Mohd Hasbullah Idris Profession

MOHD HASBULLAH IDRIS Dept. of Materials, Manufacturing & Ind. Eng.

Faculty of Mechanical Eng. Universiti Teknologi Malaysia

1

`

CURRICULUM VITAE

1.0 PERSONAL DATA

Name : Mohd Hasbullah Idris Profession : Professor Universiti Teknologi Malaysia Date of Birth : 26th Dec. 1962 Office Tel. : 6 07 5534735 H/phone : 6 019 7201801 Email : [email protected]

2.0 ACADEMIC QUALIFICATIONS

1. PhD (Mechanical Engineering), 2002 Universiti Teknologi Malaysia, Malaysia

2. MPhil (Manufacturing Engineering), 1995

Loughborough University of Technology, United Kingdom 3. B. Eng (Mechanical Engineering-Production), 1986

Universiti Teknologi Malaysia, Malaysia

2.1 FIELDS OF SPECIALISATION:

Manufacturing Processes and Technology, Foundry Engineering, Casting Technology, Magnesium Processing, Biodegradable Materials, ISO 9000 Quality Management System, Academic Quality Assurance

2.2 WORKING EXPERIENCE:

1. Manufacturing Planning Executive, Kulitkraf Sdn. Bhd., 1986-1987

Preparation of production plan, assisting Production Manager in acquiring new source of materials, involved in re-layout, designing and supervising production line.

2. Production Executive, Kulitkraf Sdn. Bhd., 1988

Head of Production, Planning and Engineering Department. Responsible in planning and production of the footwear & leather products, plant maintenance and projects. Involved quality control of the products manufactured.

3. Materials Supply Executive, Kulitkraf Sdn. Bhd., 1989

Head of Purchasing/Sourcing and Quality assurance Department. Responsible for supply of materials, sourcing (locally & abroad) and recommending alternative materials, ensuring quality of incoming materials and outgoing products.



2

4. Remelt Superintendent, Aluminium Company Of Malaysia Bhd (ALCOM), 1989-

1990

Head of Remelt Department. Responsible for the setting and starts-up of the Remelt Department. Responsible for remelting, casting, homogenising, quality assurance, planning and safety activities in billet production, involved in training of remelt personnel, supervision of factory projects, ensuring the conformation to government regulations relating to remelting, recommending upgrading of remelting and related operation, member of the ALCOM's Extrusion Division Safety Committee.

5. Material Supply Superintendent, Aluminium Company Of Malaysia Bhd (ALCOM),

1990-1991

Head of Remelt, Warehouse & Metal Supply Departments. Shoulder responsibilities as Remelt Superintendent as well as responsible for warehousing, stock control and shipping of finished products, planning of metal usage for Extrusion Division, involved in re-layouting exercise of Extrusion Division, liason with Purchasing Dept. and transport/shipping agencies for remelting and shipping activities.

6. Academic Staff, UTM, since May 1991

1. Assistant Lecturer , May 1991 2. Lecturer, May 1996- July 2005 3. Senior Lecturer, July 2005 – August 2007 4. Associate Professor, August 2007-December 2012 5. Professor, 3rd January 2013-present

3.0 TEACHING 3.1 BACHELOR DEGREE COURSES

1. Manufacturing Processes 2. CAD/CAM, 3. Production and Metrology Laboratory 4. Casting and Welding Technology 5. Material Processing and Fabrication 6. Engineering Materials 7. Precision Engineering 8. Casting Technology

3.2 MASTER DEGREE COURSES 1. Precision Engineering 2. Manufacturing Science 3. Production Operation Management 4. Research Methodology



3

3.3 OTHER TEACHING and LEARNING ACTIVITIES

1. Developed the 4th year casting laboratory module, trained foundry personnel on casting

processes with the collaboration of Loughborough University foundry personnel. 2. Developed the Cast Metal Laboratory on ceramic shell investment casting and high-

pressure die casting processes. 4.0 RESEARCH PROJECT SUPERVISION 4.1 FINAL YEAR BACHELOR DEGREE

1. Development of a bench-type injection moulding machine for plastics 2. A study on the effective parameters for precision injection moulding of thermoplastic 3. A study on the effect of investment casting parameter on aluminium-silicon alloy 4. Design and development of an investment casting process mould 5. The effect of gating system parameters on non-ferrous casting 6. The development of a simple/small fuel fired research furnace for non-ferrous alloy

casting 7. A development of ceramic shell building procedure for investment casting process 8. Co-supervisor for the project - ‘Formadability of selected material using 200 tonnes

press machine’. 9. Co-supervisor for the project - ‘The study on material handling aspect in an electronic

company’. 10. Development of a shell casting machine 11. Processing and evaluation of investment cast magnesium-base alloy 12. An Investigation of the cracking of investment casting mould 13. Evaluation and production of shell investment casting mould using alternative material 14. Design of an investment casting wax injection mould 15. Production of green sand mould using alternative material for casting of aluminium

alloy 16. Green sand casting of magnesium alloy 17. Feasibility study of using paraffin wax as a pattern in investment casting 18. Investment casting of magnesium based alloy



4

19. A study on the possibility of using mould inoculation method to grain refine

magnesium based alloy 20. Evaluation of the use of calcium fluoride as an inhibitor in casting of magnesium based

alloy using investment casting process 21. A study of the possibility using organic material to suppress mould-metal reaction in

magnesium investment casting (l) 22. Study of invesment casting wax 23. Grain refinement of an investment cast magnesium based alloy using vibration 24. A study of possibility using organic material to suppress mould-metal reaction in

magnesium investment casting (ll) 25. The processing of a water pump impeller using precision shell investment casting

process (I) 26. The processing of a water pump impeller using precision shell investment casting

process (II) 27. Gravity die casting of ductile iron 28. Aluminium gravity die casting of a compressor component 29. Aluminium green sand casting of a compressor component 30. Optimisation of the investment casting mould production procedures for non-ferrous

alloy 31. Precision Shell Investment Casting of Turbo Charger Impeller. 32. Evaluation and Treatment of Moulding Sand for Green Sand Moulding Process. 33. Evaluation of Carbon Dioxide Moulding sand for Recycling Purposes. 34. Nodularisation of Grey Iron by Ladle Treatment Method. 35. Nodularisation of Grey Iron by the Inmould Method 36. A study on the Effect of Vertical reorientation of the Gating System on the Quality of

an Investment Cast Aluminium Alloy. 37. A Study of the Possibility of Processing semisolid Aluminium Alloy by the Shell

Investment Casting Process. 38. Effect of Different Stucco System on the Strength of Green and Fired Shell Investment

Casting Mould. 39. A Study on the Chip Package Defects Phenomenon on Plastic Transponder at RFID

Production Process, Texas Instruments, Malaysia.



5

40. A Study on Safety Management at the Hand Mount Soldering Unit, Sony EMCS,

Malaysia. 41. Effect of Different Stucco System on Permeability of Green and Fired Shell of an

Investment Casting Mould 42. A Preliminary Study on the Effect of Magnetic Flux on Investment Cast Aluminium

Alloy 43. Properties evaluation of the Shell Investment Casting Mould Mixed with Rice Husk. 44. Analysis of Magnesium Alloy Automotive Component Using Casting Simulation

Package 45. The Effect of Magnetic Flux on Investment Cast Aluminium Alloy 46. Casting Mould Analysis using Casting Simulation Package. 47. Thin Section Casting of Ductile Iron 48. Semi-solid Shell Investment Casting of Aluminium Alloy 49. Shell Investment Casting of Aluminium Alloy 50. Reclaimation of shell investment casting mould material 51. Ceramic Shell Investment Casting Mould Behaviour During Dewaxing Process. 52. The Effect of Magnetic Flux Intensity on the Investment Cast Aluminium Alloy 53. An analysis on the aluminium automotive component using casting simulation package. 54. Investigation on the Quality of hydroxyapatite Adhesion on ceramic shell investment

casting mould. 55. Impact Extrusion of Aluminium Alloy 56. Further Study of Investment Casting Product Quality Produced from ABS Pattern 57. Simulation and verification of automotive component using lost foam casting process 58. In-situ melting of Mg AZ91D 59. Magnesium AZ91D alloy lost foam casting 60. Investigation on the expansion of shell investment casting mould during pouring



6

4.2 MASTER DEGREE

1. The effect of bismuth, strontium and antimony additions on the microstructure and mechanical properties of A356 alumnium casting alloy. (Lee Thuong Thai, 2006)

2. The effect of nodularisation parameters on the quality of ductile iron (Mohd Rashidi

Maarof, 2006) 3. Evaluation of ABS Patterns produced from FDM for investment casting (Wan Sharuzi

Wan Harun, 2007) 4. Thermal analysis of a thin slab casting mould (Zakaria Abas,2007) 5. The effect of pouring temperature on the quality adhesion of hydroxyappetite on 316L

stainless steel. (Amir Fereidouni Lotfabadi, 2008) 6. Lost foam casting of aluminium-silicon (LM6) cast alloy (Alsalihin G. Khalifa, 2009) 7. The effect of heat treatment on the mechanical properties of copper-manganese alloys

for marine applications (Pang Yong Jia, 2009) 8. Lost foam casting of aluminium-silicon (LM6) alloy (Abd. Bashir, 2009) 9. Metal filling characteristics of aluminium lost foam casting (Wong Yun Hong, 2009) 10. Effect of oil palm fibre addition on the mechanical properties of shell mould investment

casting (Soh Wen Hann, 2009) 11. Properties of hot-rolled binary Mg-Ca alloy for use as biodegradable material within

bone (Shariar Koleini, July 2010) 12. Properties of hot extruded binary Mg-Ca alloy for use as biodegradable material within

bone (Mohamed Mishahir, July 2010) 13. Evaluation on significant factors in aluminium lost foam casting using DOE approach

(Amireza Shayganpour, 2010) 14. Effect of flux composition on melting behaviour of magnesium AZ91D alloy

investment casting by in-situ melting technique (Rasoul Sadeghi, 2010) 15. The effect of coconut dust addition on the properties of green sand and investment

casting moulds (Saad Rabia S. Alyam, 2010) 16. Lost foam casting of LM6-Al-Si Alloy Cast under pressure (Ali Asghar Niakan, 2010) 17. Investigation on Al-Mg2Si (MMC) TIG welding (Amirreza Jahangiri, 2010) 18. The effect of calcium content and forging parameters on the properties of

biodegradable Mg-Ca Alloy (Shervin Eslami Harandi, 2010) 19. Properties evaluation of organic binder system for core sand production application

(Latifah Abdullah, 2011)



7

20. Effect on adhesion quality of hydroxyapatite on investment casting mould (Mohd

Zulhafiz Mohamad Zulkifli, 2011) 21. The effect of forging parameters on the properties of biodegradable Mg-0.7Ca alloy for

implant applications (Nur Farah Bazilah Wakhi Anuar, 2012) 22. The effect of rolling temperature on the properties of biodegradable Mg-0.7Ca alloy for

implant application (Mohamad Ridzuan Mohamad Kamal, 2012) 23. Properties of gravity die casting of magnesium and aluminium alloys (Seekayapatteda

Bhupal Kumar, 2012) 24. The effect of surface treatment and electrophoretic deposition on corrosion of

biomaterials (Mahtab Assadian, 2012) 25. Thermal barrier coating on gamma titanium aluminide by EB-PVD (Meysam

Keshavarz, 2012) 26. Effect of zinc addition on the properties of magnesium alloys (Samir Sani Abdul Malik,

2012) 27. Evaluation of ABS hollow and solid pattern for the production of long stem hemy

(Priyadarshini Subramaniam, 2013) 28. Enhancement of the mechanical properties of stainless steel 316L for biomedical

applications (Sasan Vosough Ghanbari, 2013) 29. Effect of nitrogen pressure on Ti/TiAl coating on 304 stainless steel by PVD-DC

magnetron sputtering (Mustafa Muniem Sabar, 2013) 30. High temperature behaviour of NiCoCrAlY coated on Ni-based superalloy with AlN

and AlON diffusion barriers (Amir Mohammad Ali Beik, 2013) 31. Development of iron-niobium-boron based material for hardfacing application (Selvi

Ezhenkowan, 2013) 32. Effect of surface finish and fiting angle on the junction strength of modular biomedical

implant (Mohammad Reza Yavary, 2013) 33. Relationship between microstructure and mechanical properties of nickel-aluminium

bronze alloy solidified at different cooling rate and heat treated (Nurhaulia Razali, 2013)

4.3 PhD DEGREE

1. Development of Mg-Zn alloy as a biodegradable material for biomedical applications (Amir Feredouni, Submitted for review)

2. Investment Casting of Magnesium Based Alloy (Tuty Yasmin Alias) 3. Hydroxyapatite Coating on Investment Cast 316L Stainless Steel for Implant

Applications (Andril Arafat Suhasril)



8

4. Manganese as austenitic matrix stabiliser for ductile iron Ni-resist alloy using in-mould

magnesium treatment method (Mohd Rashidi Maarof-Thesis submitted for review) 5. Process evaluation of an investment casting pattern using rapid prototyping

technology (Omar) 6. Enhancement of Magnesium corrosion resistance for biomedical application (Hamid

Reza Bakhsheshi Rad, Graduated in April 2013) 7. Extraction of precious metal from electronic component using electrodeposition

technique (Mahtab Assadian) 8. Lost foam casting of Aluminium alloy (Majid Karimian-Graduated in 2011) 9. High speed drilling of Al-Si (A383) alloy using carbide tools (Ali Akhavan Farid,

Graduated in 2012) 10. Interaction between Sr, Sb and Bi modifier, and Al-Ti-B refiner in Al-Si cast alloy

(Saeed Farahany, Graduated in July 2012) 11. Precision Investment Casting of Magnesium Alloy by In-Situ Melting. (Hassan Jafari,

Graduated in November 2012) 12. Maerogel coating of Gas Turbine Engine (Intan Syaqirah Bt. Mohd Zulkifli – Oct 2013

- Co-Supervisor) 13. TiON2 coting of CoCrMo for implant applications (Mohd Hazwan B. Hashim – 2013) 14. Investment casting of Aluminium alloy using in-situ melting technique (Nor Aslinda

Salleh – 2013) 15. Friction stir welding of AA6061 Alloy (Mohd Shamsul Hussin – 2013) 16. Alumnium alloy composite (Hamidreza Ghandvar – Oct. 2013) 17. Investment Casting (Yahaya Bashir – Nov. 2013 – Co-Supervisor) 18. CoCrMo machining (Mohd Hainol – July 2013 – Co-Supervisor) 19. Resistance welding of partially biodegradable pin (Ahmad Kafrawi Nasution – Sept.

2013 – Co-supervisor) 4.4 Post Doctoral Supervision

1. Dr. Hassan Jafari (Mar. 2013 - Mar. 2014) 2. Dr. Saeed Farahany (Feb. 2013 – Feb. 2014) 3. Dr. Hamidreza Bakhsheshi – Junior visiting researcher (15 April – 15 July 2013)



9

5.0 RESEARCH AND CONSULTANCY: 5.1 RESEARCH AND CONSULTANCY (Technical)

1. Technical proposal - Plant layout and equipment selection Mssrs Quadtrol Sdn Bhd, Bukit Rambai Ind. Estate, Melaka

2. Technical proposal - Equipment assesment for plastic injection moulding company,

Cherry Sweet Sdn. Bhd 3. Calibration of Venier Caliper and Digimatic Caliper for Concrete Engineering Products

Ltd. 4. Research on the Evaluation and Processing of Investment Cast Magnesium-base alloy,

1994-1995 5. Technical proposal - Setting up of water pump assembly factory for Syarikat Rahman

Brothers Sdn. Bhd., Johor Bahru, Johor. 6. Technical Proposal - Setting up of a metal stamping factory for Wira Skills Sdn. Bhd,

Puchong Light Industrial Estate, Puchong, Selangor. 7. Technical advice on manufacture of pulley casting pattern and casting of power

steering cover mould for Sapura Technical Centre, Bangi Industrial Estate, Selangor.

8. Cost implication proposal for the setting up of a Composite Bicycle manufacturing facilities for the Composite Research Group, UTM.

9. Research on the processing of Magnesium-base alloy using the ceramic shell

investment casting process - UPP grant worth of RM20,000 vot.no. 71244 10. Development of an experimental upsetting die - UPP Grant worth of RM5000 11. Technical Proposal - Procurement of Rapid Prototyping facilities for Bureau of

Research and Consultancy, University Technology Malaysia. 12. Research on ‘Quality optimisation of precision cast magnesium - base alloys for

aerospace applications’- IRPA grant worth of RM519,476 project no: 03-02-06-0202, Project leader Dr. Ali Ourdjini

13. Research on ‘Development of thin-wall ductile iron casting for automotive application’.

IRPA grant worth of RM188,000, vote no:74014, Project leader Dr. Ali Ourdjini. 14. Research on ‘NGV refuelling facilities and equipment’. IRPA grant worth of

RM5,015,760, vote no:74536, Project leader Prof. Dr. Mohd Nor Musa. 15. Research on ‘Development of fuel cell powered automobile thermal comfort and

refrigeration’. IRPA grant worth of RM2,001,000, vote no:74522, Project leader Prof. Dr. Mohd Nor Musa.

16. Research on ‘ Optimisation of the Investment Casting Mould Production Procedure for

Non-ferrous Alloys’. RMC grant worth of RM18,800, vote no. 75063, Project leader Dr. Nazri Kamsah



10

17. Research on ‘ Precision Shell Investment Casting of Aluminium Alloy Turbo Charger Impeller’. IRPA grant worth of RM172,000, vote no:74273, Project leader Dr. Mohd Hasbullah Idris

18. Short lecture on ‘ The Market Opportunity for Foundry Industry in Malaysia’,

Production Laboratory, in conjunction with the visit of UK counterpart under the CICHE/HED, Foundry Engineering 639, September 1997.

19. Research on ‘ Establishing the Quality of Hydroxiapetite on medical grade implant

using Investment casting Process, e-science grant worth of RM381,000, vote no:79132, Project leader Assoc. Prof. Dr. Mohd Hasbullah Idris

20. Project on ‘Training & Development of Operation and Maintenance System at Juaseh

and Sg. Lebam Water Supply Dam for SAJ Holdings Sdn Bhd. Vote no: 21. Research on ‘Development of Mg-Ca alloy for bone scalfolding, e-science grant worth

of RM252,000, vote no: 79360. Project leader Dr. Mohd Hasbullah Idris 22. Research on ‘Fundamental Study of Difussion Process for Hydroxyapatite Coating

Methods on Biometallic Implant Using Investment Casting Technique’ Fundamental Research Grant Scheme worth RM52,000. vote no: 78610. Project Leader Assoc. Prof. Dr. Mohd Hasbullah Idris

23. Research on ‘Electrophoretic Nano Hydroxyapatite Coating on Mg-1.0Ca Alloys for

Surgical Implant Applications‘ Research University Grant worth RM150,000. Vote no. PY/2011/01269, Project Leader Assoc. Prof. Dr. Mohd Hasbullah Idris

24. Research on ‘Design and Simulation of Racquet-Based Sports Equipment’ Research

University Grant Flagship worth RM595,800. Vote no. PY/2011/01901, Project Leader Assoc. Prof. Dr. Mohammad Rafiq Abd. Kadir

25. Research on ‘Corrosion and Mechanical Properties Investigation of Nanostructured

Composite Ceramics Coating on superalloys material for aerospace applications’ Grant worth RM77,000 Vote no. FRGS/2/2013/TK04/UTM/02/16), Project Leader Dr. Azizi Mat Yajid.

26. Research on ‘Magnesium Alloys Shell Investment Casting by In-Situ Melting

Technique’ Research University Grant worth RM195,500. Vote no. PY/2012/00575 Project Leader Prof. Dr. Mohd Hasbullah Idris

5.2 COURSES CONDUCTED

5.2.1 ISO 9000 Quality Management System

1. Internal auditor (2nd party auditor) for the Sultanah Zanariah Library, UTM, Skudai ISO 9002:1994 certification execise, 4th and 5th Feb. 1998

2. Facilitator for documentation of Manual Quality, for the Academic Office, Faculty of

Civil Engineering, UTM, Skudai, ISO 9002:1994 certification exercise, March, 1998 3. Facilitator for documentation of Procedures, for the Academic Office, Faculty of Civil

Engineering, UTM, Skudai, ISO 9002:1994 certification exercise, 22nd-25th April,1998



11

4. Facilitator for documentation of Work Instructions for the Academic Office, Faculty of Civil Engineering, UTM, Skudai, ISO 9002:1994 certification exercise, 8th-9th, May,1998

5. Facilitator for the Development of UTM Quality Policy and Objectives Workshop, 7th

May, 1998 6. Course facilitator for Internal Audit course - Civil Engineering Faculty, UTM, Skudai

ISO 9002:1994 certification exercise. 20th and 21st October 1998 7. Workshop facilitator for the UTM Teaching and Learning Workshop, 16th and 17th

November 1998. 8. Short Awareness Lecture on ISO 9000 for the 3rd, 5th year Bachelor Degree and

Master Degree students, Faculty of Mechanical Engineering, UTM, 24th November, 1998.

9. ISO 9000 Awareness Workshop facilitator for the Research Management Centre

(RMC), Dewan Jumaah, UTM, 17th and 18th December, 1998. 10. ISO 9002 Internal Auditor (2nd party auditor) for the Civil Engineering Faculty,

UTM, Skudai ISO certification exercise. 2nd to 4th February 2000 11. ISO 9002 Internal Auditor (2nd party auditor) for the Sultanah Zanariah Library,

UTM, Skudai ISO certification exercise. 1st to 29th February 2000 12. ISO 9002 Internal Auditor (2nd party auditor) for the Civil Engineering Faculty,

UTM, Skudai ISO surveillance audit exercise. 2nd to 4th February 2001 13. ISO 9002 Internal Auditor (2nd party auditor) for the Sultanah Zanariah Library,

UTM, Skudai ISO reassessment audit exercise. 2nd Feb to 1st March 2001 14. ISO 9001:2000 Internal Auditor (2nd party auditor) for the Sultanah Zanariah

Library, UTM, Skudai ISO recertification audit exercise. 1st to 24th April 2002 15. ISO 9002 Internal Auditor (2nd party auditor) for the Civil Engineering Faculty,

UTM, Skudai ISO surveillance audit exercise. 24th Oct. 2002 16. ISO 9001:2000 Facilitator for Development of Quality Management System for

Showa Electronic Supplies Sdn Bhd, Upgrading exercise, Tampoi Industrial Estate, Johor Bharu, Johor.

17. ISO 9001:2000 Awareness Course facilitator for Showa Precision Sdn Bhd, Pasir

Gudang Industrial Estate, Johor Bharu, Johor. 18. ISO 9001:2000 Awareness Course facilitator for PN Plus Sdn Bhd, Desa Cemerlang

Industrial Estate, Johor Bharu Johor. 19. ISO 9000:2000 Awareness Course facilitator for Chang Huat Plastic Sdn Bhd, Muar,

Johor. 20. ISO 9001:2000 Internal Auditor (2nd party auditor) for the Universiti Pendidikan

Sultan Idris Library (UPSI), ISO certification audit exercise. 2002.



12

21. ISO 9001:2000 Internal Auditor (2nd party auditor) for the Tun Hussein Onn Library,

Sunway College and Monash University Malaysia, certification audit exercise. 15th and 16th July 2002.

22. ISO 9001:2000 Internal Auditor (2nd party auditor) for theTun Hussein Onn Library,

Sunway College and Monash University Malaysia, certification audit exercise. 13th and14th Sept. 2002.

23. ISO 9002 Internal Auditor (2nd party auditor) for the Civil Engineering Faculty,

UTM, Skudai ISO Surveillance audit exercise. 24th Oct. 2002 24. Lecture on ‘Management and Maintenance of ISO 9001:2000 Quality Management

System for the Faculty of Built Environment’, FAB Seminar Hall, UTM Skudai. Johor 28th Dec. 2002.

25. ISO 9001:2000 Course facilitator: documentation for the Faculty of Civil Engineering,

UTM, Skudai, upgrading exercise from ISO 9002: 1994 to ISO 9001:2000 exercise, 19-22nd January 2003.

26. ISO 9000:2000 Awareness Course facilitator for the Faculty of Mechanical

Engineering, UTM, Skudai. De’ Costa Hotel, Melaka, 17th and 18th February 2003. 27. ISO 9001:2000 Internal Quality Audit Course for the Faculty of Built Environment’,

FAB Seminar Hall, UTM Skudai. Johor 24th March. 2003. 28. Internal auditor (2nd party auditor) and advisor for the Perpustakaan Sultanah

Zanariah, UTM, Skudai ISO 9001: 2000. Surveillance Audit exercise, 10th –24th. April.2003.

29. ISO 9001:2000 Internal Auditor (2nd party auditor) for the Tabung Haji Plantation

Palm Oil Mill, Bukit Lawiang, Kluang, Johor, ISO certification audit exercise. 28th and 29th April. 2003.

30. ISO 9001:2000 Internal Auditor (2nd party auditor) for the Computer Centre, UTM,

ISO certification audit exercise. 2003. 30th April. 2003. 31. ISO 9001:2000 Internal Auditor (2nd party auditor) for Pejabat Harta Bina, UTM, ISO

certification audit exercise. 2nd, 8th and 9th May. 2003. 32. ISO 9001:2000 Awareness and Internal Audit course for the International Islamic

University Library. ISO certification exercise. 19th – 23th May 2003 33. ISO 9001:2000 Awareness course for the Registrar Office (Human Resource

Management and Academic Management Unit), UTM, Skudai. 14th and 15th June. 2003 34. ISO 9001:2000 Internal Quality Audit Course for the Faculty of Business and

Economic Environment’, Universiti Pendidikan Sultan Idris (UPSI), Tanjung Malim, Perak. ISO certification audit exercise. 2nd, 3rd and 4th July. 2003.

35. ISO 9001:2000 Course facilitator: documentation for the Registrar Office, UTM,

Skudai. 6th - 8th January 2004



13

36. ISO 9001:2000 Course facilitator: documentation for 6 management procedures for

the Registrar Office, UTM, Skudai. 9th October 2003 37. ISO 9001:2000 Workshop facilitator: Manual Quality documentation for the Registrar

Office, UTM, Skudai. 13th October 2003. 38. ISO 9001:2000 Internal Auditor (2nd party auditor) for the Civil Engineering Faculty,

UTM, Skudai ISO Recertification audit exercise. 15th-2 October 2003 40. ISO 9001:2000 Awareness course for the Registrar Office (Human Resource

Development Unit), UTM, Skudai. 10th November 2003. 41. ISO 9001:2000 Awareness course for the support staffs of the Registrar Office, UTM,

Skudai. ISO certification exercise. 15th January, 2004 42. Internal auditor (2nd party auditor) and advisor for the Perpustakaan Sultanah

Zanariah, UTM, Skudai ISO 9001: 2000. Recertification Audit exercise, 16th –30th. January 2004.

43. ISO 9001:2000 Workshop facilitator: Documentation for the Registrar Office, UTM,

Skudai. Vistana Hotel and Residences, Kuala Lumpur. 21st - 24th January 2004. 44. ISO 9001:2000 Internal Audit course for the Registrar Office, UTM, Skudai. 24th and

25th February 2004 45. ISO 9001:2000 Internal Auditor (2nd party auditor) for Sultanah Zanariah Library,

UTM, Skudai ISO Surveillance audit exercise. 22nd -23rd July 2004 46. ISO 9001:2000 Awareness course for Tabung Haji – Depositing Unit. Mint Hotel,

Kuala Lumpur 15th and 16th May. 2004 47. ISO 9001:2000 Awareness course for Tabung Haji – Management of Pilgrimage Unit.

De Palma Hotel, Ampang, Kuala Lumpur. 12th and 13th June. 2004. 48. ISO 9001:2000 Workshop facilitator: Documentation for the Tabung Haji –

Management of Pilgrimage Unit. 19th and 20th June. 2004. Port Dickson. Negeri Sembilan

49. Consultant for the development of QMS ISO 9001:2000 Tun Abd Razak Library,

Universiti Teknologi MARA, Shah Alam Selangor. 2005 50. Consultant for the development of QMS ISO 9001:2000 Magajin Sapurai (M) Sdn.

Bhd. Pasir Gudang Industrial Estate, Pasir Gudang, Johor, 2005 51. ISO 9001:2000 Internal Audit course for the Felda Rubber Product, Pasak, Kota

Tinggi , Johor, 2005 52. ISO 9001:2000 Internal Auditor (2nd party auditor) for Sultanah Zanariah Library,

UTM, Skudai ISO Surveillance audit exercise. July 2005 53. Internal auditor (2nd party auditor) and advisor for the Perpustakaan Sultanah

Zanariah, UTM, Skudai ISO 9001: 2000. Surveillance Audit exercise, Dec. 2005.



14

54. Facilitator for procedures review exercise, Faculty of Civil Engineering, UTM,

Skudai, ISO 9001:2000, Reviera Hotel, Melaka 2005 55. Lead Internal auditor (2nd party auditor) for the Faculty of Civil Engineering, UTM,

Skudai, ISO 9001: 2000. Surveillance Audit exercise, Sept.2005. 56. Internal Auditor for UTM Audit Programme (Academic Quality Programme) –

Faculty of Management and Human Resource Development, 14 – 15th February, 2006. 57. Facilitator and Speaker for the ‘Bengkel Kaedah Pengauditan Audit Dalam Bagi Staf

PSZ’, PSZ, UTM, Skudai. Johor. 20th July. 2006. 58. Facilitator and Speaker for the ‘Bengkel Audit Dalaman ISO Untuk Pejabat

Bendahari’, Pejabat Bendahari, UTM, Skudai. Johor. 22nd July. 2006. 59. Speaker for the talk on ‘Understanding Quality Manual and Consistency in

Maintaining Standards’, Kulliyah of Architecture and Environmental Designs Islamic Enhancement Programme 2006, Kulliyah of Architecture and Environmental Designs, International Islamic University, Briefing Room, Level 4, KAED, 17th August 2006.

60. Internal auditor (2nd party auditor) for the Faculty of Civil Engineering, UTM, Skudai

ISO 9001: 2000. Surveillance Audit exercise, 22nd June - 3rd August 2006. 61. Facilitator for the ISO 9001:2000 Documentation Review, Faculty of Civil

Engineering, UTM. Tanjung Puteri Golf Resort, Pasir Gudang, Johor. 7-9th September. 2006

62. Facilitator and speaker for Academic Audit Course, Faculty of Education, Universiti

Teknologi Malaysia, Skudai, Johor. Hyatt Regency Hotel, 26-27 November 2006. 63. Speaker on ‘Quality and Productivity’ Induction Course series 1/2006 for the

Management and Professional and Support Staff Groups. Universiti Teknologi Malaysia

64. Speaker on ‘Quality and Productivity’ Induction Course series 2/2006 for the

Management and Professional Groups. Universiti Teknologi Malaysia. 65. Internal auditor (2nd party auditor) and advisor for the Perpustakaan Sultanah

Zanariah, UTM, Skudai ISO 9001: 2000. Surveillance Audit exercise, March.2007. 66. Speaker on ‘Quality and Productivity’ Induction Course series 1/2007 for the

Management and Professional and Support Staff Groups. Universiti Teknologi Malaysia.

67. Speaker on ‘Quality and Productivity’ Induction Course series 2/2007 for the

Management and Professional Groups. Universiti Teknologi Malaysia. 68. Internal auditor (2nd party auditor) for the Faculty of Civil Engineering, UTM, Skudai

ISO 9001: 2000. Surveillance Audit exercise, August, 2007. 69. Facilitator for the ISO 9001:2000 Document Review for the Faculty of Civil

Engineering, UTM. Quality Hotel, Kuala Lumpur. 14th -17th December 2007.



15

70. Speaker on the ISO 9001:2000 Awareness and Internal Audit Refresher course for

Tanjung Puteri Golf Resort, Pasir Gudang, Johor. 12-13 November 2007. 71. Internal auditor (2nd party auditor) for the Faculty of Civil Engineering, UTM, Skudai

ISO 9001: 2000. Surveillance Audit exercise, 16th June – 4th July, 2008 72. Speaker on the ISO 9001:2000 Awareness course for the Faculty of Civil Engineering,

UTM, Skudai, Johor. Convention Centre, Sofitel Palm Resort, Senai, 18th June 2008. 73. Speaker on the ISO 9001:2000 Awareness and Internal Audit Refresher course for IR

Engineering, Pontian, JOHOR. 74. Internal auditor (2nd party auditor) for the Faculty of Civil Engineering, UTM, Skudai

ISO 9001: 2008. Surveillance Audit exercise, July, 2010. 75. Consultant for the development of QMS ISO 9001:20008 Bumiwangsa Plant and

Process Equipment Sdn. Bhd. (BWPPE) Sri Alam Industrial Estate, Johor, 2010. 76. ISO 9001:20008 Awareness course for Bumiwangsa Plant and Process Equipment

Sdn. Bhd. (BWPPE) Sri Alam Industrial Estate, Johor, 28th Februari 2010. 77. Consultant for conducting of internal audit and preparation of Management Review

Report QMS ISO9001:2008 and EMS ISO140001 for Todai (M) Sdn. Bhd. 10th & 11th May and 18th & 19th June, 2010.

78. ISO 9001:20008 Awareness course for the School of Postgraduates Studies (SPS),

Universiti Teknologi Malaysia, Skudai, Johor, SPS Seminar Room, 19th May 2010. 79. ISO 9001:20008 Documentation workshop facilitator for the School of Postgraduates

Studies (SPS), Universiti Teknologi Malaysia. Kukup Golf Resort, Penerok, Pontian Johor 23th June 2010.

80. ISO 9001:20008 Briefing for Group A, B, C and D staff of the Pejabat Harta Bina,

Universiti Teknologi Malaysia, Skudai, Johor, Centre for Teaching and Learning Lecture Hall, 1st June 2010.

81. ISO 9001:20008 Documentation (Core business process mapping, development of

quality policy and objectives and procedures integration) for the Pejabat Harta Bina, Universiti Teknologi Malaysia, Skudai, Johor, Seroja Hall, Rumah Alumni, UTM Johor Bharu. 24th -25th August 2010.

82. Speaker for ISO 9001:20008 Internal Audit Course for the Innovation and

Consultancy Centre, Universiti Teknologi Malaysia, Skudai, Johor, ICC Seminar Room, May 2010.

83. Speaker and facilitator for the ISO 9001:20008 documentation workshop for the

School for Professional and Continuing Education (UTMSPACE), Grand Paragon Hotel, Johor Bharu. 14thth – 17th May 2010

84. Speaker and facilitator for the ISO 9001:20008 documentation workshop for the

School for Professional and Continuing Education (UTMSPACE), Goodhope Hotel, Skudai, Johor 21st – 23rd May 2010



16

85. ISO 9001:20008 Awareness course for Antara Steel Sdn. Bhd. Pasir Gudang

Industrial Estate 23rd July 2010 86. Speaker and facilitator of the ISO 9001:20008 documentation workshop for the

Innovation and Consultancy Centre, Universiti Teknologi Malaysia, Skudai, Johor, ICC Seminar Room, 7th- 8th October 2010

87. Speaker for ISO 9001:20008 Internal Audit Course, Professional Development

Programme (UTM Degree++), Lecture Room 5, FSKSM, UTM Johor Bharu. 24th-25th July 2010

88. Speaker for ISO 9001:20008 Quality Management System Course, Professional

Development Programme (UTM Degree++), Bestari Room 3, D07 CICT UTM Johor Bharu. 31st July-1st August 2010

89. Speaker for ISO 9001:20008 Quality Management System Course, Professional

Development Programme (UTM Degree++), Bestari Room 3, D07 CICT UTM Johor Bharu. 7th-8th August 2010


Programme (UTM Degree++), Bestari Room 3, D07 CICT UTM Johor Bharu. 14th-15th August 2010


Programme (UTM Degree++), Bestari Room 3, D07 CICT UTM Johor Bharu. 22nd-23rd August 2010.

92. ISO 9001:20008 Internal Audit course for Antara Steel Sdn. Bhd. Pasir Gudang

Industrial Estate 2nd Sept. 2010 93. Facilitator for the ISO9001:2008 Teaching and Learning Documentation Review,

Faculty of Civil Engineering. Everly Resort Hotel, 10Km Jalan Tanjung Kling, Melaka. 19th-22nd November 2010.

94. Facilitator for the ISO9001:2008 Documentation (Manual quality and 6 procedures

required by the Standard). Banquet Hall, Dewan Sultan Iskandar UTM Johor Bharu. 11th,12th and 15th November 2010.

95. ISO9001:2008 Internal Auditor for the surveillance audit exercise Faculty of Civil

Engineering, UTM Johor Bharu. 1st May – 31st December 2010. 96. ISO 9001:20008 Awareness course for the School for Professional and Continuing

Education (UTMSPACE), Universiti Teknologi Malaysia, Skudai, Johor, UTMSPACE Seminar Room, 26th Jan 2011

97. ISO 9001:20008 Internal Audit course for Wentel Corporation Sdn. Bhd. Tebrau

Industrial Estate 26th February. 2011 98. Facilitator for Innovation and Commercialisation ISO 9001:2008 Continual

Improvement Workshop 26th-27th May 2011



17

99. Speaker for ISO 9001:20008 Internal Audit Course, Office of the Asset Management, UTM. 23rd-24th June 2011

100. Internal Auditor for The Faculty of Civil Engineering 2011 Audit Exercise.19th May-

31st Dis 2011 101. Speaker for ISO 9001:20008 Awareness Course for UTM Laboratory Staff, Office of

the Laboratory Management, UTM. Seminar Room 2, UTM Training Centre. 24th -25th Mar 2011

102. Speaker for ISO 9001:20008 Awareness Course for UTM Laboratory Staff, Office of

the Laboratory Management, UTM. Seminar Room 1&2, UTM Razak School, UTM International Campus ,Kuala Lumpur. 18th -19th May 2011

103. Speaker for the UTM Skill Professional Certificate. ISO9001:2008 Quality

Management System Course, Room 105, Block C-17, Faculty of Science. 12th -13th Feb 2011

104. Speaker for the UTM Skill Professional Certificate. ISO9001:2008 Audit Course,

Seminar Hall, Mechanical Engineering Faculty. 19th-20th Feb 2011 105. Speaker for the UTM Professional Skill Certificate. ISO9001:2008 Audit Course,

Room 416, Block D2 , Civil Engineering Faculty. 19th-20th Mac 2011 106. Speaker for the UTM Professional Skill Certificate. ISO9001:2008 Quality

Management System Course, Faculty of Civil Engineering. 12th -13th Mar 2011 107. Speaker for the UTM Professional Skill Certificate. ISO9001:2008 Quality

Management System Course, Room 108, Block C24, Mechanical Engineering Faculty 22nd-23rd Jan 2011

108. Speaker for the UTM Professional Skill Certificate. ISO9001:2008 Quality

Management System Course, UTMSPACE. 8th-9th Okt 2011 109. Speaker for the ISO 9001:2008 Awareness course Seminar Room UTMSPACE. 26th

Jan 2011 110. ISO 9001:20008 Internal Audit Refresher course for Bumiwangsa Plant and Process

Equipment Sdn. Bhd. (BWPPE) Sri Alam Industrial Estate, Johor, 9th -10th Februari 2012.

111. ISO9001:2008 Internal Audit Course Faculty of Civil Engineering, UTM Johor

Bharu. 9th April 2012. 112. ISO9001:2008 Awareness Course Faculty of Civil Engineering, UTM Johor Bharu.

27th - 28th Feb. 2012. 113. ISO9001:2008 Awareness Course Zarafood Sdn Bhd, Larkin, Johor Bharu. 20th March.

2012. 114. ISO9001:2008 Awareness Course (Public Course for Antara Steel Sdn Bhd &

Nishinihon Sdn Bhd) The Zon, stulang Laut Johor Bahru. 12th-13th April 2012



18

115. ISO9001:2008 Internal Audit Course for Office of the Registrar, UTM Johor Bharu. 10th & 11th May 2012.

116. Facilitator for ISO 9001:2008-MQA Document Revision Workshop, Politeknik Ungku Omar, Ipoh, Perak, 4th – 7thJuly 2012

117. Facilitator for ISO 9001:2008-MQA Document Preparation, Politeknik Ungku Omar,

Ipoh, Perak, 31st Sept- 2nd Oct. 2012 118. 2nd Party auditor for ISO9001:2008 Audit Exercise, Politeknik Ungku Omar, Ipoh,

Perak, 5th-7th November 2012

119. ISO9001:2008 Internal Audit Course Zarafood Sdn Bhd, Larkin, Johor Bharu. 4th December. 2012.

120. 2nd Party auditor for ISO9001:2008 Audit Exercise, Innovation and

Commercialisation Centre, UTM, 10th -20th June 2013 121. Speaker for the UTM Skill Professional Certificate. ISO9001:2008 Quality

Management System Course, Block B08, Faculty of Geoinformation and Property Management. 2nd -3rd March 2013


Management System Course, Lecture Hall 10, Block B08, Faculty of Geoinformation and Property Management. 9th -10th March 2013.

123. Facilitator for ISO 9001:2008-Review of the Quality Manual ISO9001:2008, Faculty

of Civil Engineering, UTM. 18th April. 2013 124. Speaker for the UTM Skill Professional Certificate. ISO9001:2008 Quality

Management System Course, Block B08, Faculty of Geoinformation and Property Management. 21st -22nd Sept. 2013


Management System Course, Block B08, Faculty of Geoinformation and Property Management. 28th-29th Sept. 2013


Management System Course, Block B08, Faculty of Geoinformation and Property Management. 7th -8th Dec. 2013

127. Speaker for the ISO9001:2008 Awareness Course, Faculty of Civil Engineering, PBL

Room 1, Block M46, Faculty of Civil Engineering, UTM 27th March 2013.

128. Speaker and facilitator for the ISO9001:2008 Internal Quality Audit Course, Halex Industries Sdn Bhd. Lot Ptb 264, Jalan Mutalib1, Kawasan Industri Bandar Tenggara, 81000 Kulai, Johor. 28th February 2013.

129. Speaker for the ISO9001:2008 Awareness Course, Inolux Sdn Bhd. No. 3, Jalan Belati

2, Taman Perindustrian Maju Jaya, 81300 Skudai, Johor. June 2013.



19

130. Speaker and facilitator for the ISO9001:2008 Internal Quality Audit Course, Chosen Manufacturing Sdn Bhd. Jalan Firma 3, Kawasan Perindustrian Tebrau IV, 81100 Johor Bahru, Johor. July 2013.

131. Speaker and facilitator for the ISO9001:2008 Internal Quality Audit Course, AB Technology (M) Sdn Bhd. Lot 11, Kawasan Perindustrian Lukut, 81900 Kota Tinggi, Johor. November 2013.

132. Speaker and facilitator for the ISO 9001:20008 Internal Quality Audit Course for

Antara Steel Sdn. Bhd. Pasir Gudang Industrial Estate 12th-13th Feb. 2014.

5.2.2 Academic Quality Assurance and Related Quality Activities

1. Facilitator for the Faculty of Mechanical Engineering development of Quality Assurance documentation for the Ministry of Education accreditation exercise, 2003

2. Speaker and Facilitator for Preparation of Quality Assurance Pangkalan Data Exercise

for the Teachers Training Division, Ministry of Education. 4th – 6th Dec. 2007. Port Dickson, Negeri Sembilan.

3. LAN Quality Assurance Acreditation Exercise for Masters of Science in

Mechanical Engineering, Universiti Teknologi Petronas, Bandar Seri Iskandar, Tronoh, Perak

4. LAN Quality Assurance Acreditation Exercise for Diploma in Mechanical

Engineering, S.I.T International College, Paras 5, Klang Parade, 2112 Jalan Meru, 41050 Klang, Selangor Darul Ehsan

5. LAN Quality Assurance assessor for the Diploma in Mechanical

Technology, Terengganu Advance Technical Institute (TATI), Kemaman, Terengganu

6. LAN Quality Assurance assessor for the Diploma in Production Technology

(Tool and Die Making), Technology Park Malaysia Academy (TPM Academy), Kuala Lumpur.

7. LAN Quality Assurance assessor for the Certificate in Production

Technology (Tool and Die Making), Technology Park Malaysia Academy (TPM Academy), Kuala Lumpur.

8. LAN Quality Assurance Accreditation asessor for the Bachelor of

Engineering Technology (Product Design), UniKL, Kuala Lumpur. 9. LAN Quality Assurance Accreditation assessor for the Bachelor of

Engineering Technology (Hons) (Tool and Die), UniKL, Kuala Lumpur.



20

10. LAN Quality Assurance Accreditation assessor for the Diploma of Technology (Tool and Die), Malaysian German Institute (GMI), Kuala Lumpur.

11. LAN Quality Assurance Accreditation assessor for the Diploma of Technology

(Product Design), Malaysian German Institute (GMI), Kuala Lumpur. 12. LAN Quality Assurance Documentation assessor for the Diploma in Mechanical

Engineering, Institute Teknologi Midas 13-A-01, City Plaza, Jalan Tebrau 80250 Johor Bahru Johor Darul Takzim

13. LAN Quality Assurance Documentation assessor for the Diploma in Mechanical

Engineering, Institute Teknologi Midas, Seremban, Negeri Sembilan, Darul Khusus. 14. LAN Quality Assurance Accreditation assessor for the Diploma in Mechanical

Engineering, Kolej Antarabangsa Nilai, No. 1, Persiaran Kolej BBN 71800 Bandar Baru Nilai, Negeri Sembilan Darul Khusus.

15. Speaker for the MARA Engineering Materials Course, Industrial Laboratory,

Faculty of Mechanical Engineering, UTM. 3-7 July, 2006. 16. Facilitator and speaker for the Universiti Tun Hussein Onn Academic Quality

Audit Course, Caterina Hotel, Batu Pahat, Johor. 14th-17th July 2007. 17. Facilitator and speaker for the UTM Academic Quality Audit Course, Mahkota

Hotel, Melaka, 27th-29th July 2007. 18. Facilitator for the Outcome Based Education Workshop, Equitorial Hotel, Kuala

Lumpur. 20th – 21st November 2007. 19. Facilitator and speaker for the Academic Quality Audit Course, Faculty of

Science, Universiti Teknologi Malaysia, Skudai, Johor. Puteri Pacific Hotel, 24th-26th October 2007.

20. Facilitator and speaker for the Preparation of Quality Assurance Pangkalan Data

Workshop, Universiti Teknologi MARA. 26th – 28th Dec. 2007. Universiti Teknologi MARA, Shah Alam, Selangor D.E.

21. Facilitator and speaker for the Academic Quality Audit Course, Faculty of

Engineering and Science Geoinformation, Universiti Teknologi Malaysia, Skudai, Johor. Sofitel Hotel and Golf Resort, 7th -8th October 2007.

22. Facilitator for the Academic Quality Audit Exercise, Faculty of Engineering and

Science Geoinformation, Universiti Teknologi Malaysia, Skudai, Johor. 15th – 16th January 2008


Exercise for Institut Perguruan Tengku Ampuan Afzan,Ministry of Education, Grand Continental. Kuantan Pahang


Exercise for Institut Perguruan Batu Lintang, Ministry of Education, The Zone, Johor Bharu, JOHOR



21

25. Facilitator and speaker for the Preparation of Quality Assurance Pangkalan Data Exercise for Institut Perguruan Perempuan Melaka, Ministry of Education, Tiara Beach Resort, Port Dickson, Negeri Sembilan


Exercise for Institut Perguruan Keningau, Ministry of Education, Dynasty Hotel, Kota Kinabalu, Sabah.


Exercise for Institut Perguruan Tawau, Ministry of Education, Sabah. 28. 2nd party auditor on BATC Training Providers – Oxford Corporate Consultants

and Trainers Sdn. Bhd., P-3-9, Plaza Damas, Jalan Sri Hartamas 1, 50480 K.Lumpur. 27th May 2008.

29. 2nd party auditor on BATC Training Provider – Rivermore Consult Sdn. Bhd.,

No7-3, Jalan 5/109F, Plaza Danau 2, Taman Danau Desa, 58100 K.Lumpur. 27th May 2008.

30. Speaker on Academic Auditing course for the EAC accrediting exercise Dewan

Sultan Iskandar. UTM, Skudai, Johor. 25th May 2009 31. Speaker and facilitator for MQA Internal Audit Exercise. Teachers Training

Institute, Darul Aman Campus, Alor Setar, Kedah. July 2009, Regency Hotel, Alor Setar, Kedah.

32. Speaker and facilitator for Documenting of MQA Self-Review Report. Teachers

Training Institute, Dato’ Razali Ismail Campus, Kuala Terengganu. 9-11 August 2009, Shaza Inn, Kuantan Pahang.

33. Speaker and facilitator for MQA Internal Audit Exercise. Teachers Training

Institute, Rajang Campus, Sibu, Sarawak. 16-19 August 2009, RH Hotel, Sibu, Sarawak 34. Speaker and facilitator for Documenting of MQA Self-Review Report. Teachers

Training Institute, Temenggong Ibrahim Campus, Johor Bharu. 19-21 August 2009, Katerina Hotel, Batu Pahat, Johor.

35. Speaker and facilitator for Documenting of MQA-02 documentation for the

Faculty of Biosciences and Bioengineering. Pulai Desaru Hotel Beach Resort, Kota Tinggi, Johor. 22nd November 2009.

36. Speaker and facilitator for Review and Documentation of Faculty of Mechanical

Revised Curriculum, Seminar Hall, Faculty of Mechanical Engineering, UTM. 18th-19th February 2010.

37. Speaker and facilitator for MQA Internal Audit Exercise. Teachers Training

Institute, Kota Bharu Campus, Kota Bharu, Kelantan. May 2010, 38. Speaker and facilitator for MQA Awareness course. Kumpulan Pendidikan

Yayasan Pelajaran Johor (KPYPJ), Johor Bahru, Johor. 24th & 25th June 2010. 39. Speaker and facilitator for MQA Awareness course for Department of

Polytechnics, Malaysia (Civil Engineering, Accounting, Hospitality and Business Programmes), Empress Hotel, Sepang, Selangor, 27-29 July. 2010



22

40. Auditor for Foundation in Mechanical Engineering Universiti Tenaga nasional (UNITEN), Kampus Putrajaya, Kajang, Selangor. 2nd -3rd August 2010

41. Speaker and facilitator for MQA Awareness course for Department of

Polytechnics, Malaysia (Mechanical Engineering). Permaisuri Resort, Port Dickson, Negeri Sembilan. 4th - 6th August. 2010


Polytechnics, Malaysia (Mechanical Engineering). Politeknik Merlimau. Melaka 29th

September – 1st October 2010 43. Speaker and facilitator for MQA Awareness course for Department of

Polytechnics, Malaysia (Electrical Engineering). Pearl International Hotel. 11th - 14th October. 2010


Polytechnics, Malaysia (Supporting Programmes). Ancasa Hotel & SPA. 1st - 4th November. 2010

45. Speaker and facilitator for Academic Audit course for Department of

Polytechnics, Malaysia (Mechanical Engineering). The Heritage Hotel, Ipoh, Perak. 22nd - 25th November. 2010

46. Speaker and facilitator for Academic Audit course for Department of

Polytechnics, Malaysia (Electrical Engineering). Quality Hotel, Shah Alam, Selangor. 29th November – 2nd December. 2010

47. Speaker and facilitator for Sarjana Muda Reka Bentuk Industri, Razak School of

Eng. and Advanced Technology curriculum review based on MQA requirements. M-Suite Hotel, Johor Bharu. 15-17 Oct. 2010

48. Speaker for MQA Awareness course for the School for Professional and

Continuing Education (UTMSPACE), Universiti Teknologi Malaysia, Skudai, Johor, UTMSPACE Seminar Room, 31st Jan 2011

49. Facilitator & speaker for Academic Audit Course, Politeknik Merlimau. Melaka,

11th – 14th April 2011 50. Reviewing exercise for the Diploma in Casting Technology (Expandable

Mould)) & (Permanent Mould) programmes, Institut Kemahiran Belia Negara Temerloh, Lanchang, Pahang, 25th-26th April 2011.

51. Facilitator for Preparation of MQA-01 Documents –Diploma Eksekutif UTM

Razak School, Concorde Hotel, KLIA, Sepang Selangor. 5th-6th May 2011 52. Facilitator & speaker for Academic Audit Course, Politeknik Kuala Terengganu.

Terengganu, 31st Oct – 4th November 2011 53. Facilitator for the Preparation of MQA-01 Workshop-UTMSPACE Executive

Diploma Programme, Training Room 2 UTMSPACE. 25th May 2011 54. Facilitator for the Preparation of MQA-01 Document- Executive Diploma UTM

Razak School of Engineering and Advanced Technology. Meeting Room UTM Razak School, Jalan Semarak Kuala Lumpur. 10 Jan 2011



23

55. Facilitator & speaker for Academic Audit and Preparation of Self-Review Report

Workshop, Politeknik Sultan Haji Ahmad Shah (POLISAS). Kuantan, Pahang 16th-20th

January 2012 56. Facilitator & speaker for The Enhancement of MQA-02 Document Workshop,

Politeknik Tuanku Sultanah Bahiyah (PTSB) Kulim, Kedah. Hydro Hotel, Pulau Pinang 30th January- 3rd February 2012

57. Facilitator & speaker for The Preparation of MQA-02 Document Workshop,

Politeknik Sultan Sarajuddin (PTSS) Perlis, 21st - 24th February 2012 58. Facilitator for the Academic Quality Award Auditing Workshop, Dewan

Bankuet, UTM. 15th March 2012 59. Facilitator & speaker for The Continual Quality Improvement Through Self-

Review Exercise Workshop, Dept for Polytechnic Education, Southern Region, Bayview Hotel, Melaka. 28th- 30th March 2012

60. Facilitator & speaker for The Continual Quality Improvement Through Self-

Review Exercise Workshop, Dept for Polytechnic Education, North and East Region, Naza Talyya Hotel, Tanjung Tokong, Pulau Pinang. 4th- 6th April 2012

61. Facilitator & speaker for The Continual Quality Improvement Through Self-

Review Exercise Workshop, Dept for Polytechnic Education, Borneo Region, Kinabalu Daya (Best Western) Hotel, Kota Kinabalu, Sabah. 25th- 27th April 2012

62. Facilitator & speaker for Academic Audit Course and Preparation of Self Review

Report Workshop, Politeknik Sultan Sarajuddin (PTSS) Perlis, 21st - 25th May 2012 63. Internal Academic Audit Auditor (MQA) for Sultan Azlan Shah Polytechnic

(PSAS), Tanjung Malim, Perak. 11th-13th June 2012. 64. MQA Programme Accreditation Assessor for Diploma In Mechanical

Engineering Programe, Universiti Teknikal Malaysia Melaka. 19th-20th June 2012. 65. Internal Academic Audit Auditor for UTM Self Accrediting Status Exercise –

UTMKL. 21st-22nd June 2012. 66. Facilitator/Speaker for UTMSPACE Executive Programme Document

Preparation Workshop, UTMSPACE Building, Kuala Lumpur. 14th-15th August 2012. 67. Internal Academic Audit Auditor (MQA) for Politeknik Kuching Sarawak. 17th-

20th December 2012. 68. Facilitator/Speaker for the merging of ISO9001:2008-MQA system exercise for

Polytechnic Sultan Hj. Ahmad Shah, Kuantan, Pahang. 8th-11th January 2013 69. Facilitator/Speaker for UTMSPACE Executive Programme Document

Preparation Workshop, UTMSPACE Building, Kuala Lumpur. 30th-31st January 2013. 70. Speaker for Final Full Accreditation Exercise Academic Audit Preparation for

Jabatan Pengajian Politeknik, Jabatan Pengajian Politeknik, Kementerian Pengajian Tinggi. Copthorne Orchid Hotel, Tanjung Bungah, Pulau Pinang, 6th – 8th February 2013



24

71. Speaker for Final Full Accreditation Exercise Academic Audit Preparation for

Jabatan Pengajian Politeknik, Jabatan Pengajian Politeknik, Kementerian Pengajian Tinggi. Ancasa Hotel, Kuala Lumpur, 25th–27th February 2013.

72. UTM/MQA Assessor for Post Graduate Program, Advance Informatic School,

UTM International Campus, 23rd-25th September 2013. 73. Speaker for the MQA-02 Document Preparation Clinic, Politeknik Metro Johor

Bahru, 15th August 2013. 74. Speaker for the Outcome Based Education Course, Bhg. Kemahiran Teknikal

MARA, 24th-26th February, 2013.

6.0 PUBLICATIONS 6.1 JOURNAL PAPERS

1. M.H. Idris, A.J. Clegg, Processing and Evaluation of Investment Cast Magnesium-

Base Alloy, American Foundrymen Society Transactions, Vol. 104, 1996, pp. 237-244. 2. M.H. Idris, M.S. Yong, A.J. Clegg, Precision Casting of a Magnesium-Base Alloy,

Foundryman, Vol. 90, No. 4, 1997, pp. 140-144 3. W.S.W. Harun, S. Safian, M.H. Idris, K. Kadirgama, Characteristic Studies of

Collapsibility of ABS Patterns Produced from FDM for Investment Casting, Materials Research Innovations, Vol. 13, No. 3, 2009, 340-343

4. H. Jafari, M.H. Idris, A. Ourdjini, G. Payganeh, Effect of Thermomechanical

Treatment on Microstructure and Hardness of AZ63 Magnesium Alloy, Acta Metallurgica Sinica (English Letters), Vol. 22, No. 6, 2009, pp. 401-407

5. W.S.W. Harun, S. Safian, M.H. Idris, Evaluation of ABS Patterns Produced from FDM

for Investment Casting Process, WIT Transactions on Engineering Sciences, Vol. 64, 2009, pp. 319-328

6. H. Jafari, M.H Idris, A. Ourdjini, H. Rahimi, B. Ghobadian, Effect of Ethanol as

Gasoline Additive on Vehicle Fuel Delivery System Corrosion, Materials and Corrosion, Vol. 61, No. 5, 2010, pp. 432-440

7. H. Jafari, M.H. Idris, A. Ourdjini, M. Karimian, G. Payganeh, The Influence of Gating

System, Sand Grain Size and Mould Coating on Microstructure and Mechanical Properties of Thin Wall Ductile Iron, Journal of Iron and Steel Research, International, Vol. 17, No. 12, 2010, pp. 46-53

8. H. Sharifi, M. Divandri, A. Khavandi, M.H. Idris, Effect of Al Powder and Silica sol on

the Structure and mechanical Properties of Al2O3-ZrO2 Foam, Acta Metallurgica Sinica (English Letters), Vol. 23, No. 4, 2010, pp. 241-24.



25

9. S. Farahany, M. Erfani, A. Kamamoozian, A. Ourdjini, M.H. Idris, Artificial Neural Networks to Predict of Liquidus Temperature in Hypoeutectic Al-Si Cast Alloys, Journal of Applied Sciences, Vol. 10, No. 24, 2010, pp. 3243-3249

10. H. Jafari, M.H. Idris, A. Ourdjini, High Temperature Oxidation of Magnesium AZ91D

Alloy Granule in In-Situ Melting Technique, Corrosion Science, Vol. 53, No. 2, 2011, pp. 655-663.

11. H. Jafari, M.H. Idris, A. Ourdjini, H. Rahimi, B. Ghobadian, EIS Study of Corrosion

Behaviour of Metallic materials in Gasoline Containing Ethanol and Water as a Contaminat, Fuel, Vol. 90, No. 3, 2011, pp. 1181-1187.

12. H.R. Bakhsheshi Rad, A. Monshi, H. Monajatizadeh M.H. Idris, M.R. Abdul Kadir, H.

Jafari, Effect of Multi-Step Tempering on Retained Austenite and Mechanical Properties of Low Alloy Steel, Journal of Iron and Steel Research, International, Vol. 18, No. 12, 2011, pp. 49-56.

13. S.E. Harandi, M.H. Idris, H. Jafari, Effect of Forging Process on Microstructure,

Mechanical and Corrosion Properties of Biodegradable Mg-1Ca Alloy, Materials & Design, Vol. 32, No. 5, 2011, pp. 2596-2603.

14. S. Farahany, A. Ourdjini, M.H. Idris, Effect of Bismuth on the Microstructure of

Unmodified and Sr-modified Al-7%Si-0.4Mg, Transactions of Nonferrous Metals Society of China (English Edition), Vol. 21, No. 7, 2011, pp. 4376-4384.

15. H.R. Bakhsheshi Rad, A. Monshi, M.H. Idris, M.R. Abdul Kadir, H. Jafari, Premature

Failure Analysis of Forged Cold Back-up Roll in a Continuous Tandem Mill, Materials and Design, Vol. 32, Nos. 8-9, 2011, pp. 4376-4384.

16. S. Farahany, A. Ourdjini, M.H. Idris, Poisoning Effect of Bismuth on Modification

Behaviour of Strontium in LM25 Alloy, Bulletin of Materials Science, Vol. 34, No. 6, 2011, pp. 1223–123.

17. A. Akhavan Farid, S. Sharif, M.H Idris, Chip Morphology Study in High Speed

Drilling of Al-Si Alloy, International Journal of Advanced Manufacturing Technology, Vol. 57, Nos. 5-8, 2011, pp. 555–564.

18. S. Farahany, A. Ourdjini, M.H. Idris, Morphological characterstics of eutectic silicon in

strontium modified LM6 alloy, Malaysian Journal of Microscopy, Vol. 7, No. 1, 2011, pp. 185-190.

19. H. Jafari, M.H. Idris, A. Ourdjini, V. Ahmadshoar, Effect of Mould Runner and Coating

on Graphite Nodule Characteristics and Hardness of Thin Wall Ductile Iron, Advanced Materials Research, Vols. 264-265, 2011, pp. 502-507.

20. Hassan Jafari, Mohd Hasbullah Idris, Ali Ourdjini, Hamid Reza Bakhsheshi Rad, Seyed

Sadegh Khayat Ardestani, Vali Ahmadshoar. ‘Effect of Mould Runner and Coating on Graphite Nodule Characteristics and Hardness of Thin Wall Ductile Iron’. Advanced Materials Research Vols. 264-265 (2011) pp 266-271

21. M. Karimian, A. Ourdjini, M.H. Idris, T. Chuan, H. Jafari, Process Control of Lost

Foam Casting Using Slurry Viscosity and Dipping Time, Journal of Applied Sciences, Vol. 11, No. 21, 2011, pp. 3655-3658.



26

22. S. Farahany, M. Aghaie-Khafri, A. Ourdjini, M.H. Idris, Influence of Heat Treatment on Properties of Hot Isostatically Pressed Turbine Blade Superalloy IN738, Advanced Materials Research, Vols. 264-265, 2011, pp. 502-507

23. M. Karimian, A. Ourdjini, M.H. Idris, M.B. Asmael, Effect of Pouring Temperature

and Melt Treatment on Microstructure of Lost Foam Casting of Al-Si LM6 Alloy, Advanced Materials Research, Vols. 264-265, 2011, pp. 295-300.

24. H. Jafari, M.H. Idris, A. Ourdjini, S. Farahany, Oxidation and Melting

Characterisations of AZ91D Granules during In-situ Melting, Advanced Materials research, Vols. 311-313, 2011, pp. 631-634.

25. A. Akhavan Farid, S. Sharif, M.H. Idris, Surface Integrity Study of High Speed Drilling

of Al-Si Alloy Using HSS Drill, Proceedings of the Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture, Vol. 225, No. 7, 2011, pp. 1001-1007.

26. S. Izman, A. Shayganpour, M.H. Idris, Analysis of the Effect of Sand Size and

Vibration Time on Surface Roughness in Lost Foam Casting of LM6 Alloy by Design of Experiments, Advanced Materials Research, Vol. 337, 2011, pp. 422-425.

27. A. Shayganpour, M.H. Idris, S. Izman, S. Farahany, Variables Affecting Heat Transfer

and Surface Roughness in LFC of LM6 Aluminum Alloy, International Review of Mechanical Engineering, Vol. 5, No. 7, 2011, pp. 1168-1173.

28. H. R. Bakhsheshi-Rad, M. R. Abdul Kadir, M. H. Idris, S. Farahany, A. A. Suhasril.

‘Phase Evaluation of Pure Mg, Mg-1Ca and Mg-1Ca-3Zn Alloys by Thermal Analysis Used in Medical Applications. Research article published by the American Scientific Publishers.

29. S. Farahany, H.R. Bakhsheshi-Rad, M.H. Idris, M.R. Abdul Kadir, A.F. Lotfabadi, A.

Ourdjini, In-situ Thermal Analysis and Microscopical Characterisation of Mg-xCa and Mg-0.5Ca-xZn Alloy Systems, Thermochimica Acta, Vol. 527, 2012, pp. 180-189.

30. S. Koleini, M.H. Idris, H. Jafari. ‘Influence of Hot Rolling Parameters on

Microstructure and Biodegradability of Mg-1Ca in Simulated Body Fluid, Material and Design, Vol. 33, No. 1, 2012, pp. 20-25.

31. H.R.B Rad, M.H. Idris, M.R.A Kadir, S. Farahany, Microstructure Analysis and

Corrosion Behaviour of Biodegradable Mg-Ca Implant Alloys, Materials and Design, Vol. 33, No. 1, 2012, pp. 88-97.

32. S. Farahany, A. Ourdjini, M.H. Idris, The Usage of Computer-aided Cooling Curve

Thermal Analysis to Optimise Eutectic Refiner and Modifier in Al-Si Alloys, Journal of Thermal Analysis and Calorimetry, Vol. 109, 2012, 105-111.

33. S. Sharif, A. Akhavan Farid, M.H. Idris, Tool Life Prediction Model of Uncoated

Carbide Tool in High Speed Drilling of Al-Si Alloy Using Response Surface Methodology, International Journal of Surface Science and Engineering, Vol. 6, No.1/2, 2012, pp. 112-121.

34. H. Jafari, M.H. Idris, A. Ourdjini, S. Farahany, In-situ Melting Assessment of AZ91D

Granules by Thermal Analysis, Advanced Science Letters, Vol. 14, 2012, pp. 295-298.



27

35. A. Niakan, M.H. Idris, M. Karimian, A. Ourdjini, Effect of Pressure on Structure and Properties of Lost Foam Casting of Al-11Si Cast Alloy, Applied Mechanics and Materials, Vol. 110-116, 2012, pp. 639-643.

36. H.R.B Rad, M.H. Idris, M.R.A Kadir, S. Farahany, A. Fereidouni, M.Y. Yahya,

Characterisation and Corrosion Behaviour of Biodegradable Mg-Ca and Mg-Ca-Zn Implant Alloys, Applied Mechanics and Materials, Vols. 121-126, 2012, pp. 568-572.

37. M.H. Idris, H. Jafari, S.E. Harandi, M. Mirshahi, S. Koleyni, Characterisitcs of As-cast

and Forged Biodegradable Mg-Ca Binary Alloy Immersed in Kokubo Simulated Body Fluid, Advanced Materials Research, Vol. 445, 2012, pp. 301-306.

38. S. Izman, A. Shayganpour, M.H. Idris, H. Jafari, DOE Analysis of the Influence of Sand

Size and Pouring Temperature on Porosity in LFC, Advanced Materials Research, Vols. 121-126, 2012, pp. 2661-2665.

39. M. Assadian, M.H. Idris, S. Mehraban, S. Jafari, M.R Abdul Kadir, Effect of HF

Concentration on Corrosion Resistance of Biomedical Implants, Advanced Materials Research, Vols. 463-464, 2012, 837-840.

40. S. Izman, A. Shayganpour, M.H. Idris, Effect of Casting Parameters on Porosity in

LFC, Applied Mechanics and Materials, Vols. 148-149, 2012, pp. 1198-1201. 41. A.A. Niakan, M.H. Idris, A. Ourdjini, Majid Karimian, Properties of Pressurized Lost

Foam Casting of Al-11Si Alloy, Advanced Materials Research, Vols. 383-390, 2012, pp. 1730-1734.

42. M. Karimian, A. Ourdjini, M.H. Idris, H. Jafari, Effect of pattern coating thickness on

characteristics of lost foam Al-Si-Cu alloy casting, Transactions of Nonferrous Metals Society of China (English Edition), Vols. 22, 2012, 2092−2097.

43. H. Jafari, M.H. Idris, A. Ourdjini, S. Farahany, M.R. Abdul Kadir, Characterization of

AZ91D Granules Covered with a Flux during In-situ Melting, Particle & Particle Systems Characterization, Vols. 29, 2012, 263–272.

44. H.R. Bakhsheshi-Rad, M.R. Abdul-Kadir, M.H. Idris, S. Farahany, Relationship

between the corrosion behavior and the thermal characteristics and microstructure of Mg–0.5Ca–xZn alloys, Corrosion Science, Vols. 64, 2012, 184–197.

45. Saeed Farahany, Hamid Reza Bakhsheshi-Rad, Mohd Hasbullah Idris, Mohammed

Rafiq Abdul Kadir, Amir Fereidouni Lotfabadi, Ali Ourdjini, In-situ thermal analysis and macroscopical characterization of Mg–xCa and Mg–0.5Ca–xZn alloy systems, Thermochimica Acta. Vols. 527, 2012, 180– 189.

46. Hamid Reza Bakhsheshi-Rad, Mohd Hasbullah Idris, Mohammed Rafiq Abdul Kadir,

Saeed Farahany, Amir Fereidouni, Mohd Yazid Yahya, Characterization and corrosion behavior of biodegradable Mg-Ca and Mg-Ca-Zn implant alloys, Applied Mechanics and Materials, Vols. 121-126, 2012, 568-572.

47. H. Jafari, R. Sadeghi, M.H. Idris, A. Ourdjini, Effect of flux composition on mould-

magnesium reaction during in-situ melting, AIP Conference Proceeding, 1440, 2012, 480-485.



28

48. Amirreza Shayeganpour, Mohd Hasbullah Idris, Izman Sudin and Saeed Farahany,

Effects of pouring temperature and slurry viscosity on heat transfer and surface roughness in lost foam casting, AIP Conference Proceedings, 1440(1), 2012, 1264-1270.

49. Tuti Yasmin Alias, Mohd Hasbullah Idris, Zuraida Ahmad and Ali Ourdjini,

Rheological Behavior and Stability of Cassava Starch For Ceramic Mould Binder Application, Advanced Materials Research Vol. 576, 2012, pp 162-165.

50. H.R. Bakhsheshi-Rad, M.R. Abdul-Kadir, M.H. Idris, S. Farahany. ‘Relationship

between the corrosion behavior and the thermal characteristics and microstructure of Mg–0.5Ca–xZn alloys’. Corrosion Science 64 (2012) 184–197.

51. H. Jafari, M.H. Idris, A. Ourdjini, M.R.A Kadir, Influence of Flux on Melting

Characteristics and Surface Quality of In-Situ Melting AZ91D’. Materials and Manufacturing Processes 28 (2), 148-153, 2013 (IF: 1.297)

52. S. Farahany, A. Ourdjini, M. H. Idris, A. V. Takaloo and L.T. Thai, Combined effect of

bismuth content and cooling rate on microstructure and mechanical properties of an Al-8.5Si-0.4Mg-0.3Fe Alloy, Canadian Metallurgical Quarterly 2013 Vol. 52 No. 2

53. Amirreza Jahangiri, Mohd Hasbullah Idris and Saeed Farahany, Investigation on

tungsten inert gas welding of in situ Al-15 and 20 Mg2Si composites with an Al-Si filler, Journal of composite Materials, 2013, In press.

54. S.E. Harandi, M. Mirshahi, S. Koleini, M.H. Idris, H. Jafari, The Effects of Calcium

Content on the Microstructure, Hardness and In-vitro Corrosion Behavior of Biodegradable Mg-Ca Alloys, Materials Research, vol. 16, pg 11-18, Feb. 2013. (IF: 0.516)

55. Amir Fereidouni Lotfabadi, Mohd Hasbullah Idris, Ali Ourdjini, Mohammed Rafiq

Abdul Kadir, Saeed Farahany, Hamid Reza Bakhsheshi–Rad, The effect of Zn addition on microstructure, thermal analysis and corrosion behaviour of Mg-xZn binary alloy for biomedical application, Bulletin of Materials Science, 2013, In press.

56. Hassan Jafari, Mohd Hasbullah Idris, Ali Ourdjini, Mohammed Rafiq Abdul Kadir, An

investigation on interfacial reaction between in-situ melted AZ91D magnesium alloy and ceramic shell mold during investment casting process, Materials Chemistry and Physics, vol. 138, pg 672-681, March 2013 (IF: 2.072)

57. H Jafari, MH Idris, A Ourdjini A Review of Ceramic Shell Investment Casting of Magnesium Alloys and Mold-Metal Reaction Suppression’. Materials and Manufacturing Processes 28 (8), 843-856, 2013 (IF:1.297).

58. H Jafari, MH Idris, A Ourdjini, S Farahany, ‘In-situ Melting and Solidification

Assessment of AZ91D Granules by Computer-Aided Thermal Analysis during Investment Casting Process’. Materials & Design, 50, 181–190, 2013 (IF: 2.913)

59. Hassan Jafari, Mohd Hasbullah Idris, Amirreza Shayganpour. ‘Evaluation of

significant manufacturing parameters in lost foam casting of thin-wall Al−Si−Cu alloy using full factorial design of experiment’. Trans. Nonferrous Met. Soc. China 23,

2843−2851, 2013 (IF:0.917).



29

60. H Jafari, MH Idris, A Ourdjini. ‘ An Alternative Approach in Ceramic Shell Investment Casting of AZ91D Magnesium Alloy: In-Situ Melting Technique’. Journal of Materials Processing Technology (In press) (IF:1.953).

61. Hassan Jafari, Mohd Hasbullah Idris, Ali Ourdjini. ’Effect of Thickness and

Permeability of Ceramic Shell Mould on In-situ Melted AZ91D Investment Casting’. Applied Mechanics and Materials Vols. 465-466 (2014) pp 1087-1092 (2014) (Scopus indexed)

62. Mohd Hasbullah Idris, Mohd Shamsul Husin.’ Effect of Friction Stir Welding Pin

Shape on Mechanical Properties of AA6061 Alloy Weldment’. Applied Mechanics and Materials Vols. 465-466 (2014) pp 1309-1313 (2014). (Scopus indexed)

63. M. Mohd Rashidi, Mohd Hasbullah Idris.’ Effect of inoculation on microstructure,

mechanical and corrosion properties of high manganese ductile Ni-resist alloy’. Materials and Design 51 (2013) 861–869

64. Maarof Mohd. Rashidi, Mohd. Hasbullah Idris .’Microstructure and mechanical

properties of modified ductile Ni-resist with higher manganese content’. Materials Science & Engineering A 574 (2013) 226–234.

65. H.R. Bakhsheshi-Rad, M.H. Idris, M.R. Abdul-Kadir. ’Synthesis and in vitro

degradation evaluation of the nano-HA/MgF2 and DCPD/MgF2 composite coating on biodegradable Mg–Ca–Zn alloy’. Surface & Coatings Technology 222 (2013) 79–89.

66. H.R. Bakhsheshi-Rad, M.H. Idris , M.R. Abdul-Kadir, A. Ourdjini, M. Medraj, M.

Daroonparvar, E. Hamzah. ‘Mechanical and bio-corrosion properties of quaternary Mg–Ca–Mn–Zn alloys compared with binary Mg–Ca alloys’. Materials and Design 53 (2014) 283–292.

67. Hamid Reza Bakhsheshi-Rad, Mohd Hasbullah Idris, Mohammed Rafiq Abdul Kadir,

Mohammadreza Daroonparvar. ‘Effect of fluoride treatment on corrosion behavior of

Mg−Ca binary alloy for implant application’. Trans. Nonferrous Met. Soc. China 23(2013) 699−710

68. Bakhsheshi-Rad Hamid Reza, Kadir Mohammed Rafiq Abdul, Idris Mohd Hasbullah,

Farahany Saeed, Lotfabadi Amir Fereidouni. ‘Effect of Zn and Ca additions on the solidification behaviour and Microstructure Analysis of Mg and Mg-6Zn Alloys’. Advance Science Letters, Vol. 19. No. 12, December 2013, pp 3508-3514 (4)

69. Bakhsheshi-Rad Hamid Reza, Idris Mohd Hasbullah, Kadir Mohammed Rafiq Abdul,

Farahany Saeed, Lotfabadi Amir Fereidouni, Suhasril Andril Arafat ‘Effect of Secondary Phase on the corrosion behaviour of Mg-Ca and Mg-Zn binary Alloys. Advance Science Letters, Vol. 19. No. 9, September 2013, pp 2553-2557 (5)

70. Shahram Ghaedi Faramoushjan, Farhad Chinaei, Hamid Reza Bakhsheshi-Rad, Mohd

Hasbullah Idris. ‘Effect of fluoride conversion coating on Corrosion of behavior of Mg-Ca-Zn alloy’. Advanced Materials Research Vols. 712-715 (2013) pp 3-6.

71. Amir Fereidouni Lotfabadi, Mohd Hasbullah Idris, Ali Ourdjini, Mohammed Rafiq Abdul Kadir, Saeed Farahany, Hamid Reza Bakhsheshi-Rad. ‘Thermal characteristics and corrosion behaviour of Mg–xZn alloys for biomedical applications’. Bull. Mater. Sci., Vol. xx, No. x, Month 2013, pp. 1–11.



30

72. H. R. Bakhsheshi-Rad, B. Haerian, A. Najafizadeh, E. Hamzah, M. H. Idris,

M. R. A. Kadir and M. Daroonparvar. ‘Cold deformation and heat treatment influence on the microstructures and corrosion behavior of AISI 304 stainless steel’. Canadian Metallurgical Quarterly 2013 Vol. 000 No. 000, pp 1-9.

73. S. Farahany, A. Ourdjini, M. H. Idris, S. G. Shabestari, Computer-aided cooling curve thermal analysis of near eutectic Al–Si–Cu–Fe alloy-Effect of silicon modifier/refiner and solidification conditions on the nucleation and growth of dendrites Journal of Thermal Analysis and Calorimetry, DOI 10.1007/s10973-013-3005-7

74. S. Farahanya, A. Ourdjinia, M.H. Idris, S.G. Shabestari. ‘ Evaluation of the effect of Bi, Sb, Sr and cooling condition on eutectic phases in an Al–Si–Cu alloy (ADC12) by in situ thermal analysis’. Thermochimica Acta 559 (2013) 59– 68.

75. Saeed Farahany, Ali Ourdjini, Tuty Asma Abu Bakar, Mohd Hasbullah Idris. ‘ On the refinement mechanism of silicon in Al-Si-Cu-Zn alloy with addition of bismuth’. (under review)

76. Saeed Farahany; Ali Ourdjini, Tuty Asma Abu Bakar, Mohd Hasbullah Idris. ‘ A new

approach to assess the effects of Sr and Bi interaction in ADC12 Al-Si die casting alloy’. Thermochimica Acta (under review)

77. Saeed Farahany, Ali ourdjini, Tuty Asma Abu Bakar , Mohd Hasbullah, Role of bismuth

on solidification characteristics, microstructure development and mechanical properties

of Al-12Si-2Cu-0.6Fe die casting alloys, Metals and Materials International. (Under

review) 5.2 CONFERENCE PAPERS

1. M.H. Idris, C.S. Lim, L. Siaminwe and A.J. Clegg, Investment Casting Research,

presented by A.J. Clegg to the European Investment Caster’s Federation Lost Wax ’96, Maastricht, Germany, 19-21 March 1996, pp. 6

2. M.H. Idris, A. Ourdjini, E. Hamzah, A.J. Clegg, Processing and Evaluation of an

Investment Cast Magnesium-Base Alloys, Proceeding of the 8th Electron Microscopy Conference, Awana Genting Highland and Golf Resort, 2-4th December, 1999.

3. M.H. Idris, A. Ourdjini, E. Hamzah, A.J. Clegg, Investment Casting for Magnesium

Alloys, Proceeding of the Second International Conference on Advanced Manufacturing Technology (ICAMT), Johor Bahru, Malaysia, August 16-17, 2000, pp.591-594

4. M.H. Idris, A. Ourdjini, E. Hamzah, A.J. Clegg, Suppression of Mould-metal Reaction

During Investment Casting, Proceeding of the Magnesium Alloys and Their Applications Conference, Munich, Germany, 26-28 Sept. 2000, pp.628-632

5. M.H. Idris, A. Ourdjini, E. Hamzah, Cracking of Ceramic Shell During Investment

Casting of Magnesium Alloy, Proceeding of the 9th Electron Microscopy Conference, 12-14 Nov., 2000, Kota Bharu, Kelantan, pp. 265-267



31

6. M.H. Idris, A. Ourdjini, E. Hamzah, A.J.Clegg, Grain Refinement of an Investment Cast Magnesium Alloy Using In-mould and Vibration Techniques, Proceeding of the 12th Scientific Conference of the Electron Microscopy Society of Malaysia, Langkawi, Malaysia, 15-17 Dec., Vol. 12, 2003, pp.29-38

7. M.H. Idris, L. Chung Sin, M. Isa, Application of Reverse Engineering Approach on

Automotive Turbo Charger Impeller, Paper presented at the ICMM 2006, Universiti Malaya.

8. M.H. Idris, S. Eirin, Properties Evaluation of Ceramic Shell Investment Casting Mould

Mixed with Rice Husk, Paper presented at the National Metallurgical Conference 2007, Johor Bharu, Johor, Malaysia, 26th – 27th Nov. 2007.

9. M.H. Idris, C.S Lee, S. Eirin, Properties Evaluation of Ceramic Shell Investment

Casting Mould Mixed with Rice Husk Addition, Paper presented at the 3rd Brunei International Conference on Enginering and Technology 2008, Bandar Sri Begawan, Brunei Darussalam, 3rd – 4th Nov. 2008.

10. M.H. Idris, S. Sharif, W. Sharuzi, W. Harun, Evaluation of ABS Hollow and Solid

Pattern Constructions Produced from FDM for Investment Casting Process, The 9th Asia Pacific Industrial Engineering and Management Systems Conference, Nusa Dua, Bali, Indonesia, 3rd – 5th Dec. 2008.

11. H. Jafari, M.H. Idris, A. Ourdjini, M.T. Ahmadi, Thermomechanical Treatments on

AZ63 Alloy, The 1st AUN/SEED-Net Regional Conference on Materials 2009 (RCM2009), 16-17 Feb. 2009, Penang, Malaysia.

12. H. Jafari, M.H. Idris, A. Ourdjini, V. Ahmadshoar, Effect of Mould Runner and Coating

on Graphite Nodule Characteristics and Hardness of Thin Wall Ductile Iron, Advances in Materials & Processing Technology (AMPT2009), Kuala Lumpur, Malaysia, Nov. 26-29, 2009.

13. S. Farahany, A. Ourdjini, M.H. Idris, M. Aghaie, Effect of Pre and Post Heat Treatment

on Mechanical Properties of Hot Isostatically Pressed Turbine Blade Superalloy Inconel 738, International Conference on Advanced Materials and Processing Technology, Kuala Lumpur, 26-29 Oct., 2009.

14. R. Ahmad, M.Y. Hashim, M.H. Idris, Design Sensitivity Analysis of Squeeze Casting

Process, The 2nd International Conference on Computer and Automation Engineering, Vol. 5, art. no. 5451417, 2010, pp. 342-345 (Scopus Indexed).

15. M. Karimian, A. Ourdjini, M.H. Idris, K. Muthu, Effect of Flask Vibration Time on

Casting Integrity, Surface Penetration and Coating Inclusion in Lost Foam Casting of Al-Si Alloy, AIP Conference Proceedings, Vol. 1315, 2010, pp. 633-638 (Scopus Indexed).

16. H. Sharifi, M. Divandri, A. Khavandi and M.H. Idris, Effect of Additive Materials on

the Foaming Behaviour, Cell Structure and Mechanical Properties of Al2O3-ZrO2, 10th Iranian Conference on Manufacturing Engineering, Babol Noshirvani University of Technology, Iran 1-3 Mar., 2010.

17. H. Jafari, M.H. Idris, A. Ourdjini, H. Rahimi, B. Ghobadian, Corrosion Study of

Metallic Materials of an Automotive Fuel Injection System in Ethanol Blended



32

Gasoline, International Conference on Process Engineering and Advanced Materials, 15-17 Jun., 2010, Kuala Lumpur, Malaysia.

18. S. Farahany, A. Ourdjini, M.H Idris, Prediction of Liquidus Temperature in Al-Si Cast

Alloy Using Artificial Neural Network, International Conference on Process Engineering and Advanced Materials, 15-17 Jun., 2010, Kuala Lumpur.

19. H.R. Bakhsheshi Rad, M.H. Idris, A. Monshi, H. Monajatizadeh, The Influence of Heat

Treatment in Mechanical Properties and Microstructure of 3Cr-Mo Steel Used in Tandem Back-up Rolls, Third International Graduate Conference on Engineering, Science and Humanity (IGCESH 2010), Johor Bahru, Malaysia, Nov. 2-4, 2010.

20. S. Farahany, A. Ourdjini, M.H.Idris, Characterization of the Morphology of Eutectic

Silicon in Strontium-Modified Al-11%Si Using SEM, 19th Scientific Conference of the Electron Microscopy Society of Malaysia, Langkawi, Malaysia, Dec. 8-10. 2010.

21. M.H. Idris, H. Jafari, S.E. Harandi, M. Mirshahi, S. Koleyni, Characterisitcs of As-cast

and Forged Biodegradable Mg-Ca Binary Alloy Immersed in Kokubo Simulated Body Fluid, Advances in Materials & Processing Technology (AMPT2011), Turkey, Nov. 26-29, 2011.

22. M.H Idris, HR Bakhsheshi-Rad, AF Lotfabadi, ‘Relationship between secondary phase

and corrosion properties of biodegradable Mg-based alloys’, 5th Biometals 2013, International Symposium on Biodegradable Metals for Biomedical Application, Umang Island, Indonesia, 26th Aug-31st Aug. 2013.

6.3 ARTICLES AND THESES

1. Mohd Hasbullah Idris, ‘Pemesinan Tak Lazim’, Science and Technology Malaysia, vol.

4, No. 1, 1993. 2. ‘Processing and Evaluation of Investment Cast Magnesium-Base Alloy’. Mohd

Hasbullah Idris, MPhil Theses, September 1995, Loughborough University of Technology.

3. Article for The Science and Technology Encyclopaedia Project, Universiti Teknologi

Malaysia/Dewan Bahasa dan Pustaka, titled ‘The Investment Casting Process’. 4. Article for The Science and Technology Encyclopaedia Project, Universiti Teknologi

Malaysia/Dewan Bahasa dan Pustaka, titled ‘The Carbon Dioxide Process’. 5. Article for The Science and Technology Encyclopaedia Project, Universiti Teknologi

Malaysia/Dewan Bahasa dan Pustaka, titled ‘The Shaw Casting Process’. 6. Article for The Science and Technology Encyclopaedia Project, Universiti Teknologi

Malaysia/Dewan Bahasa dan Pustaka, titled ‘The Shell Casting Process’. 7. Article for The Science and Technology Encyclopaedia Project, Universiti Teknologi

Malaysia/Dewan Bahasa dan Pustaka, titled ‘The Plaster Moulding Process’. 8. Article for The Science and Technology Encyclopaedia Project, Universiti Teknologi

Malaysia/Dewan Bahasa dan Pustaka, titled ‘The Evaporative Pattern Casting Process’.



33

9. Article for The Science and Technology Encyclopaedia Project, Universiti Teknologi Malaysia/Dewan Bahasa dan Pustaka, titled ‘The Centrifugal Casting Process’.

10. Article for The Science and Technology Encyclopaedia Project, Universiti Teknologi

Malaysia/Dewan Bahasa dan Pustaka, titled ‘The Water Jet Machining’. 11. Article for The Science and Technology Encyclopaedia Project, Universiti Teknologi

Malaysia/Dewan Bahasa dan Pustaka, titled ‘The Laser Beam Machining’. 12. Article for The Science and Technology Encyclopaedia Project, Universiti Teknologi

Malaysia/Dewan Bahasa dan Pustaka, titled ‘The Electron Beam Machining’. 13. Article for The Science and Technology Encyclopaedia Project, Universiti Teknologi

Malaysia/Dewan Bahasa dan Pustaka, titled ‘The Ultrasonic Machining’. 14. Article for The Science and Technology Encyclopaedia Project, Universiti Teknologi

Malaysia/Dewan Bahasa dan Pustaka, titled ‘Welding’.

7.0 COURSES ATTENDED RELATED TO THE FIELD OF INTEREST:

1. Continuous/Direct Chill Casting Operations and Handling of Molten Aluminium, Bangpoo Plant, Aluminium Company of Thailand/Nikkei Thai (Associated company of Alcan International), Bangkok, Thailand, 1989 (2 weeks).

2. Investment Casting Process, Maymar Investment Casting Plant, Hitchin, United Kingdom ( 2 weeks), 1991.

3. Attended Casting Module for one term/semester at Loughborough University under

the course tutor Dr. A.J. Clegg, 1994.

4. Mechanical Engineering Course - Casting, Nagoya Municipal Industrial Research Institute, Nagoya, Japan, 1996.

5. One day course on Induction furnace operations, Cast Metal Laboratory, UTM, 1998.

6. Practical Foundry Engineering training for a period of one month at Cast Metal

Laboratory, Faculty of Mechanial Engineering, UTM. Trained by Mr. R.I. Temple ,Foundry technical personnel from Loughborough University under the auspices of British Council CICHE/HED Foundry Engineering 639 project, March 1996.

7. ISO 9000:1994 Lead Auditor Course, De Palma Hotel, Kuala Lumpur (conducted by the Dept. of Management Development, University of Portmouth and organised by Midworld Sdn Bhd ), 1996.

8. ISO 9001:2000 Lead Auditor Course, Grand Blue Wave Hotel, Shah Alam (conducted

SIRIM QAS and The Systems 3 Group Pty Ltd, Australia), 17-22 June 2002. Awarded with Certificate of completion/exam on ISO 9000 Auditor/Lead Auditor.

9. Balance Scorecard Workshop, Renaissance Hotel, Melaka. 16-18 November 2007.

10. Special workshop on Learning Outcome for MQA Panel of Evaluators. Crown Hall

Level 1, Crystal Crown Hotel, Petaling Jaya, Selangor. 30th March 2010.



34

11. Outcome-Based Education – Deriving from the first principle, The Institution of

Engineers, Malaysia. UNITEN, 21-22. May 2008.

12. MQA Programme Accreditation Course, The Legend, Kuala Lumpur, 27-28 July. 2009.

13. MQA ASEAN Auditors Training Course, Puteri Pacific, Kuala Lumpur, 4-6 August 2009.

14. MyQuest Auditor Training Course, Hilton Hotel, Petaling Jaya, Selangor, 29th April

2011.

15. 9th Asia Pacific Musculoskeletal Tumor Society Meeting 2012, Hilton Hotel, 7th-9th September 2012.

8.0 APPOINTMENTS:

1. Proceeding technical paper editor for the Electron Microscopy Society of Malaysia (EMSM) Conference, 17th and 18th Dec. 2002.

2. Proceeding technical paper editor for the 2nd International Conference on Advanced

Manufacturing Technology, 16th and 17th Aug. 2000. 3. Internal examiner for Master Degree of Mechanical Engineering oral examination

(viva), ‘Microdrilling of Electronic Materials”, 30th Dec. 2002. 4. Chairman for the Master Degree of Mechanical Engineering oral examination (viva),

10th March. 2003. 5. Internal Examiner for PhD Degree of Mechanical Engineering oral examination (viva),

‘An Experimental Investigation on Partial-Ductile Mode Grinding of Silicon’, 3rd March. 2003

6. Internal Examiner for PhD Degree of Mechanical Engineering oral examination (viva),

‘Performance Evaluation of Coated Carbide and Coated Cermet Tools When Turning Hardened Tool Steel’, 17th November. 2003

7. Internal Examiner for PhD Degree of Mechanical Engineering oral examination (viva),

‘ Investigation Into Some Aspects of Partial Ductile Mode of Optical Glass’, 17th May. 2004

8. Member of the Technical Evaluation Committee for the Civil Engineering Material and

structure and T & T research area. 9. Foundry Engineering Laboratory Coordinator, Faculty of Mechanical Engineering,

UTM Skudai. 1st Jan 2002 to 31st Dec. 2003. 10. Member of the Technical Committee for the International Conference on Postgraduate

studies, 3-4 Sept. 1997. 11. Member of the Faculty of Mechanical Engineering Research Coordinating Committee



35

12. Chairman of the Forum – ‘ Customers’ Perception Toward PSZ’, 15th August 2000, Seminar Room 3, Perpustakaan Sultanah Zanariah, UTM, Skudai.

13. Co-coordinator for CICHE/HED British Council, Foundry Engineering 639 project,

1996-1998 14. ISO 9000 Internal Auditor for UTM for a period of 2 years commencing from 21st

October 1998-20th Sept. 2000 15. ISO 9000:2000 Chairman of the Steering Committee for the Development of Teaching

and Learning Quality Management System for Mechanical Engineering Faculty, UTM, Skudai.

16. Member of the Competency Assessment Exam Panel – Social Service Scheme. 4th June

2003 – 3rd June 2005. 17. Technical advisor to Subahir (M) Sdn Bhd ( categorised as SME) 18. Technical advisor to Kharsani Enterprise ( categorised as SME) 19. Member of the Working Committee for the implementation of UTM ISO 9001:2000

Corporate Certification exercise and the establishment of UTM Quality Unit 20. Manuscript reviewer for the International Conference on Advanced Manufacturing

Technology (ICAMT) 2004, entitled “The Optimisation of a Concasting Technology by Two Numerical Models”.

21. Manuscript reviewer for the International Conference on Advanced Manufacturing

Technology (ICAMT) 2004, entitled “Study of Solidification Time in Squeeze Castings Made of Aluminium and Zinc”.


Technology (ICAMT) 2004, entitled “Thin Strip Twin Roll casting of Aluminium Alloys”.


Technology (ICAMT) 2004, entitled “Stabilising the melt stream in the Multi Strand Casting of Metallic Glass Wire”.

24. Evaluator for the M. Eng (Mechanical-Advanced Manufacturing technology) Project

presentation, ‘ Performance Evaluation of Carbide Tools When turning hardened Steel’, 18th March. 2004

25. Member of the Organising Committee for the Conference on Electron Microscopy, 17th

–18th Dec. 2002. 26. Manuscript reviewer for the Journal of Technology, entitled ‘Enhancing the use of

Quality Engineering Tools and Techniques in Manufacturing Industries: A Six Sigma Way. Ref. No. JTA/2004/07

27. Member of the 2003 Vice Chancellor Quality Award Audit Panel 28. Member of the 2004 Vice-Chancellor Quality Award Audit Panel.



36

29. Member of the 2005 Vice Chancellor Quality Award Audit Panel 30. Member of the 2006 Vice Chancellor Quality Award Audit Panel 31. Member of the 2007 Vice Chancellor Quality Award Audit Panel 32. Member of the 2009 Vice Chancellor Quality Award Audit Panel 33. Head of Manufacturing Panel, FKM, UTM. 27th August 2006 – 26th August 2008. 34. Foundry Laboratory Coordinator, FKM, UTM. 1st June 2003 – 31st May. 2006. 35. Foundry Laboratory Coordinator, FKM, UTM. 1st June 2006 – 31st May. 2008. 36. Member of the Panel of Evaluator for FRGS proposal, C Category, Advanced Material

and Manufacturing Cluster. 7th December 2006. 37. Deputy Chairman 1, National Metallurgical Conference 2007 (NMC), 26-27th

November. 2008 38. Manuscript reviewer for the Journal of Technology, entitled ‘The Mechanical

Properties of Aluminium Pole from (T6) Aluminium Alloy. 39. Member of the Panel of Evaluator for FRGS proposal, C Category, Advanced Material

and Manufacturing Cluster. 7th December 2006. 40. Technical Advisor to Lambang Wibawa Sdn. Bhd – Medical implant Manufacturing

Company 41. Business Advisor To Ritma Harta Sdn. Bhd – Higher education book contractor. 42. Member of the Faculty of Mechanical Engineering tender board May 2008 – May 2010 43. Chairman of the Faculty of Mechanical Engineering Resource Centre Development

Committee 44. Chairman of the Faculty of Mechanical Engineering Quality Unit 45. Head of Materials Engineering Department, 2nd May 2007-14th July 2009. 46. Deputy Director (Academic), University Quality Unit, 15th July 2009 – 31st Sept. 2012.

47. MSc (Mechanical Engineering) thesis Internal examiner – Tan Lean Huat, 26th November 2010, Viva Room, Faculty of Mechanical Engineering.

48. MSc (Materials Engineering) thesis Internal examiner – Fadi Faris Hussain, 19th

November 2010, Viva Room, Faculty of Mechanical Engineering. 49. Auditor for the Quality Assurance System (MyQUEST) for Private Colleges, Ministry

of Higher Education Malaysia.



37

50. External examiner for Diploma in Casting Technology, Institut Kemahiran Belia Negara Temerloh, Pahang. 1st April 2011 – 31st April 2013

51. Foundry Laboratory Coordinator, FKM, UTM. 31st May. 2008-present 52. Member of the Senate Standing Committee for New Programmes/Faculty/Centre. 15th

July – present 53. Member of the Senate Standing Committee for External Programmes 15th July –

present 54. Member of the Senate Standing Committee for Student Intake 15th July – present 55. Chairman for Technical Session in the 14thth International Conference on Advances in

Materials and Processing Technologies, AMPT 2011, 13-16 July 2011, Istanbul , Turkey

56. Panel of Assessor for the Vice Chancellor Innovation Award 2011, Universiti Teknologi

Malaysia. 57. Speaker at the Science & Technology and Industry Linkage Round Table Forum

2/2012: Foundry Industry, Academy of Sciences Malaysia, Kuala Lumpur. 3rd September 2012.

58. Book reviewer for Universiti Tun Hussein Onn Malaysia Publisher titled ‘Rapid

Prototyping Technology Principle and Applications on SLS’, July 2012. 59. Advisor to the Faculty of Mechanical Engineering Quality Assurance Committee. 1st

November 2012 – 31st October 2014. 60. Member of the Faculty of Mechanical Engineering Academic Committee. 18th January

2013 – present 61. Member of the Academic Advisory Board for Diploma in Mechanical Technology

(Design Drawing), School of Engineering and Creativity Science, Kolej Yayasan Pelajaran Johor (KYPJ). 16th January 2013 -15th January 2015.

62. Chairman of viva voce MPhil (Mechanical Engineering) – Mohd Zulkhaairi Tukimin.

15th February 2013.

63. Member of the Faculty of Mechanical Engineering Academic Administrator Selection Committee – 6th Sept. 2013-present.

64. Member of the Faculty of Mechanical Engineering Tender Committee – 1st Jan. 2014 –

31st Dec. 2015.

9.0 PROFESSIONAL MEMBERSHIP:

1. American Foundry Society (International Member) ID: 00252618 2. Microscopy Society of Malaysia (Life member) 3. Malaysian Science, Engineering and Technology. ID: 187



38

UPDATED: 12nd March 2014