Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
Forno [email protected]
Cucina SeriesModular Pizza Oven Stands
The Forno Bravo Cucina Series oven stand is a line of modular stands for any residential oven we sell. This versatile stand is ideally suited for the Modular Oven Kit series of ovens like the Giardino, Casa2G, Premio 2G, Pompeii and Artigiano but also work very well with the Toscana fully assembled ovens.The Cucina oven stand makes it easy to give any oven a custom, built-in look—without the effort and weight of building a concrete block (CMU) stand. This can save you several days in construction since the steel frame doesn’t have to be stacked like masonry block and cured.Another advantage to the Cucina oven stand is that is significantly reduces the weight of the overall construction of your built in oven. The Steel frame and hardi backer weighs about 400 Lbs without any decorative facade or hearth. Plus the concrete hearth required is less than 2″ thick with 3/8″ rebar as opposed to the standard 3 1/2″ hearth common on masonry stand hearths. The Cucina oven stand is comprised of a knocked-down metal frame and pre-cut, pre-drilled backer board panels for the exterior. The stand can be assembled in minutes using a standard wrench and screw driver.After assembling the Cucina ovenstand, the installer simply pours standard concrete into the pre-formed hearth tray—and then places the Forno Bravo oven on top.
The Cucina Series oven stands can be finished in virtually any material, including stucco, stone or brick.The Cucina Series oven stand comes in seven sizes, fitting ovens up to a 44″ cooking surface (Casa2G 110). The size of the stand corresponds to the oven.
• Giardino 60 takes a Cucina 60, etc• Casa 80 takes a Cucina 80 setc.• Artigiano product is always plus one in size,
Artigiano 80 requires Cucina 90• Premio product is always plus one in size, Premio
100 requires Cucina 110• Pompeii, refer to your oven plans before selecting
as brick used, hearth size and other factors controlled by the mason (or you) drive the stand size.
If you wish to extend the landing, or build a small prep area outside the oven, you can buy a larger Cucina oven stand and pick up extra space.
A fast, easy way to get a “built-in” look
Specification Sheet
Forno [email protected]
Cucina 60Modular Pizza Oven Stands
39"Stand Width
25"Opening
Width
24"OpeningHeight
A
A
Add 2-1/4" per side for backer board and min facade
see chart below
2
34
5
78
47"Stand Length
39"StandHeight
SECTION A-A
13
4
6
5
DETAIL BSCALE 1 : 12
T-Bar is welded infor extra strength
19
Pre cut 1/4" cement backerboard on sides
Pre cut 1/2" cement backerboard for steel reinforced hearthsupport. Hearth to be 1-5/8" with3/8" rebar.
Opening designed forwood storage belowhearth
CUCINA 60LAYOUT DRAWING
MADE IN THE U.S.A.
ISO View Front Elevation
Metal stand with cementbacker board and concrete hearth
Specifications:
Stand includes metal frame, assemblyhardware, pre cut / pre-drilled exteriorcement backer board panels.
Side Elevation
Works with Giardino60/Primavera60
Pallet size and weight are41W x 49L x 15H @ 390 lbs
OPTIONAL FACADES DEPTH WIDTHBRICK LANDING USUALLY 8" PREFERENCE
STUCCO APPROX 2" APPROX 2"
TILE APPROX 2" APPROX 2"
STONE/BRICK VENEER APPROX 2" APPROX 2"
BRICK OR MASONARY NON VENEER CHECK MATERIAL SPEC
ITEM # QTY DESCRIPTION LENGTH1 2 L2x2x0.1875 472 2 L2x2x0.1875 393 6 L2x2x0.1875 374 3 L2x2x0.1875 345 1 L2x2x0.1875 256 2 BAR, FLT, 2x0.25 467 1 BAR, FLT, 2x0.25 388 2 BAR, FLT, 2x0.25 69 1 T2.00x1.50x0.75 3910 13 BOLT, 3/8 X 1"11 55 SCRW, SELF TAP #10 x 1 WH
5 4 3 2 1
Specification Sheet
The Cucina FamilyStand Hearth Dimensions Shipping Dimensions Weight
Cucina 60 39"w x 47"d x 39"h 48"w x 56"d x 15"h 370
Cucina 70 43"w x 51"d x 39"h 48"w x 56"d x 15"h 380
Cucina 80 46"w x 54"d x 39"h 48"w x 56"d x 15"h 390
Cucina 90 50"w x 58"d x 39"h 60"w x 68"d x 15"h 515
Cucina 100 54"w x 62"d x 39"h 60"w x 68"d x 15"h 525
Cucina 110 58"w x 66"d x 39”h 60"w x 68"d x 15"h 535
Fits withGiardino 60
Forno [email protected]
Cucina 70Modular Pizza Oven Stands
Pre cut 1/4" cement backerboards on sides
Pre cut 1/2" cement backerboard for steel reinforced hearth support. Hearth to be 1-5/8" with3/8" rebar
43"Stand Width
24"Opening
Height
25"Opening
Width
A
A
2
3
5
78
4
Add 2-1/4" per side forbacker board and min facade
see chart below
51"Stand Length
39"StandHeight
SECTION A-A
1
6
3
54
DETAIL BSCALE 1 : 12
19
Metal stand with cement backer board and concrete hearth
Pallet size and weight are45W x 53L x 15H @ 390 lbs
Works with Giardino60/Primavera60
Side Elevation
Specifications:
Stand includes metal frame, assemblyhardware, pre cut / pre-drilled exteriorcement backer board panels.
Front ElevationISO View
MADE IN THE U.S.A.
LAYOUT DRAWINGCUCINA 70
Opening designed for wood storage belowhearth
T-Bar is welded infor extra strength
OPTIONAL FACADES DEPTH WIDTHBRICK LANDING USUALLY 8" PREFERENCE
STUCCO APPROX 2" APPROX 2"
TILE APPROX 2" APPROX 2"
STONE/BRICK VENEER APPROX 2" APPROX 2"
BRICK OR MASONARY NON VENEER CHECK MATERIAL SPEC
ITEM # QTY. DESCRIPTION LENGTH1 2 L2x2x0.1875 512 2 L2x2x0.1875 433 6 L2x2x0.1875 374 3 L2x2x0.1875 345 1 L2x2x0.1875 256 2 BAR, FLT, 2 x .25 507 1 BAR, FLT, 2 X .25 428 2 BAR, FLT 2 X .25 8.09 1 T 2.00 x 1.50 x 0.75 4310 13 BOLT, 3/8 x 1"11 55 SCRW, SELF TAP #10 x 1 WH
5 4 3 2 1
Specification Sheet
The Cucina FamilyStand Hearth Dimensions Shipping Dimensions Weight
Cucina 60 39"w x 47"d x 39"h 48"w x 56"d x 15"h 370
Cucina 70 43"w x 51"d x 39"h 48"w x 56"d x 15"h 380
Cucina 80 46"w x 54"d x 39"h 48"w x 56"d x 15"h 390
Cucina 90 50"w x 58"d x 39"h 60"w x 68"d x 15"h 515
Cucina 100 54"w x 62"d x 39"h 60"w x 68"d x 15"h 525
Cucina 110 58"w x 66"d x 39”h 60"w x 68"d x 15"h 535
Fits withGiardino 70
Forno [email protected]
Cucina 80Modular Pizza Oven Stands
Pre cut 1/2" cement backerboard for steel reinforced hearthsupport. Hearth to be 1-5/8" with3/8" rebar
46"Stand Width
24"Opening
Height
25"Opening
Width
A
A
2
3
5
78
4
54"Stand Length
39"StandHeight
SECTION A-A
1
6
3
5
DETAIL BSCALE 1 : 12
19
Pallet size and weight are48W x 56L x 15H @ 390 lbs
Works with Casa2G80/Toscana80
Side Elevation
Specifications:
Stand includes metal frame, assemblyhardware, pre cut / pre-drilled exteriorcement backer board panels.
Front ElevationISO View
MADE IN THE U.S.A.
LAYOUT DRAWINGCUCINA 80
Pre cut 1/4" cement backerboard on sides
Opening designed forwood storage below hearth
Metal stand with cementbacker board and concrete hearth
Add 2-1/4" per side forbacker board and min facade
see chart below
T-Bar is welded infor extra strength
OPTIONAL FACADES DEPTH WIDTHBRICK LANDING USUALLY 8" PREFERENCE
STUCCO APPROX 2" APPROX 2"
TILE APPROX 2" APPROX 2"
STONE/BRICK VENEER APPROX 2" APPROX 2"
BRICK OR MASONARY NON VENEER CHECK MATERIAL SPEC
ITEM # QTY. DESCRIPTION LENGTH1 2 L2x2x0.1875 542 2 L2x2x0.1875 463 6 L2x2x0.1875 374 3 L2x2x0.1875 345 1 L2x2x0.1875 256 2 FLAT BAR, 2 x .25 537 1 FLAT BAR, 2 X .25 458 2 FLAT BAR, 2 X .25 9.59 1 T 2.00 x 1.50 x 0.75 4610 13 BOLT, 3/8 x 1"11 55 SCRW, SELF TAP #10 x 1 WH
5 4 3 2 1
Specification Sheet
The Cucina FamilyStand Hearth Dimensions Shipping Dimensions Weight
Cucina 60 39"w x 47"d x 39"h 48"w x 56"d x 15"h 370
Cucina 70 43"w x 51"d x 39"h 48"w x 56"d x 15"h 380
Cucina 80 46"w x 54"d x 39"h 48"w x 56"d x 15"h 390
Cucina 90 50"w x 58"d x 39"h 60"w x 68"d x 15"h 515
Cucina 100 54"w x 62"d x 39"h 60"w x 68"d x 15"h 525
Cucina 110 58"w x 66"d x 39”h 60"w x 68"d x 15"h 535
Fits withCasa2G 80, Toscana 80D, Toscana 80G, Toscana 80H
Forno [email protected]
Cucina 90Modular Pizza Oven Stands
Pre cut 1/4" cement backerboard on sides
Opening designed forwood storage belowhearth
Metal Stand with cementbacker board and concrete hearth
Pre cut 1/2" cement backerboard for steel reinforced hearthsupport. Hearth to be 1-5/8" with3/8" rebar
50"Stand Width
24"OpeningHeight
25"Opening
Width
A
A
Add 2-1/4" per side for backer board and min facade
see chart below
2
3
5
78
4
58"Stand Length
39"StandHeight
SECTION A-A
1
4
6
5
3
DETAIL BSCALE 1 : 12
T-Bar is welded infor extra strength
19
Pallet size and weight are52W x 60L x 15H @ 425 lbs
Works with Casa2G90/Toscana90
Side Elevation
Specifications:
Stand includes metal frame, assemblyhardware, pre cut / pre-drilled exteriorcement backer board panels.
Front ElevationISO View
MADE IN THE U.S.A.
LAYOUT DRAWINGCUCINA 90
OPTIONAL FACADES DEPTH WIDTHBRICK LANDING USUALLY 8" PREFERENCE
STUCCO APPROX 2" APPROX 2"
TILE APPROX 2" APPROX 2"
STONE/BRICK VENEER APPROX 2" APPROX 2"
BRICK OR MASONARY NON VENEER CHECK MATERIAL SPEC
ITEM # QTY. DESCRIPTION LENGTH1 2 L2x2x0.1875 582 2 L2x2x0.1875 503 6 L2x2x0.1875 374 3 L2x2x0.1875 345 1 L2x2x0.1875 256 2 FLAT BAR, 2 x .25 577 1 FLAT BAR, 2 X .25 498 2 FLAT BAR, 2 X .25 11.59 2 T 2.00 x 1.50 x 0.75 5010 13 BOLT, 3/8 x 1"11 65 SCRW, SELF TAP #10 x 1 WH
5 4 3 2 1
Specification Sheet
The Cucina FamilyStand Hearth Dimensions Shipping Dimensions Weight
Cucina 60 39"w x 47"d x 39"h 48"w x 56"d x 15"h 370
Cucina 70 43"w x 51"d x 39"h 48"w x 56"d x 15"h 380
Cucina 80 46"w x 54"d x 39"h 48"w x 56"d x 15"h 390
Cucina 90 50"w x 58"d x 39"h 60"w x 68"d x 15"h 515
Cucina 100 54"w x 62"d x 39"h 60"w x 68"d x 15"h 525
Cucina 110 58"w x 66"d x 39”h 60"w x 68"d x 15"h 535
Fits withArtigiano 80, Casa2G 90, Toscana 90D, Toscana 90G, Toscana 90H
Forno [email protected]
Cucina 100Modular Pizza Oven Stands
Pre cut 1/4" cement backerboard on sides
Opening designed forwood storage belowhearth
Metal stand with cementbacker board and concrete hearth
Pre cut 1/2" cement backerboard for steel reinforced hearthsupport. Hearth to be 1-5/8" with3/8" rebar
54"Stand Witdh
24"Opening
Height
25"Opening
Width
A
A
Add 2-1/4" per side for backer and min facade
see chart below
2
3
5
8 7
4
62"Stand Length
39"StandHeight
SECTION A-A
1
6
45
3
DETAIL BSCALE 1 : 12
19
Pallet size and weight are56W x 64L x 15H @ 425 lbs
Works with Casa2G100/Toscana 100
Side Elevation
Specifications:
Stand includes metal frame, assemblyhardware, pre cut / pre-drilled exteriorcement backer board panels.
Front ElevationISO View
MADE IN THE U.S.A.
LAYOUT DRAWINGCUCINA 100
T-Bar is welded in for extra strength
OPTIONAL FACADES DEPTH WIDTHBRICK LANDING USUALLY 8" PREFERENCE
STUCCO APPROX 2" APPROX 2"
TILE APPROX 2" APPROX 2"
STONE/BRICK VENEER APPROX 2" APPROX 2"
BRICK OR MASONARY NON VENEER CHECK MATERIAL SPEC
ITEM # QTY. DESCRIPTION LENGTH1 2 L2x2x0.1875 622 2 L2x2x0.1875 543 6 L2x2x0.1875 374 3 L2x2x0.1875 345 1 L2x2x0.1875 256 2 FLAT BAR, 2 x .25 617 1 FLAT BAR, 2 X .25 538 2 FLAT BAR, 2 X .25 13.59 2 T 2.00 x 1.50 x 0.75 54
10 13 BOLT, 3/8" x 111 65 SCRW, SELF TAP #10 x 1 WH
5 4 3 2 1
Specification Sheet
Fits withCasa2G 80, Toscana 100D, Toscana 100G, Toscana 100H
The Cucina FamilyStand Hearth Dimensions Shipping Dimensions Weight
Cucina 60 39"w x 47"d x 39"h 48"w x 56"d x 15"h 370
Cucina 70 43"w x 51"d x 39"h 48"w x 56"d x 15"h 380
Cucina 80 46"w x 54"d x 39"h 48"w x 56"d x 15"h 390
Cucina 90 50"w x 58"d x 39"h 60"w x 68"d x 15"h 515
Cucina 100 54"w x 62"d x 39"h 60"w x 68"d x 15"h 525
Cucina 110 58"w x 66"d x 39”h 60"w x 68"d x 15"h 535
Forno [email protected]
Cucina 110Modular Pizza Oven Stands
Specification Sheet
Pre cut 1/4" cement backerboard on sides
Pre cut 1/2" cement backerboard for steel reinforced hearthsupport. Hearth to be 1-5/8" with3/8" rebar
Opening designed forwood storage belowhearth
Metal stand with cementbacker board and concrete hearth
T-Bar is welded infor extra strength
58"Stand Width
24"OpeningHeight
25"Opening
Width
A
A
Add 2-1/4" per side forbacker board and min facade
see chart below
2
3
5
78
4
66"Stand Length
39"StandHeight
SECTION A-A
1
6
4
3
5
DETAIL BSCALE 1 : 12
19
Pallet size and weight are60W x 68L x 15H @ 425 lbs
Works with Casa2G110/Toscana110
Side Elevation
Specifications:
Stand includes metal frame, assemblyhardware, pre cut / pre-drilled exteriorcement backer board panels.
Front ElevationISO View
MADE IN THE U.S.A.
LAYOUT DRAWINGCUCINA 110
OPTIONAL FACADES DEPTH WIDTHBRICK LANDING USUALLY 8" PREFERENCE
STUCCO APPROX 2" APPROX 2"
TILE APPROX 2" APPROX 2"
STONE/BRICK VENEER APPROX 2" APPROX 2"
BRICK OR MASONARY NON VENEER CHECK MATERIAL SPEC
ITEM # QTY. DESCRIPTION LENGTH1 2 L2x2x0.1875 662 2 L2x2x0.1875 583 6 L2x2x0.1875 374 3 L2x2x0.1875 345 1 L2x2x0.1875 256 2 FLAT BAR, 2 x .25 657 1 FLAT BAR, 2 X .25 578 2 FLAT BAR, 2 X .25 15.59 2 T 2.00 x 1.50 x 0.75 5810 13 BOLT, 3/8 x 1"11 75 SCRW, SELF TAP #10 x 1 WH
5 4 3 2 1
Fits with
The Cucina FamilyStand Hearth Dimensions Shipping Dimensions Weight
Cucina 60 39"w x 47"d x 39"h 48"w x 56"d x 15"h 370
Cucina 70 43"w x 51"d x 39"h 48"w x 56"d x 15"h 380
Cucina 80 46"w x 54"d x 39"h 48"w x 56"d x 15"h 390
Cucina 90 50"w x 58"d x 39"h 60"w x 68"d x 15"h 515
Cucina 100 54"w x 62"d x 39"h 60"w x 68"d x 15"h 525
Cucina 110 58"w x 66"d x 39”h 60"w x 68"d x 15"h 535
Casa2G 110, Premio 100, Artigiano 100, Toscana 110D, Toscana 110G, Toscana 110H, Pompeii 90