www.barloworld-equipment.com

© 2017 Caterpillar. All Rights Reserved. CAT, CATERPILLAR, BUILT FOR IT™, their respective logos, “Caterpillar Yellow,” the “Power Edge”trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

MORETHANMACHINESTECHNOLOGY•MAINTENANCE•REPAIRS

CYLINDERS

MORETHANMACHINESTECHNOLOGY•MAINTENANCE•REPAIRS

ENGINES | TRANSMISSION | FINAL DRIVE | CYLINDERS

WHY REPAIR BEFORE FAILURE?Repairing before failure helps you take advantage of the value built into Cat® Genuine parts.

Repair options are available for:

For more information visit www.barloworld-equipment.com or call 010 040 7410.

Repair your machine and...• Extend your machine life for a fraction of the cost of a new one• Get out of frame repair for a quicker turnaround time• Choose from a range of options and repairs you want• Get a 12-month warranty

TRANSMISSION FINAL DRIVE CYLINDERSENGINES

Barloworld Equipment offers you repair options on selected machines and components, with wear and maintenance, common repair and critical repair solutions that focus on engines, transmissions, cylinders and final drives. Repair your machine before failure and avoid unscheduled down time.

Contactmarketing2@barloworld-equipment.com

INTRODUCTION

INTRODUCTION

www.barloworld-equipment.com

INDEX

www.barloworld-equipment.com

MOTOR GRADERS120G MOTOR GRADER

HYDRAULIC EXCAVATORS 390F HYDRAULIC EXCAVATOR

BACKHOE LOADERS 424D BACKHOE LOADER

ARTICULATED TRUCKS740 ARTICULATED TRUCK745C ARTICULATED TRUCK

WHEEL LOADERS 938H WHEEL LOADER950G WHEEL LOADER988B WHEEL LOADER

TRACK TYPE DOZERS D6R TRACK TYPE DOZERD7R TRACK TYPE DOZERD9T TRACK TYPE DOZER

CYLINDER INDEX

REPAIR OPTIONS

CYLINDERS

www.barloworld-equipment.com

© 2017 Caterpillar. All Rights Reserved. CAT, CATERPILLAR, BUILT FOR IT™, their respective logos, “Caterpillar Yellow,” the “Power Edge”trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

120G MOTOR GRADER (87V)

www.barloworld-equipment.com

CYLINDERS

Page 189

Disassembled parts and items noted under Visual Inspect will be compared to Caterpillar reusability guidelines.Parts found not to meet reuse will be replaced or reconditioned at an additional cost.

PRE-FIX PART NUMBER CYLINDER NAME OPTION87V 8J8777 Centre Shift Cylinder87V 3G5226 Centre Shift Cylinder87V 9T2374 Centre Shift Cylinder87V 8J8589 Blade Lift Cylinder 2 X Bearings (8J6384)87V 3G5225 Blade Lift Cylinder87V 9T2471 Blade Lift Cylinder 2 X Bearings (8J6384)87V 8J0028 Blade Side Shift87V 9T2483 Blade Side Shift87V 1052094 Blade Side Shift87V 9J3466 Blade Tip87V 6E1549 Blade Tip Cylinder87V 9T2461 Blade Tip Cylinder87V 9T6461 Blade Tip Cylinder87V 8J5538 Steering Cylinder 1 X Bearing (058639) & 1 X Bearing (4151925)87V 8J8820 Steering Cylinder 1 X Bearing (058639) & 1 X Bearing (4151925)87V 3G8069 Steering Cylinder 1 X Bearing (058639) & 1 X Bearing (4151925)87V 3G8070 Steering Cylinder87V 9T2393 Steering Cylinder 1 X Bearing (058639) & 1 X Bearing (4151925)87V 9T2395 Steering Cylinder 1 X Bearing (058639) & 1 X Bearing (4151925)87V 8J8590 Articulation Cylinder 2 X Bearing (8D9814)& 4 X Seal (7K9201)87V 9T2447 Articulation Cylinder 2 X Bearing (8D9814)& 4 X Seal (7K9201)87V 9T8785 Articulation Cylinder 2 X Bearing (8D9814)& 4 X Seal (7K9201)87V 8J5539 Wheel Lean Cylinder 2 X Bearing (8D7086)& 4 X Seal (7K9202) 87V 3G4752 Wheel Lean Cylinder 2 X Bearing (2G8631)& 4 X Seal (4337105)87V 9T2520 Wheel Lean Cylinder 2 X Bearing (2G8631)& 4 X Seal (4337105)87V 1219242 Wheel Lean Cylinder 2 X Bearing (2G8631)& 4 X Seal (4337105)

87V 8J7321 Scarifier Cylinder 1 X Bearing (8D7086) & 1 X Bearing (8D7996) & 2 X Seal (7K9202) & 2 X Seal (3P1461)

87V 3G1853 Scarifier Cylinder 2 X Bearing (8D7086) & 4 X Seal (7K9202)87V 9T2554 Scarifier Cylinder 2 X Bearing (8D7086) & 4 X Seal (7K9202)

Terms and conditions:• Transportation / travel time/mileage not included

on all levels and options• Customer to provide lifting equipment (where

required)• All prices are excluding VAT• Component must be in a working condition

(Hydraulic Cylinder) (Cylinder to be clean ondelivery.)

• Commissioning documents to be completed wheninstalling cylinder

• Oil sample to be taken at 50 hours• Removal and Installation costs and parts not

included• All prices are fixed for a specific marketing period

and are subject to change

REPAIR OPTIONS

CYLINDERS

www.barloworld-equipment.com

© 2017 Caterpillar. All Rights Reserved. CAT, CATERPILLAR, BUILT FOR IT™, their respective logos, “Caterpillar Yellow,” the “Power Edge”trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

390F HYDRAULIC EXCAVATOR (GAY)

www.barloworld-equipment.com

CYLINDERS

Page 191

Disassembled parts and items noted under Visual Inspect will be compared to Caterpillar reusability guidelines.Parts found not to meet reuse will be replaced or reconditioned at an additional cost.

PRE-FIX PART NUMBER CYLINDER NAME OPTION

GAY 3629780 Boom Cylinder 1 X Bushing (2444258) & 1 X Bushing (1722997) & 4 X Seal (1135950)

GAY 4707141 Boom Cylinder 1 X Bushing (2444258) & 1 X Bushing (1722997) & 4 X Seal (1135950)

GAY 3631685 Stick Cylinder 2 X Bushing (1722848) & 4 X Seal (9X4600)

GAY 3625365 Bucket Cylinder 1 X Bushing (1985529) & 1 X Bushing (6E0813) & 4 X Seal (9X4600)

GAY 3639317 Bucket Cylinder 1 X Bushing (1985529) & 1 X Bushing (6E0813) & 4 X Seal (9X4600)

GAY 4933810 Bucket Cylinders 1 X Bushing (1722848) & 1 X Bushing (3088824) & 1 X Seal (9X4600) & 1 X Seal (1135950)

GAY 3624589 Bucket Cylinders 1 X Bushing (1722848) & 1 X Bushing (3088824) & 1 X Seal (9X4600) & 1 X Seal (1135950)

GAY 1559197 Counterweight Cylinder 1 X Bushing (7Y4666) & 1 X Bushing (7Y5102) & 2 X Seal (7X4803) & 1 X (960854)Terms and conditions:

• Transportation / travel time/mileage not included on all levels and options

• Customer to provide lifting equipment (where required)

• All prices are excluding VAT• Component must be in a working condition

(Hydraulic Cylinder) (Cylinder to be clean on delivery.)

• Commissioning documents to be completed when installing cylinder

• Oil sample to be taken at 50 hours• Removal and Installation costs and parts not

included• All prices are fixed for a specific marketing period

and are subject to change

REPAIR OPTIONS

CYLINDERS

www.barloworld-equipment.com

© 2017 Caterpillar. All Rights Reserved. CAT, CATERPILLAR, BUILT FOR IT™, their respective logos, “Caterpillar Yellow,” the “Power Edge”trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

424D BACKHOE LOADER (RXA)

www.barloworld-equipment.com

CYLINDERS

Page 193

Disassembled parts and items noted under Visual Inspect will be compared to Caterpillar reusability guidelines.Parts found not to meet reuse will be replaced or reconditioned at an additional cost.

PRE-FIX PART NUMBER CYLINDER NAME OPTIONRXA 2060514 Backhoe Bucket Cylinder 2 X Bushing (9R0162)

RXA 2060518 Backhoe Bucket Cylinder 2 X Bushing (9R0162)

RXA 2063628 Boom Cylinder 4 X Bushing (9R0139)

RXA 2060509 Stick Cylinder 4 X Bushing (9R0139)

RXA 2359831 Stick Cylinder 4 X Bushing (9R0139)

RXA 2063549 Lift Cylinder 2 X Bushing (9R0153) & 2 X Bushing (9R0321)

RXA 2063553 Tilt Cylinder 2 X Bearing (9T0766) & 2 X Bushing (9R0320)

RXA 1734565 Stabilizer Cylinder 1 X Bearing (9R7215)

RXA 1917735 Swing Cylinders 2 X Bearing (9T2883) & 2 X Bushing (9R9505)

RXA 1918161 Swing Cylinders 2 X Bearing (9T2883) & 2 X Bushing (9R9505)

RXA 2283506 Swing Cylinders 2 X Bearing (9T2883) & 2 X Bushing (2744274)

RXA 2283507 Swing Cylinders 2 X Bearing (9T2883) & 2 X Bushing (2744274)

RXA 1917725 Extendable Stick Cylinder

RXA 1851839 Multipurpose Bucket Cylinder 2 X Bearing (9T4007)

RXA 2145097 Steering Cylinder

Terms and conditions:• Transportation / travel time/mileage not included

on all levels and options• Customer to provide lifting equipment (where

required)• All prices are excluding VAT• Component must be in a working condition

(Hydraulic Cylinder) (Cylinder to be clean on delivery.)

• Commissioning documents to be completed when installing cylinder

• Oil sample to be taken at 50 hours• Removal and Installation costs and parts not

included• All prices are fixed for a specific marketing period

and are subject to change

REPAIR OPTIONS

CYLINDERS

www.barloworld-equipment.com

© 2017 Caterpillar. All Rights Reserved. CAT, CATERPILLAR, BUILT FOR IT™, their respective logos, “Caterpillar Yellow,” the “Power Edge”trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

740 ARTICULATED TRUCK (B1P)

www.barloworld-equipment.com

CYLINDERS

Page 195

Disassembled parts and items noted under Visual Inspect will be compared to Caterpillar reusability guidelines.Parts found not to meet reuse will be replaced or reconditioned at an additional cost.

PRE-FIX PART NUMBER CYLINDER NAME OPTIONB1P 2231335 Steering Cylinder 2 X Bearing (6V5002) & 4 X Seal (3U9657) & 4 X Seal (7F2122)

B1P 141667 Hoist Cylinders 1 X Bearing (665815)

B1P 2414068 Hoist Cylinders 1 X Bearing (665815)

B1P 2854034 Hoist Cylinders 1 X Bearing (665815)

Terms and conditions:• Transportation / travel time/mileage not included

on all levels and options• Customer to provide lifting equipment (where

required)• All prices are excluding VAT• Component must be in a working condition

(Hydraulic Cylinder) (Cylinder to be clean on delivery.)

• Commissioning documents to be completed when installing cylinder

• Oil sample to be taken at 50 hours• Removal and Installation costs and parts not

included• All prices are fixed for a specific marketing period

and are subject to change

REPAIR OPTIONS

CYLINDERS

www.barloworld-equipment.com

© 2017 Caterpillar. All Rights Reserved. CAT, CATERPILLAR, BUILT FOR IT™, their respective logos, “Caterpillar Yellow,” the “Power Edge”trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

745C ARTICULATED TRUCK (LFK)

www.barloworld-equipment.com

CYLINDERS

Page 197

Disassembled parts and items noted under Visual Inspect will be compared to Caterpillar reusability guidelines.Parts found not to meet reuse will be replaced or reconditioned at an additional cost.

PRE-FIX PART NUMBER CYLINDER NAME OPTIONLFK 4288692 Hoist Cylinder 2 X Bearing (665815) & 4 X Seal (4951468) & 4 X Seal (5K9090)

LFK 2231335 Steering Cylinder 2 X Bearing (6V5002) & 4 X Seal (3U9657) & 4 X Seal (7F2122)

Terms and conditions:• Transportation / travel time/mileage not included

on all levels and options• Customer to provide lifting equipment (where

required)• All prices are excluding VAT• Component must be in a working condition

(Hydraulic Cylinder) (Cylinder to be clean on delivery.)

• Commissioning documents to be completed when installing cylinder

• Oil sample to be taken at 50 hours• Removal and Installation costs and parts not

included• All prices are fixed for a specific marketing period

and are subject to change

REPAIR OPTIONS

CYLINDERS

www.barloworld-equipment.com

© 2017 Caterpillar. All Rights Reserved. CAT, CATERPILLAR, BUILT FOR IT™, their respective logos, “Caterpillar Yellow,” the “Power Edge”trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

938H WHEEL LOADER (LKM)

www.barloworld-equipment.com

CYLINDERS

Page 199

Disassembled parts and items noted under Visual Inspect will be compared to Caterpillar reusability guidelines.Parts found not to meet reuse will be replaced or reconditioned at an additional cost.

PRE-FIX PART NUMBER CYLINDER NAME OPTIONLKM 2549034 Lift Cylinder 2 X Seal (7K9209) & 2 X Bushing (4V8674)

LKM 9T7823 Tilt Cylinder 2 X Seal (7K9208) & 1 X Bushing (3G5285) & X 2 Seal (7K9209) & 1 X Bushing (1J2303)

LKM 3111463 Coupler Cylinder 1 X Kit Seal Check Valve (2138433)

LKM 3612507 Coupler Cylinder 1 X Kit Seal Check Valve (2138433)

LKM 3612508 Coupler Cylinder 1 X Kit Seal Check Valve (2138433)

LKM 1393312 Steering Cylinder 4 X Seal (7K9203) & 2 X Bushing (3G4704)

LKM 3149340 Steering Cylinder 4 X Seal (7K9203) & 2 X Bushing (3G4704)

Terms and conditions:• Transportation / travel time/mileage not included

on all levels and options• Customer to provide lifting equipment (where

required)• All prices are excluding VAT• Component must be in a working condition

(Hydraulic Cylinder) (Cylinder to be clean on delivery.)

• Commissioning documents to be completed when installing cylinder

• Oil sample to be taken at 50 hours• Removal and Installation costs and parts not

included• All prices are fixed for a specific marketing period

and are subject to change

REPAIR OPTIONS

CYLINDERS

www.barloworld-equipment.com

© 2017 Caterpillar. All Rights Reserved. CAT, CATERPILLAR, BUILT FOR IT™, their respective logos, “Caterpillar Yellow,” the “Power Edge”trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

950G WHEEL LOADER (M5K)

www.barloworld-equipment.com

CYLINDERS

Page 201

Disassembled parts and items noted under Visual Inspect will be compared to Caterpillar reusability guidelines.Parts found not to meet reuse will be replaced or reconditioned at an additional cost.

PRE-FIX PART NUMBER CYLINDER NAME OPTIONM5K 3870611 Lift Cylinder 2 X Seal (5173209) & 2 X Sleave (5173208)

M5K 3870612 Lift Cylinder 2 X Seal (5173209) & 2 X Sleave (5173208)

M5K 4526974 Lift Cylinder 2 X Seal (5173209) & 2 X Sleave (5173208)

M5K 4526975 Lift Cylinder 2 X Seal (5173209) & 2 X Sleave (5173208)

M5K 3870613 Tilt Cylinder 2 X Seal (5173209) & 2 X Seal (5173218) & 1 X Sleave (5173211) & 1 X Sleave (5173217)

M5K 4725051 Tilt Cylinder 2 X Seal (5173209) & 2 X Seal (5173218) & 1 X Sleave (5173211) & 1 X Sleave (5173217)

M5K 3870614 Steering Cylinder

M5K 4522509 Coupler Cylinder

Terms and conditions:• Transportation / travel time/mileage not included

on all levels and options• Customer to provide lifting equipment (where

required)• All prices are excluding VAT• Component must be in a working condition

(Hydraulic Cylinder) (Cylinder to be clean on delivery.)

• Commissioning documents to be completed when installing cylinder

• Oil sample to be taken at 50 hours• Removal and Installation costs and parts not

included• All prices are fixed for a specific marketing period

and are subject to change

REPAIR OPTIONS

CYLINDERS

www.barloworld-equipment.com

© 2017 Caterpillar. All Rights Reserved. CAT, CATERPILLAR, BUILT FOR IT™, their respective logos, “Caterpillar Yellow,” the “Power Edge”trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

988B WHEEL LOADER (50W)

www.barloworld-equipment.com

CYLINDERS

Page 203

Disassembled parts and items noted under Visual Inspect will be compared to Caterpillar reusability guidelines.Parts found not to meet reuse will be replaced or reconditioned at an additional cost.

PRE-FIX PART NUMBER CYLINDER NAME OPTION50W 8J5779 Type 1 Lift Cylinder 2 X Bearing (1V7001) & 2 X Seal (7K9218)

50W 8J5779 Type 2 Lift Cylinder 2 X Bearing (1V7001) & 2 X Seal (7K9218)

50W 1U4679 Lift Cylinder 2 X Bearing (1V7001) & 2 X Seal (7K9218)

50W 9T8257 Lift Cylinder 2 X Bearing (1V7001) & 2 X Seal (7K9218)

50W 4T7854 Lift Cylinder 2 X Bearing (1V7001) & 2 X Seal (7K9218)

50W 3G2976 Type 1 Tilt Cylinder 1 X Bushing (1V7036) & 1 X Bushing (1V6934) & 4 X Seal (5P2671)

50W 3G2976 Type 2 Tilt Cylinder 1 X Bushing (1V7036) & 1 X Bushing (1V6934) & 4 X Seal (5P2671)

50W 4T6792 Type 2 Tilt Cylinder 1 X Bushing (1V7036) & 1 X Bushing (1V6934) & 4 X Seal (5P2671)

50W 9J3632 Type 2 Tilt Cylinder 1 X Bushing (1V7036) & 1 X Bushing (1V6934) & 4 X Seal (5P2671)

50W 9J8165 Steering Cylinder 2 X Bushing (9J5875) & 4 X Seal (7K9204)

Terms and conditions:• Transportation / travel time/mileage not included

on all levels and options• Customer to provide lifting equipment (where

required)• All prices are excluding VAT• Component must be in a working condition

(Hydraulic Cylinder) (Cylinder to be clean on delivery.)

• Commissioning documents to be completed when installing cylinder

• Oil sample to be taken at 50 hours• Removal and Installation costs and parts not

included• All prices are fixed for a specific marketing period

and are subject to change

REPAIR OPTIONS

CYLINDERS

www.barloworld-equipment.com

© 2017 Caterpillar. All Rights Reserved. CAT, CATERPILLAR, BUILT FOR IT™, their respective logos, “Caterpillar Yellow,” the “Power Edge”trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

D6R TRACK TYPE DOZER (S6X)

www.barloworld-equipment.com

CYLINDERS

Page 205

Disassembled parts and items noted under Visual Inspect will be compared to Caterpillar reusability guidelines.Parts found not to meet reuse will be replaced or reconditioned at an additional cost.

PRE-FIX PART NUMBER CYLINDER NAME OPTIONS6X 2270844 Lift Cylinder 2 X Bushing (4J6374)

S6X 2270841 Tilt Cylinder 1 X Bearing (2J8489)

S6X 2339132 Tilt Cylinder 1 X Bearing (2J8489)

S6X 3679478 Tilt Cylinder 1 X Bearing (2J8489)

S6X 2270842 Ripper Cylinder 1 X Bushing (4K3128) & 1 X Bushing (2K4507)

S6X 3845351 Ripper Cylinder 1 X Bushing (4K3128) & 1 X Bushing (2K4507)

Terms and conditions:• Transportation / travel time/mileage not included

on all levels and options• Customer to provide lifting equipment (where

required)• All prices are excluding VAT• Component must be in a working condition

(Hydraulic Cylinder) (Cylinder to be clean on delivery.)

• Commissioning documents to be completed when installing cylinder

• Oil sample to be taken at 50 hours• Removal and Installation costs and parts not

included• All prices are fixed for a specific marketing period

and are subject to change

REPAIR OPTIONS

CYLINDERS

www.barloworld-equipment.com

© 2017 Caterpillar. All Rights Reserved. CAT, CATERPILLAR, BUILT FOR IT™, their respective logos, “Caterpillar Yellow,” the “Power Edge”trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

D7R TRACK TYPE DOZER (DSH)

www.barloworld-equipment.com

CYLINDERS

Page 207

Disassembled parts and items noted under Visual Inspect will be compared to Caterpillar reusability guidelines.Parts found not to meet reuse will be replaced or reconditioned at an additional cost.

PRE-FIX PART NUMBER CYLINDER NAME OPTIONDSH 1291908 Blade Lift Cylinder 2 X Bushing (6E1108)

DSH 9T6113 Blade Tilt Cylinder 2 X Bushing (4J6374)

DSH 3G4533 Blade Tilt Cylinder 2 X Bushing (4J6374)

DSH 1647320 Ripper Lift Cylinder 2 X Bushing (3G5999)

DSH 1894645 Ripper Tilt Cylinder 2 X Bushing (3G5999)

Terms and conditions:• Transportation / travel time/mileage not included

on all levels and options• Customer to provide lifting equipment (where

required)• All prices are excluding VAT• Component must be in a working condition

(Hydraulic Cylinder) (Cylinder to be clean on delivery.)

• Commissioning documents to be completed when installing cylinder

• Oil sample to be taken at 50 hours• Removal and Installation costs and parts not

included• All prices are fixed for a specific marketing period

and are subject to change

REPAIR OPTIONS

CYLINDERS

www.barloworld-equipment.com

© 2017 Caterpillar. All Rights Reserved. CAT, CATERPILLAR, BUILT FOR IT™, their respective logos, “Caterpillar Yellow,” the “Power Edge”trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

D9T TRACK TYPE DOZER (RJS)

www.barloworld-equipment.com

CYLINDERS

Terms and conditions:• Transportation / travel time/mileage not included

on all levels and options• Customer to provide lifting equipment (where

required)• All prices are excluding VAT• Component must be in a working condition

(Hydraulic Cylinder) (Cylinder to be clean on delivery.)

• Commissioning documents to be completed when installing cylinder

• Oil sample to be taken at 50 hours• Removal and Installation costs and parts not

included• All prices are fixed for a specific marketing period

and are subject to change

Page 209

Disassembled parts and items noted under Visual Inspect will be compared to Caterpillar reusability guidelines.Parts found not to meet reuse will be replaced or reconditioned at an additional cost.

PRE-FIX PART NUMBER CYLINDER NAME OPTIONRJS 1658633 Blade Lift Cylinder 2 X Bushing (5J1192)

RJS 2256727 Blade Lift Cylinder 2 X Bushing (5J1192)

RJS 3805284 Blade Lift Cylinder 2 X Bushing (5J1192)

RJS 1098832 Blade Tilt Cylinder 1 X Bearing (7J3297) & 2 X Bushing (1U2182)

RJS 1098833 Blade Tilt Cylinder 1 X Bearing (7J3297) & 2 X Bushing (1U2182)

RJS 5218442 Blade Tilt Cylinder 1 X Bearing (7J3297) & 2 X Bushing (1U2182)

RJS 1325132 Ripper Cylinder 2 X Bushing (3G5999)

RJS 4Z6363 Ripper Cylinder 2 X Bushing (3G5999)

RJS 5218391 Ripper Cylinder 2 X Bushing (3G5999)

RJS 1325149 Ripper Cylinder 2 X Bushing (3G5999)

RJS 4Z6364 Ripper Tip Cylinder 2 X Bushing (3G5999)

RJS 6E3113 Ripper Pin Puller Cylinder