Mold Prevention & Remediation

Jim Biddle, MS, CIHNAU Environmental Health & Safety928-523-6109 (office)James.biddle@nau.edu

2

Presentation Format

• Prevention• Is it mold?• Quantity• Type of host substrate • Where’s the water source?• Do we need help or can we do it in-

house?• Guidelines for removal & PPE

3

Prevention: Control Water Sources!

• Mold spores are everywhere and can remain non-viable (not living but ready to live) for years

• Mold needs water to live; spore with water comes “alive” and starts to spread

• Lives on cellulosic type materials like cardboard, wood, paper side of drywall, paint on drywall, cove base or carpet glues/adhesives

• Controlling amount of water to colony controls growth rate/amount

4

Is it Mold?

• First, and perhaps most importantly, we need to determine if it is mold. Some building substrates with “contamination” may look deceiving….

5

Is it Mold? (cont.)

6

Is it mold? (cont.)

7

Is it mold? (cont.)

8

Is it mold? (cont.)

9

Is it mold? (cont.)

10

Is it mold? (cont.)

11

Is it mold? (cont.)

12

Is it mold? (cont.)

13

Is it mold? (cont.)

14

Is it mold? (cont.)

15

Is it mold? (cont.)

16

If Not Mold…

• Water damage still an issue– Stop the water – Commence restorative drying of

materials after water source secured (within 24 hours)

• Amount of water damage will determine whether drying can be done in-house or by outside vendor

17

Restorative Drying

18

Dehumidification

If it is Mold….

How much is there?More or less than one sheet of drywall (~30 sq. ft)?

<30 square feet

EPA/OSHA/CDC says can be safely removed / cleaned in-house with Custodial, Res Life, Carpentry/Paint staff(If nobody has allergies)

>30 square feet…

Most likely need a qualified vendor to remove (aka “remediation”)

22

Remediation Time!

• General consensus among recognized organizations is to just get it out (EPA, AIHA, ACGIH, IICRC, etc.)

23

But how?

• Utilize “qualified” remediation firms• Latest, greatest, and safest

standard for removal is from Institute of Inspection, Cleaning & Restoration Certification (IICRC Standard S520, 2003)

24

IICRC Standard

• IDs three categories of indoor mold contamination resulting from water intrusion– Condition 1 (normal fungal ecology)– Condition 2 (settled spores)– Condition 3 (actual growth)

25

What condition is this?>/< 30 sq. ft?

26

Condition/threshold amount?

27

What’s the issue here?

28

And this?

29

Condition/threshold?

30

Check Mechanical Rooms Often

31

Conclusion

• Identify if substrates have mold growth or not

• Stop water intrusion if possible/safe to do so, or get assistance (plumbing or maintenance person, etc.)

• <30 sq. ft: remove moldy contaminated materials following IICRC protocol

• >30 sq. ft: probably need outside help

• Insurance will most likely cover costs