RPD06/R2 – SPECIFICATIONSSUSPENDED, SURFACE

ALWUSA.COM

ETL Listed2108

MOONDISHRPD06/R2 | SUSPENDED, SURFACE

STANDARD SIZESRing diameters of 2, 3, or 4 feet

LAMPINGLED - 90+ CRI - 2700K/3000K/3500K/4000KOutput Options: Standard/RGB/RGBWDimming down to 0%

FINISH18 standard finishes available at no extra chargeRAL classic colors, TCI / Tiger Drylac catalog colors, and custom colormatch also available

CONSTRUCTIONIndustrial Strength Extruded Aluminum Frame

RPD06/R2 – SPECIFICATIONSSUSPENDED, SURFACE

ALWUSA.COM2 of 6

SS010720-A.0

PRODUCT SUBMITTAL WORKSHEET

1. BASE MODEL (CHOOSE ONE)

RPD06-R2PRPD06-R2S

Ceiling PendantCeiling or Wall Surface Mount

SAMPLE PRODUCT CODERPD06-R2P — D4 — 3500 — 0/10V/1% — LENS— BK — BAL — UNV — EMB 1 2 3 4 5 6 7 8 9

3. LED LAMPING (CHOOSE ONE)

2700300035004000RGBRGBW

2700K (very warm)3000K (warm)3500K (slightly warm)4000K (neutral)Red, Green, and Blue LEDRed, Green, Blue, and White (4000K) LED

2. SIZE (CHOOSE ONE)

D2D3D4

2' (24") outer diameter3' (36") outer diameter4' (48") outer diameter

SIZE DELIVEREDLUMENS (LM) WATTS (W) APPROX. WEIGHT

(LBS.)

D2 1547 lm 57W 10 lbs.

D3 2312 lm 85W 15 lbs.

D4 3201 lm 104W 20 lbs.

Performance data is measured at 3100K CCT.

4. REMOTE DRIVER (CHOOSE ONE .STD & RGB(W) TABLE INDICATES COMPATIBLE LED LAMPING)

0/10V/S0/10V/1%0/10V/0%ECOSYS1LTEADMX

0-10V dimming down to 10% (Standard Dimming)0-10V dimming down to 1%0-10V premium dimming down to 0%(L3DA) Lutron Hi-lume 1% EcoSystem 24V LED DriverLutron Hi-lume 1% 2-wire TRIAC dimming (120V forward-phase only), constant voltageDMX flicker-free dimming down to 0%

*Driver specifications provided upon request.

●●●●●●

STD

RG

B(W

)

●

5. LENS

LENS Sandblasted clear lexan lens

RPD06/R2 – SPECIFICATIONSSUSPENDED, SURFACE

ALWUSA.COM3 of 6

SS010720-A.0

8. VOLTAGE

UNV Universal Voltage (120VAC-277VAC)

9. EMERGENCY OPTIONS (OPTIONAL)

EMB Emergency Battery Pack

6. FINISH — EXTERIOR (CHOOSE ONE. SEE PAGE 5 FOR LARGER SWATCHES AND ADDITIONAL INFORMATION)

BA Brushed Aluminum

STANDARD FINISHES

SPECIAL ORDER FINISHES

RAL____CAT____CCM____

Specify RAL Classic Color (Ex: RAL 3003) - Most RAL Colors are available for powder coat. See www.alwusa.com/finishesSpecify Catalog Colors - Specify colors from the Tiger Drylac and TCI catalogsCustom Color Match - Specify a custom powder coat color match

ALUMINUM

GW SW AWTWTB

Gloss WhiteSatin WhiteAntimicrobial Satin WhiteTextured Matte WhiteTextured Matte Black

BASIC POWDER COAT

CSOBDBSB

Clear SilverOil-Rubbed BronzeDark BronzeSatin Black

SATIN ANODIZED EFFECT POWDER COAT

SGCGCUBR

Silver GrayCharcoal GrayCopperBrass

METALLIC POWDER COAT

GOGRGMGB

Orange (RAL 2003)Red (RAL 3020)Magenta (RAL 4010)Blue (RAL 5015)

GLOSS POWDER COAT (80-95% GLOSS)

7. FINISH — INTERIOR (CHOOSE ONE. SEE PAGE 5 FOR LARGER SWATCHES AND ADDITIONAL INFORMATION)

BA Brushed Aluminum

STANDARD FINISHES

SPECIAL ORDER FINISHES

RAL____CAT____CCM____

Specify RAL Classic Color (Ex: RAL 3003) - Most RAL Colors are available for powder coat. See www.alwusa.com/finishesSpecify Catalog Colors - Specify colors from the Tiger Drylac and TCI catalogsCustom Color Match - Specify a custom powder coat color match

ALUMINUM

GW SW AWTWTB

Gloss WhiteSatin WhiteAntimicrobial Satin WhiteTextured Matte WhiteTextured Matte Black

BASIC POWDER COAT

CSOBDBSB

Clear SilverOil-Rubbed BronzeDark BronzeSatin Black

SATIN ANODIZED EFFECT POWDER COAT

SGCGCUBR

Silver GrayCharcoal GrayCopperBrass

METALLIC POWDER COAT

GOGRGMGB

Orange (RAL 2003)Red (RAL 3020)Magenta (RAL 4010)Blue (RAL 5015)

GLOSS POWDER COAT (80-95% GLOSS)

RPD06/R2 – SPECIFICATIONSSUSPENDED, SURFACE

ALWUSA.COM4 of 6

SS010720-A.0

MECHANICAL DIAGRAMS

72 inches

Cable: One aircraft cable loops round the

stem to two swivel griplock grippers on

the fixture

LEDs: High performance LED

boards shine thru a sandblasted clear

lexan lens for perfect illumination.

RPD06 R2-P: Section A-A side cut view

RPD06 R2-S 4ft (48in)Seen here in white paint

RPD06 R2-S 2ft (24in)Seen here in silver paint

RPD06 R2-S 3ft (36in)Seen here in blue paint

RPD06 R2-P: bottom view

2 feet (24 inches)3 feet (36 inches)4 feet (48 inches)

0.625 inch Dia Stem

AA

1.625 inches

Interior & Exterior Surfaces: The inside surfaces can have a color

difference than the exterior surfaces.

RPD06 R2-P: cut view

WIREGAUGE

D2 (White)57W

D2 (RGB/W)32W

D3 (White)85W

D3 (RGB/W)48W

D4 (White)52W (x2)

D4 (RGB/W)29W (x2)

18 AWG 50 ft. 34 ft. 35 ft. 20 ft. 25 ft. 38 ft.

16 AWG 85 ft. 59 ft. 55 ft. 36 ft. 40 ft. 66 ft.

14 AWG 130 ft. 98 ft. 90 ft. 63 ft. 65 ft. 109 ft.

12 AWG 210 ft. 162 ft. 140 ft. 105 ft. 105 ft. 179 ft.

10 AWG 335 ft. 262 ft. 220 ft. 172 ft. 170 ft. 290 ft.

MOONDISH VOLTAGE DROP CHART FOR REMOTE DRIVERS — 24VDCFor best performance, ensure proper wire gauge is installed between the remote LED driver and canopy that is dropping power to your fixture. This chart only applies to RPD06/R2 at 24VDC. Do not use this chart to calculate voltage drop for other fixtures. Estimated 9 Watts per linear foot (W/lf) for White LEDs, and 5 W/lf for RGB/RGBW LEDs.

Dimension as reference D2 : 12.7 " D3 : 16 " D4 : 19.5 "

RPD06/R2 – SPECIFICATIONSSUSPENDED, SURFACE

ALWUSA.COM5 of 6

SS010720-A.0

STANDARD FINISHES

ALUMINUM

BrushedAluminum

Standard finishes are available at no additional charge.

METALLIC POWDER COAT

SilverGray

CharcoalGray

Copper Brass

BASIC POWDER COAT

GlossWhite

SatinWhite

AntimicrobialSatinWhite

TexturedMatteWhite

GLOSS POWDER COAT (80-95% GLOSS)

OrangeRAL 2003

RedRAL 3020

MagentaRAL 4010

BlueRAL 5015

SATIN ANODIZED EFFECT POWDER COAT

ClearSilver

Oil-RubbedBronze

DarkBronze

SatinBlack

CS OB DB SB

SG CG CU BRGW SW

GO GR GM GB

TexturedMatteBlack

TB

SPECIAL ORDER FINISHES*

AW TW

Most RAL Classic Colors are available for a minimum setup fee. On your specification submittal choose your RAL color by entering the 4-digit RAL code (Ex: RAL 3003). See www.alwusa.com/finishes

RAL CLASSIC COLORS (80-95% GLOSS): RAL_ _ _ _

The complete range of powder coat colors from Tiger Drylac and TCI catalogs are available for a minimum setup fee. Consult ALW for a catalog color you would like to specify.

CATALOG COLORS: CAT_ _ _ _

Custom powder coat color matching is available for a premium setup fee. Consult ALW for additional information.

CUSTOM COLOR MATCH: CCM_ _ _ _

BA

*An individual setup fee will apply to each unique Special Order Finish per purchase order. (ex: RAL 5023 and RAL 2008 are specified for multiple line items on a purchase order. 2x setup fees will apply)

RPD06/R2 – SPECIFICATIONSSUSPENDED, SURFACE

ALWUSA.COM6 of 6

SS010720-A.0

LENS

Sandblasted clear lexan lens

HOUSING

100% recyclable, extruded architectural grade aluminum

SAFETY & REGULATORY ETL Listed (U.S. & Canada). Suitable for dry or damp locations.Conforms to UL std. 2108, Low Voltage Luminaires / Low Voltage Lighting Systems.Certified to CSA std. C22.2#250.0:2008 Ed. 3+G1;G2.

OPERATING TEMPERATURE

Luminaire should be installed and operated ONLY in dry or damp environments where the ambient temperature ranges from -4°F to 122°F ( -20°C to 50°C). Luminaire operation in environments outside the listed temperature range voids the warranty AND may damage the product or adversely impact lamp life, lumen output and color consistency.

ADDITIONAL OPTIONS & SPECIFICATIONS