INDUSTRIAL OILSMOL Compressol 150
compressor oil
Product benefits- excellent oxidation resistance- long service
life- good high temperature stability- low tendency of coke and
other deposit formation- outstanding wear and corrosion protection-
good water separation
ApplicationsMOL Compressol 150 premium performance compressor
oil is recommended for the lubrication of single- ormulti-stage
heavy-duty compressors delivering and compressing air and inert
gases (e.g. nitrogen, hydrogen andhydrocarbon derivatives).
Its application is especially advantageous for the lubrication
of air compressors operating under heavy-dutyconditions with high
(above 220 C) discharge temperature.The service intervals of the
oil accomplish 5000 to 8000 hours depending on the load, without
severe degradation ofthe oil and formation of deposits.
MOL Compressol 150 must not be applied to lubricate compressors
for delivering oxygen, chlorine or otheraggressive gases!
MOL Compressol 150 can be applied for separate cylinder
lubrication and high temperature bearing lubrication aswell.
Specifications and approvalsViscosity grade: ISO VG
150ISO-L-DABDIN 51506 VDLDIN 51517-2 (CL)
Product descriptionMOL Compressol 150 compressor oil is blended
from selected base oils of low deposit formation tendency with
highlyefficient antioxidant and rust preventing additives.
MOL Compressol 150 compressor oil is formulated to keep carbon
deposits at a minimum level on compressorvalves and in air
discharge systems.
MOLCompressol 150 exhibits good demulsibility and protection
against rust.
Manufactured and distributed by: MOL-LUB Ltd.Technical service:
H-1117 Budapest, Budafoki u. 59.
H-1986 Budapest, MOL Plc. Tel: +36-1-4640236 Fax: +36-1-4640304
E-mail: [email protected] revision:
2012.10.10 14:14
INDUSTRIAL OILSMOL Compressol 150
compressor oil
Typical propertiesProperties Typical values
0,889Density at 15C [g/cm3]
156Kinematic viscosity at 40C [mm2/s]
14,85Kinematic viscosity at 100 C [mm2/s]
94Viscosity index
-24Pour point [C]
280Flash point (Cleveland) [C]
0,11Conradson carbon residue [mass %]
The characteristics in table are typical values of the product
and do not constitute a specification.
Storage and handling instructionsStore in the original container
in dry, properly ventilated area. Keep away from direct flame and
other sources ofignition. Protect from direct sunlight.During
transport, storage and use of the product follow the work safety
instructions and environmental regulationsrelating to mineral oil
products.For further details please read the Material Safety Data
Sheet of the product.In the original container under the
recommended storage conditions: 48 monthsInflammability hazard:
Grade IV.Recommended storage temperature: max. 40C
Ordering informationSAP code and packaging:
10 l plastic can13006071216.5 l steel drum13005367
Order booking ( toll-free):
Phone: 80/201-331 (between 07-16 h weekdays )
Manufactured and distributed by: MOL-LUB Ltd.Technical service:
H-1117 Budapest, Budafoki u. 59.
H-1986 Budapest, MOL Plc. Tel: +36-1-4640236 Fax: +36-1-4640304
E-mail: [email protected] revision:
2012.10.10 14:14
