Monopoint Systems Monopoints - Oil Rubbed Bronze Finish

415-504-3536

415-504-3536 TG23 3/6/19 • • teganlighting.com 1info@teganlighting.com •

Category: Oil Rubbed Bronze Monopoints are 12VAC (only) components. The Twist & Click system allows the luminaires to be easily removed for cleaning or relamping. The luminaires click into the connector, the threaded jacket then screws into position to lock the connection in place. Once fixed, the luminaires are free to rotate or alternatively, can be secured in place using two locking pins.

Material: Solid brass conductors. Solid and plated Mounting, Spots and Accessories. Finish: Oil Rubbed Bronze Finish (BRZ). Important note: The BRZ finish is a hand rubbed finish and the dyes are also hand mixed. As a result, there will be minor color variations from part-to-part within an order and/or batch to batch. In addition, as with all bronze finishes, (without a top coat) it can change color as it ages.

System: Tegan Monopoints.

Mounting: Monopoint Recessed Flat Plate - Remote Power Supply (MPRFP-RP-BRZ), Monopoint Recessed Trimless - Remote Power Supply (MPRTL-RP-AL), Monopoint Panel Mount - Remote Power Supply (MPPM-RP-BRZ), Round J-Box Mount Monopoint - Intergral Transformer (MP-RD-JB-60IT-120/277V-BRZ), Square J-Box Mount - Integral Transformer (MBSQ-IT-120/277V-BRZ), Single Monopoint - Recessed Enclosure - 30W - Transformer (M-1-RE-30-IT), Single Monopoint - Recessed Enclosure - 108W - Transformer (M-1-RE- 108-IT), Double Monopoint - Recessed Enclosure - 108W - Transformer (M-2-RE-108-IT).

Spot No Connector required for Monopoints.Connectors:

Spots: Claro (Claro-BRZ), Tiro with Short Glare Shield (Tiro-SGS-BRZ), Tiro with Frit Glass Shield - (Tiro-FGS-BRZ).

Accessories: 72” Spot Extension (SpotExt72-BRZ), Monopoint Decorative Cover (MPDC-BRZ), Monopoint Plug (MP-BRZ), Universal Slope Ceiling Adapter (USCA-BRZ)

Electrical: 300W Max. per circuit. NOTE: Centro Trac is 12VAC for MR-16 LED or Halogen (only). NOTE: For dimming LED MR-16 lamps (Soraa) with 12VAC transformers, please refer to our MR-16 LED Specsheet.

Power Supply: Refer to 12VAC Electronic Transformer Specsheet or 12VAC Magnetic Transformer Specsheet for Power Supply options.

Installation: Refer to Installation Instructions for details. For system layout, and specification assistance, refer to the Trac Design Guide under the Gallery link.

IP 12VAC 300WMAX LED HALOGEN

MR-16 LED

Labels: ETL & CE Listed; Tested to UL 1574 - Issue: 2004/09/07 Ed: 3 Rev:2012/01/25 UL Standard for Safety Track Lighting Systems. IP20. Interior use only. In a continuing effort to offer the best product possible we reserve the right to change, without notice, specifications or materials. Technical specification sheets that appear on teganlighting.com are the most recent version and supersede all other versions that exist in any other printed or electronic form. 3 Year Warranty.

Monopoint Systems Monopoints - Oil Rubbed Bronze Finish

415-504-3536

415-504-3536 TG23 3/6/19 • • teganlighting.com 2info@teganlighting.com •

Monopoint Bronze Example:TG - MPPM - BRZ - TIRO - SGS - BRZ/4 - SpotExt72 - BRZ/4

TeganMonopoint/Quantity 1,2,3 Finish

TG

MPRFP-RPMPRTL-RPMPPM-RPMP-RD-JB-60IT-120V/277VMPSQ-60IT-120V or 277VM-1-RE-30-IT6

M-1-RE-108-IT6

M-2-RE-108-IT6

_ _ _Voltage2,5

120V277V

_BRZ

Notes:1 Spotlight and Power Supply are specified separately. Refer to 12VAC Electronic Transformer Specsheet or 12VAC Magnetic Transformer Specsheet above for more detail.2 Select one.3 List quantity of components required for a complete system. Specify after slash. 4 For use with the Recessed Trimless Remote Power Supply (MRTL-RP) only.5 Voltage applies to Round/Square J-Box Mount and Recessed Monopoint only. Leave blank for all others.6 Refer to p. 4 for Recessed Enclosure Power Supply details.

CLARO-BRZTIRO-SGS-BRZTIRO-FGS-BRZ

Spot/Quantity2,3

SpotAccessory/Quantity3

SpotExt72-BRZ

_

Accessories/Quantity2,3

MPDC4

MP4

USCA-AL

_Power Supply(s)2

_ Refer to 12VAC Electronic Transformer Specsheet or 12VAC Magnetic Transformer Specsheet

5mm(1/4”)

ø35mm(1 -3/8”)

Monopoints

The Trimless Monopoint features the Twist & Click System for a wide variety of Spotlights. Electrical Rating: 50W (max) at 12VAC. Cut out hole: ø1.77 (45mm). Minimum Ceiling Height: 2.17” (55mm). Maximum Ceiling Thickness: 1.58” (40mm). Plastering up to the Twist & Click opening leaves a .75” (19mm) hole that can be concealed with an included Monopoint Plug (MP-BRZ) when not in use. Optional Monopoint Cover can be used when the Trimless Monopoint cannot be plastered in. Accessory: Monopoint Decorative Cover 2.44” (62mm) (MPDC-BRZ). The body of the Trimless Monopoint is supplied in AL finish; once installed there are no visible parts. The supplied Monopoint Plug is an Oil Rubbed Bronze finish. Refer to Installation Instructions for details.

50

ø60

50

ø60

Plaster

50mm(2”)

ø60mm(2 -3/8”)

Ceiling

Recessed Trimless - Remote Power Supply (MPRTL-RP-BRZ)

The Panel Mount Monopoint features the Twist & Click System for a wide variety of Spotlights. This Monopoint is the smallest in scale and is designed primarily for displays, casework and exhibitions. It can be fixed through panels up to 1.2” (30mm) thick. Electrical Rating: at 50W (max) at 12AC. Cut out hole: ø.98” (25mm). Minimum Ceiling Height: 1.77” (45mm). Maximum Material Thickness: 1.2” (30mm). Accessory: Monopoint Plug – .75” (19mm) (MP-BRZ). Available in Oil Rubbed Bronze (BRZ) finish. Refer to Installation Instructions for details.

Panel Mount - Remote Power Supply (MPPM-RP-BRZ)

ø33mm(1 -1/4”)ø33

36

Ceiling

Cover

Monopoint Plug (MP)

36mm(1 -3/8”)

The Recessed Flat Plate Monopoint features the Twist & Click System to accept a wide variety of Spotlights. Electrical Rating: 50W (max) at 12VAC. Cut out hole: ø.98” (25mm). Minimum Ceil-ing Height: 1.77” (45mm). Plastering up to the Twist & Click opening leaves a .75” (19mm) hole that can be concealed with an optional Monopoint Plug (MP-BRZ) when not in use. Accessory: Monopoint Plug – .75” (19mm) (MP-BRZ). Available in Oil Rubbed Bronze (BRZ) finish. Refer to Installation Instructions for details.

Recessed Flat Plate - Remote Power Supply (MPRFP-RP-BRZ)

20

5

ø60

ø62

Power

20mm(13/16”)

20

5

ø60

ø62

Power

20

5

ø60

ø62

Power

ø60mm(2 -3/8”)

ø62mm(2 -7/16”)

5mm(1/4”)

Ceiling

Cover

Monopoint Systems Monopoints - Oil Rubbed Bronze Finish

415-504-3536

415-504-3536 TG23 3/6/19 • • teganlighting.com 3info@teganlighting.com •

Monopoints (cont’d)

* Halogen/LED Spotlights utilize MR-16 LED Lamps (by others) and are used with 12VAC low voltage transformers. LED Spotlights are dedicated LED’s and are used with 24VDC drivers. Refer to MR-16 LED Specsheet for more information.

609mm(24”)

ø16mm(5/8”)

ø79mm(3 -1/8”)

ø89mm(3 -1/2”)

ø51mm(2”)

The Cantilever Monopoint features the Twist & Click System for a wide variety of Spotlights and Mini-Kore Pendants. This Monopoint mounts to the wall or ceiling and extends the Spot-light 24”, perpendicular to the mounting surface. (Shown with Claro Spotlight, not included with Monopoint; specify desired fixture separately.) Electrical Rating: at 50W (max) at 12VAC. Monopoints are not designed with internal isolation for metal ceiling installation. Contact factory for isolation gaskets. Refer to Installation Instructions for details.

Cantilever Monopoint - Remote Power Supply (CMP - RP)

The J-Box Monopoint features an 60W Integral Transformer for 120V or 277V (IT-120/277) with the Twist & Click System accepts a wide variety of LED 12VAC MR-16 and AR111 Spotlights. Electri-cal Rating: 60W (max) at 12VAC. Oil-Rubbed Bronze (BRZ). Refer to chart below for transformer specifications.

Monopoint J-Box Mount, 60W Integral Trans-former (MP-RD-JB-60IT-120V/277V-BRZ)

25mm1”)

ø120mm(4- 3/4”)

The Monopoint Square J-Box Mount features an 60W Integral Transformer for 120V or 277V with the Twist & Click System that accepts a wide variety of 12VAC MR-16 and AR111 Spotlights. Electrical Rating: 60W (max) at 12VAC. Painted Bronze (BRZ). Refer to chart below for transformer specifications.

Monopoint Square J-Box Mount, 60W Integral Transformer (MPSQ-60IT-120V or 277V-BRZ)

33mm1 -5/16”)

129mm(5 -1/16”)

Monopoint - Spotlights

The Claro MR-16 Spotlight combines design excellence with precision engineering. Oil-Rubbed Bronze finish (BRZ). Accomodates one (1) media. Claro features excellent beam control with the use of Media.

Claro-BRZ(Claro-BRZ)

The Tiro MR-16 Spotlight with Short Glare Shield. Oil-Rubbed Bronze finish (BRZ). Clean modular design with classic appeal. Accommodates one (1) Media (photo shows Media Holder 2-16).

Tiro-with Short Glare Shield (TIRO-SGS-BRZ)

146mm(5 -3/4”)

64mm(2 -1/2”)

ø57mm(2.25”)

114mm(4.5”)114mm(4 -1/2”)

ø57mm(2 -1/4”)

Monopoint Systems Monopoints - Oil Rubbed Bronze Finish

415-504-3536

415-504-3536 TG23 3/6/19 • • teganlighting.com 4info@teganlighting.com •

The Tiro MR-16 Spotlight with hand blown White Frit Glass Shield. Oil-Rubbed Bronze finish (BRZ). Clean modular design with classic appeal.

Tiro-with Frit Glass Shield (TIRO-FGS-BRZ)

157mm(6 -5/16”)

65mm(2 -1/2”)

Monopoint - Spotlights

Field cuttable Connector Spot Extension will attach to any system to extend the Spot 72” (1.8m) from the System Connector. Specify with the appropriate system connector (not re-quired with Monopoints). Oil Rubbed Bronze (BRZ) finish. Can be cut to shorter lengths at the factory.

72” Spot Extension (SpotExt72-BRZ)

1.8m(72”)

The Universal Sloped Ceiling Adapter allows for angle adjustment of any spotlight when con-nected to a Monopoint installed on a sloped ceiling. Tilts 90º and rotates 350º. Available in Oil Rubbed Bronze (BRZ) finish.

Universal Sloped Ceiling Adapter (USCA-BRZ)

ø16mm(5/8”)

57mm(2 -1/4”)

The Monopoint Decorative Cover can be used with the MPRTL-RP-BRZ when it cannot be plas-tered properly. Available in Oil Rubbed Bronze (BRZ) finish.

Monopoint Decorative Cover(MPDC-BRZ)

Monopoint - Accessories

The Monopoint Plug can be used with any of our Monopoints, except MPS - IT, when not in use, to cover the Twist & Click System. Keeps the connection clean during rough construction phase. Available in Oil Rubbed Bronze (BRZ) finish.

Monopoint Plug(MP-BRZ)

ø62

5

ø19

6

ø62

5

ø19mm(3/4”)

6mm(1/4”)

ø62

5

ø19

6

ø62

55mm(3/16”)

ø62mm(2 -7/16”)

ø50mm(2 -1/8”)

Can accommodate up to two Media. 1/8” Hexcell black metal. Controls spill illumination and glare. Creates a symmetrical broadening of the lamp beam.

ø50mm(2 -1/8”)

ø50mm(2 -1/8”)

Claro/Tiro Media Holder 2-16(CMH2-16-AL)

Claro/Tiro Honeycomb Louver 16 (CHCLB-16)

Claro/Tiro Prismatic Lens 16 (CPL-16)

ø57

11

ø57mm(2 -1/4”)

11mm(7/16”)

Spotlight - Accessories

Monopoint Systems Monopoints - Oil Rubbed Bronze Finish

415-504-3536

415-504-3536 TG23 3/6/19 • • teganlighting.com 5info@teganlighting.com •

Creates an uniform beam pattern that is useful for wall washing. Will extend the lamp’s beam along one axis, allowing hightlight-ing of wider areas from a single fixture.

Smooths and widens irregular beam pattern.

ø50mm(2 -1/8”)

ø50mm(2 -1/8”)

Claro/Tiro Sandblasted Lens 16 (CSBL-16)

Claro/Tiro Linear Spread Lens 16 (CLSL-16)

Claro/Tiro Softening Lens 16(CSFL-16)

Tempered glass with a stipple effect that that provides obscurity while retaining high transmission values. This low-iron optically clear glass offers maximum transmission and minimal absorp-tion.

ø50mm(2 -1/8”)

Claro Solite Lens 16 (CSOL50-16)

Spotlight - Accessories

ø50mm(2 -1/8”)