Motive Group HPLV Samson Conveyor Belt Cleaner

Motive Group HPLV “Samson” Conveyor Belt Cleaners

approach to the continual problem of effectively cleaning conveyor belt

and removing carry back without damage or wear. Instead of using

blades, brushes and scrapers to remove product off the belt our unit uses

High Pressure Low Volume water jet nozzles to clean the return run of the

belt. By keeping the amount of water used very low and directing the

cleaning discharge back into the product flow, the system operates

without any product spillage or build-up with the advantage of a small

amount of water introduced into the product stream acting as a dust

suppressant.

HPLV Advantages:

• Simple Installation and Operation.

• Eliminates Carry Back, Belt Wear and Damage therefor

increasing belt life.

• No Replacement or Adjustment of Scraper Blades or Brushes

which leads to reduced down time and maintenance costs.

• No under belt spillage and expensive cleanup cost

• Assists in Dust Suppression.

• Possible Multiple Spray Bar Installation available from the one

unit.

• Plug and Play to Site PLC.

Proven Ability and World Class Design:

The new HPLV “Samson” units were designed jointly between Motive

Traction and a Major Iron Ore Company Prod

during 2012/13. After installation of a trial Standard HPLV

month period in 2011/12 and following several design and operational

improvements in 2012, the “Samson” HPLV

belt cleaning, process management and dust

area, bringing us into a new era of conveyor belt cleaning with the

introduction of the HPLV “Samson” Conveyor Belt Cleaner

Motive Traction has not previously offered other clients the HPLV Samson

Conveyor Belt Cleaner and we are pleased to now offer this outstanding

product to the general marketplace.

The New Approch – Proven Ability

Conveyor Belt Cleaning at its best.

Contact Us Today!

Motive Group HPLV Samson Conveyor Belt Cleaner

Belt Cleaners are the new

approach to the continual problem of effectively cleaning conveyor belt

ithout damage or wear. Instead of using

blades, brushes and scrapers to remove product off the belt our unit uses

High Pressure Low Volume water jet nozzles to clean the return run of the

belt. By keeping the amount of water used very low and directing the

cleaning discharge back into the product flow, the system operates

up with the advantage of a small

amount of water introduced into the product stream acting as a dust

n and Operation.

Eliminates Carry Back, Belt Wear and Damage therefore

No Replacement or Adjustment of Scraper Blades or Brushes

which leads to reduced down time and maintenance costs.

No under belt spillage and expensive cleanup costs.

Multiple Spray Bar Installation available from the one

re designed jointly between Motive

Product Development Team

Standard HPLV unit during a 12

2 and following several design and operational

e “Samson” HPLV unit now provides effective

dust minimization in its working

new era of conveyor belt cleaning with the market

Conveyor Belt Cleaner in early 2013.

Motive Traction has not previously offered other clients the HPLV Samson

nveyor Belt Cleaner and we are pleased to now offer this outstanding

Proven Ability – World Class Design

Conveyor Belt Cleaning at its best.

Contact Us Today!

HPLV Internal Piping

System

Duel Filtering System

World Recognized Parts

High Performance Water

Saving Spray Bar

Motive Traction Pty Ltd

2738 Booral Road,

2425 Australia

Mail: PO Box 19 Stroud

2425 Australia

Phone: + 61 2 4994 9999

Contact: Chris Taylor

Mobile/Cell

+ 61 427 949 152

Office

+61 2 4994 9999

Email: chris@motive

traction.com.au

HPLV Internal Piping

System

Duel Filtering System

World Recognized Parts

High Performance Water

Saving Spray Bar

Motive Traction Pty Ltd

2738 Booral Road, Booral NSW

Australia

Mail: PO Box 19 Stroud NSW

Australia

4994 9999

Chris Taylor

/Cell:

27 949 152

Office:

2 4994 9999

@motive-

traction.com.au