MotionX GPS Drive Manual

US and Foreign Patents Granted and Pending. Fullpower®, MotionX®, TapTap®, and ShakeShake® are registered trademarks of Fullpower Technologies, Inc. Touch-N-Set™, Tilt ‘n Roll™, and TiltTilt™ are trademarks of Fullpower Technologies, Inc. All other trademarks remain the property of their respective owners. © Copyright 2003-2011 Fullpower Technologies, Inc. All rights reserved. 1

User ManualRevision 12.1November 2011Fullpower Technologies, Inc., makers of MotionX®

Table of Contents

1. MotionX-ID 3

2. Overview 5

3. Menu 6

4. Search 7

5. Go To 11

6. Navigation 13

7. Maps 22

8. Directions List 27

9. Compass 28

10. Position 30

11. Settings 32

12. In-Car Displays 35

13. Accessories 37

13. Terms and Conditions 38

Getting Started

•Video: http://drive.motionx.com/video/•Tutorials: http://drive.motionx.com/iphone/tutorials/•Quick Start Guide: http://drive.motionx.com/quick-start/


http://drive.motionx.com/video/

http://drive.motionx.com/video/

http://drive.motionx.com/tips/

http://drive.motionx.com/tips/

http://drive.motionx.com/quick-start/

http://drive.motionx.com/quick-start/

1. MotionX-IDMotionX-GPS Drive users may optionally create a MotionX-ID, including a username and password, to protect your Live Voice Guidance purchases and to access your purchases on multiple devices such as an iPhone and an iPad.

Benefits of the MotionX-ID:

• Creating a MotionX-ID protects your guidance package purchases in case you lose your device or purchase a new iPhone.

• If you have multiple devices such as an iPhone and an iPad, or more than one iPhone in your household, use your MotionX-ID to access Live Voice Guidance purchases on multiple devices.

• Your username and password will remain completely confidential and will not be used for any other purpose. After an initial confirmation email, you will not receive any unsolicited communications from MotionX.

• For additional information, please visit the MotionX-ID FAQ page on the MotionX-GPS Drive website.


Your MotionX-ID username is your email address.

Create and confirm a password.

You will not be required to log in again unless you manually log out, or if you are using a different device.

You must agree to Fullpower’s privacy policy and EULA to continue.

Opt-in to MotionX news via email, only if you choose.

http://drive.motionx.com/iphone/faq/3/

http://drive.motionx.com/iphone/faq/3/

1. MotionX-ID (continued)

View and manage your MotionX-ID. Select Settings from the main menu, then select MotionX-ID. Options from the MotionX-ID management screen include:

• Change ID• Change Password• Sign Out• Manage Devices (shown below)

The MotionX-ID is optional, but without it you cannot access your live voice guidance purchases on multiple devices, and they will not be recovered if you lose your phone or upgrade to a new device. Go to Settings > MotionX-ID at any time to create a MotionX- ID; any in-app purchases will be automatically applied.


Other device(s) on which your MotionX-ID was used to log into MotionX-GPS Drive.

The device(s) shown here share the same Live Voice Guidance purchases.

Select Remove to un-associate a specific device from your MotionX-ID.

Displays the username for the MotionX-ID you are currently using.

2. OverviewMotionX-GPS Drive is a complete GPS navigation solution designed and optimized exclusively for the iPhone. MotionX helps you find what you’re looking for and provides turn-by-turn directions with optional Live Voice Navigation using industry-leading maps. All the functionality of an advanced dedicated turn-by-turn GPS unit is presented in this intuitive iPhone application. With full support for multitasking, routing and live voice guidance instructions continue in the background while listening to streaming music or while using other applications.

The buttons highlighted below are accessible throughout the entire user interface.

GPS requires a direct “line-of-sight” to communicate with satellites. Your iPhone must have a clear view of the sky to locate at least three satellites in order to give accurate position information. If you are indoors, in a wooded area or surrounded by buildings, you may be unable to acquire an accurate signal. The GPS signal strength will be enhanced when your iPhone is connected to a power source.


GPS signal indicator Touch to toggle between outdoor online and indoor offline.

Blue: Outdoor GPS mode; good signal.

Red: Unreliable signal, trying to acquire satellites.

Red Flashing: Indoor Offline Mode; not searching for satellites (GPS chipset off).

Menu: Return to the main menu from any page.

Voice Balloon: Touch to hear your voice guidance repeated.

iPod: Access iPod controls from any page; the control panel slides out and back in when this button is touched.

Map: View map. Function toggles to Search when you go to the Maps page.

3. MenuThe MotionX Menu provides access to the various capabilities of MotionX-GPS Drive. Initiate search and navigation, access your saved destinations, see your current position, view the compass, and access your preferred Settings from this page.

Each menu button is explained here briefly. Additional details for each function are outlined in the subsequent sections of this manual.


Go To: Select a destination from your saved locations, favorites, recently found, and much more.

Directions List: Step-by-step list of maneuvers while actively navigating to a destination.

My Position: View your current location (Lat/Lon and closest known address).

Also view your current speed, heading, altitude, and GPS signal strength.

Settings: Access the various user-based settings and controls.

Search: Launches the MotionX Search Wheel to initiate a search.

Navigation: Select a destination and initiate navigation.

Compass: Go to the MotionX Compass to view current heading, speed, altitude, and Lat/Lon coordinates.

Start Nav: Initiate navigation; button toggles to Stop Nav while actively navigating.

4. SearchFinding businesses and services is easy using the MotionX Search Wheel. Either select a quick category such as gas or emergency, or select the shopping cart button to browse among a wide variety of resources such as beaches, restaurants, Wi-Fi hotspots, and more. Or use the Wikipedia POI search as your own personal tour guide.

Search Wheel Components

1 Shortcut: paste an entire copied address (copied from an email or from Google Maps, for example) into the street address field.


Address: General open-ended address input.1

Browse: Entertainment, Restaurants, Services (e.g. WiFi hotspots), Shopping, Travel & Transportation.

Dining: Restaurants, cafes, taverns and bars.

Parking: Parking lots, garages, and rest stops.

Wikipedia: Explore locations marked by geocoded Wikipedia entries.

Facebook: Post your location to Places, view your friends’ latest check-ins.

Traffic: View a 2D map with live traffic overlays and traffic incidents.

Go Home: Quickly begin navigating home.

Gas: Gas & service stations.

Search: Open-ended search.

Address Book: My Home, Recently Found, Frequent Destinations, Favorites, Saved, iPhone Contacts.

Emergency: Hospitals and medical care facilities.

Airports: Search for airports close to you or near a defined location.

Coffee: Coffee shops.

Resume Nav: Navigate to your most recent destination.

Share: Share via email or Twitter. Email or tweet your current position and/or destination, distance, and estimated arrival time.

Twitter: Tweet your location, destination, and/or ETA.

4. Search (continued)

Search Results - List View


Around Me: Initial search results based on proximity to your current location.

Specify location: Specify an alternate location by city name or zip/postal code.

On Route: Displays results along your route during active navigation.

Destination: Displays results near your destination during active navigation.

Select a listing name to view details, and to proceed to navigation choices.

Directional arrow: Indicates the direction of the POI relative to the direction you are facing or traveling.• The iPhone 4 and 3GS

use the integrated digital compass.

• The iPhone 3G relies on GPS-based direction (must be moving >3 mph for a meaningful indication).

View Map: View all search results overlaid on a map.


Search Results - Map View

If using the ‘On Route’ search option, you may need to select the more button several times to cover the entire route, depending on length.


A blue flag represents the listing name selected in the results panel.

Swipe vertically to view the next search result.

View more search results and/or expand the search area.1

Select the search result to view the listing address and contact info.

Expand to full screen to view a larger area of the map.


Traffic Maps

Selecting the Traffic button from the Search Wheel page is one way to view 2D live traffic maps with color-coded overlays1. Without an active Live Voice Guidance package, traffic data is overlaid on Bing™ maps and is available for the U.S. and Canada. For navigation with a Live Voice Guidance package, traffic data — including incident information — is available for expressways and major arterials serving all the major U.S. markets.

1 The color codes used while actively navigating to a destination are: green - 66-100% of the posted speed limit; yellow - 33-66%; red - 0-33%. Bing Maps use green, yellow, red and black; speeds are illustrated with the following graphic:


If you scroll around the map to view the surroundings, touch the arrow button to re-center around your current position.

The latest traffic data will display automatically as the map moves with your progress.

Touch Back and select the Traffic button again to refresh traffic data.

Swipe inside the text bubble to view multiple incident reports(if applicable).

Tap a traffic icon to view details. Icons with a number indicate multiple incidents in this region.

5. Go ToThe Go To page is the quickest way to enter destination details such as city name, zip code, or even latitude/longitude. It's also convenient to access your recently found destinations, as well your iPhone contacts and any locations you have saved or identified as a favorite.

Home: Store your home address for quick access. Select from five options: use your current location, pick from your iPhone contacts, use a recently round destination, enter an address, or enter Lat/Lon coordinates.

Recently Found: List of all recently found addresses, businesses, and points of interest.

Frequent Destinations: List of your most frequently visited destinations.

Favorites: List of all destinations designated as a favorite. To designate a favorite, view the location details and touch the Edit button, then select the box next to ‘This is a favorite’.

Saved Destinations: List of your saved destinations. To save a destination, view the location details and touch the Save This button. Edit the name if desired.

TapTap Destination Tool: Select a destination by choosing a point on the map. Your selection will be geocoded to the closest known physical address.

Saved Parking Spots: List of your saved parking spots. To save a parking spot, go to the Position page, touch the ‘Parking Spot’ button, then save.

Contacts: Navigate to an address from your iPhone address book. Scroll to find the contact, then touch the field that contains their address.

Address: Enter an address for navigating. As you start to type the city, state and zip code fields, a drop-down list will appear from which you can select the appropriate entry.

Intersection: Enter a street intersection, defined by two road names, for navigating.


5. Go To (continued)

City: Enter a city for navigating; the approximate center of the city will be used for your destination.

Zip/Postal Code: Enter a US zip code or Canadian postal code.

Airport Search: List of airports in your current vicinity (Around Me tab). Select the Specify Location tab to search in an alternate location (enter city or zip/postal code).

Emergency: List of physicians’ offices, medical clinics and hospitals. Select the Specify Location tab to search in an alternate location (enter city or zip/postal code).

Points of Interest: List of Points of Interest in your current vicinity (Around Me tab). Select the Specify Location tab to search in an alternate location (enter city or zip/postal code).

Lat/Lon: Define a destination by entering the latitude and longitude coordinates.

My Current Location: View and navigate to the physical address closest to your current location.1,2

1 Results for My Current Location will be more accurate with a strong GPS signal. Check your signal strength on the Position page (accessible from the main menu). GPS signal strength is shown in the lower right box.

2 Saving the address closest to your current location may be useful to navigate back to this position at a later time, for example when parking a car.


6. NavigationAfter defining a destination using Search or Go To, view the destination details, then start navigating. You may also choose to pre-load maps or simulate a route from the Navigation Choices page. Share your destination details along with the ETA (estimated time of arrival) and a Google Maps link with friends via email.

Location Details

1 Placing a call will force the MotionX-GPS Drive audio session to close; live navigation will continue in the background.

2 If you have selected Live Voice Navigation from the Navigation Choices menu and your Live Voice Guidance package is expired, you will be directed to a list of the currently available package offers. You may optionally use Visual Navigation which does not require an active package.


Name, address and phone number. Touch the phone number to place a call.1

Save This:• Save location.• Add location to your

list of Favorites (access from the Go To menu).

• Save & designate as Home address.

• Edit the name or phone number.

Navigate: Initiate navigation.2

View the map in full screen mode.

Nav Choices:•Select a navigation

mode (Live Voice Navigation or Visual Navigation).

• Pre-load maps.•Simulate a route.

If you scroll around the map to view the surroundings, touch the flag button to re-center the map around your destination.

Share: Share with friends via email or Twitter.Email: send your destination name, address, ETA and a link to view its location using Google Maps or directly in MotionX-GPS Drive.

Twitter: tweet your destination.

6. Navigation (continued)

Navigation ChoicesAccess the Navigation Choices from the Location Details page. Choose between Live Voice Navigation and Visual Navigation. Also, pre-load maps for offline access, or simulate a route.

1 If Walk mode is selected and your speed increases to 20 mph or higher, you will be prompted to switch to Drive mode.


Navigate: Touch to initiate route calculation and navigation.

Drive: Most efficient driving route based on preferred driving options (route type, avoid highways or toll roads, etc.).

Navigation Options:• Live Voice Navigation

requires an active guidance package. 30 days are included with your original app purchase. Additional packages may be purchased with an In-App purchase via your iTunes account.

• Visual Navigation does not require an active package. However this does not include voice guidance or real-time route updates. Manually step through maneuvers.

Pre-Load maps: Run a simulation to pre-load maps for your route. Pre-loaded maps may be accessed offline without a data connection.

Walk: Fastest route for a pedestrian. Highways are avoided and one-way street directions are disregarded.1

More info: View the Live Voice Guidance package options currently available.


Live Voice NavigationLive Voice Navigation plots a route on a map and uses your GPS signal to track your progress along that route. As you approach the next maneuver, you will hear a voice prompt telling you what to do (e.g. “Now turn left...”). Select this option if you are ready to begin navigating and you want to initiate turn-by-turn voice guidance as you drive or walk. A Live Voice Guidance package is required for this option.

1 The street name for your next maneuver will scroll across the navigation bar. If the name is too long and gets cut off, tap the navigation bar to see the full name scroll again.


Flag: The destination is marked by a checkered flag.

Arrow: Current position and heading.

Approach Indicator: Corresponds to the distance from the upcoming maneuver. Appears when you are approximately 1 min from the next turn (depends on current speed).

Navigation bar:•Upcoming street name.1

• Turn direction.•Distance remaining until

the next turn.

Blue line: Highlights your route.

Display auto-rotates between heading, ETA, distance & time remaining.

Maps: Change the map type. Bing™ aerial and hybrid maps are not available while actively navigating to a destination.

Mute button: Turn on/off all audible voice guidance instructions.


Visual NavigationSelect this option to see your route highlighted over the top of a map. Use the vertical arrows on the left side of the map page to skip forward and back manually through each of the maneuvers. If you drive off-course, re-route quickly any time using the Re-route button on the Maps page. A Live Voice Guidance package is *not* required for this option; it is provided as part of the core application.

When navigating with Visual Navigation, the Avoid Freeways and Avoid Toll Roads options (found in Settings > Driving & Traffic Options) are not available, so these settings will not be applied when your route is calculated.


Step number increments as you manually step through the route.

Manually advance through your route one step at a time.

Information about the current maneuver.

Spotlight: Highlights the step selected.

Re Route: Calculates a new route based on your current position. Available while using Visual Navigation.

ETA, distance & time remaining depend on the current step number.


Pre-Load MapsDownload the map data required along a specific route directly to your iPhone for offline access. When you follow your route, pre-loaded maps are utilized in favor of downloading additional data. Define a route starting from your current location, or from any other specified address or saved location. Download up to 2 GB of map data.

Map download steps:1) After finding your destination, select Nav Choices from the Location Details screen.2) Select the Pre-Load Maps button.3) Select Pre-Load Maps to download maps along your route including all zoom levels, -or-

select Simulate & Pre-Load Maps to run an uninterrupted simulation of your route. As the route simulation proceeds, the map tiles displayed on the screen are stored on your iPhone (only one zoom level is cached). Select a simulation speed ranging from 1X to 8X, configurable in Settings > General.


Start at your current position, or define a different location.

Pre-Load Maps: Download maps in the background; includes all zoom levels.If you last used Live Voice Navigation with:• 3D Plus maps, then

MotionX-3D Plus map tiles will be downloaded.

• 2D maps, then 2D and MotionX-3D map tiles will be downloaded.

Simulate & Pre-Load: View a simulation of your route. Map tiles are stored as they are viewed (for a single zoom level only).


Navigation screenWhile actively navigating, select the Navigation button from the main menu to display several fields with useful information and a large visual indicator of the upcoming maneuver direction.

If you deviate from the highlighted route while using live voice guidance, a new route will be calculated automatically. If you do not have a network data connection available at the time, your existing route will be maintained until a network connection becomes available.


Yellow arrow: Direction of the next maneuver. The distance remaining is shown below.

Approach Indicator: Corresponds to the distance from the upcoming maneuver. Appears when you are approximately 1 min from the next turn (depends on current speed).

ETA, time and distance remaining in the trip, destination name.

Upcoming maneuver direction.

Upcoming maneuver street name.


Resume navigationQuickly resume navigation to your most recent destination. Touch the Navigation or Directions List button from the main menu to access this feature.


The name of your most recent destination.

Jump to the MotionX-Search Wheel for a categorized search query.

Jump to the GoTo list to select a destination from recently found, frequent destinations, favorites, contacts, etc.


Voice Options (iPhone 3GS and later)1

Select a voice announcement preference in Settings > Voice & Sounds. Voice options during Live Voice Navigation include:

4) Natural: announces upcoming maneuvers without using street names. For example: “In 200 feet, turn right.”

5) Synthesized: includes street name announcements. For example: “In 200 feet, turn right onto Pacific Avenue.”

1 The synthesized speech option is not available on the iPhone 3G due to memory limitations that cause performance issues.


The synthesized voice (with spoken street names) is available during Live Voice Navigation for users with an active guidance package.

View the current Live Voice Guidance package offers.


Multi-Stop RoutingTo use multi-stop routing, first route to your final destination. Once the route is calculated, add additional stops by finding a destination and selecting the Navigate button. You'll be asked if you want to cancel the existing route or add it as a stop. A message will display on the screen when you have arrived at each stop, along with an offer to Resume Navigation. Select Resume Navigation to continue routing to your next stop or final destination.

By default, the order of your stops is optimized to provide the fastest routing (during Live Voice Guidance only). To define the order of the stops yourself, go to Settings> Driving & Traffic Options and turn off "Optimize Stops Order". Once optimize is off, first route to your destination, then add stops in the order you'd like them to be used in the routing.


Stops: Marked by a blue flag. Add up to nine stops along the route to your final destination.

7. MapsTwo types of maps are used in MotionX-GPS Drive: three-dimensional maps (3D) and two-dimensional maps (2D). The map options and controls are described in this section.

3D Maps• Default map during Live Voice Navigation• Default map during a simulated trip• 3D maps can also be used while not navigating, using the Maps button


Maps: Select from the following 3D map types: • 3D Plus: large names

float above street level for select roads.

• 3D: all streets names are built into the map.

+ / - Buttons: Zoom in & out.

Current position; good GPS signal.

7. Maps (continued)

2D Maps1

• Bing™ Road, Aerial, or Hybrid maps• Traffic flow and traffic incident maps• North up, course up, or direction up

1 While navigating, select 2D maps and zoom out to visualize your entire route.

2 Bing™ aerial and hybrid maps are not available while actively navigating to a destination.


Position estimated with Network triangulation.

Simulation running.

Position unknown; no GPS signal.

Position will not remain centered.

Position centered; course-up.

Position remains centered on map.

Arrow (touch to toggle):

Maps: Select from the following 2D map types: • Road• Aerial2

• Hybrid2

• TrafficPosition centered; direction-up.

7. Maps (continued)

Traffic Maps

Select Traffic from the Maps button to view 2D live traffic maps with color-coded overlays1. For navigation with a Live Voice Guidance package, traffic data — including incident information — is available for expressways and major arterials serving all the major U.S. markets. Without an active Live Voice Guidance package, traffic data is overlaid on Bing™ maps and is available for the U.S.and Canada.

1 The color codes used while actively navigating to a destination are: green - 66-100% of the posted speed limit; yellow - 33-66%; red - 0-33%. Bing Maps use green, yellow, red and black; speeds are illustrated with the following graphic:


Swipe inside the text bubble to view multiple incident reports(if applicable).

Tap a traffic icon to view details. Icons with a number indicate multiple incidents in this region.

Touch the map anywhere to make incident details disappear.

Icon definitions:

Construction & road maintenance

Traffic incidents & accidents

Concerts & events

7. Maps (continued)

MotionX TapTap® toolTo select a destination directly from the map, tap twice on the map to bring up the MotionX TapTap® tool.


Drag the underlying map to place the flag on top of your desired destination.

The flag position is geocoded to the closest known physical address.

Select: Navigate to this destination.

7. Maps (continued)

LandscapeMotionX-GPS Drive offers a full landscape-based user interface.

Night ModeSelect low-brightness night mode maps from Settings > Map Settings.


8. Directions ListWhile actively navigating to a destination, select the List button from the main menu to see a list of the maneuvers over the course of your route.


Start: Your first maneuver is shown at the bottom the page; the sequence is shown from bottom to top.

The upcoming maneuver is highlighted so you’ll know at a glance where to turn next.

Maneuver symbols are shown for each step.

9. CompassThe MotionX Compass shows such information as heading, current speed, current location, and the next maneuver information during active navigation. The iPhone 3GS and iPhone 4 leverage the built-in magnetometer (digital compass). The compass page is useful for pedestrian navigation, for example.

The magnetometer in the iPhone is susceptible to magnetic interference from electronics and ferrous metals. If an accurate direction cannot be achieved due to interference, you will be instructed to move away from the interference and re-calibrate the magnetometer by moving your iPhone in a figure 8 pattern. Disable these warnings from Settings > Map Settings.


Current latitude(decimal degrees).

Navigation bar (visible only during active navigation).• Upcoming street name• Turn direction• Distance remaining

until the next turn Current altitude(feet or meters).

Current speed(mph or km/h).

Current longitude(decimal degrees).

Blue arrow: Indicates the bearing to your destination.

9. Compass (continued)

For the satellite-based compass (GPS mode) to provide an accurate heading, you should be outdoors with a clear view of the sky and moving at least a few mph or km/h.


Magnetic Mode: Uses the built-in magnetometer. The icon is a compass rose (8-pointed star). 3GS only.

GPS Mode: Heading is determined using orderly changes in position.

Auto Mode: Uses the magnetometer at speeds less than 5 mph and GPS positional changes above 5 mph. The icon is a sextant.

Compass Modes(touch to toggle):

Simulation Mode: Compass button is blue while a simulation is running.

Weak GPS signal: Red compass button indicates weak or no GPS signal.

10. PositionThe Position page geocodes your current location and displays the closest known address. Save the address or make it your home; refresh on-command. The GPS signal strength is also displayed, along with Lat/Lon, altitude, speed and current heading.

1 Saving the address closest to your current location may be useful to navigate back to this location at a later time.

2 If your GPS signal strength indicator is yellow or red, the geocoded address displayed may be significantly inaccurate (up to hundreds of feet).

The speed displayed is an approximation and should not be used as an absolute indication of your actual speed. Please refer to your vehicle’s speedometer.


Add the address to your Saved Destinations (Menu>Go To).1

No Signal: GPS signal is obstructed (indoors, wooded area, urban canyon, etc.)

Disabled: outdoor GPS mode is manually turned off via the globe button prompt.

If the signal indicator says: GPS Signal: 2

Green: Strong signal.

Yellow: Average signal.

Red: Weak signal; position information may be inaccurate/unreliable.

Refresh: Touch to refresh/update the address based on current location.

Save the current address to your Parking Spots list (Menu>Go To).

Share: Share with friends via email or Twitter.Email: send your location, destination, address, and/or ETA with a link to view its location using Google Maps or directly in MotionX-GPS Drive.

Twitter: tweet your current address while not navigating; tweet your destination, distance, and ETA while navigating.

10. Position (continued)

Swipe the screen to transition between My Position, Directions List, and Navigation pages, for easy access during navigation.


11. SettingsUse the MotionX Settings page to learn about MotionX-GPS Drive package offers and to control various application settings. Your current Live Voice Guidance package status is shown at the top of this page.

Live Voice Guidance OptionsSelect the View Optional Package Offers button to view the current Live Voice Guidance packages available. There are no subscriptions or automatic renewals. Any purchases are accrued; your package will be extended by the amount corresponding to your purchase.

Driving & Traffic OptionsDriving options control how a driving route is calculated; they do not affect walking directions.• Choose from fastest route, shortest route, avoid freeways, or avoid toll roads.• Optionally use traffic data to calculate a better route.• Choose whether to send traffic probe data to help improve the accuracy of

traffic information.• Optionally show traffic incidents (construction, accidents, events, etc.) overlaid

on the map.• Choose whether to optimize the order of stops in a multi-stop trip (for use

during Live Voice Guidance only). With this option turned off, or while using Visual Navigation, routing will proceed in the order stops are added.

Voice & Sound• Turn voice guidance ON to keep you informed without taking your eyes off the

road.• Either pause the iPod during voice guidance instructions, or fade the iPod audio

into the background with spoken directions announced on top (default setting).• Set the voice guidance to a desirable level (relative to your music) using the

volume slider labeled Voice Guidance Volume. This will not affect the volume of your music or application sound effects.

• Set the Master Audio Setting to a desirable level using the slider control. If your iPhone’s Bluetooth is turned on, you can use your Bluetooth-enabled device/system to control the master audio (visible only when a stereo Bluetooth system is detected).

• Choose a voice option (iPhone 4 and 3GS). “Natural” voice is an actual voice recording and does not include street names. Synthesized voice includes spoken street names; this option requires an active Live Voice Guidance package.

• Optional button click sound effects.


11. Settings (continued)

Voice & Sound (continued)

Multiple voice options are available via in-app purchase, including synthesized (with spoken street names) and natural (without street names) voices, accessible by selecting Voice & Sound from the Settings menu.


Get and Manage Voices: Access the various voice options (male voice, female UK accent, etc.) available for in-app purchase.

Preview: Touch to hear an audible preview of the voice.

Voice selection: “Karen Natural Voice” and “Heather” (synthesized voice with spoken street names) are included with the original app purchase. When you download a new voice option via in-app purchase, it will be added to this list and selectable.

11. Settings (continued)

General

• Units: Select either imperial or metric.

• Simulation: Virtually drive through a route before your actual trip. You can speed up the simulation to as high as 8X to get a faster overview. Map tiles are cached on your device during simulations.

• Enable or disable high-accuracy GPS mode, compass interference warnings, and parking spot marker prompts.

• Reset to factory defaults, which erases all stored content.

Map Settings• Cache up to 2GB of downloaded map images for faster map loading. Old map

images will be replaced automatically once you reach the memory limit. Your current cache usage is displayed. Select the “Clear Stored Maps” button to empty the cache.

• Night Mode: Display maps with a dark color scheme ideal for viewing in low-light conditions. Automatic mode chooses the best color scheme based on the time of day.

Help & InfoAccess the FAQ, report a navigation problem by sending us a routing log, or send general feedback, all from within the application.

MotionX-IDManage your MotionX-ID: change your ID (email address), password, or sign out. Also view all other devices that are logged in using your ID (using your Live Voice Guidance purchases) and choose to remove them if you would like.

FacebookLog into your Facebook account to look at your friends’ recent check-ins using Facebook Places.


12. In-Car DisplaysView MotionX-GPS Drive maps, routing, and guidance details on an in-vehicle head unit display, using the iPhone interface as a control point.

Display SettingsMotionX-GPS Drive supports video out for viewing maps, routing, and guidance information on an in-vehicle display, such as an audio/video automobile stereo head unit. Creating a dual-screen experience, the MotionX-GPS Drive user interface on the iPhone is used as the control point for the maps and routing information shown on the in-car display. Available for the iPhone 4.

Connect your iPhone to a head unit display using one of the following cables, for example:

• Composite AV• Component AV• Dock Connector to VGA Adapter

Launch iPhone Settings, select iPod, then scroll to "TV Out" to adjust the video output setting. If your head unit video display appears compressed, try switching your iPhone’s Widescreen setting to ON. If the head unit display output is stretched, switch Widescreen to OFF. Other video control settings may be specific to your particular head unit or display.


http://store.apple.com/us/product/MC748ZM/A




http://store.apple.com/us/product/MC552ZM/B

http://store.apple.com/us/product/MC552ZM/B

12. In-Car Displays (continued)

Supported Head UnitsMotionX-GPS Drive is compatible with the following Pioneer and JVC head units.

Pioneer A/V Units:

• AppRadio• AVH-P3300BT• AVH-P4300DVD• AVH-P6300BT• AVIC-Z120BT

To gain full, direct, adapter-free control via the receiver interface, Pioneer recommends the following iPod/iPhone interface cables:

CD-IU50V (AVH-P3300BT, AVH-P6300BT, and the AVIC-Z120BT)CD-IU200V (AVH-P4300DVD)

Follow these video instructions to set up your Pioneer head unit.

JVC Multimedia A/V Receivers:

• KW-AVX640• KW-AVX740• KW-AVX840• KW-ADV794

JVC recommends the JVC KS-U30 video cable for iPod/iPhone for full charging, audio control, and video display. Follow these video instructions to set up your JVC head unit.


http://www.pioneerelectronics.com/PUSA/Portable/iPod-And-Bluetooth-Accessories/CD-IU50V




http://www.youtube.com/watch?v=aeZm38YAVOE

http://www.youtube.com/watch?v=aeZm38YAVOE

http://mobile.jvc.com/product.jsp?modelId=MODL028545&pathId=126&page=2

http://mobile.jvc.com/product.jsp?modelId=MODL028545&pathId=126&page=2

http://www.youtube.com/watch?v=VLLdkqsDWN0

http://www.youtube.com/watch?v=VLLdkqsDWN0

13. AccessoriesMotionX recommends the following accessories to facilitate the best possible navigation experience with MotionX-GPS Drive on your iPhone.

Belkin Dash MountThe Belkin Dash Mount mounts your iPhone at eye level on your car's windshield or dashboard, putting all of your street maps, directions (and more) within view and within reach. This also gives your iPhone a clear view of the sky for the best GPS signal. More details and other mounts.

Griffin PowerJolt car charger1 Plug the 2.1 amp PowerJolt into your cigarette lighter or 12V accessory socket and charge your iPhone’s battery during use. More details. Your iPhone’s GPS signal strength will be enhanced when it is connected to a power source.

1 Use a 2.1 amp charger to ensure your iPhone maintains a positive charge while using GPS and accessing the cellular network with MotionX-GPS Drive.


http://drive.motionx.com/iphone/accessories/




13. Terms and Conditions

END-USER LICENSE AGREEMENT

This is a legal agreement between you and Fullpower Technologies, Inc. (“Fullpower”) regarding your use of the MotionX™‑GPS Drive software (the “Software”). By using the Software, you agree to be bound by the terms of this End-User License Agreement (this “EULA”). If you do not agree to the terms of this EULA, you are not entitled to use the Software and must de-install the Software from all of your devices.

License. Subject to the terms and conditions of this EULA, Fullpower grants you a non-exclusive, non-transferable, non-assignable license (without right of sublicense) to install and use one copy of the Software on your personal mobile device in machine executable object code form solely for your personal use.

Restrictions. The Software and any related documentation are protected by United States copyright law and international treaty provisions. You may not copy, modify, adapt, translate into any language, distribute, or create derivative works based on the Software without the prior written consent of Fullpower. You may not assign this EULA or any of the rights or licenses granted under this EULA or rent, lease, or lend the Software to any person or entity. Any attempted sublicense, transfer, or assignment in violation of this EULA is void. You acknowledge that the Software contains proprietary trade secrets of Fullpower and its suppliers. You agree not to decompile, disassemble, reverse engineer, or attempt to reconstruct, identify, or discover any source code, underlying ideas, underlying user interface techniques, or algorithms of the Software by any means whatsoever, except to the extent the foregoing restriction is prohibited by applicable law.

Ownership. The Software is licensed, and not sold, to you under this EULA. You have no ownership rights in the Software, Services or any related documentation. Fullpower and its suppliers retains all right, title, and interest in and to the Software and Services (including any changes, modifications, or corrections thereto) and any related documentation.

Suggestions. If you elect to provide or make available to Fullpower any suggestions, comments, ideas, improvements, or other feedback or materials related to the Software or Services (collectively, “Suggestions”), Fullpower will be free to use, disclose, reproduce, modify, license, transfer and otherwise distribute your Suggestions in any manner and you will gain no right, title or interest in or to the Software or Services by virtue of Fullpower doing so.

Uploads. The Software may provide functionality through which you are able to upload information (such as images, waypoints and tracks) about your use of the Software (collectively, “Uploads”) to Fullpower’s servers and to notify others about the availability of your Uploads (the “Upload Service”). If you use such functionality, you authorize Fullpower to retain your Uploads on its servers, to reproduce, publish and make your Uploads available to anyone you notify about the availability of your Uploads, and to disclose the user name you submitted with your Uploads. In addition, if you elect to share your Uploads with the MotionX community, you authorize Fullpower to retain your Uploads on its servers, to reproduce, publish and make your Uploads available to any third party, and to disclose the user name you submitted with your Uploads. In addition to the Upload Service, the Software may provide functionality through which you are able to receive other services from Fullpower (such other services and the Upload Service, collectively, the “Services”). Fullpower will have no obligation to provide any Services, may change the form and nature of any Services at any time with or without notice to you, will have no liability whatsoever to you or any third party for any failure of the Software or Services to transmit your Uploads to or from Fullpower’s


servers, may cease providing any Services at any time with or without notice to you, and will have no obligation to retain your Uploads (or any other materials you may provide to Fullpower) on its servers or return your Uploads (or any other materials you may provide to Fullpower) to you before deleting them from its servers.

Storage. The Software may provide functionality through which you are able to store information (such as images) on the device on which you are using the Software. Fullpower will have no liability whatsoever to you or any third party for any failure of the Software to store any such information on such device.

Personal Information. By using the Software, you agree to the collection, retention and processing of your personal data (including the location of your mobile device and) by Fullpower and its suppliers and to the storage and processing of such personal information on computers located outside of the country in which you reside. Even though Fullpower has taken steps intended to protect your personal information from being intercepted, accessed, used, or disclosed by unauthorized persons, Fullpower cannot fully eliminate security risks associated with your personal information and cannot guarantee that its systems will not be breached. See Fullpower’s Privacy Policy at www.motionx.com for additional information regarding Fullpower’s use of your personal information.

Disclaimer of Warranty. THE SOFTWARE AND SERVICES ARE PROVIDED “AS IS” AND “WITH ALL FAULTS” AND THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE SOFTWARE AND SERVICES IS WITH YOU. SHOULD THE SOFTWARE OR SERVICES PROVE DEFECTIVE, YOU ASSUME THE ENTIRE COST OF ALL NECESSARY SERVICING AND REPAIR. FULLPOWER AND ITS SUPPLIERS HEREBY DISCLAIM ALL WARRANTIES WITH RESPECT TO THE SOFTWARE AND SERVICES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF MERCHANTABILITY, NON-INFRINGEMENT, OR FITNESS FOR A PARTICULAR USE OR PURPOSE. FULLPOWER AND ITS SUPPLIERS DO NOT WARRANT THAT THE SOFTWARE OR SERVICES WILL MEET YOUR REQUIREMENTS IN ANY RESPECT, OR THAT THE OPERATION OF THE SOFTWARE OR SERVICES WILL BE UNINTERRUPTED OR ERROR-FREE, OR THAT ERRORS IN THE SOFTWARE OR SERVICES OR NONCONFORMITY TO ITS OR THEIR DOCUMENTATION CAN OR WILL BE CORRECTED. YOU ACKNOWLEDGE THAT THE PROVISIONS OF THIS SECTION ARE A MATERIAL INDUCEMENT AND CONSIDERATION TO FULLPOWER AND ITS SUPPLIERS TO GRANT THE LICENSE CONTAINED IN THIS EULA AND TO PROVIDE YOU WITH ACCESS TO THE SERVICES.

Use of MotionX-GPS Drive is at the User's Own Risk. THE SOFTWARE AND SERVICES ARE NOT FAA CERTIFIED AND MUST NOT BE USED FOR PRIMARY NAVIGATION. THE SOFTWARE AND SERVICES MAY NOT TO BE USED FOR SAFETY OF LIFE APPLICATIONS, OR FOR ANY OTHER APPLICATION IN WHICH THE ACCURACY OR RELIABILITY OF THE SOFTWARE OR SERVICES COULD CREATE A SITUATION WHERE PERSONAL INJURY OR DEATH MAY OCCUR. DO NOT ATTEMPT TO CONFIGURE THE SOFTWARE OR INPUT INFORMATION WHILE DRIVING. FAILURE TO PAY FULL ATTENTION TO THE OPERATION OF YOUR VEHICLE COULD RESULT IN DEATH, SERIOUS INJURY, OR PROPERTY DAMAGE. BY USING THE SOFTWARE, YOU ASSUME ALL RESPONSIBILITY AND RISK.

Limitation of Liability. TO THE EXTENT PERMITTED BY LAW, IN NO EVENT SHALL FULLPOWER OR ITS SUPPLIERS BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR PUNITIVE DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTIONS, LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY LOSS) ARISING OUT OF THIS EULA, YOUR USE OF OR INABILITY TO USE THE SOFTWARE OR SERVICES, OR YOUR USE OF OR RELIANCE ON ANY DATA (INCLUDING GPS DATA) YOU MAY ACCESS IN CONNECTION WITH YOUR USE OF THE SOFTWARE OR SERVICES, EVEN IF FULLPOWER OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Exclusions. Some jurisdictions do not allow the exclusion of certain warranties or the limitation or exclusion of liability for incidental or consequential damages. Accordingly, some of the above limitations and disclaimers may not apply to you. To the extent that Fullpower may not, as a matter of applicable law, disclaim any implied warranty or limit its liabilities, the scope and duration of such warranty and the extent of Fullpower’s liability shall be the minimum permitted under such applicable law.

Termination. This EULA is effective until it is terminated. You may terminate this EULA at any time by destroying all copies of the Software and related documentation in your possession or under your control.


http://www.motionx.com/

http://www.motionx.com/

This EULA will automatically terminate if you violate any of the terms of this EULA. Upon termination of this EULA, all license rights granted to you shall immediately terminate. All other provisions of this EULA shall survive such termination.

Export Laws. You acknowledge that the laws and regulations of the United States restrict the export and re-export of commodities and technical data of United States origin, including the Software. You agree that you will not export or re-export the Software in any form in violation of the laws of the United States or any foreign jurisdiction. By installing or using the Software, you represent and warrant that you are not (a) a national or resident of any country to which the United States has embargoed goods, or (b) on the United States Treasury Department’s list of Specially Designated Nationals or the U.S. Commerce Department’s Table of Denial and Prohibition Orders.

U.S. Government End Users. The Software and related documentation are “Commercial Items,” as that term is defined at 48 C.F.R. §2.101, consisting of “Commercial Computer Software” and “Commercial Computer Software Documentation,” as such terms are used in 48 C.F.R. §12.212 or 48 C.F.R. §227.7202, as applicable. Consistent with 48 C.F.R. §12.212 or 48 C.F.R. §§227.7202-1 through 227.7202-4, as applicable, the Software and related documentation are being licensed to U.S. Government end users (a) only as “Commercial Items,” and (b) with only those rights as are granted to all other end users pursuant to the terms and conditions herein.

Miscellaneous. This EULA is the entire agreement between you and Fullpower with respect to, and supersedes any previous oral or written communications or documents (including, if you are obtaining an update, any agreement that may have been included with an earlier version of the Software) concerning, the subject matter of this EULA. In no event shall any additional or inconsistent term in any purchase order or similar document submitted by you modify the terms of this EULA. This EULA is governed by the laws of the State of California, USA, as such laws apply to contracts between California residents entered into and performed entirely in California (notwithstanding your place of residency). You agree that any dispute arising from or relating to this EULA shall be brought exclusively in a court of competent jurisdiction, federal or state, located within the State of California, County of San Francisco, and in no other jurisdiction, and you hereby consent to personal jurisdiction and venue in, and agree to service of process issued or authorized by, such court. This EULA will not be governed by the U.N. Convention on Contracts for the International Sale of Goods. If any provision of this EULA is found to be invalid or unenforceable, it will be enforced to the extent permissible and the remainder of this EULA will remain in full force and effect. Failure by Fullpower to prosecute any right with respect to a default hereunder will not constitute a waiver by Fullpower of the right to enforce rights with respect to the same or any other breach.

Contact Us. You may contact us at Fullpower Technologies, Inc., 1200 Pacific Avenue, Suite 300, Santa Cruz, CA 95060, USA and visit http://www.motionx.com/faq/ for Software support issues.

End-User Terms Required by Apple. You acknowledge and agree that (i) this EULA is concluded between you and Fullpower, and not Apple, Inc. (“Apple”); (ii) Fullpower, and not Apple, is solely responsible for the Software; (iii) Apple has no responsibility whatsoever to furnish any maintenance and support services with respect to the Software; (iv) in the event of any failure of the Software to conform to any applicable warranty, you may notify Apple and Apple will refund the purchase price you paid for the Software; (v) to the maximum extent permitted by applicable law, Apple will have no other warranty obligation whatsoever with respect to the Software; (vi) Apple is not responsible for any claims that you have arising out of your use of the Software; (vii) Apple will have no responsibility whatsoever for the investigation, defense, settlement or discharge of any third-party claim that the Software infringes that third party’s intellectual property rights; and (viii) Apple and its subsidiaries are third party beneficiaries of this EULA and, upon your acceptance of this EULA, Apple will have the right (and will be deemed to have accepted the right) to enforce this EULA against you as a third party beneficiary. You represent and warrant that: (i) you are not located in a country that is subject to a U.S. Government embargo, or that has been designated by the U.S. Government as a “terrorist supporting” country; and (ii) you are not listed on any U.S. Government list of prohibited or restricted parties.

End-User Terms Required by Navteq. The Software utilizes map data that Fullpower licenses from Navteq Corporation (“NAVTEQ”). The following copyright notices apply to such map data (“NAVTEQ Data”):


http://www.motionx.com/faq/

http://www.motionx.com/faq/

© 2011 NAVTEQ. All rights reserved.

The NAVTEQ Data for areas of Canada includes information taken with permission from Canadian authorities, including: © Her Majesty the Queen in Right of Canada, © Queen's Printer for Ontario, © Canada Post Corporation, GeoBase®, © Department of Natural Resources Canada. All rights reserved.

NAVTEQ holds a non-exclusive license from the United States Postal Service® to publish and sell ZIP+4® information.

© United States Postal Service® 2011. Prices are not established, controlled or approved by the United States Postal Service®. The following trademarks and registrations are owned by the USPS: United States Postal Service, USPS, and ZIP+4.

End-User Terms Required by Microsoft. Fullpower licenses content from Microsoft Corporation (“Microsoft”). During your use of the Software you may encounter and use the Microsoft content, to which the additional terms and conditions found at http://go.microsoft.com/fwlink/?LinkId=21969 will apply. All information collected by Microsoft in connection with your use of the Software (such as, but not limited to, your IP address, request, time of submission and the results returned to you) will be subject to the then-current Microsoft Online Privacy Statement, a current copy of which is available at http://privacy.microsoft.com/en-us/fullnotice.aspx.


http://go.microsoft.com/fwlink/?LinkId=21969

http://go.microsoft.com/fwlink/?LinkId=21969

http://privacy.microsoft.com/en-us/fullnotice.aspx




Documents

MotionX GPS Drive Manual