Moving pilots, motorists and pedestrians in the right direction…

safely.

Airfield Pavement MarkingsP R E F O R M E D T H E R M O P L A S T I C

2

Application of Surface Painted Hold Position Sign:

A cumbersome process with paint or epoxy due to masking multi-colors

3

A durable preformed thermoplastic pavement marking material that is specially formulated for airfield applications.

I N T R O D U C I N G…

Preformed Thermoplastic

AC 150/5370-10E Item P-620 Specification for Runway and Taxiway Painting

4

AirMark® is supplied in rolls for easier and faster layout

5

MARKINGS – BEST PRACTICES

■ Safety - reduce runway incursions and vehicle pedestrian deviations

- reduce frequency of remarking time and labor intensive multi-colored surface signage

■ Uniformity - quick recognition of familiar markings - establish standard multi-colored marking procedures

■ Durability - lasts at least 8 to 12 times longer than paint - enhance life cycle cost benefit

■ Quality - built into the marking at time of manufacturing for consistent control - UV resistant; colorfast pigments meet FAA expectations - retroreflective glass beads intermixed throughout the material - clean, crisp appearance

► Packaged conveniently in rolls for efficient application

► Retroreflective glass beads throughout material

► 65-mil thickness for uniform application

► Resistant to aviation fuels, motor fuels,

lubricants, deicers

► Can be applied to asphalt and/or portland cement

concrete (including Green concrete).

► Opened to traffic maximum 15 minutes after application

► White, yellow, red pigments meet DOT/FAA/AR-TN 03/22

► Applied with large infrared heater by Certified

Applicators

Preformed Thermoplastic Pavement Markings

For Airfield Applications

7

Preformed Thermoplastic Pavement Markings

Installation with Large Infrared Heater

Prepare Surface Position Material Heat Material

Preformed Thermoplastic Pavement Markings

Installation with Large Heater

Preformed Thermoplastic Pavement Markings

Advantages and value pronounced in multi-color markings

Geographic Position

Runway Holding Position

ILS Holding Position

Surface Holding Position

Location

Enhanced Taxiway Centerline

Taxiway Centerline

Non-Movement Area Boundary Direction

SIDA

Chris Brooks

Vice President – Specialized Markets

Office: (336) 475-6600

Cell: (336) 337-7526

cbrooks@flinttrading.com

Flint Trading, Inc.

115 Todd Court

Thomasville, NC 27263

(336) 475-6600

www.flinttrading.com

For More Information