2
MOST150 Controllers PXI 6161, PXIe 6161 Interface: MOST Ports: 1 Extension: CAN/LIN Transceiver: INIC OS81110 Connector: MOST 2 + 0 GOEPEL electronic’s all-new MOST150 supporting communication controllers PXI 6161 and PXIe 6161 are based on the highly powerful Series 61. Using this new hardware platform, users are able to individually and flexibly configure the controller according to their individual needs. Using PowerPC architecture, the host PC is relieved and valuable bandwidth for additional application is obtained, enabling complex and CPU-intensive processes to be executed on the 6161 card. Based on the latest MOST150 integrated circuit INIC OS81110 and the corresponding SpyNIC, both modules are fully capable of stimulating and streaming MOST content. A number of additional functions are fully integrated into the firmware for example ring break diagnosis (RBD), several trigger inputs and outputs and the functionality for creating a parallel CAN/LIN network are also fully implemented. The modules are able to be master, slave and/or spy and by using several modules in a PXI or PXIe system the results are various unique and simultaneous MOST networks. Highlights MOST protocol for 150 Mbit/s oPHY Switchable frame rate between 44.1 kHz and 48 kHz Support of: MOST control channel, MOST packet channel, MOST streaming channel, MOST ethernet channel MOST High Protocol V2.2 on packet or control channel On-board diagnostic via MOST High Protocol V2.2 or TP2.0 Ring break diagnostic Additional frontal Ethernet port S/PDIF in/out DVI out Additional frontal Trigger inputs and outputs Two optional CAN/LIN interfaces

MOST150 Controllers - GÖPEL electronic · The communication controller 6161 supports the data transfer by means MOST150 standard via optical physical layer. An FPGA component as

  • Upload
    others

  • View
    4

  • Download
    0

Embed Size (px)

Citation preview

Page 1: MOST150 Controllers - GÖPEL electronic · The communication controller 6161 supports the data transfer by means MOST150 standard via optical physical layer. An FPGA component as

MOST150 ControllersPXI 6161, PXIe 6161

Interface: MOSTPorts: 1Extension: CAN/LINTransceiver: INIC OS81110Connector: MOST 2 + 0

GOEPEL electronic’s all-new MOST150 supporting communication controllers PXI 6161 and PXIe 6161 are based on the highly powerful Series 61. Using this new hardware platform, users are able to individually and flexibly configure the controller according to their individual needs. Using PowerPC architecture, the host PC is relieved and valuable bandwidth for additional application is obtained, enabling complex and CPU-intensive processes to be executed on the 6161 card. Based on the latest MOST150 integrated circuit INIC OS81110 and the corresponding SpyNIC, both modules are fully capable of stimulating and streaming MOST content. A number of additional functions are fully integrated into the firmware for example ring break diagnosis (RBD), several trigger inputs and outputs and the functionality for creating a parallel CAN/LIN network are also fully implemented. The modules are able to be master, slave and/or spy and by using several modules in a PXI or PXIe system the results are various unique and simultaneous MOST networks.

Highlights• MOST protocol for 150 Mbit/s oPHY• Switchable frame rate between 44.1 kHz and 48 kHz• Support of:

MOST control channel, MOST packet channel, MOST streaming channel, MOST ethernet channel

• MOST High Protocol V2.2 on packet or control channel• On-board diagnostic via MOST High Protocol V2.2 or TP2.0• Ring break diagnostic• Additional frontal Ethernet port• S/PDIF in/out• DVI out• Additional frontal Trigger inputs and outputs• Two optional CAN/LIN interfaces

Page 2: MOST150 Controllers - GÖPEL electronic · The communication controller 6161 supports the data transfer by means MOST150 standard via optical physical layer. An FPGA component as

[email protected] [email protected] [email protected] [email protected]

Automotive Test Solutions

MO / E / 032011

GOEPEL electronic GmbH

Goeschwitzer Straße 58 / 60

07745 Jena / Germany

Tel: + 49 (0) - 36 41 - 68 96 - 0

Fax: + 49 (0) - 36 41 - 68 96 - 944

Email: [email protected]

Internet: www.goepel.com

Authorised Distributor:

ISO 9001 certified

HardwareThe communication controller 6161 supports the data transfer by means MOST150 standard via optical physical layer. An FPGA component as node on the module realises the interface adaptation of the MOST150 communication controller INIC OS81110.

SoftwareThe communication controller 6161 provides several opportunities of software support according to customer requests. A universal driver layer (C and LabVIEW API) offers the ideal basis for integrators to be utilised in customer specific applications. Additionally, easy to use libraries can be integrated into different test sequencers and, thus, guarantee compatibility with existing and new systems.

Type Brief Description Order No.

PXI 6161 MOST150 Controller for PXI 1061-000

PXIe 6161 MOST150 Controller for PXIe 1061-200

PXI 6161

Net2Run

Supported Interfaces

myCAR™

CAN

/LIN

XCS6SLX45FPGA

PPC460EXPowerPCOS85652

IO-CompanionOS81110MOST150SPYNIC

OS81110MOST150

INIC

OS85652IO-Companion

Ethe

rnet

LVDS

MUX

MO

ST E

OT

6 pin MLB

6 pin MLB

cPCI

/PXI

cPC

Ie/P

XIe

S/PD

IF D

VI S/PDIF Transceiver

DVI Converter

RBD

Block DiagramCommunication Controller 6161

MOST150 Controllers