Upload
ricm152
View
213
Download
0
Embed Size (px)
Citation preview
7/25/2019 MOL Biokom FG 100_Technical Data Sheet_English
1/1
M a n u f a c t u r e d a n d d i s t r i b u t e d b y : MO L - L U B L t d .
INDUSTRIAL LUBRICANTS
MMOOLLBBiiookkoommFFGG110000
BBiiooddeeggrraaddaabblleecchhaaiinn--ssaawwlluubbrriiccaattiinnggooiillFORMS OFPACKAGING:
216.5litres
NON-RETURNABLE
DRUM
5 litres
PLASTIC
CAN
1 litre
PLASTICBOTTLE
Description of product
MOL Biokom FG 100 chain-saw lubricat-ing oil is an environmentally friendlyproduct since it contains a readily biode-gradable vegetable base oil and biode-gradable additives.
Typical properties
Quality characteristics
Typical value
MOL Biokom
FG 100
Density at 15C, g/cm3 0.917
Viscosity at 40C, mm2/s 100
Flash point (COC), C 220
Pour point, C -27
Viscosity index 180
Biodegradability according
to CEC L-33-T-82, %
above 95
The chain-saw lubricating oil is welladapted to the operating conditions andexhibits good tackiness properties.
The properly high viscosity provides anextremely reduced wear in the operatingtemperature range of the chain saw,since the hydrodynamic oil layer is highlythick and stable.
The product has a low pour point and the
viscosity varies only slightly with the tem-perature, therefore it can be usedthroughout the year.
MOL Biokom FG 100 meets all the re-quirements set for chain-saw lubrication:wear and friction reduction, tackiness,good flow properties, corrosion preven-tion and environmentally friendliness.
According to the CEC L-33-T-82 method,MOL Biokom FG 100 chain-saw oil canbe biologically degraded at 98% veryquickly, - in 7 days instead of 21 days asspecified in the standard and thus theproduct is ecologically beneficial to theenvironment and nature in contrast to thetraditional mineral oil-based lubricatingoils.
Due to the good tackiness properties ofMOL Biokom FG 100 only a very smallamount of oil is thrown off the chain-saw,thus the oil mist load to the machine op-erator and the environment is low.
The product reduces overheating of theguiding plate and the chain and de-creases wear. If used properly, the spe-cific oil consumption can be decreased.
Fields of application
Forestry, logging, gardening works.
Performance levels,approvals
ISO/CD 11679, NORM 2030
Availability
In 216.5 litres non-returnable steel drum,5 litre plastic can and 1 litre plastic bottle.
Instructionsfor handling and storage
During transport, storage and use of theproduct safety instructions relating tomineral oil products should be followed.
Inflammability hazard grade: IV.
T e c h n i c a l s e r v i c e : H- 1 1 1 7 B u d a p es t , O k t b er h u s zo n h a r ma d i k a u . 1 8 .
H - 1 9 8 6 B u d a p es t , MO L Pl c . : + 3 6 - 1 - 4 6 4 0 2 3 6 F a x : + 3 6 - 1 - 4 6 4 0 3 0 4 E m a i l : l u b r i ca n t s @mo l . h u