Stop Over-Drying and Under-Drying Your Resins!The MoistureMaster™ sensor is the only online, real time moisture analyzer that provides moisture content of hygroscopic plastics in percent or ppm (parts per million).

Throughputs up to 3,000 lb./hr. (1360 kg/hr.)MoistureMaster™ SA Stand Alone Sensor

Now you can retrofit ANY existing dryer hopper – no matter the brand – including Conair, UNA-DYN, AEC, Motan and more with the MoistureMaster™ sensor. Just hook up our Ethernet based control and be instantly monitoring actual online pellet moisture.No more guesswork with dew point and time-based estimates! No more wasteful over-drying! No more under-drying because of changes of incoming resin!No more time-consuming offline testing that identifies out-of-spec material after bad parts are produced.

MoistureMaster™ Series Features BryScan 100 On-Line Moisture Sensor Technology. (International Patent#WO2012/004621)

Features of Retrofit MoistureMaster™:Retrofit MoistureMaster Sensors On any hopper, silo, material line or process machine throat.

PLC Control With High Resolution Color Touch Screen Monitors material moisture content and temperature for up to four or eight sensors.

Control Can be Interfaced With Remote PC’s or Laptops Ethernet connectivity provides trend charts for that all-impor-tant verification/validation process.

Enter upper and lower moisture content parameters Alarm will warn you if moisture parameters are exceeded.

Control Options For Slide Gate and/or Diverter Valve Operate slide gate or diverter valve if “out-of-tolerance” material is being produced.

Application Diagrams for MoistureMaster Stand Alone (SA):

Normal Drying Process Loop For ANY Hopper With MoistureMaster™ SA

MoistureMaster™ SA Control Offers Options For Diverting Out-Of-Spec Material

Under-Dried Process Loop For ANY Hopper With MoistureMaster™ SA

Under normal drying conditions, properly dried material is transferred to process machine.

Under-dried material is recirculated through drying hopper to attain proper moisture level.

ANY Hopper

ANY Hopper

Over-Dried Process Loop For ANY Hopper With MoistureMaster™ SA

MoistureMaster™ SA Sensor With Control Can Be Used With ANY Silo… Regardless of Brand Or Mounted On Process Machine Throat

Over-dried material is diverted to a bulk bin where it can be re-moisturized and reprocessed.

MoistureMaster-SA can be mounted under ANY silo to measure varying moisture content and temperature of material entering process.

ANY Hopper

ANY Silo

222 East Thomas Avenue Baltimore, MD 21225 USA 410-789-4811 | Fax: 410-789-4638 1-800-BESTDRY (800-237-8379) | sales@novatec.com | www.novatec.com

© 2015 NOVATEC, Inc. All rights reserved All information in this bulletin is subject to change without notice.

Form # MMSA 09 SEPT 2015

Control Screens For Retrofit MoistureMaster™ – 7” high resolution color touch screen

Simply enter your upper and lower moisture parameters for any material.

The retrofit MoistureMaster™ control monitors and provides trending for up to four or four sensors.

Trending screens can be retained for verification/validation records.

Standard Package: MM-SA-4 MoistureMaster Stand Alone System includes: (1) 7” NovaTouch™ touchscreen display - MoistureMaster™ control panel (controls up to 4 sensors) (1) MoistureMaster Sensor (1) 5 meter cable for connection Sensing range: Selectable either 100 - 5000 PPM or 0. 010 - 0. 500% Accuracy, +/- 50 PPM - guaranteed to as low as 100 ppm. Material temp measurement range 50–300° F Operating environment temp range 40–120° F Requires 120/1/60 power @ 5 AMPS 12” x 12” x 6” NEMA 12 Enclosure MM-AO MoistureMaster Add On Sensor includes: (1) MoistureMaster Sensor (1) Cable T adaptor for panel integration (1) 5 meter cable for connection

ADP-MM-SCR MoistureMaster Adaptor Flange Set* includes: (1) Upper flange made to customer specifications (1) Lower flange made to customer specifications Painted carbon steel or aluminum

MoistureMaster Shielded Cables: Sensor Network Trunk and Drop Extension Cables Lengths of 5, 10, 30 and 50 meters Male/Female for Easy Coupling May be combined under 150 meters to get to proper length

Adapters for Drying Hoppers: 3”, 4.75”, 6”, 8”, 9.75” and 14”. Go to: www.moisturemaster.com/installation-info.php for complete drawings.

Part Number Description

MM-SA-4 MoistureMaster Stand Alone System (Expandable to 4 Sensors)

MM-AO MoistureMaster Add On Sensor

ADP-MM-SCR MoistureMaster Adaptor Flange Set

econn-004 Additional MoistureMaster Shielded Cable - 5 meter

econn-005 Additional MoistureMaster Shielded Cable - 10 meter

econn-006 Additional MoistureMaster Shielded Cable - 30 meter

econn-007 Additional MoistureMaster Shielded Cable - 50 meter

3.64”

3.88”

5/16 x 18 (4) Places

8.98”

5.91”

3.88”

6.1”

Cable Connection

Cable Connection

Board Enclosure

Cooling Fan

Not to Scale

Board Enclosure

SensorThroat

Part Number ProductOutlet

(inches)Square B.P.

(inches)

ADP-MM-475-600

NPH 200-1000 4.125 6.00 x 6.00 4.75 x 4.75“VTB-4, VPV”

ADP-MM-300 “NPH 15-30, VTB-3” 1.5 3.00 x 3.00

ADP-MM-475 NPH 60-150 2.125 4.75 x 4.75

ADP-MM-800NPH 1200-6000 6

8.00 x 8.00VTB-8 6

ADP-MM-975 VTB-9 8 9.75 x 9.75

ADP-MM-1400 ADP-MM-1499 12 14.00 x 14.00

MoistureMaster Sensor Dimensions

by