two types of menus for a port, depending on the method of invocation:

• When a port is selected and one of the menu entries is selected, the general menu is displayed.

• When the mouse is placed on the desired port and you click the right button, the Object Context menu is displayed.

General Menu Options To access to the General Menu:

1. Select the Link Port or the Channel Port. A light blue frame outlines the selected port.

2. Select one of the menus entries.

Table 3-1 and Table 3-2 describe the general menu options for the E1 Port and Channel Port respectively.

Table 3-1. E1 Link Options

Tasks – Configuration

Dialog Box and Parameter Location Path

Viewing Information See (Figure 3-1) Configuration Port Parameters… Information…

Software configuration See(Figure 3-2) Configuration Port Parameters… Software Configuration

Displaying RX TS Signaling

See (Figure 3-4) Configuration Signaling RX…

Displaying TX TS Signaling

See (Figure 3-5) Configuration Signaling TX…

Chapter 3 Port in Focus RADview-EMS/TDM MP-104/204 User’s Manual

3-2 Ports Operations

Table 3-1. E1 Link Options (Cont.)

Tasks – Fault Dialog Box and Parameter Location Path

Viewing Alarms See (Figure 3-6) Fault Alarms List

Tasks – Diagnostics Dialog Box and Parameter Location Path

Testing See (Figure 3-7) Diagnostics Test

Tasks – Statistics Dialog Box and Parameter Location Path

Polling Agent See (Figure 3-8) Statistics Polling Agentl

Viewing Current Data See (Current Data) Statistics Current Data

Viewing Interval Data See (Figure 3-10) Statistics Intervals Data

Table 3-2. Channel Port Options

Tasks – Configuration

Dialog Box and Parameter Location Path

Viewing Port Information

See (Figure 3-1) Configuration Port Parameters… Information…

Configuring Port Software

See Configuring Channel Port software Configuration Port Parameters… Software Configuration

Tasks – Diagnostics Dialog Box and Parameter Location Path

Testing See (Figure 3-7) Diagnostics Test

Object Context Menu Options To access to the General Menu:

1. Select the Link Port or the Channel Port. A light blue frame outlines the selected port.

2. Click the right button. A specific menu is displayed.

Table 3-3 and Table 3-4 describe the Object Context menu options for the E1 Port and Channel Port respectively.

RADview-EMS/TDM MP-104/204 User’s Manual Chapter 3 Port in Focus


Table 3-3. E1 Link Object Context Options

Tasks Dialog Box and Parameter Location Path

Viewing Port information

See Viewing Port Information Context Menu Port Parameters… Information…


See Software Configuration Context Menu Port Parameters… Software Configuration

Viewing Active Alarms list

See Figure 3-6 Context Menu Alarms List

Clearing Alarms See Viewing Active Alarms List Context Menu Alarms Clear

Runing Port tests See Testing Context Menu Test

Polling Interval See Polling Intervals Context Menu Polling Interval

Viewing Current Data See Current Data Context Menu Current Data

Viewing IntervalData See Interval Data Context Menu IntervalData

Table 3-4. Channel Object Context Options

Tasks Dialog Box and Parameter Location Path

Viewing Port information

See Viewing Port Information Context Menu Port Parameters… Information…


See Configuring Channel Port software Context Menu Port Parameters… Software Configuration

Runing Port Tests See Testing Context Menu Test



Port Parameters

Viewing Port Information

To Access to the Information menu:

• From the Configuration menu in the E1 Link mode select Port Parameters followed by information.

Or

• From the Configuration menu in the Channel mode select Port Parameter.

Or

• From Context Menu for E1 Port select Port Parameters > Information

Or

• From Context Menu for Channel Port select Port Parameters > Information

Figure 3-1. Port Information Dialog box

Table 3-5. Port Information Parameters


Port (title) E1 LINK, CH1..CH8 (or CH16 for MP-204)

Port Type E1, FXS

Active Status Not Used, Offline, Online

Test Status If MIB object's value = none, the value displayed will be : Not Active else, the value displayed will be: Active

Alarm Status Off, Event, Major, Minor

Interface Desc



Software Configuration

Configuring E1 Link software

To Access to the Software Configuration menu:

• From the Configuration in the E1 link mode menu select Port Parameters > Software Configuration.

Or

• From the Object Context menu in the Channel mode select Port Parameter > Software Configuration.

Figure 3-2. E1 Link Port Software Configuration Dialog box

Table 3-6. E1 Link Software Configuration Parameters



Port Type E1, FXS

Connect No, Yes

Line Type E1-MF (G.732S) E1 (G.732N) , E1-CRC (G.732NCRC), E1-CRC-MF (G.732SCRC)

Restore Time (sec) CCITT, 1, 10

Idle Code (hex) 0..FF

Line Code AMI, HDB3

Clock Source LBT, Internal



Table 3-6. E1 Link Software Configuration Parameters (Cont.)


Interface LTU, DSU

Line Impedance Balanced, Unbalanced

Connect – can be Yes even if no TS of the port is connected. It cannot be No if at least one TS is selected (it must be Yes in this case)

Configuring Channel Port software

To Access to the Software Configuration menu:

• From the Configuration in the Channel mode menu select Port Parameters > Software Configuration.

Or

• From Context Menu for Channel Port select Port Parameters > Software Configuration

Figure 3-3. Channel Port Configuration Information Dialog box

Note



Table 3-7. Channel Port Software Configuration Parameters



Connect No, Yes

Tx Level (dBm) 5.0, 4.5, 4.0, 3.5, -9.5, -10.0

Rx Level (dBm) 5.0, 4.5, 4.0, 3.5, -9.5, -10.0

Coding Law ALaw, ULaw

Meter Rate (KHz) Disabled, 12, 16

Echo Canceler On, Off

Reverse Polarity Disabled, Enabled

Ringer Frequency (Hz) 20, 25, 50

Caller Id Disabled, Enabled

Connect – will be received from Agent, RO. Agent will set its value according to TSA: • If the CH is connected in TSA: Connect=Yes • If the CH is not connected in TSA: Connect=No.

TS Signaling Options This is applicable for the E1 Link Port only.

Viewing Port RX TS Signaling

To view Port RX TS Signaling:

• Select Configuration in the E1 link mode menu > TS Signaling > RX.

Note



Figure 3-4. E1 Link Port RX TS Signaling

Table 3-8. E1 Link Port RX TS Signaling Parameters


Port (title) E1 LINK

Port Type E1

TS 1..31

A Bit 1, 0

B Bit 1, 0

C Bit 1, 0

D Bit 1, 0

Viewing Port TX TS Signaling

To view Port TX TS Signaling:

• Select Configuration in the E1 link mode > TS Signaling > Tx.



Figure 3-5. E1 Link Port TX TS Signaling

Table 3-9. E1 Link Port Tx TS Signaling Parameters



Port Type E1

TS 1..31

A Bit 1, 0

B Bit 1, 0

C Bit 1, 0

D Bit 1, 0



Fault Operations This is applicable for the E1 Link Port only.

Viewing Active Alarms List

To view active alarms list:

• Select Fault in the E1 Link mode > Alarms > List.

Figure 3-6. Port Active Alarm List

Table 3-10. Port Active Alarm List Parameters



Type

Code

Description

Severity

State



Diagnostics Operations This is applicable for both the E1 link Port and Channel Port.

Testing

To perform tests:

• Select Diagnostics menu in the E1 Link mode or the Channel mode >Test.

Figure 3-7. Port Tests

Table 3-11. Tests Parameters



Port Type E1, FXS

Current Test The displayed values will be the following (instead of the MIB values):

None, Local Loop, Remote Loop Tone Injection, Backward Tone Inject

Current Time Left (min) If value=0, infinite will be displayed.

This field is enabled only for E1 Link when the Current Test is Remote Loop

New Test combo-box

None, Local Loop, Remote Loop Tone Injection, Backward Tone Inject

New Duration (min) 1 ..2..30

Note This field is enabled only for E1 Link and only when the New Test is Remote Loop.

[Start Test] This button will be disabled, if no test is running on the port and prtSTestMask=0 (no test is possible on this port)



Table 3-12. Tests Parameters (cont.)


[Stop Test] This button will be enabled only when a test is running on the specific port.

[Refersh] This button will be disabled since pressing it, until the refreshed data is received from the agent and the display is updated accordingly. It will also be disabled when NMS is busy refreshing the Dbox due to the [Start Test] or [Stop Test] buttons being pressed

Statistics Operations This is applicable for the E1 Link only.

Polling Intervals

To Poll Intervals:

• Select Statistics menu in the E1 Link mode > Polling Interval.

Or

• Select Object Context Menu for the E1 Link > Polling Interval.

Figure 3-8. E1 Link Polling interval

Table 3-13. E1 Link Polling Interval Parameters



Port Type E1

Time Elapsed (sec) 0 ..899

Errored Seconds (ES) A second containing one or mode of the following events: - CRC error event, SEF (OOF) event, AIS - OF defect is the occurrence of framing bits error

If SES is also effective at the same time, ES will run for 10 seconds and stop

Severe Errored Seconds (SES) Indicates that the severely errored seconds threshold has been reached/exceeded for the SHDSL Segment Endpoint

Unavailable Seconds (UAS) Number of seconds that the interface is unavailable

Controlled Slip Seconds (CSS)

Bursty Errored Seconds (BES)

Degraded Minutes (DM)



Current Data

To display the Interval Data: • Select Statistics menu in the E1 Link mode > Current Data.

Or • Select Object Context Menu for the E1 Link > Current Data.

Figure 3-9. E1 Link Current Data

Table 3-14. E1 Link Current Data Parameters


Port (title) E1 Link

Port Type E1










If no data is received from the agent for the graph (request rejected by agent - can occur only due to an agent 'bug'), the graph will be empty and a message will be displayed: "Request rejected by agent.\n No current data." with an [OK] button.

Interval Data

To display the Interval Data:

• Select Statistics menu in the E1 Link mode > Interval Graph.

Or

• Select Object Context Menu for the E1 Link > Interval Graph.

Figure 3-10. E1 Link interval Table

Note



Table 3-15. E1 Link Interval Parameters



Port Type E1

No. of Intervals 0..96

Inv No. Total, 1 ..No. of Intervals (Total will be displayed in the first row and after that the intervals)

From (hh:mm:ss) For Total: A= Current time (NMS time)- rfc2495.dsx1TimeElapsed A - ( N 15 min) For 1: A - 15 min. For 2: A - 30 min. For N= 'No. of Intervals':

To (hh:mm:ss) For Total: A= Current time (NMS time)- rfc2495.dsx1TimeElapsed For 1: A= Current time (NMS time)- rfc2495.dsx1TimeElapsed For 2: A - 15 min. For N= 'No. of Intervals': A - [( N-1) ∗ 15 min]










I-1

Index

—A— A Bit

E1 Link Port RX TS Signaling, 3-8 E1 Link Port Tx TS Signaling, 3-9

Access General Menu, 3-1

Active Status Port Information, 3-4

Alarm Status Port Information, 3-4

—B— B Bit


Bursty Errored Seconds E1 Link Current Data, 3-12 E1 Link Interval, 3-14 E1 Link Polling Interval, 3-11

—C— C Bit


Cadence Access to, 2-5

Caller Id Channel Port Software Configuration, 3-7

CH TS Assignment, 2-7

CH Cadence System Management Options, 2-1

Clearing Alarms E1 Link Object Context, 3-3

Clock Source E1 Link Software Configuration, 3-5

Code Port Active Alarm List, 3-9 TS Assignment, 2-10

Coding Law Channel Port Software Configuration, 3-7

Color Codes TS Assignment, 2-7

Color of TS (1.. 31) TS Assignment, 2-7

Color of inside cells TS Assignment, 2-7

Color of Port names

TS Assignment, 2-7 Configuration

Operation, 2-1 Configuring Port Software

Channel Object Context, 3-3 Channel Port Options, 3-2 E1 Link Object Context, 3-3

Connect Channel Port Software Configuration, 3-6 E1 Link Software Configuration, 3-5

Contact System Information, 2-2

Controlled Slip Seconds E1 Link Current Data, 3-12 E1 Link Interval, 3-14 E1 Link Polling Interval, 3-11

Couple #1 Off Cadence of the CH, 2-6 #1 On Cadence of the CH, 2-5 #2 Off Cadence of the CH, 2-5 #2 On Cadence of the CH, 2-5 #3 Off Cadence of the CH, 2-6 #3 On Cadence of the CH, 2-6 #4 Off Cadence of the CH, 2-6 #4 On Cadence of the CH, 2-6

Current Data E1 Link Option, 3-2

Current Test Test, 3-10

Current Time Test, 3-10

—D— D Bit


Date Date & time, 2-3 TS Assignment, 2-10

Date & Time System Management Options, 2-1

Degraded Minutes, 3-14 E1 Link Current Data, 3-12 E1 Link Polling Interval, 3-11

Index RADview-EMS/TDM MP-104/204 User’s Manual

I-2

Description Port Active Alarm List, 3-9 System Information, 2-2 TS Assignment, 2-10

Diagnostics Testing, 3-10

Displaying RX TS Signaling E1 Link Option, 3-1

Displaying TX TS Signaling E1 Link Option, 3-1

—E— E1 Link

TS Assignment, 2-6 Echo Canceler

Channel Port Software Configuration, 3-7 Errored Seconds

E1 Link Current Data, 3-12 E1 Link Interval, 3-14 E1 Link Polling Interval, 3-11

—F— Fault Operations

Viewing Active Alarms, 3-9 Viewing History Log, 2-9

Format Date & time, 2-3

From E1 Link Interval, 3-14

—H— History Log

Access to, 2-9

—I— Idle Code

E1 Link Software Configuration, 3-5 Interface

E1 Link Software Configuration, 3-6 Interface Description

Port Information, 3-4 Interval Data

E1 Link Option, 3-2 Inv No

E1 Link Interval, 3-14 IP Address

Manager list, 2-11

—L— Line Code

E1 Link Software Configuration, 3-5 Line Impedance

E1 Link Software Configuration, 3-6 Line Type

E1 Link Software Configuration, 3-5 Location

System Information, 2-3

—M— Management List

System Management Options, 2-2 Manager ID Manager List, 2-11 Manager List

add/change, 2-11 Display, 2-10

Meter Rate Channel Port Software Configuration, 3-7

Mng TS TS Assignment, 2-6

—N— Name

System Information, 2-2 New Duration

test, 3-10 New Test

test, 3-10 No. of Intervals

E1 Link Interval, 3-14 Number of Interfaces

System Information, 2-3

—O— Object Context

Options, 3-2 Object ID

System Information, 2-2 Overview, 1-1

—P— Poll Agent

System Management Options, 2-2 Polling

Agent, 2-2, 2-9 Polling Interval

Ei Link Object Contex, 3-3 Port

Channel Port Software Configuration, 3-6 E1 Link Current Data, 3-12 E1 Link Interval, 3-14 E1 Link Polling Interval, 3-11 E1 Link Port RX TS Signaling, 3-8 E1 Link Port Tx TS Signaling, 3-8 E1 Link Software Configuration, 3-5 Port Active Alarm List, 3-9 Port Information, 3-4 Tests, 3-10 TS Assignment, 2-10

Port Type E1 Link Current Data, 3-12 E1 Link Interval, 3-14 E1 Link Polling Interval, 3-11 E1 Link Port RX TS Signaling, 3-8 E1 Link Port Tx TS Signaling, 3-8 Test, 3-10

RADview-EMS/TDM MP-104/204 User’s Manual Index

I-3

—R— Reset

System Management Options, 2-2 Restore Time

E1 Link Software Configuration, 3-5 Reverse Polarity

Channel Port Software Configuration, 3-7 Ringer Frequency

Channel Port Software Configuration, 3-7 Runing Port tests

Channel Object Context, 3-3 E1 Link Object Context, 3-3

Rx Level Channel Port Software Configuration, 3-6

—S— Setting

Date & Time, 2-3 Setting DXC timing information

System Management, 2-1 Severe Errored Seconds


Severity Port Active Alarm List, 3-9

Signaling Operations, 2-4 System Management Options, 2-1

Signaling Rx IdleState

A Bit, 2-5 B Bit, 2-5 C Bit, 2-5 D Bit, 2-5

Rx OOS State A Bit, 2-5 B Bit, 2-5 C Bit, 2-5 D Bit, 2-5

Rx Ring A Bit, 2-5 B Bit, 2-5 C Bit, 2-5 D Bit, 2-5

Tx Off Hook A Bit, 2-4 B Bit, 2-4 C Bit, 2-4 D Bit, 2-4

Tx On Hook A Bit, 2-4 B Bit, 2-4 C Bit, 2-4 D Bit, 2-4

Tx OOS State A Bit, 2-5 B Bit, 2-5 C Bit, 2-5 D Bit, 2-5

Software configuration E1 Link Option, 3-1

Software Configuration Channel Port, 3-6 E1 Link, 3-5

State Port Active Alarm List, 3-9

Statistics Operations Current Data, 3-12 Interval Data, 3-13 Polling Intervals, 3-11

Status TS Assignment, 2-10

System Info System Management Options, 2-1

System Up Time System Information, 2-3

—T— Test Status

Port Information, 3-4 Testing

Channel Port Options, 3-2 E1 Link Option, 3-2

Time Date & time, 2-3 TS Assignment, 2-10

Time Elapsed E1 Link Polling Interval, 3-11

To E1 Link Interval, 3-14

TS E1 Link Port RX TS Signaling, 3-8 E1 Link Port Tx TS Signaling, 3-8

TS Assignment Access to, 2-6 Conectable TS, 2-6 Sequence, 2-8 Sequence MP-104 (CH1..CH8), 2-8 Sequence MP-204 (CH1..CH16)

E, 2-8 F, 2-8 G, 2-8 H, 2-8

System Management Options, 2-2 TS Signaling

Viewing Port RX, 3-7 Viewing Port TX, 3-8

Tx Level Channel Port Software Configuration, 3-6

Index RADview-EMS/TDM MP-104/204 User’s Manual

I-4

Type E1 Link Software Configuration, 3-5 Port Active Alarm List, 3-9 Port Information, 3-4

—U— Unavailable Seconds


—V— Viewing

System Information, 2-2 Viewing Active Alarms list

E1 Link Object Context, 3-3

Viewing Alarms E1 Link Option, 3-1

Viewing Current Data Ei Link Object Contex, 3-3

Viewing History Log System Management Options, 2-2

Viewing Information E1 Link Option, 3-1

Viewing Interva Data Ei Link Object Contex l, 3-3

Viewing Port information Channel Object Context, 3-3 E1 Link Object Context, 3-3

Viewing Port Information Channel Port Options, 3-2

Documents

mp 104 Fmradproductsonline.com/.../10118_rv-ems-tdm_mp-104-204.pdf · 2019. 2. 18. · RADview-EMS/TDM MP-104/204 User’s Manual i Contents Chapter 1. ... MP-104/204 Signaling Dialog