M O L D R E M E D I A T I O N

L E A D A B A T E M E N T

A S B E S T O S A B A T E M E N T

D I S A S T E R R E S T O R A T I O N

M O B I L E C O N T A I N M E N T

In 2016 Fiberlock Technologies became a part of ICP Construction, an innovative manufacturer of quality paints, coatings, and remediation solutions for the architectural and building industries. Innovative Chemical Products (ICP) Group has three divisions, one of which is the Construction division, and Fiberlock Technologies is a preeminent brand within the ICP Construction family.

A b o u t F i b e r l o c k

Architectural coatings, sports surfaces coatings,

and niche building products

Low pressure foam adhesives and sealants

for roofing, construction, insulation, and other

applications

Line-applied clear coatings for packaging,

print, and other specialty applications

W h o I s I C P C o n s t r u c t i o n ?

For over 35 years, Fiberlock Technologies has been the leading manufacturer of products used to address environmental, safety and health hazards. Founded on the core beliefs that superior quality, definitive science and enduring service are the keys to corporate success, Fiberlock has grown to become one of the most respected names in the abatement and remediation industry.

From asbestos, lead or mold to disaster restoration and dust control Fiberlock has the expertise, insight and product to help you get the job done quickly, effectively and economically. Whatever requirements you may have turn to the leader. Turn to Fiberlock.

T a b l e o f C o n t e n t sMOLD PRODUCTS Cleaners and Stain Removers . . . . . . . 5-6,8 Advanced Peroxide Cleaner HydroBoost & HydroBrite IAQ 1000 Instant Mold Stain Remover Disinfectants and Sanitizers . . . . . . . . 3-4,7-8 ShockWave & ShockWave RTU ShockWave Hydrogen Peroxide IAQ 2000 & IAQ 2500 Fungicidal Coatings . . . . . . . . . . . . . . . . . . . 9 AfterShock Mold Resistant Coatings . . . . . . . . . . . .10-11 IAQ 6000 Series IAQ 6000 GEN3 IAQ 6000HD IAQ 6040 Primers & Sealers . . . . . . . . . . . . . . . . . . . . 12 IAQ 3000 IAQ 4000 IAQ 5000 HVAC Coatings . . . . . . . . . . . . . . . . . . .13-14 IAQ 7000 Series IAQ 8000 Series Mold Resistant Waterproofers . . . . . . . . . . 15 IAQ 9000

LEAD ABATEMENT Encapsulants . . . . . . . . . . . . . . . . . . . . .17-20 LBC ChildGuard Cleaners & Wipes . . . . . . . . . . . . . . . . . . . . 21 LeadSafe Dust Cleaner LeadSafe Dust Wipes Lockdowns . . . . . . . . . . . . . . . . . . . . . . . . . 22 Lead Shield

PAINT REMOVERS Paint Removers . . . . . . . . . . . . . . . . . . . .23-29 NexStrip NexStrip Pro NexStrip 8 Piranha 2 Piranha 4 Piranha 8 Accessories . . . . . . . . . . . . . . . . . . . . . . . . 30 Piranha Paper Piranha Neutralizer

ASBESTOS ABATEMENT Encapsulants . . . . . . . . . . . . . . . . . . . . .31-34 ABC ABC Fiberspray TBC Wetting Agents . . . . . . . . . . . . . . . . . . . . . . 35 Penewet Lockdowns . . . . . . . . . . . . . . . . . . . . . . . . . 36 Fiberset PM Thermal Insulation Repair . . . . . . . . . . .37-39 Lag Kote Lag Kote II Lag Kloth Decontamination Shower . . . . . . . . . . . . . 40

SERPI ABATEMENT Asbestos Abatement . . . . . . . . . . . . . . .41-43 SerpiFlex SerpiMastic Wet Wrap ‘N’ Seal Lead Abatement . . . . . . . . . . . . . . . . . . . . 44 Barrier Coat II

INDUSTRIAL COATINGS Primers, Sealers & Rust Inhibitors . . . . . .45-48 Power Block Powerstone Plus Power Rust Stop Grip-Tack

DISASTER RESTORATION Restoration Coatings . . . . . . . . . . . . . . .49-52 Smoke Odor Sealer ULTRA Smoke Odor Sealer Odor Counteractants . . . . . . . . . . . . . . . . 53 Extreme Duty Odor Counteractant Cleaners . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Citrus Solvent Cleaner Heavy Duty Cleaner Extreme Duty Cleaner

MOBILE CONTAINMENT Containment Units . . . . . . . . . . . . . . . . .55-60 Kontrol Kube HardPanel Unit Kontrol Kube Advanced Unit Kontrol Kube TopSider Unit Accessories . . . . . . . . . . . . . . . . . . . . . .61-62 Negative Air Machine & Filters AirBase

PRODUCT REFERENCE GUIDES Reference Guides . . . . . . . . . . . . . . . . .63-70 CapabilitiesManufacturing Facility . . . . . . . . . . . . . . . . . 71Distribution . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

For more than a decade, Fiberlock IAQ products have provided restoration professionals with proven results and the broadest array of cleaning, disinfecting and coating solutions available.

Fiberlock’s IAQ line offers:

M o l d P r o d u c t s

• EPA registered Disinfectants & Sanitizers• EPA registered Fungicidal Coatings• Mold Resistant Coatings*

• Mold Resistant Waterproofers*• Stain Blocking & Corrosion Inhibiting Primers

• Advanced Surface Cleaners & Stain Removers• HVAC Repair Coatings/Resurfacing Materials

With thirty years of formulation expertise in the manufacture of environmental bioscience products and extensive independent laboratory testing, Fiberlock delivers confidence and performance in every Fiberlock IAQ product that we produce.

*Resists mold growth on the dry coating surface only1

M

old

Pr

od

uc

ts

2

M

old

Pr

od

uc

ts

ShockWave Concentrate is Fiberlock’s signature EPA registered antimicrobial disinfectant, sanitizer and cleaner. For over a decade, remediation professionals have made ShockWave the industry’s leading product for a host of restoration challenges including mold remediation, water & fire damage restoration, crime scene/bio-recovery, and catastrophe preparedness and response. Whether employed in residential mold mitigation, or deployed by contractors and organizations after hurricanes and floods, ShockWave is recognized as the dominant disinfectant/sanitizer within the restoration and remediation industries.

ShockWave is a powerful concentrated quaternary ammonium chloride blend that yields up to 64 gallons of usable product from every gallon of concentrate. ShockWave has over 130 organism kill claims including Aspergillus niger, Penecillium spinulosum, Cryptococcus neoformans, E. coli, MRSA, Norovirus, Salmonella, HIV, Hepatitis-B, Herpes, Poliovirus, and many other pathogenic and environmental microbial organisms.

• E c o n o m i c a l c o n c e n t r a t e d f o r m u l a

• E f f e c t i v e i n 9 8 % s o i l l o a d

• O v e r 1 3 0 o r g a n i s m k i l l c l a i m s

• R e m a i n s e f f e c t i v e i n u p t o 7 9 1 p p m h a r d w a t e r

• E P A r e g i s t e r e d a s a s a n i t i z e r f o r w a t e r d a m a g e r e s t o r a t i o n a g a i n s t o d o r c a u s i n g b a c t e r i a a n d f u n g i

• E P A r e g i s t e r e d f o r u s e o n p o r o u s a n d n o n - p o r o u s m a t e r i a l

EPA registered disinfectant, sanitizer and cleaner

S h o c k W a v e

3

D

isin

fe

ct

an

ts

ShockWave RTU being applied to wood framing

• C o n v e n i e n t r e a d y - t o - u s e f o r m u l a

• H e l p s e l i m i n a t e t h e p o t e n t i a l f o r m i x i n g e r r o r s

• I d e a l f o r s i t u a t i o n s w h e n c l e a n w a t e r i s n o t a v a i l a b l e

• E P A r e g i s t e r e d a s a s a n i t i z e r f o r w a t e r d a m a g e r e s t o r a t i o n a g a i n s t o d o r c a u s i n g b a c t e r i a a n d f u n g i

• E P A r e g i s t e r e d f o r u s e o n p o r o u s a n d n o n - p o r o u s m a t e r i a l

S h o c k W a v e R T UThe most versatile ready-to-use disinfectant available

When time is critical and your reputation is on the line you need the right tools to handle the situation quickly, easily and effectively. ShockWave RTU is the only tool you will need for water damage restoration, sewage cleanup, mold remediation, disinfection, porous surface sanitization, and deodorizing.

ShockWave RTU is designed to handle any situation a remediation professional might encounter. ShockWave RTU has been formulated, tested, and is registered by the EPA for use on more surfaces, in more situations, and to kill more organisms than any other ready-to-use product available in the restoration and remediation industry.

4

D

isin

fe

ct

an

ts

‡For the cleaning and removal of mold stains, dirt and inanimate particulate. No claim is made by thisproduct to prevent, destroy, repel or mitigate any living organism.

Advanced Peroxide Cleaner’s high foaming action helps lift and remove mold stains

• D y e a n d p e r f u m e f r e e

• D e e p p e n e t r a t i n g s t a i n l i f t i n g a c t i o n

• P r o v i d e s m a x i m u m l a b o r s a v i n g s

• N o t D O T r e g u l a t e d

A revolutionary mold stain cleaner for the restoration professional‡

A d v a n c e d P e r o x i d e C l e a n e r

The leader in advanced cleaners and coatings, Fiberlock Technologies has introduced a revolutionary new hydrogen peroxide based cleaner. Advanced Peroxide Cleaner is created using innovative chemistry and a unique manufacturing process.

The proprietary formulation releases the maximum oxidation potential of Fiberlock’s Advanced Peroxide Cleaner. This allows for a lower concentration product that is not DOT regulated. The end result is a product that provides performance unmatched by any other peroxide based cleaners.

5

H

yd

ro

ge

n P

er

ox

ide

Cle

an

er

s

‡For the cleaning and removal of mold stains, dirt and inanimate particulate. No claim is made by theseproducts to prevent, destroy, repel or mitigate any living organism.

Before and after: APC with HydroBoost used to clean bluestone.

Before and after: APC with HydroBrite used to clean mold stained plywood.

H y d r o B o o s t : B o o s t e r

HydroBoost is an additive specifically designed to magnify the cleaning and stain removing power of Advanced Peroxide Cleaner (APC). Ideal for situations that demand extreme cleaning and powerful stain removal, HydroBoost works by instantly increasing the oxidation potential of Advanced Peroxide Cleaner‡.

• E x t r a c l e a n i n g p o w e r

• E x t r a s t a i n l i f t i n g p o w e r

• E x t r a s t a i n r e m o v i n g p o w e r

• E x t r a l a b o r s a v i n g s

H y d r o B r i t e : B r i g h t e n e r

HydroBrite is a powder based additive for Fiberlock’s IAQ Advanced Peroxide Cleaner (APC). HydroBrite is the first adjustable stain remover designed to remove stains from mold and mildew to help restore a substrate to its original look‡.

• A d j u s t a b l e s t a i n r e m o v i n g p o w e r

• A t t a c k s t h e t o u g h e s t s t a i n s

• I d e a l f o r O S B , p l y w o o d , w o o d f r a m i n g & c o n c r e t e

A d d i t i v e s f o r A P C

6

H

yd

ro

ge

n P

er

ox

ide

Cle

an

er

s

ShockWave Hydrogen Peroxide is available in Canada*

• Category IV (Lowest EPA toxicity category)

• Cleaner, disinfectant, and broad spectrum sanitizer

• Tuberculocidal

• No PPE required

• Fragrance and dye free

Category IV Disinfectant - For situations that call for a delicate solution

S h o c k W a v e H y d r o g e n P e r o x i d eD i s i n f e c t a n t & C l e a n e r

ShockWave Hydrogen Peroxide Disinfectant & Cleaner is a broad spectrum category IV disinfectant and cleaner. ShockWave Hydrogen Peroxide Disinfectant & Cleaner is ideal for use in all restoration and remediation applications: mold remediation, water damage restoration and biohazard decontamination.

ShockWave Hydrogen Peroxide Disinfectant & Cleaner is a one-step hospital-use germicidal disinfectant cleaner and odor neutralizer designed for general cleaning and disinfecting of hard, non-porous environmental surfaces. It cleans quickly by removing dirt, grime, mold, mildew, and other common soils found in hospitals, nursing homes, schools and colleges, medical, dental offices, and life science laboratories.

*See Canadian label for complete instructions7

C

at

eg

or

y I

V D

isin

fe

ct

an

ts

‡For the cleaning and removal of mold stains, dirt and inanimate particulate. No claim is made by thisproduct to prevent, destroy, repel or mitigate any living organism.

IAQ 1000 | A ready-to-use hydrogen peroxide based mold stain remover. IAQ 1000 is pH-neutral, and contains an agent that will whiten and brighten stained surfaces, but does not contain sodium hypochlorite (bleach). IAQ 1000 is suitable for use on water damage restoration projects to remove stains from mold and mildew‡.

MOLD STAIN REMOVERS

Instant Mold Stain Remover | An aggressive stain remover designed to clean stains from mold and mildew within minutes of application. The proprietary formulation instantly targets deeply embedded mold stains, which saves the applicator time and labor. Works on wood and concrete substrates. Ideally suited to mold stained attic sheathing and basement areas.

IAQ 2000 | An EPA registered concentrated disinfectant and cleaner designed to kill fungal, bacterial, and virucidal growth. When used as directed, IAQ 2000 disinfects hard, nonporous, inanimate, environmental surfaces, including floors and walls, that are prone to problems caused by microorganisms.

DISINFECTANTS

IAQ 2500 | A ready-to-use, EPA registered, non-acid cleaner and disinfectant for use in homes, schools, office buildings, and retail businesses. Efficacy tests have demonstrated that Fiberlock IAQ 2500 is an effective bactericide, fungicide, tuberculocide and virucide, in the presence of organic soil (5% blood serum).

8

C

lea

ne

rs

& D

isin

fe

ct

an

ts

AfterShock applied to wood studs.

• E P A r e g i s t e r e d f u n g i c i d a l c o a t i n g

• K i l l s a n d p r e v e n t s m o l d a n d m i l d e w

The first coating to kill and prevent mold

A f t e r S h o c k

AfterShock is a white, EPA registered, antimicrobial coating designed to kill residual mold and mildew remaining after pre-cleaning/disinfecting contaminated surfaces. AfterShock also inhibits the future growth and spread of mold and mildew on the cured film surface in residential and institutional buildings. This extremely durable, easy to apply, 100% acrylic sealant offers the ultimate combination of durability, application ease and fungal-resistance to address mold growth in nearly any situation.

AfterShock is recommended for use on interior wall surfaces such as plaster, wallboard, drywall, concrete, masonry block, wood, primed metal and galvanized metal. AfterShock is also recommended for use on interior wood framing, primed metal, concrete, and wallboard inside wall cavities. Not for use in HVAC system applications.

9

F

un

gic

ida

l C

oa

tin

gs

The IAQ 6000 Series of mold resistant coatings are extremely durable coatings developed to resist mold growth.* These easy to apply, 100% acrylic coatings are available in white (IAQ 6000), clear (IAQ 6100) and black (IAQ 6500). All IAQ 6000 Series coatings contain a fungistatic agent to resist mold growth on the dry coating surface.

The IAQ 6000 Series of coatings are recommended for use on plaster, wallboard, sheetrock, concrete, masonry block, wood, primed metal and galvanized metal.

Before and after: IAQ 6100 applied to an attic in Cape May, NJ.

I A Q 6 0 0 0 S e r i e sWhite, Clear & BlackA trusted coating for every situation

• T e s t e d b y i n d e p e n d e n t l a b o r a t o r i e s

• M o l d r e s i s t a n t *

• T i n t a b l e f o r m u l a ( w h i t e v e r s i o n o n l y )

*Resistant to mold growth on the dry coating surface only 1 0

M

old

Re

sis

ta

nt

Co

at

ing

s

IAQ 6000 GEN3 | A next generation 50 state VOC compliant product that is formulated with a unique fungistatic agent to resist mold growth on the dry coating surface. IAQ 6000 GEN3 is a white, tintable and durable 100% acrylic water based coating for professional use. IAQ 6000 GEN3 has successfully passed ASTM G-21 mold resistance testing with the highest possible score. IAQ 6000 GEN3 is recommended for use on wood, plaster, wallboard, sheetrock, concrete, masonry block, primed metal and galvanized metal.

*Resists mold growth on the dry coating surface only

IAQ 6040 | A low-viscosity, translucent violet, mold resistant sealant designed for use on new construction materials.* This specially formulated, water based coating contains a fungistatic agent to resist mold growth on the dry coating surface. The low-viscosity 100% acrylic formula is easy to apply, and the translucent finish will not block the appearance of coated building materials. IAQ 6040 can be applied to wood, OSB, wallboard, concrete and other construction materials.

IAQ 6000HD | A white, tintable, high-build coating for use during new building construction which resists mold growth. IAQ 6000HD contains a fungistatic agent to resist mold growth on the dry coating surface. IAQ 6000HD is a durable and flexible 100% acrylic water based flat coating. IAQ 6000HD is designed for use on non-porous and semi-porous building materials including gypsum wallboard, oriented-strand board (OSB), wood framing timbers, plywood, masonry block, and many other structural surfaces where a flexible, high-build mold resistant coating is necessary.

NEXT GENERATION MOLD RESISTANT COATING*

HEAVY DUTY MOLD RESISTANT COATING*

MOLD RESISTANT SEALANT*

M

old

Re

sis

ta

nt

Co

at

ing

s

1 1

IAQ 3000 | A high quality, white, interior and exterior block filler formulated to fill small imperfections and pinholes in masonry block and porous concrete before top coating. IAQ 3000 contains mineral type fillers and fine mineral aggregates that fill voids in masonry surfaces. This 100% acrylic block filler is easy to apply, alkali resistant and provides a uniform surface capable of receiving all types of finish coats. IAQ 3000 is ideal for application to masonry block, concrete, brick and stone. IAQ 3000 is not water sensitive after application and its flexibility and durability are the best available for a block filler, far superior to cementitious and PVA type formulations.

IAQ 4000 | A white, rust inhibiting, 100% acrylic latex metal coating for use on ferrous metal, galvanized metal and other surfaces exposed to general industrial and atmospheric conditions. IAQ 4000 has excellent water resistance and excellent resistance to most alkalis, detergents and mild acids. IAQ 4000 is ideal for both new and previously coated roof decks, metal paneling, structural steel, corrugated metal siding, and miscellaneous iron and bar joists.

IAQ 5000 | A white, quick drying, high performance 100% acrylic latex coating specifically designed to prime stained or water damaged surfaces. IAQ 5000 provides exceptional adhesion and stain blocking properties and may be used on interior or exterior surfaces to prevent most bleeding type stains, seal porous surfaces and provide adhesion to hard and glossy surfaces. IAQ 5000 also contains a fungistatic agent to resist mold growth on the coating surface. IAQ 5000 provides maximum breathability, adhesion, and holdout to prolong the life of the finish. IAQ 5000 is recommended for use on wallboard, plaster, sheetrock, masonry, wood, concrete, aluminum, and galvanized metal.

PRIMERS AND SEALERS

1 2

P

rim

er

s &

Se

ale

rs

Before and after: IAQ 7000 applied to metal duct work.

• M e e t s N F P A 9 0 A / 9 0 B

• P e n e t r a t i n g c o a t i n g f o r l i n e d d u c t w o r k

• L o c k d o w n f o r i n a n i m a t e p a r t i c u l a t e c o n t a m i n a t i o n

Penetrating HVAC sealants for customers who demand the best, available in white and clear

I A Q 7 0 0 0 S e r i e s

The IAQ 7000 Series of HVAC sealants are durable, flexible and moisture resistant penetrating coatings for duct insulation that increase airflow while minimizing dust buildup in HVAC systems. Available in white (IAQ 7000) and clear (IAQ 7500).

The IAQ 7000 Series contains a fungistatic agent to resist mold growth on the coating surface. Manufactured from premium acrylic resins, the IAQ 7000 Series allow for optimal durability and flexibility and can be used in residential, commercial, or industrial facilities. The IAQ 7000 Series is acceptable for use over faced or unfaced fiberglass duct liner insulation, unfaced fiberglass duct board insulation and can be used in unlined duct work. The IAQ 7000 Series can also be used as a post-cleaning lockdown of inanimate residual particulates such as, fiberglass, dust, and dirt.

1 3

H

VA

C C

oa

tin

gs

Before and after: IAQ 8500 applied to fiberglass insulation in duct work.

• M e e t s N F P A 9 0 A / 9 0 B

• R e s u r f a c e s a n d e n c a p s u l a t e s f i b e r g l a s s l i n e d d u c t w o r k

• Resists mold growth*

I A Q 8 0 0 0 S e r i e sHigh build HVAC sealants, available in white and black

*Resists mold growth on the dry coating surface only

The IAQ 8000 Series of HVAC sealants are high performance coatings for use in duct work. These high-build coatings are designed to bridge and reinforce duct liner or duct board insulation materials. The IAQ 8000 Series can also be used to seal unlined duct work prior to component removal, preventing fiberglass and inanimate particulate from becoming airborne. Available in white (IAQ 8000) and black (IAQ 8500).

The IAQ 8000 Series dries to form a durable, flexible, moisture-resistant protective coating with a semi-gloss finish that minimizes dust buildup on the coating surface. The high viscosity provides maximum bridging ability on insulation materials and reduces sagging and dripping when applied to the vertical and top surfaces of unlined duct.

1 4

H

VA

C C

oa

tin

gs

Before and after: IAQ 9000 applied to the interior side of a cinderblock basement foundation wall.

I A Q 9 0 0 0Mold Resistant Masonry Waterproofer*

IAQ 9000 is a white waterproofing coating that is specially formulated to stop water from penetrating through a variety of interior and exterior surfaces including above or below grade masonry walls, cinder and concrete blocks, stucco, brick, retaining walls, basements, and foundations. This latex based formula stops 10 psi of water pressure (greater than a wall of water 22 feet high). IAQ 9000 contains a fungistatic agent to resist mold growth on the surface of the coating. This fast-drying formula may be applied with a brush and/or roller on dry surfaces and cleans up easily with soap and water.

• H o l d s b a c k 1 0 p s i o f w a t e r p r e s s u r e

• L a t e x b a s e d f o r m u l a t i o n

• T i n t a b l e

*Resists mold growth on the coating surface only1 5

M

old

Re

sis

ta

nt

Wa

te

rp

ro

of

er

s

Hurricane Katrina: 2005

Hurricane Ike: 2008 Hurricane Sandy: 2012

Hurricane Rita: 2005

W h e n D i s a s t e r s S t r i k eFiberlock Technologies prides itself on providing assistance in the wake of natural disasters. As a leading manufacturer of disaster recovery products, Fiberlock understands the impact of these disasters and works closely with the public and private sectors to help optimize cleanup efforts. Fiberlock products have been used extensively during recovery efforts in the aftermath of major storms and hurricanes, including: Hurricane Katrina, Rita, Ike, Irene, Sandy and Tropical Storm Lee.

1 6

M

old

Re

me

dia

tio

n P

ro

du

ct

s

Childhood lead poisoning has been designated the number one environmental health threat to American children under the age of six, and lead-based paint is the most significant source of lead exposure today. The U.S. Department of Housing and Urban Development has stated: “Fully 90 percent of privately owned [housing] units built before 1940, 80 percent of units built between 1940 and 1959, and 62 percent of units built between 1960 and 1979 contain some lead-based paint.” This environmental hazard often cannot be removed safely or cost effectively. Encapsulation of lead-based paint using approved products is a recognized method of abatement with over 20 years of proven results. This method eliminates the costly and labor intensive practice of mechanical removal. If removal must occur, chemical methods can remove lead paint without generating hazardous dust and debris.

Fiberlock’s line of lead abatement products help address many of the complex challenges involved with the abatement process. From permanent encapsulation with LBC Lead Barrier Compound, to complete removal utilizing one of our Piranha advanced paint removers, Fiberlock has everything you need. In addition, Fiberlock offers LeadSafe Wipes and LeadSafe Cleaner for the safe and effective clean up of lead dust.

L e a d A b a t e m e n t P r o d u c t s

1 7

L

ea

d A

ba

te

me

nt

Pr

od

uc

ts

N a t i o n a l G a l l e r y o f A r t u s e s L B CThe National Gallery of Art in Washington, DC is one of the country’s most distinguished museums that houses some of the finest paintings, sculptures and graphic arts.

In 1996, a major renovation project that required large-scale decontamination work was undertaken. The entire skylight system in the museum’s attic was replaced. After the skylights were removed and replaced, it quickly became apparent that the surrounding area in the attic was in poor condition, including chipping paint and rust. The area was also found to be contaminated with lead-based paint.

Over 200,000 square feet of walls, ceilings, windows, skylights and steel support beams for the skylight system in the attic needed to be abated. Because of the unique style of construction and intricate architecture within the museum’s attic, a cost-effective and simple solution for abatement had to be found.

Since the National Gallery of Art wanted the safest, fastest, and most economical solution available, encapsulation was found to be the only practical method of abatement for the museum’s requirements. The abatement contractor in charge of the job chose LBC. It was selected because it meets all ASTM standards, is UL classified and has been independently tested and certified by an accredited laboratory. There were also strict color requirements that needed to be met by the gallery and LBC was able to be custom matched to meet these standards.

Fiberlock recently visited the National Gallery of Art where LBC was applied over 15 years ago and it is still standing strong today.

A view from inside the museum with skylights overhead A view from inside the attic after LBC was applied

1 8

L

ea

d A

ba

te

me

nt

Pr

od

uc

ts

LBC - Lead Barrier Compound

• F o r u s e i n a l l 5 0 s t a t e s

• U L C l a s s i f i e d

• C l a s s A f i r e r a t e d

• P e r m a n e n t l e a d a b a t e m e n t s o l u t i o n

• C o n t a i n s a b i t t e r t a s t i n g a n t i - i n g e s t a n t

Available for the consumer in convenient one gallon cans, ChildGuard is a safe and effective alternative to the costly process of lead-based paint removal and offers the same great features and benefits as LBC.

C h i l d G u a r dConsumer Lead Encapsulant Paint

LBC Lead Barrier Compound (Type III - Interior/Exterior) is a thermoplastic-elastomeric water based copolymer blended specifically to form a barrier between lead-based paint and the environment. It is a high-solids coating formulated to offer unparalleled coverage, economics and aesthetics while preserving historic and architectural detail. LBC contains Bitrex®, a bitter-tasting ingredient to discourage oral contact with lead paint. LBC complies with all EPA and HUD requirements for lead-based paint encapsulants and is recognized as a permanent method for abatement of lead-based paint. LBC meets all Federal, State and Local standards for lead-based paint encapsulants. LBC has been independently tested and was found to meet and surpass the ASTM E-1795 Standard for Lead-Based Paint Encapsulants for both indoor and outdoor use.

Professional Lead Encapsulant

1 9

L

ea

d E

nc

ap

su

lan

ts

Before and after: LBC (tinted) applied to the Las Vegas Academy High School

A p p r o v a l s & C e r t i f i c a t i o n sFEDERAL ACCEPTANCE

• Environmental Protection Agency (EPA)• Meets or exceeds all ASTM tests - Standard E-1795• Department of Defense (DOD) Specified• Department of Justice Specified• Meets all OSHA standards• Housing and Urban Development (HUD) Specified• U.S. Army (USA), U.S. Navy (USN), U.S. Marine Corps (USMC), U.S. Air

Force (USAF), and U.S. Coast Guard (USCG) Specified• U.S. Army Corps of Engineers (ACOE) Specified, UFGS-02 83 19.00

10; formerly Section 13281A• Approved for use in all 50 states

STATE AND MUNICIPAL CERTIFICATION• Colorado Certified-Department of Public Health and Environment

approved pursuant to Colorado Regulation No.19, Section V.G.4• Connecticut Certified-Department of Public Health per section

19A-111c of Chapter 368A of the General Statute• Maryland Certified-Reference Maryland Department of the

Environment Approval List• Massachusetts Certified-Department of Public Health, Childhood

Lead Poisoning Prevention Program-Reference DL#12608 (DL Labs, NY-Accredited by the National Institute of Standards & Technology [NIST] for coatings and sealants)

• Michigan - Approved Michigan Department of Community Health, R 325-99406(10) Lead Hazard Control

• Minnesota Certified-Department of Health Permit No. E-99-4• New Hampshire Acceptable Lead Encapsulants List, NH

Department of Health and Human Services, He-P 1605.09• New York State Dept. of Public Health Acceptable Encapsulant

Products List; New York City Accepted Reference MEA #309 94-M Accepted for use per section 173.14 of the NYC Health Code - NYCDOH or NYHPD approval required when cited

• Ohio Approved pursuant to 3742.03(K) of the Ohio Administrative Code

LABORATORY PRODUCT TESTING• LBC Lead Barrier Compound is Underwriters Laboratories (UL®)

Classified, UL723, ASTM E84 • Class A Fire Rated, Flame Spread 0, Smoke Development 0• Independently Certified for ASTM-E-1795 tests:

- E84-97a, Surface Burn Characteristics for Building Materials - D3273, Mildew and Fungus Resistance - D2370, Strength Test - D1653, Method A Water Vapor Transmission - G53, Accelerated Weathering/Aging - D3359, Adhesion Tape Test - D4060, Dry Abrasion (Taber Abrasion) - D2486, Wet Abrasion (Scrub) - D2794, Impact Resistance - D3359, Paintability - D522, Elongation/Flex (Mandrel Bend) - D1308, Water and Chemical Resistance - D3960, Volatile Organic Compound Content - D4214, Chalking - EPA Method 24 VOS/VOC content

• UPITT-Combustion Toxicity (Method for Fire Gas Toxicity)

2 0

L

ea

d E

nc

ap

su

lan

ts

LeadSafe Lead Dust Cleaner is a concentrated product designed specifically to assist in the cleanup of lead dust after lead abatement projects, construction, renovation or any other activity which disturbs lead and creates dust. This product has been formulated to remove more lead dust than ordinary cleaning products. LeadSafe Cleaner utilizes chelating agents similar to those given to individuals with lead poisoning. These chelating agents bind to the lead dust and help hold it in suspension so that it can be easily rinsed away.

• C o n t a i n s a c t i v e c h e l a t i n g a g e n t s

• F a s t e r c l e a n u p a n d c o m p l i a n c e

L e a d S a f eL e a d D u s t C l e a n e r

LeadSafe Lead Dust Wipes are conveniently packaged towelettes presoaked in a trisodium phosphate (TSP) solution to aid in surface preparation and cleaning for the quick removal of harmful lead dust. LeadSafe Wipes are ideal for use before and after any lead abatement project and are a critical part of a conscientious program for the Interim Control of lead-based paint dust hazards. LeadSafe Wipes meet all Federal, State, HUD and EPA guidelines for cleaning and removing lead dust.

L e a d S a f eL e a d D u s t W i p e s

Designed to remove harmful lead dust

2 1

L

ea

d C

lea

ne

rs

an

d W

ipe

s

Lead Shield Clear applied to brick after the removal of lead-based paint.

L e a d S h i e l dLockdown residual lead-based paint and dust present after removal

• F o r i n t e r i o r a n d e x t e r i o r a p p l i c a t i o n s *

• E l i m i n a t e s t h e n e e d f o r s a n d i n g a n d p r i m i n g o n m o s t s u r f a c e s

*For exterior applications, LeadShield must be topcoated with an exterior grade acrylic coating.

Lead Shield is a water based 100% acrylic lockdown with a dual purpose; it binds residual lead-based paint (LBP) and dust present after removal; and accepts most topical coverings. Lead Shield is a one-step product which bonds to most surfaces eliminating the need for sanding, priming and sizing recently stripped walls. Lead Shield can be used on both interior and exterior surfaces, and was expressly formulated to prepare these surfaces to accept a final topical covering. Lead Shield should not be used as a substitute for encapsulation.

The clear version of this product sprays on white and dries clear to permit visual inspection of any residual paint. Lead Shield is also available in translucent blue which speeds up the post removal inspection process. The blue tint enables an inspector to quickly identify areas that LBP has been removed from and subsequently locked down. These unique features assist in obtaining final LBP removal certification.

2 2

L

ea

d L

oc

kd

ow

ns

P i r a n h a P a i n t R e m o v e r sFiberlock’s Piranha Paint Strippers are specifically engineered to remove nearly any coating system from most substrates. From solvent gels to caustic pastes, Piranha professional paint strippers are the paint strippers of choice for the most effective coating removal.

2 3

P

ain

t R

em

ov

al

Pr

od

uc

ts

Piranha NexStrip is ideally suited for use in hospitals or schools

P i r a n h a N e x S t r i pPaste Paint Stripper

Piranha NexStrip is the next generation water based paint and coating remover. The unique paste formulation clings to and tenaciously attacks multiple layers of almost any coating system.

Easy to work with and easy to clean up, Piranha NexStrip does not contain methylene chloride, methanol, chlorinated solvents, caustics or petroleum-based solvents. It can be used on interior and exterior surfaces including concrete, brick, stone, aluminum, wood, fiberglass, plastic and other surfaces.

• N o n - f l a m m a b l e

• R e m o v e s m u l t i p l e p a i n t l a y e r s

• M e t h y l e n e C h l o r i d e f r e e

• F o r i n t e r i o r o r e x t e r i o r u s e

• N o n e u t r a l i z a t i o n r e q u i r e d

2 4

P

ain

t R

em

ov

er

s

1: Painted concrete 2: Paste applied 3: Paper applied 4: Stripped concrete

P i r a n h a N e x S t r i p P r oMaximum Strength, Dual-Action Paste Paint Stripper

Piranha NexStrip Pro is the next generation water based, maximum strength paint and coating remover. Piranha NexStrip Pro contains our unique dual action stripping formula. The first stage begins by attacking the paint system on contact. The second stage penetrates into the paint system and delaminates it from underneath for complete paint removal. This unique paste formulation clings to and tenaciously attacks multiple layers of almost any coating system.

Easy to work with and easy to clean up, Piranha NexStrip Pro does not contain methylene chloride, methanol, chlorinated solvents, caustics or petroleum-based solvents. Piranha NexStrip Pro is non-flammable and can be used on interior and exterior surfaces.

• S u p e r s t r e n g t h d u a l - a c t i o n s t r i p p i n g f o r m u l a

• R e m o v e s t h e m o s t s t u b b o r n p a i n t s y s t e m s

• N o n - f l a m m a b l e

• M e t h y l e n e C h l o r i d e f r e e

• N o n e u t r a l i z a t i o n r e q u i r e d

2 5

P

ain

t R

em

ov

er

s

Red lead primer on steel stripped with Piranha NexStrip 8

P i r a n h a N e x S t r i p 8Extreme Duty Self Skinning Caustic Paint Remover

Piranha NexStrip 8 is a self skinning caustic paste paint stripper that can liquefy up to 30 layers of paint on a variety of substrates. Piranha NexStrip 8 has an easy-to-apply, buttery-smooth texture that makes application easy. Piranha NexStrip 8 removes most paints, varnishes, and latex paints from metal, stone, concrete, brick, wood and plaster.

Ideal for multi-layer paint systems, Piranha NexStrip 8 is particularly well suited for stripping lead-based paints (including red lead primer) from painted steel structures. Surfaces must be neutralized after using Piranha NexStrip 8.

• I d e a l f o r u s e o n r e d l e a d p r i m e r

• E x t r e m e d u t y s e l f s k i n n i n g c a u s t i c f o r m u l a

• A t t a c k s u p t o 3 0 l a y e r s o f p a i n t

2 6

P

ain

t R

em

ov

er

s

Multiple layers of paint stripped by Piranha 2

Piranha 2 is a heavy duty, fast acting paint remover for the professional. Utilizing the power of methylene chloride, Piranha 2 will attack multiple layers of paint in a single application. Piranha 2 will remove most oil and latex paints, varnishes, shellacs, lacquers and enamels. Piranha 2 is non-flammable and will not raise the grain of wood or corrode metals. This product does not require anti-evaporation paper like many caustics or other weaker solvent formulas.

• I n s t a n t l y a t t a c k s m u l t i p l e l a y e r s o f p a i n t

• D o e s n o t r a i s e t h e g r a i n o f w o o d

• R e m o v e s o i l a n d l a t e x p a i n t s , v a r n i s h , s h e l l a c s , l a c q u e r s a n d e n a m e l s

P i r a n h a 2Heavy Duty Paint Stripper

2 7

P

ain

t R

em

ov

er

s

Piranha 4 removing multiple layers of lead based paint from wood trim

P i r a n h a 4

Piranha 4 is a solvent-based gel formulated to remove multiple layers of paint. Piranha 4 starts removing most paints and stubborn coatings in less than one hour, without the use of chlorinated solvents, caustics or methylene chloride. The gel formulation yields maximum coverage per gallon and has excellent resistance to sagging, enabling it to cling to vertical and overhead surfaces. Piranha 4 has a very slow rate of evaporation keeping it active for hours.

Piranha 4 is a unique solvent formulation ideally suited for paint removal from historically significant architectural components since it does not discolor or raise wood grain or require neutralization. Piranha 4 can be used on virtually any substrate to remove oil-based paints, latex paints, elastomeric paints, cementitious asbestos paints, epoxies and urethanes.

• D o e s n o t c o n t a i n c h l o r i n a t e d s o l v e n t s , c a u s t i c s , o r m e t h y l e n e c h l o r i d e

• L o w e v a p o r a t i o n r a t e e x t e n d s a c t i v e p e r f o r m a n c e

• E x c e l l e n t r e s i s t a n c e t o s a g g i n g

• E x t r a o r d i n a r y c o v e r a g e r e d u c e s m a t e r i a l c o s t

Gel Paint Stripper

2 8

P

ain

t R

em

ov

er

s

Before and after: Piranha 8 was used to remove lead paint from the interior and exterior of the Historic Mound House in Fort Myers Beach, FL. LBC was then used as an encapsulant in all areas where the lead paint was removed.

P i r a n h a 8

Piranha 8 is an alkaline paste paint stripper that liquefies paints on a variety of substrates. Piranha 8 removes most paints, varnishes, polyurethanes, and water based latex paints from metal, stone, and concrete. Piranha 8 can remove multiple coats safely and easily in a single application. Piranha 8 is particularly well suited for stripping lead paints, including red lead primer from metals. Surfaces must be neutralized after using Piranha 8.

• A t t a c k s u p t o 3 0 l a y e r s o f p a i n t

• R e m o v e s o i l a n d l a t e x p a i n t s , v a r n i s h , s h e l l a c s , l a c q u e r s a n d e n a m e l s

Multi-Layer Paint and Varnish Remover

2 9

P

ain

t R

em

ov

er

s

P i r a n h a A c c e s s o r i e s

Piranha PaperPiranha paper is specifically designed to increase application dwell time for most Piranha and Piranha NexStrip Paint removers. Increased application dwell times can significantly enhance chemical paint removal by preventing the paint remover from evaporating and drying out prematurely. In addition, Piranha Paper helps to ensure direct contact between the Piranha paint remover and the underlying substrate. Available in either 13” x 300 ft. or 36” x 100 ft. rolls, Piranha Paper is easy to apply and cost effective.

Piranha NeutralizerPiranha Neutralizer is an easy to use neutralizing agent that must be applied after using Fiberlock’s Piranha 8 and Piranha NexStrip 8. Piranha Neutralizer is suitable for use on interior and exterior surfaces including concrete, brick, stone, metal, wood, fiberglass and other similar surfaces. Wood surfaces may darken after using Piranha 8 and Piranha NexStrip 8. Apply a solution of Piranha Neutralizer to help restore the natural color of wood surfaces.

3 0

P

ira

nh

a A

cc

es

so

rie

s

Fiberlock’s asbestos abatement products address nearly every type of asbestos containing material (ACM). Our industry leading asbestos abatement and thermal insulation repair products include penetrating encapsulants, bridging encapsulants, wetting agents, rewettable cloths and high temperature insulation repair products. Not only do our asbestos abatement products offer the superior quality and solid testing data that you expect from Fiberlock Technologies, they also offer a level of flexibility that few other products can match.

Due to the myriad of substrates on any given job, a combination of products and application techniques may be required. Products like ABC Asbestos Binding Compound and Lag-Kote are flexible tools for your abatement toolbox, while ABC Fiberspray offers a unique airless spray-can technology that makes working in glove bags or sealing core samples quick and easy.

A s b e s t o s A b a t e m e n t P r o d u c t s

3 1

A

sb

es

to

s A

ba

te

me

nt

Pr

od

uc

ts

3 2

A

sb

es

to

s A

ba

te

me

nt

Pr

od

uc

ts

ABC Green applied to asbestos containing fireproofing on structural steel beams

ABC Asbestos Binding Compound is a high solids asbestos encapsulant/sealant, designed to encapsulate friable Asbestos Containing Material (ACM) such as fireproofing and insulation material. ABC is an important tool for managing the health hazards associated with exposure to asbestos fibers. In 1978, ABC was tested for the EPA under contract #68-03-2552-T2005 by Battelle Laboratories of Columbus, Ohio, and found to meet the requirements for the effective encapsulation and removal of ACM. The high solids, non-flammable composition of ABC allows for dilution with water to provide maximum flexibility for specific asbestos abatement needs, including lockdown, removal, penetrating encapsulation and bridging encapsulation. ABC is also an effective tool for controlling the documented health hazard of exposure to asbestos fibers found present in soil.

A B CAsbestos Binding Compound

• E n c a p s u l a t e s f i r e p r o o f i n g a n d s o i l

• C l a s s A f i r e r a t e d

• E x c e e d s E P A s t a n d a r d s f o r e n c a p s u l a t i o n

• A v a i l a b l e i n o f f - w h i t e , c l e a r a n d g r e e n

ABC Fiberspray is the same great formula as ABC Asbestos Binding Compound, offered in a convenient “airless spray” can. ABC Fiberspray dispenses encapsulant from a unique 8 ounce bladder inside of the can. This CFC-free “airless spray” technology minimizes asbestos fiber release, and permits application of encapsulant in any position, even upside down.

A B C F i b e r s p r a y

• I d e a l f o r u s e i n s i d e g l o v e b a g s

• U n i q u e s p r a y i n g t e c h n o l o g y e n a b l e s a p p l i c a t i o n a t a n y a n g l e

3 3

A

sb

es

to

s E

nc

ap

su

lan

ts

The Puget Sound Naval Shipyard (PSNS): Bremerton, Washington. Building 460 was built in 1940-1941 and was used to repair and upgrade battleships during World War II. The exterior of Building 460, a total surface area of 178,000 sq.ft., consisted of cementitious structural siding panels that contained asbestos. The siding was chalking, powdery, and in some places, friable. TBC was one of three Fiberlock products used for a cost effective, permanent system of solutions for the challenges posed by the aged lead and asbestos containing exterior surfaces of the building.

T B C

TBC Transite Barrier Compound is a white, elastomeric thermoplastic water based copolymer, blended specifically to seal exterior asbestos containing Industrial Fiber Cement Board (Transite®). TBC is a high solids blend of resins that forms a hard yet flexible finish which is ultraviolet resistant and mildew resistant. It complies with all federal and state VOC requirements.

Specifically formulated for transite encapsulation

• U V & m o l d r e s i s t a n t *

• C l a s s A f i r e r a t e d

• H i g h s o l i d s f o r m u l a

• I n t e r i o r / E x t e r i o r

*Prevents mold on the surface of the dry coating only 3 4

A

sb

es

to

s E

nc

ap

su

lan

ts

P e n e w e tWetting agent & surfactant

Penewet is a ready-to-use, colorless wetting agent/surfactant solution incorporating advanced concepts in surface chemistry. It provides superior wetting, penetrating and coalescing of Asbestos Containing Material (ACM) to permit handling and removal of these materials under damp, dust-free conditions. Penewet is a non-flammable, water based liquid that will not corrode aluminum components of spray equipment.

• R e a d y t o u s e f o r m u l a

• S u r f a c e T e n s i o n : 2 7 d y n e s / c m

• S a t i s f i e s N E S H A P r e q u i r e m e n t s

• P e n e t r a t e s a n d “ w e t s o u t ” a s b e s t o s t o h e l p c r e a t e a d a m p , d u s t - f r e e e n v i r o n m e n t

3 5

W

et

tin

g A

ge

nt

s

Application of Fiberset PM

F i b e r s e t P M

Fiberset PM is a pre-mixed “lockdown” sealing treatment for microscopic residual fibers present after the removal of Asbestos Containing Material (ACM). Available in white, blue or clear, Fiberset PM is a ready-to-use, Class A fire rated coating that provides a flexible barrier over residual fibers to ensure final air clearance. Fiberset PM is UL® classified for use as a primer for fireproofing replacement materials under the “Encapsulant Materials” section of the UL directory, and is compatible with leading brands of flooring adhesives. Fiberset PM is a water based coating that employs advanced 100% acrylic resin technology to extend the life expectancy of airless spray equipment.

• U L c l a s s i f i e d

• C l a s s A f i r e r a t e d

• I d e a l f o r u s e a s a p u l l - d o w n

• C o m p a t i b l e w i t h m a n y f l o o r i n g a d h e s i v e s

UL classified post removal surface sealant

3 6

P

os

t R

em

ov

al L

oc

kd

ow

ns

Lag-Kote applied to asbestos pipe insulation

L a g - K o t e

Lag-Kote is a white, 100% acrylic, high solids encapsulant/sealant specifically formulated for application over a variety of Asbestos Containing Materials (ACM). Tested at Battelle Laboratories of Columbus, Ohio, under EPA Contract #08-03-2552-T2005, Lag-Kote was found to be acceptable as an asbestos encapsulant. Designed to encase spray-on fireproofing, asbestos-containing plasters and paints, transite, and asbestos-containing thermal insulation, Lag-Kote’s viscous formulation minimizes dripping, cleanup and product waste. Lag-Kote provides a smooth, washable, aesthetically superior finish that will provide years of lasting protection. Lag-Kote has excellent resistance to alkalis and can be applied directly over galvanized metal, wood, masonry or other sound surfaces. UV inhibitors make Lag-Kote suitable for encasement of exterior transite siding and asbestos fortified paint systems. Lag-Kote is water based.

• I d e a l f o r u s e o n t h e r m a l i n s u l a t i o n

• E x c e l l e n t r e s i s t a n c e t o a l k a l i s

• U V a n d r u s t r e s i s t a n t

• E P A a c c e p t e d e n c a p s u l a n t

Interior and Exterior Asbestos Lagging Encapsulant

3 7

T

he

rm

al

Ins

ula

tio

n R

ep

air

Lag-Kote II applied to asbestos pipe insulation

L a g - K o t e I I

• I d e a l f o r u s e o n i n t e r i o r p i p e l a g g i n g , b o i l e r j a c k e t s a n d b r e e c h i n g

• S m o o t h , w a s h a b l e w h i t e f i n i s h

• I d e a l f o r a p p l i c a t i o n t o p o p c o r n c e i l i n g s a n d i n t e r i o r t r a n s i t e

Lag-Kote II is a thick bridging encapsulant/sealant specifically formulated for application over interior friable Asbestos Containing Material (ACM). It is ideally suited to encapsulate interior pipe lagging, boiler jackets, breeching and other components of heating and ventilation systems. Its thick body minimizes dripping, cleanup and product waste while providing a smooth, washable, aesthetically superior finish that will provide years of protection. Lag-Kote II is a flexible coating that can be applied over galvanized metal, wood, masonry or other sound surfaces to prevent the release of harmful asbestos fibers.

Specifically formulated for interior application

3 8

T

he

rm

al In

su

lat

ion

Re

pa

ir

Pipe wrapped in Lag-Kloth

L a g - K l o t h

Lag-Kloth is a woven fabric impregnated with an inorganic adhesive, designed to repair and/or cover existing asbestos insulation on pipes, boilers and breeching. Areas that are repaired or re-covered with Lag-Kloth can be successfully top coated with Lag-Kote®, Lag-Kote II or SerpiMastic for complete encapsulation. The self-contained adhesive in Lag-Kloth is water activated and non-flammable. Lag-Kloth can withstand temperatures up to 600°F.

• W a t e r a c t i v a t e d

• W i t h s t a n d s t e m p e r a t u r e s u p t o 6 0 0 ° F

• T o p c o a t w i t h L a g - K o t e , L a g - K o t e I I o r S e r p i M a s t i c f o r c o m p l e t e e n c a p s u l a t i o n

• A v a i l a b l e i n t h r e e c o n v e n i e n t s i z e s : 5 ’ x 1 5 ’ B l a n k e t s , 5 ’ x 1 5 0 ’ R o l l s a n d 4 ” x 1 5 0 ’ T a p e S t r i p s

Designed to repair and/or cover existing asbestos insulation on pipes

3 9

T

he

rm

al

Ins

ula

tio

n R

ep

air

K l e a n - P o p S h o w e r

• Compact When Collapsed | Easy and efficient transport and storage. Occupies less space in truck or warehouse than conventional telescoping shower designs.

• Inset Wheels, Built in Handle & Lightweight Design | As portable as a suitcase. Easy for one person to move from place to place. Set-back wheel design makes stacking for storage or transport easy. Lighter than conventional telescoping shower designs.

• Rugged Aluminum Construction | Rigid and durable when assembled.

• Unique Set-Up Design | One person set-up in as little as two minutes. Two curtains with rings already mounted on ceiling rods for privacy. Curtains are easily changed or removed when desired, and replacements are available.

• All-Brass, Strategically-Located Mixing Valve | Quality durable fixture designed to last; mounted on ceiling so equipment can be moved through decon.

• Dimensions | Assembled Size: 30”L x 30”W x 83”H | Collapsed Size: 30”L x 30”W x 10”H

The Klean-Pop shower is a revolution in pop-up shower design. When disassembled, Klean-Pop offers the easy mobility and compact appearance of a suitcase on wheels. One person can move Klean-Pop wherever it needs to be, and set up the shower in as little as 2 minutes. Priced competitively with telescoping designs, and more durable than plastic options, Klean-Pop answers the growing need for a quality decontamination shower that is inexpensive, durable and easy-to-use.

Mobile Decontamination Shower

4 0

D

ec

on

ta

min

at

ion

Sh

ow

er

Dilutable for every situation

55%17%

100%83%

55% 55%

83%45% 45% 45%

17%SerpiFlex

Water

Penetrating

BridgingFull Strength

Removal

Lock-Down

Ground Sealer

S e r p i F l e xMulti-Use Asbestos Encapsulant

SerpiFlex Asbestos Encapsulant is a white, concentrated, water based vinyl acrylic product that can serve your abatement needs for bridging, penetrating, removal, lockdown and soil encapsulation. In testing done by Battelle Laboratories under EPA contract, SerpiFlex was deemed acceptable for the encapsulation of asbestos containing material (ACM). SerpiFlex is also UL® classified as both a bridging encapsulant and penetrating encapsulant for use with classified sprayed fiber (UL Category CBUI: Encapsulant Materials). It is non-combustible and does not contain any solvents or silicates.

• Can be used for all types of asbestos abatement, including encapsulation, lockdown, and removal

• Concentrated formula saves transportation and labor cost

• Tested and found to be effective for up to 20 years

• Maintains the fire protective properties of the asbestos substrate and has negligible effects on its acoustic properties

4 1

S

er

pi

As

be

st

os

Ab

at

em

en

t P

ro

du

ct

s

SerpiMastic Sprayable, tinted green, was used to encapsulate corrugated asbestos roofing and siding.

S e r p i M a s t i cHeavy Duty Asbestos Encasement Coating

SerpiMastic is an off-white, high solids, water based, high performance mastic coating. Two viscosity grades are available: Sprayable and Trowelable. SerpiMastic dries to an ultra durable, weather-resistant protective coating that provides high impact protection for asbestos, cement asbestos board and thermal/insulations on boilers and pipes. SerpiMastic is also UL® classified as a bridging encapsulant for use with classified sprayed fiber and cementitious mixtures (UL Category CBUI: Encapsulant Materials).

• Weather, UV and chemical resistant

• Extremely durable

• Resists impact up to 160 psi

• Trowelable version is ideal for painters mitt/palm application

4 2

S

er

pi A

sb

es

to

s A

ba

te

me

nt

Pr

od

uc

ts

W e t W r a p ‘ N ’ S e a l

Wet-Wrap ‘N’ Seal is a permanent insulation encasement and repair system. It quickly covers pipes, breeching, valves, duct work and other fittings. Wet-Wrap ‘N’ Seal applies quickly and easily. Once dry, it permanently retains its strength, shape and form. Wet Wrap ‘N’ Seal is the lowest cost encasement material available. Using Wet Wrap ‘N’ Seal followed by applying a bridging encapsulant satisfies procedures specified by the National Institute of Building Sciences in 1986 for the proper repair of insulation and lagging. For a bridging encapsulant, use SerpiMastic, Lag-Kote or Lag-Kote II. Available in 4”, 6” and 8” x 9’ rolls.

Water Activated Encasement Repair Cloth

• Applies quickly and easily

• High-strength

• Pre-cut to 9 ft. (2.7m) lengths

• One-step installation

• Saves time and labor

• No maintenance

• No special skills or tools required

4 3

S

er

pi

As

be

st

os

Ab

at

em

en

t P

ro

du

ct

s

*Resists mold growth on the dry coating surface only

B a r r i e r C o a t I I

Barrier Coat II Lead Encapsulant Coating is a white, copolymer acrylic based coating that features 54% solids and meets or exceeds existing standards for lead encapsulants. In addition, Barrier Coat II has excellent film flexibility, superb adhesion and creates a tough surface with outstanding impact and abrasion resistance. It can be applied quickly by spray, roller or brush.

Lead Encapsulant Coating

• Meets the ASTM E 1795 Standard (Interior/Exterior)

• High Solids (54% by volume)

• 123 ft2/gal (3m2/L) at 7 mils dry

• Cost-effective (one coat application)

• Easy to apply (spray, brush or roller)

• Excellent impact/abrasion and UV resistance

• Excellent adhesion and chemical resistance

• Contains an anti-ingestant (Bitrex®)

• Mold resistant*

• Can be painted over with most latex paints

4 4

S

er

pi L

ea

d A

ba

te

me

nt

Pr

od

uc

ts

Power Block is a white, quick drying, high performance 100% acrylic latex coating specifically designed for prime stained or water damaged surfaces. Power Block can be used on interior or exterior surfaces to prevent most bleeding type stains, seal porous surfaces and provide adhesion to hard and glossy surfaces.

Quick drying latex primer

P o w e r B l o c k

• S u p e r i o r s t a i n b l o c k i n g

• I n t e r i o r a n d e x t e r i o r p r i m e r

• E x c e l l e n t a d h e s i o n t o g l o s s y s u r f a c e s

4 5

S

ta

in B

loc

kin

g P

rim

er

PowerStone Plus applied as a primer coat on exterior transite panels before application of SerpiMastic.

P o w e r S t o n e P l u sA multipurpose primer that protects a variety of surfaces

PowerStone Plus is a clear, multipurpose, waterborne acrylic primer that provides protection to a large variety of surfaces. This highly alkali resistant coating resists household cleaners, gasoline, oil and efflorescence. PowerStone Plus seals brick, block and poured concrete to reduce water penetration and prevent surface dusting and staining. PowerStone Plus can be applied to both horizontal and vertical surfaces and is ideal for use on concrete, plaster, brick, slate and stucco. Clean metal surfaces of copper and aluminum can be finished with PowerStone Plus to prevent surface oxidation.

• H i g h l y a l k a l i r e s i s t a n t

• R e d u c e s w a t e r v a p o r t r a n s m i s s i o n

• H e l p s p r e v e n t s u r f a c e d u s t i n g

• E x c e l l e n t p r i m e r f o r m a s o n r y s u r f a c e s

4 6

W

at

er

bo

rn

e A

cr

ylic

Su

rf

ac

e C

on

dit

ion

er

P o w e r R u s t S t o pRust inhibiting 100% acrylic primer

Power Rust Stop is a white, rust inhibiting, 100% acrylic latex direct-to-metal (DTM) coating for use on ferrous metal, galvanized metal and other surfaces exposed to general industrial and atmospheric conditions. Power Rust Stop has excellent aliphatic solvent and water resistance and excellent resistance to most alkalies, detergents and mild acids. This acrylic latex DTM coating does not contain the flammable solvents found in other rust inhibiting paints.

• S t o p s f l a s h r u s t i n g b e f o r e i t s t a r t s

• F a s t d r y i n g f o r m u l a

• D o e s n o t c o n t a i n f l a m m a b l e s o l v e n t s

• E x c e l l e n t r e s i s t a n c e t o m o s t a l k a l i s

4 7

R

us

t I

nh

ibit

ing

Pr

ime

r

Grip-Tack, tinted blue, sprayed on rebar to lockdown low level radioactive particulate.

G r i p - T a c kTacky membrane designed to lock down residual hazardous materials

Grip-Tack is a clear, high solids, water based multipurpose lockdown/adhesive for capturing and sealing residual contaminants present before, during and after demolition or removal projects. Its unique formulation provides a soft, tacky, flexible membrane, which locks down asbestos fibers, lead paint chips and dust to ensure final clearance after the removal of lead and/or asbestos. The sticky finish traps lead dust and airborne fibers making it ideal for over-coating lead paint or asbestos prior to their removal or demolition. This product is also suitable for use as a lead paint adhesive primer for use over high gloss surfaces containing lead paint.

• A d h e s i v e p r i m e r

• D e m o l i t i o n a d h e s i v e

4 8

L

oc

kd

ow

n &

De

mo

litio

n A

dh

es

ive

D i s a s t e r R e s t o r a t i o n P r o d u c t sFiberlock’s RECON line of disaster restoration products are designed to be the most effective solution for fire, smoke and water damage restoration. From cleaners to odor counteractants and smoke odor sealers, Fiberlock has a product for every situation that demands the best results.

SMOKE AND FIRE DAMAGE · FLOOD AND WATER DAMAGE · DISASTER RESTORATION

The Worst Demands The BestTM

4 9

D

isa

st

er

Re

st

or

at

ion

Pr

od

uc

ts

5 0

D

isa

st

er

Re

st

or

at

ion

Pr

od

uc

ts

U L T R A S m o k e O d o r S e a l e rIdeal for structural, finished and decorative surfaces

ULTRA RECON Smoke Odor Sealer is a premium solvent free smoke odor sealant and stain blocker designed to eliminate malodors on multiple surfaces and block tough staining. Ideal for structural, finished and decorative surfaces, ULTRA RECON Smoke Odor Sealer with OdorLock Plus technology is water based and does not contain flammable solvents. This multiphase technology provides one coat odor control on most surfaces and continues to block odors even with seasonal changes in temperature and humidity.

• F in ish grade, solvent f ree

• One coat odor control

• Blocks tough stains

• Moisture permeable

• T intable

• El iminates malodors on mult iple surfaces

• Blocks pet & trauma scene odors

• Easi ly accepts topcoat

Available in White and Clear

STRUCTURAL SURFACES&FINISHED SURFACES

5 1

D

isa

st

er

Re

st

or

at

ion

Pr

od

uc

ts

Smoke Odor Sealer in white being sprayed in an apartment building in Mt. Vernon, WA after a fire.

ASTM E 96B Water Vapor Permeance TestProduct Dry Film Thickness Perm Rating

3090-White 10 dry mils 19.274 perms

3091-Clear 10 dry mils 12.363 perms

Structural restoration sealer

• P e r m a n e n t l y e n c a p s u l a t e s s m o k e o d o r s

• H i g h l y p e r m e a b l e , d o e s n ’ t t r a p m o i s t u r e

• C a n b e a p p l i e d i n d u c t w o r k

• A v a i l a b l e i n a t i n t a b l e w h i t e o r c l e a r

• E x c e l l e n t s t a i n b l o c k e r

• W a t e r b a s e d a n d n o n - f l a m m a b l e

• B o n d s t o n e a r l y a n y s u b s t r a t e

• I d e a l f o r u s e i n w a l l c a v i t i e s

RECON Smoke Odor Sealer is a revolutionary solvent free smoke odor sealant and stain blocker designed to encapsulate malodors on structural surfaces and block the toughest stains. RECON Smoke Odor Sealer with OdorLock technology is water based, permeable and is not flammable.

Unlike typical water based coatings that “wick” smoke odors and stains out of the substrate as they dry, RECON Smoke Odor Sealer with OdorLock technology prevents smoke odors and stains from migrating through the coating while maintaining its breathability. This technology provides one coat odor control and continues to block odors even with seasonal changes in temperature and humidity. RECON Smoke Odor Sealer is your final step to encapsulate residual odors typically found on fire damage restoration projects.

S m o k e O d o r S e a l e r

5 2

D

isa

st

er

Re

st

or

at

ion

Co

at

ing

s

RECON Extreme Duty Odor Counteractant can be used to neutralize the most extreme odors caused by fire and smoke damage.

E x t r e m e D u t y O d o r C o u n t e r a c t a n tOne of the most powerful odor neutralizers available

• M a x i m u m s t r e n g t h o d o r c o u n t e r a c t a n t

• A p p l y b y s p r a y i n g o r a s a c l e a n i n g a d d i t i v e

• C a n b e a p p l i e d w i t h c o l d m i s t f o g g i n g e q u i p m e n t

RECON Extreme Duty Odor Counteractant is a highly concentrated liquid odor counteractant formulated specifically for the treatment of surfaces after fire, water or smoke damage. This product chemically neutralizes the source of malodors and imparts a pleasant, long-lasting fragrance. RECON Extreme Duty Odor Counteractant removes odors caused by tobacco, smoke, urine, pets, garbage, fire-produced odors, and cooking odors. Ideal for use in institutions, hospitals, apartments, sanitariums, restaurants, factories, schools, hotels, kitchens, restrooms, latrines, septic systems, dumpsters, paper mills, recreational vehicles or anywhere odors are a problem. May also be used as a deodorant booster for carpet cleaners and general purpose cleaners.

5 3

D

isa

st

er

Re

st

or

at

ion

Pr

od

uc

ts

RECON Citrus Solvent Cleaner | An advanced degreaser and deodorizer that utilizes a citrus based solvent. This multipurpose concentrate instantly emulsifies grease, oils and fats without the use of harsh acids, caustics/alkalines, petroleum distillates, butyl solvents, chlorinated solvents or ozone depleters. This citrus based, ready-to-use product has an extremely powerful cleaning ability with a pleasant natural citrus fragrance to deodorize effectively even under the most extreme conditions.

RECON Heavy Duty Cleaner | A powerful, water soluble, cleaner and degreaser. Due to its chemical potency, this product is extremely effective in the removal of heavy accumulations of grease, oil, fats, carbon, ink, wax, dirt, soot, tar, asphalt, creosote, rust stains and many soils. It contains a fast acting powerful solubilizing agent that dissolves and suspends any soil, allowing it to be wiped or rinsed away completely.

RECON Extreme Duty Cleaner | One of the most powerful cleaning products available anywhere. Formulated to handle the most extreme cleaning jobs, this high pH, caustic fortified, butyl based product provides superior ease of use in removing grease, oils, fats, carbon, wax, tar and other stubborn soils. RECON Extreme Duty Cleaner is a very high pH butyl cleaner for cleaning and removing the worst deposits in fire, smoke and water damage restoration applications.

CLEANERS

5 4

D

isa

st

er

Re

st

or

at

ion

Cle

an

er

s

Kontrol Kube’s are mobile containment and isolation units designed to quickly and easily establish a temporary negative pressure environment. They are ideal for the control of airborne particulate during hospital renovations, construction and repairs, or for temporary patient isolation and increased surge capacity.

The Kontrol Kube line offers a full suite of products when overhead containment is needed for maintenance or repairs such as cabling, light bulb replacement, HVAC access or any other above ceiling work. In addition, the collapsible soft sided units can also be used for wall access when performing work such as plumbing or installing power and communications outlets. All Kontrol Kube units are 30” wide so they can be quickly moved through all AIA and NFPA compliant doors to any area where dust and particulate control or patient isolation is needed.

K o n t r o l K u b e

The benefits of using a Kontrol Kube include:

• Increased labor savings and increased worker productivity

• Reduced disposable containment materials costs

• Reduced room and department closure costs with targeted containment

• Reduced risk of Healthcare Associated Infections (HAI’s) and the associated liabilities

Mobile Containment Solutions

5 5

M

ob

ile

Co

nt

ain

me

nt

Pr

od

uc

ts

3

10

116

2

1

4

5

7

8

9

12

13

Standard Features11’ Ceiling Reach | Unit reaches 11’ ceilings and accommodates 6’ and 8’ ladders without modification.

10 Windows | Six windows in the aluminum skin as well as four additional windows in the fabric upper enclosure ensure visibility when moving the unit. The windows also permit natural light in and visibility out for those working inside the unit.

Ratcheting Support Poles | Steel support poles with ratcheting and locking mechanisms allow for single handed raising and lowering of the unit.

Ceiling Foam Gasket | Ensures a tight seal between the unit and ceiling.

High Strength, Fire Rated Fabric | Synthetic fabric upper enclosure is over three times stronger than traditional vinyl enclosures. This advanced fabric meets NFPA 701 and California Fire Marshal fire rating.

12” Negative Air Port | Ensures compatibility with all popular negative air machines, including the Kontrol Kube Negative Air Machine.

8” Negative Air Exhaust Port | Enables a negative air machine to be used inside the unit so it can exhaust cleaned air.

Enclosure Pass Through | Permits large items such as conduit or pipes to be passed through the enclosure.

Cable Pass Through (2) | When pulling cable they can be fed from outside into the containment unit.

Locking Casters | 360° swivel, non-marking, locking casters allow the unit to be maneuvered into tight areas and locked for a secure working platform.

Locking Door | Tools and equipment can be left inside the unit securely between shifts, breaks and day to day.

Optional Components:

Negative Air Machine | HEPA Filtered Negative Air Machine ensures effective containment by negatively pressurizing the workspace. This prevents any dust from escaping. The DOP compliant filtered unit ensures single pass HEPA filtration.

AirBase for Negative Air Machine| Attaches to the Kontrol Kube HardPanel and holds the negative air machine. Once set up you have a completely mobile, rolling containment system. The AirBase is designed to accomodate most negative air machines.

9

10

11

12

13

81

3

2

4

6

5

7

The Kontrol Kube HardPanel containment system is an ultra durable solution for mobile containment. Built from high strength aluminum, the Kontrol Kube HardPanel is designed for daily repeated use. The HardPanel is a highly configurable design that can accommodate a HEPA filtered DOP compliant negative air machine on the inside or on the outside of the unit. This enables the user to expand or contract the footprint of the unit depending on the space that is available.

Maximum durability, flexibility and convenience

Quick Facts• Maximum Height - 11’• Minimum Height - 5’11”• Width - 30”• Length - 68”• Accommodates a 6’ or 8’ step ladder• High strength aluminum components• Fire Rated Fabric• Ratcheting & Locking Support Poles

K o n t r o l K u b e H a r d P a n e l

5 6

K

on

tr

ol K

ub

e H

ar

dP

an

el

*When using the 10’ Advanced unit as an anteroom, ceiling height should be over 10 ft in order to fully extend the enclosure.

Quick Facts• Maximum Height - 8’ or 10’• Minimum Setup Height - 6’• Width - 30”• Length - 60”• Accommodates a 6’ or 8’ step ladder• Synthetic fire rated fabric• Detachable flanges for anteroom

and larger containment

K o n t r o l K u b e A d v a n c e d

The Kontrol Kube Advanced containment unit incorporates all the elements of the original TopSider enclosure and adds new features making it easier to create temporary containment. Durability, flexibility and functionality have all been increased making this the most advanced containment enclosure available.

The Kontrol Kube Advanced unit can be used for ceiling and wall access, and can be set up as an anteroom to contain larger areas.* Manufactured with a NFPA 701 & California Fire Marshal rated synthetic fabric, the Advanced enclosure is over three times stronger than traditional vinyl enclosures.

The most versatile containment unit available

5 7

K

on

tr

ol

Ku

be

Ad

va

nc

ed

3

5

6

7

4

1

2

9

4

2

88

8

Synthetic Fabric Enclosure | Over three times stronger than traditional vinyl enclosures. This advanced fabric meets NFPA 701 and California Fire Marshal fire rating.

Detachable Flanges | Anteroom and Multi-Unit for larger containment. Anteroom flanges connect the unit to a doorway enabling room containment. Connector flanges allow multiple units to be connected together.

12” Negative Air Port | Ensures compatibility with all popular negative air machines, including the Kontrol Kube Negative Air Machine.

8’ and 10’ Enclosures | Meets your facilities specific needs. Both units are adjustable down to a working height of 7’.

Webbing Reinforcements | In high stress points and wear areas ensure long life.

“Sag” Restraints | Prevent the enclosure from sagging when lowered. The enclosure folds on itself like an accordion, maintaining a tight profile at any height.

Bolt Action Poles | Make it simple to adjust the height of the unit and increase the overall strength and rigidity of the Uniframe. Sky Dome Ceiling | Clear interior ceiling flaps allows for easy placement of unit for overhead ceiling work.

Collapsible Design | Allows the unit to be stored easily and take up less space. New features allow a unit that is collapsed to be set up in less than 2 minutes.

1

3

6

2

4

5

7

8

9

5 8

K

on

tr

ol K

ub

e A

dv

an

ce

d

K o n t r o l K u b e T o p S i d e r

The Kontrol Kube TopSider is ideal for use when overhead containment is needed for maintenance or repairs such as cabling, light bulb replacement, HVAC access or any other above ceiling work. The TopSider can also be used for wall access when performing work such as plumbing or installing power and communications outlets. With a 30” wide wheel base, the unit can be quickly moved through all AIA and NFPA compliant doors to any area where dust and particulate control is needed.

• I n c r e a s e w o r k e r p r o d u c t i v i t y

• R e d u c e l a b o r c o s t s

• E l i m i n a t e e x p e n s i v e b a r r i e r m a t e r i a l s

• I m p r o v e p a t i e n t o u t c o m e s

• S i m p l i f y t h e I C R A p r o c e s s

• A c c o m m o d a t e s a 6 ’ a n d 8 ’ s t e p l a d d e r

• M a x i m u m h e i g h t : 1 0 ’

Designed to help get the job done, quickly and affordably

5 9

K

on

tr

ol

Ku

be

To

pS

ide

r

*When using the 10’ Advanced unit as an anteroom, ceiling height should be over 10 ft in order to fully extend the enclosure.

Ceiling Access

Anteroom

Infrequent Use Regular, Repeated Use Heavy Duty Use

Ceilings up to 10’ Ceilings up to 8’ Ceilings up to 11’

C h o o s e a C o n t a i n m e n t U n i t

• Low cost vinyl enclosure

• Reaches 10’ ceilings

• For overhead and wall use

TopSider (10’) Advanced (10’)

• Next generation ultra durable fabric enclosure

• Reaches 10’ ceilings

• For overhead, wall and anteroom use*

• Next generation ultra durable fabric enclosure

• Reaches 8’ ceilings

• For overhead, wall and anteroom use

Advanced (8’)

• High strength aluminum components

• Reaches 11’ ceilings

• For overhead use

HardPanel (11’)

6 0

M

ob

ile C

on

ta

inm

en

t P

ro

du

ct

s

K o n t r o l K u b e E x t r a s

• 2 5 0 - 5 0 0 C F M ( v a r i a b l e s p e e d )

• 1 2 ” d u c t a b l e i n t a k e

• R o t o m o l d e d p l a s t i c h o u s i n g

• G F C I p r o t e c t e d a c c e s s o r y o u t l e t

• 2 5 ’ p o w e r c o r d

• 3 s t a g e D O P c o m p l i a n t H E P A f i l t e r e d

• F i l t e r c h a n g e i n d i c a t o r l i g h t

Negative Air Machine

The Kontrol Kube Negative Air Machine offers the perfect combination of power, efficacy and convenience. Weighing in at 44 lbs, this negative air machine delivers a variable speed up to 500 CFM with the HEPA filter installed. The Kontrol Kube HEPA filtered Negative Air Machine, vital to all containment systems, ensures that all dust is captured and is designed to work seamlessly with the Kontrol Kube Mobile Containment Unit.(Negative Air Machine comes equipped with the HEPA, DOP, and Pre-Filters)

FiltersFirst Stage Pre-Filter | High quality filter restores negative air machines to full efficiency. Replace regularly to ensure maximum performance.

Second Stage DOP Compliance Filter | The addition of the 2nd stage DOP Filter Kit ensures one pass HEPA filtration. This filter allows the Kontrol Kube Negative Air Machine to pass laboratory DOP testing conducted per ANSI standards, achieving an efficiency rating of 99.97% against oily aerosol particles down to 0.3 microns.

HEPA Filter | Kontrol Kube HEPA Filters combine filtration ability with filter capacity. To maximize filter life be sure to change the first stage pre-filter regularly.

Carbon Filter | The carbon filter captures a variety of volatile organic compounds (VOCs), including soot and smoke, food odors, fumes from paint and paint thinners, sewer odors and many other compounds.

6 1

K

on

tr

ol

Ku

be

Ac

ce

ss

or

ies

• D e s i g n e d t o s u p p o r t t h e K o n t r o l K u b e N e g a t i v e A i r M a c h i n e

• C o n n e c t s t o t h e K o n t r o l K u b e W h e e l B a s e

• T w o l o c k i n g c a s t e r s

• A d j u s t a b l e f o r c o m p a t i b i l i t y w i t h o t h e r n e g a t i v e a i r m a c h i n e s

The Kontrol Kube AirBase attaches quickly and easily to the Kontrol Kube Wheelbase to enable complete mobility of all ladders, tools, equipment and a negative air machine. This innovative attachment makes moving the Kontrol Kube Mobile Containment system a quick and easy task that can be performed by one person.

AirBase

6 2

K

on

tr

ol K

ub

e A

cc

es

so

rie

s

P r o d u c t C h a r a c t e r i s t i c s S p r a y S e t t i n g s V O C I n f o r m a t i o n

Size Code Color Finish TintableCoverage (ft2/gal) PSI Tip Size VO

C (g

/l)

US

EPA

OTC

CARB

LAD

CO/M

RPO

SCAQ

MD

EPA Registered Fungicidal Coating

AfterShock Fungicidal Coating1 Gallon 8390-1

White Semi-Gloss – 250-400 2000-3000 .017-.021 173 * *5 Gallon 8390-5

Mold Resistant Coatings

IAQ 6000 Mold Resistant Coating† 5 Gallon 8360-5 White Matte 250-400 2000-3000 .015-.019 65

IAQ 6000 GEN3 Mold Resistant Coating† 5 Gallon 8366-5 White Matte 250-400 2000-3000 .019-.021 0

IAQ 6100 Mold Resistant Coating† 5 Gallon 8361-5 Clear Semi-Gloss – 350-600 2000-2800 .015-.019 90

IAQ 6500 Mold Resistant Coating† 5 Gallon 8365-5 Black Eggshell – 250-400 1500-3000 .015-.023 77

IAQ 6000HD Mold Resistant Coating† 5 Gallon 8362-5 White Matte 250-400 2200-2800 .019-.025 91

IAQ 6040 Mold Resistant Coating† 5 Gallon 8363-5 Violet N/A – 400-450 1300-2000 .015-.021 89

Waterproofers, Primers & Sealers

IAQ 3000 Masonry Block Filler 5 Gallon 8330-5 White Matte 100-200 2500-3000 .015-.019 81

IAQ 4000 Acrylic Latex DTM Primer 5 Gallon 8340-5 White Matte 400-450 1500-2500 .017-.021 98

IAQ 5000 Stain Blocking Primer 5 Gallon 8350-5 White Matte 400-500 2200-2800 .015-.017 93

IAQ 9000 Mold Resistant Masonry Waterproofer† 5 Gallon 8395-5 White Matte 100-125 Not Recommended 95

HVAC Sealants & Coatings

IAQ 7000 HVAC Sealant 5 Gallon 8370-5 White Gloss 100-200 2200-3000 .017-.023 52

IAQ 7500 HVAC Sealant 5 Gallon 8375-5 Clear Gloss – 100-200 2200-3000 .017-.023 54

IAQ 8000 HVAC Sealant 5 Gallon 8380-5 White Semi-Gloss 200-600 2500-3000 .019-.023 90

IAQ 8500 HVAC Sealant 5 Gallon 8385-5 Black Semi-Gloss – 200-600 2500-3000 .019-.023 89

6 3

M O L D P R O D U C T R E F E R E N C E G U I D E

*Aftershock is not EPA registered for sale in California. †Resists mold growth on the dry coating surface only

P r o d u c t C h a r a c t e r i s t i c s E PA R e g i s t r a t i o n A p p l i c a t i o n s

Size Code Color Active Ingredient

Dilution Ratioor

Ready-To-Use EPA

Toxi

city

Cat

egor

y

EPA

Reg

iste

red

Disi

nfec

t Non

-Por

ous M

ater

ial

Sani

tize

Poro

us M

ater

ial

EPA

Reg

iste

red

- Bla

ck W

ater

Effec

tive

in 9

8% S

oil L

oad

Org

anis

m K

ill C

laim

s

Wat

er D

amag

e

Mol

d Re

med

iatio

n

Stai

n Re

mov

al

Extr

eme

Dut

y St

ain

Rem

oval

Hea

vy D

uty

Clea

ning

Extr

eme

Dut

y Cl

eani

ng

Laun

dry

Addi

tive

Disinfectants and Sanitizers

ShockWave Disinfectant, Sanitizer, Fungicide, Cleaner, Concentrate

1 Gallon 8310-1Blue Quaternary Ammonium Chloride 2-4 oz./gallon II 130+ – – – –

10 oz. Bottle 8311-10

ShockWaveRTU Disinfectant, Sanitizer, Fungicide, Cleaner, Pre-mixed

1 Gallon 8316-1Clear Quaternary Ammonium Chloride Ready-To-Use III – 120 – – – – –

5 Gallon 8316-5

ShockWave Hydrogen Peroxide

Disinfectant, Sanitizer, Fungicide, Cleaner, Pre-mixed 1 Gallon 8318-1 Clear Hydrogen Peroxide Ready-To-Use IV – – – 27 – – – – –

IAQ 2000 Disinfectant & Cleaner, Concentrate 1 Gallon 8320-1 Blue Quaternary Ammonium Chloride 2 oz./gallon II – – 41 – – – – –

IAQ 2500 Disinfectant & Cleaner, Pre-mixed 5 Gallon 8325-5 Purple Quaternary Ammonium Chloride Ready-To-Use III – – 36 – – – – –

Cleaners and Stain Removers

Advanced Peroxide Cleaner

High Foaming Mold & Mildew Stain Remover 2.5 Gallon 8314-2.5 Clear Hydrogen Peroxide Ready-To-Use – – – – – – – ‡ ‡ – – –

HydroBoost Additive for Advanced Peroxide Cleaner 1 Quart 8313-Q Red Sodium Metasilicate 16 oz./gallon – – – – – – – ‡ ‡ –

HydroBrite Powder Additive for Advanced Peroxide Cleaner 1.65 lbs. 8312-

1.65 White Sodium Carbonate 1-6 scoops – – – – – – – ‡ ‡ –

IAQ 1000 Mold & Mildew Stain Remover 5 Gallon 8315-5 Clear Hydrogen Peroxide Ready-To-Use – – – – – – – ‡ ‡ – – – –

Instant Mold Stain Remover

Aggressive Mold & Mildew Stain Remover 1 Gallon 8317-1 Straw Sodium Hypochlorite Ready-To-Use – – – – – – – ‡ ‡ –

6 4

M o l d P r o d u c t sProven results from the most trusted brand

M O L D P R O D U C T R E F E R E N C E G U I D E

‡For the cleaning and removal of mold stains, dirt and inanimate particulate. No claim is made by these products to prevent, destroy, repel or mitigate any living organism.

P r o d u c t C h a r a c t e r i s t i c s S p r a y S e t t i n g s V O C I n f o r m a t i o n

Size Code Color Finish TintableCoverage (ft2/gal) PSI Tip Size VOC

(g/l)

US

EPA

OTC

CARB

LAD

CO/M

RPO

SCAQ

MD

Lead Encapsulants

LBC Professional Lead Encapsulant (Type III) - Interior/Exterior

5 Gallon

5800-5 Antique Linen

Matte

–

120* 2500-3000 .019-.021 88 5801-5 White

5801-5-SPCL Black –

1 Gallon 5801-1 White

ChildGuard Interior/Exterior Lead Encapsulant Coating 1 Gallon 5600-1 White Matte 120* 2500-3000 .019-.021 88

Barrier Coat II Lead Encapsulant Coating 5 Gallon 2801-5 White Matte 120* 2500-2800 .021-.023 55

Post Removal Lockdowns

Lead Shield Post Removal Lockdown/Sealant 5 Gallon

5470-5 ClearSemi-Gloss

–

450 2000-3000 .015-.021

96

5475-5 Blue – 96

5477-5 White 96

6 5

L E A D A B A T E M E N T P R O D U C T R E F E R E N C E G U I D E

*At 7 mil dry film thickness

P r o d u c t C h a r a c t e r i s t i c s

VOC

(g/l)

Size Code Color Coverage (ft2/gal) Odor pH Dilution Ratio Cleaning Action

Lead Cleaners & Wipes

LeadSafe Cleaner Concentrated Lead Cleaner1 Quart 5496-12

Light Green 500-1500 Slight 5-6.2 6-7 oz./gallon Chelation 01 Gallon 5496-1

LeadSafe Wipes Heavy-Duty, Pre-Soaked TSP Wipes 90 Towels per Canister 5498-90C White Towelette – Slight 11.5-12 – TSP 0

P r o d u c t C h a r a c t e r i s t i c s S p r a y S e t t i n g s

VOC

(g/l)

Size Code Color Coverage (ft2/gal) Odor pH Fast

Act

ing

Neu

tral

izat

ion

Requ

ired

PSI Tip Size

Paint Strippers & Removers

Piranha 2 Heavy-Duty Paint Remover Gel 5 Gallon 5720-5 Clear/Hazy 50-100 Strong 7-9 – 2600 .017-.021 321

Piranha 4 Solvent Gel 5 Gallon 5740-5 Blue 250-400 Moderate 7-8 – 2600 .019-.021 520

Piranha 8 Alkaline Paste 5 Gallon 5780-5 Off-White 6-25 Slight >13 – Contact Fiberlock 0

Piranha NexStrip Water Based Paste 5 Gallon 5700-5 Off-White 40-60 None 6 – – 3200 .023-.027 0

Piranha NexStrip Pro Water Based Paste 5 Gallon 5701-5 Off-White 40-60 Mild 2.7 – – 3000 .023-.027 40

Piranha NexStrip 8 Alkaline Paste 5 Gallon 5702-5 Off-White 6-25 Slight 13 – Contact Fiberlock 0

6 6

L e a d A b a t e m e n t P r o d u c t sProven results from the most trusted brand

L E A D A B A T E M E N T P R O D U C T R E F E R E N C E G U I D E

P r o d u c t C h a r a c t e r i s t i c s S p r a y S e t t i n g s V O C I n f o r m a t i o n

Size Code Color Finish TintableCoverage (ft2/gal) PSI Tip Size VO

C(g/

l)

US

EPA

OTC

CARB

LAD

CO/M

RPO

SCAQ

MD

Bridging and Penetrating Encapsulants

ABCBridging/Penetrating Asbestos Encapsulant/Sealant

5 Gallon

6421-5 Off-White

Gloss

50-100 2200-3000 .017-.023

64

6422-5 Clear – 56

6423-5 Green – 56

ABC Fiberspray Asbestos Encapsulant/Sealant 8 oz. Cans 6410-8 Off-White Gloss – 35-40 ft2/

can N/A N/A 64

Lag-Kote Interior/Exterior Bridging Encapsulant 5 Gallon 6424-5 White Matte 75-175 2200-2700 .015-.019 165

Lag-Kote II Asbestos Bridging Encapsulant

2 Gallon 6420-2White Semi-Gloss 75-175 2200-2700 .017-.021 89

5 Gallon 6420-5

TBC Interior/Exterior Encapsulant Coating for Transite 5 Gallon 6497-5 White Matte 50-100 2500-3000 .019-.021 88

SerpiFlex Asbestos Encapsulant 5 Gallon 2451-5 White Matte 50-100 2200-3000 .017-.022 76

SerpiMastic Interior/Exterior High-Temp Asbestos Encapsulant

5 Gallon - Trowelable 2418-5

Off-White Flat 18-30 1000 .027-.029 20 5 Gallon - Sprayable 2419-5

Lockdowns

Fiberset PMPost-Removal Surface Sealant/Lockdown/Removal Encapsulant

5 Gallon

7470-5 White

Semi-Gloss – 350-500 1700-3000 .015-.021

52

7475-5 Clear 18

7480-5 Blue 71

A S B E S T O S A B A T E M E N T P R O D U C T R E F E R E N C E G U I D E

6 7

P r o d u c t C h a r a c t e r i s t i c s S p r a y S e t t i n g s

Size Code Color Coverage (ft2/gal) OdorSurface Tension

Dilution Ratio PSI Tip Size VO

C (g

/l)

Wetting Agents

Penewet Wetting Agent & Surfactant 5 Gallon 6450-5 Clear 500 Slight 32 dynes Ready-To-Use 400-500 .017-.023 0

P r o d u c t C h a r a c t e r i s t i c s

Size Code Color Coverage (ft2/gal) Odor Rewettable Fast Set600º F Temp. Resistance

Topcoat-able

Thermal Insulation Repair

Lag-Kloth Water-Activated Repair Cloth

5’x15’ Blanket 6425-U

Off-White

75 ft2

Slight – 5’x150’ Roll 6426-U 750 ft2

4”x150’ Tape (3 rolls) 6427-U 150 ft2

Wet-Wrap ‘N’ Seal

Asbestos Encasement Repair Cloth

4”x9’ (60 Rolls) 2432-U

White

3 ft2

Slight – – 6”x9’ (40 Rolls) 2433-U 4.5 ft2

8”x9’ (30 Rolls) 2434-U 6 ft2

A S B E S T O S A B A T E M E N T P R O D U C T R E F E R E N C E G U I D E

6 8

A s b e s t o s A b a t e m e n t P r o d u c t sProven results from the most trusted brand

6 9

I n d u s t r i a l C o a t i n g sProven results from the most trusted brand

P r o d u c t C h a r a c t e r i s t i c s S p r a y S e t t i n g s V O C I n f o r m a t i o n

Size Code Color Finish TintableCoverage (ft2/gal) PSI Tip Size VO

C (g

/l)

US

EPA

OTC

CARB

LAD

CO/M

RPO

SCAQ

MD

Specialty Industrial Coatings

Grip-Tack Lockdown & Demolition Adhesive for Lead & Asbestos 5 Gallon 6408-5 Clear Gloss 200 1900-2500 .015-.019 0

Powerstone Plus Waterborne Acrylic Surface Conditioner 5 Gallon 5489-5 Clear Gloss 250-300 1400-1600 .015-.019 90

Power Rust Stop 100% Acrylic Rust-Inhibiting Primer 5 Gallon 5493-5 White Eggshell 400-500 2300-2800 .017-.021 98

PowerBlock Quick-Drying Latex Primer 5 Gallon 5450-5 White Matte 400-500 2300-2700 .017-.021 98

I N D U S T R I A L C O A T I N G S P R O D U C T R E F E R E N C E G U I D E

P r o d u c t C h a r a c t e r i s t i c s

Size Code Color Odor pH

Dilution Ratioor

Ready-To-Use Wet Fog VOC

(g/l)

Odor Counteractants

RECON Extreme Duty Odor Counteractant

Multi-Purpose Odor Counteractant 1 Gallon 3041-1 Clear Fresh Scent 7-7.5 Ready-To-Use or

1-8 oz./gallon 25

Cleaners

RECON Citrus Solvent Cleaner Citrus Degreaser/Deodorizer 1 Gallon 3022-1 Orange Orange 11.5-12.5 RTU or 2-4 oz./gallon 788

RECON Extreme Duty Cleaner High pH Butyl Cleaner 1 Gallon 3024-1 Purple Butyl 13.0-14.0 2-16 oz./gallon 202

RECON Heavy Duty Cleaner Cleaner/Degreaser 1 Gallon 3027-1 Orange Slight 12.0-13.0 2-4 oz./gallon 49

7 0

D I S A S T E R R E S T O R A T I O N P R O D U C T R E F E R E N C E G U I D E

D i s a s t e r R e s t o r a t i o n P r o d u c t s

P r o d u c t C h a r a c t e r i s t i c s S p r a y S e t t i n g s V O C I n f o r m a t i o n

Size Code Color Finish TintableCoverage (ft2/gal) PSI Tip Size VO

C (g

/l)

US

EPA

OTC

CARB

LAD

CO/M

RPO

SCAQ

MD

Restoration Coatings

RECON Smoke Odor Sealer

Smoke Odor Sealant with OdorLock Technology

1 Gallon 3090-1White

Gloss

200 2200-3000 .017-.023

68

5 Gallon 3090-5

1 Gallon 3091-1Clear 60

5 Gallon 3091-5

ULTRA RECON Smoke Odor Sealer

Smoke Odor Sealant with OdorLock Plus Technology

1 Gallon 3092-1White

Flat

200 2000-3000 .015-.021

49

5 Gallon 3092-5

1 Gallon 3093-1Clear 69

5 Gallon 3093-5

M a n u f a c t u r i n g F a c i l i t yFiberlock’s state of the art headquarters and manufacturing facility was built in 2000 and was designed to be the most advanced manufacturing facility in the industry. Features such as automated raw material and mixing systems, zero wastewater discharge practices, and limited plant emissions have enabled Fiberlock to produce consistent, high quality products in an environmentally conscious facility.

The full time R&D staff and product development center is the core of innovation where new products are developed. Leveraging strong relationships with raw material suppliers and years of experience Fiberlock is on the forefront of new coatings, cleaners, and disinfectant technology.

Before any products are introduced they must go through a battery of rigorous performance and quality assurance testing to ensure they meet the high standards Fiberlock is known for.

C

ap

ab

ilit

ies

Computer controlled mixing tanks Bulk raw material storage

Finished goods Raw material storage Production line

7 1

Fiberlock warehousing and logistics systems ensure that product is always available.

• With multiple warehouses to serve our customers, Fiberlock can deliver product to most of the US within 2 days.

• International distribution centers avoid the costs and delays associated with clearing customs and long transit times.

During catastrophic events Fiberlock’s emergency response program ensures that product is in stock and ready for delivery when needed.

• Temporary warehouses, located in the most affected areas, provide same day delivery of product.

• Manufacturing capabilities ensure a constant, uninterrupted supply of product to meet any demand.

US Distribution CentersNortheast | Andover, MA

Midwest | Louisville, KY

South Central | Houston, TX

Northwest | Seattle, WA

Southwest | Los Angeles, CA

International Distribution CentersCanada | Toronto, ON

Australia | Brisbane, QLD & Melbourne, VIC

United Kingdom | London, England

Corporate Headquarters150 Dascomb Rd.Andover, MAt: 800.342.3755f: 978.475.6205

P r o d u c t A v a i l a b i l i t yFiberlock is ready to serve our customers

C

ap

ab

ilitie

s

7 2

Notes

Notes

Notes

L e a r n m o r e a t w w w . f i b e r l o c k . c o m o r c a l l 8 0 0 . 3 4 2 . 3 7 5 5

ABC, Aftershock, Barrier Coat, ChildGuard, IAQ, Recon, Kontrol Kube, Lag-Kloth, Lag-Kote, LBC, Lead Shield, NexStrip, Piranha, SerpiFlex, ShockWave and the slogans, product labeling, logos and other marks in this brochure are the trademarks of Fiberlock Technologies. © Fiberlock Technologies. All rights reserved. 1500417 Version 6

Fiberlock Technologies is a division of ICP Construction, Inc.

L e a r n m o r e a t w w w . f i b e r l o c k . c o m o r c a l l 8 0 0 . 3 4 2 . 3 7 5 5

P R O F E S S I O N A L P R O D U C T S ,

P R O F E S S I O N A L R E S U L T S