Click here to load reader
Upload
ngodung
View
283
Download
0
Embed Size (px)
Citation preview
Instruments and implants approved by the AO Foundation
Modular Foot System
29899:29899 3/26/09 3:43 PM Page c1
Modular Foot System
The Synthes Modular Foot System provides implants and instruments specifically sized for fractures, osteotomies, replantations and fusions of small bones, including the foot and ankle.
29899:29899 3/25/09 5:48 AM Page c2
Features• Modules for 2.0 mm/2.4 mm, 2.7 mm
and 3.5 mm/4.0 mm plates and screws and for Kirschner wires
• Stainless steel implants for strength and ease of removal
• Self-tapping screws for easy insertion
• Anatomy-specific implants designed for foot procedures
• Low-profile plates reduce soft tissue irritation
• Cut-to-length plates minimize inventory
• Large graphic case holds all modules in the Modular Foot System
1
29899:29899 3/25/09 5:48 AM Page 1
2
2.0 mm LC-DCP Plates
Tapered ends for easy insertionHOLES LENGTH THICKNESS
4 27 mm 1.2 mm6 39 mm 1.2 mm8 51 mm 1.2 mm
2.0 mm/2.4 mm Foot Module Set [105.102]
2.0 mm Implants
2.0 mm T-Plate, 3 holes head,10 holes shaftLENGTH THICKNESS
65 mm 1.2 mm
2.0 mm Condylar Plates
• Fixed blades• Can be cut to create an oblique L-plate
HOLES LENGTH THICKNESS
Left 7 39 mm 1.2 mmRight 7 39 mm 1.2 mm
2.0 mm Cortex Screws, self-tapping
8 mm–40 mm (2 mm increments)HEAD THREAD CORE THREAD SIZE DIAMETER DIAMETER PITCH
3.5 mm 2.0 mm 1.4 mm 0.6 mm
29899:29899 3/25/09 5:48 AM Page 2
3
2.4 mm Condylar Plates
• Accepts a 1.8 mm Buttress pin to create a fixed-angle device
• Fixed bladesHOLES LENGTH THICKNESS
Left 8 57 mm 1.25 mmRight 8 57 mm 1.25 mm
2.4 mm T-Plate, 3 holes head, 10 holes shaftLENGTH THICKNESS
66 mm 1.2 mm
2.4 mm Cuboid Plate
Accepts 2.0 mm and 2.4 mm Cortex ScrewsTHICKNESS
1.2 mm
2.4 mm Implants
2.4 mm LC-DCP Plates
Tapered ends for easy insertionHOLES LENGTH THICKNESS
4 35 mm 1.7 mm6 51 mm 1.7 mm8 67 mm 1.7 mm
2.4 mm Cortex Screws, self-tapping
8 mm–40 mm (2 mm increments)HEAD THREAD CORE THREAD SIZE DIAMETER DIAMETER PITCH
4.0 mm 2.4 mm 1.7 mm 1.0 mm
2.0 mm
2.4 mm
29899:29899 3/25/09 5:48 AM Page 3
4
2.7 mm Foot Module Set [105.103]
2.7 mm LC-DCP PlatesHOLES LENGTH THICKNESS
4 37 mm 2.6 mm6 55 mm 2.6 mm
2.7 mm Condylar Plates
Fixed bladesHOLES LENGTH THICKNESS
Left 7 57 mm 1.5 mmRight 7 57 mm 1.5 mm
2.7 mm Calcaneal Reconstruction PlatesHOLES LENGTH THICKNESS
8 64 mm 2.5 mm9 72 mm 2.5 mm
2.7 mm Cortex Screws, self-tapping
10 mm–40 mm (in 2 mm increments)45 mm–55 mm (5 mm increments)
HEAD THREAD CORE THREAD SIZE DIAMETER DIAMETER PITCH
5.0 mm 2.7 mm 1.9 mm 1.0 mm
2.7 mm L-Plates, 3 holesLENGTH THICKNESS
Left 32 mm 1.0 mmRight 32 mm 1.0 mmOblique left 34 mm 1.0 mmOblique right 34 mm 1.0 mm
Quarter-Tubular Plates with collared holesHOLES LENGTH THICKNESS
4 31 mm 1.0 mm6 47 mm 1.0 mm
2.7 mm T-Plate, 3 holesLENGTH THICKNESS
32 mm 1.2 mm
2.7 mm Hind/Midfoot PlatesHOLES LENGTH THICKNESS
5 31 mm 1.2 mm8 45 mm 1.2 mm
2.7 mm
29899:29899 3/25/09 5:48 AM Page 4
5
3.5 mm/4.0 mm Foot Module Set[105.104]
One-Third Tubular Plates with Collared HolesHOLES LENGTH THICKNESS
4 49 mm 1.0 mm5 61 mm 1.0 mm6 73 mm 1.0 mm8 97 mm 1.0 mm
Calcaneal PlatesLENGTH THICKNESS
60 mm 1.2 mm70 mm 1.2 mm
Also Available
Calcaneal Plates accept 3.5 mm Cortex, 3.5 mm Cannulated and4.0 mm Cancellous Bone Screws. They may be used for eitherright or left calcaneus.
Calcaneal Y-PlateLENGTH THICKNESS
87 mm 2.0 mm
3.5/4.0 mm
29899:29899 3/25/09 5:48 AM Page 5
6
3.5 mm/4.0 mm Screw Set for Modular Foot System[105.106]
3.5 mm Cortex Screws, self-tapping
10 mm–50 mm (2 mm increments)55 mm–75 mm (5 mm increments)
HEAD THREAD CORE THREAD SIZE DIAMETER DIAMETER PITCH
6.0 mm 3.5 mm 2.4 mm 1.25 mm
4.0 mm Cortex Screws, self-tapping
24 mm–60 mm (2 mm increments)65 mm–95 mm (5 mm increments)
HEAD THREAD CORE THREAD SIZE DIAMETER DIAMETER PITCH
6.0 mm 4.0 mm 2.9 mm 1.25 mm
Washer, 7.0 mm*
For 3.5 mm and 4.0 mm screws
*outer diameter
4.0 mm Cancellous Bone Screws, partially threaded
30 mm–50 mm (5 mm increments)HEAD THREAD CORE THREAD SIZE DIAMETER DIAMETER PITCH
6.0 mm 4.0 mm 1.9 mm 1.75 mm
4.0 mm Cancellous Bone Screws, fully threaded
10 mm–40 mm (2 mm increments)45 mm–60 mm (5 mm increments)
HEAD THREAD CORE THREAD SIZE DIAMETER DIAMETER PITCH
6.0 mm 4.0 mm 1.9 mm 1.75 mm
29899:29899 3/25/09 5:48 AM Page 6
7
Kirschner Wire Implant Module [105.105]
Features• Various wire sizes (1.0 mm, 1.25 mm, 1.6 mm and
2.0 mm diameters) for a wide range of applications
• Multiple tip configurations for broad range of indications
• Metric-to-English diameter gauges for easy conversion and size identification
• Autoclavable protective caps color-coded for size identification
• Module size allows set to be sterilized in a small office autoclave
• K-wires made from implant quality 316L stainless steel
Various sizes and tip configurations
Metric-to-English diametergauges
Graphic case can accommodate 20 K-wires
per pocket
Color-coded to distinguish size(red=1.6 mm, blue=2.0 mm)
Ease of removal
Protective caps can be sterilized with module
1.0/1.25 mm
1.6 mm
2.0 mm
29899:29899 3/25/09 5:48 AM Page 7
8
Low profilePlates can be contoured foranatomic fit
Plates can be cut to length
Modular Foot System Instrument Set [105.101]
The insertion instruments are storedin a lightweight tray.
• Screwdrivers and blades
• Universal drill guides and double drill sleeves
• Depth gauges
• Bending and cutting pliers
• Screw and plate holding forceps
29899:29899 3/25/09 5:48 AM Page 8
9
Supplemental Instrument Set forModular Foot System [105.107]
The supplemental instrument traystores soft-tissue and fracturemanipulation instruments designed for the foot.
• Hohmann retractors
• Forceps
• Sharp hook
• Elevators
Hohmann Retractor, 8 mm, narrow tip, 215 mm [399.197]
Longer handle allows greater access to surgical site
90° Periosteal Elevator [399.361]
90° bend for tarsal fragment manipulation
Sharp Hook, small taper [319.391]
Hohmann Retractor, 8 mm, round tip, 215 mm [399.195]
Longer handle allows greater access to surgical site
29899:29899 3/25/09 5:48 AM Page 9
10
Modular Foot System, complete [105.100]
Graphic Case forModular Foot System
[690.354]
Modular Foot System, complete [105.100]consists of the following sets:
105.101 Modular Foot Instrument Set105.102 2.0 mm/2.4 mm Foot Module Set105.103 2.7 mm Foot Module Set105.104 3.5 mm/4.0 mm Foot Module Set105.105 Kirschner Wire Implant Module Set105.106 Screw Set for Modular Foot System105.107 Supplemental Instrument Set for
Modular Foot System
For additional information, please refer to the package insert.
29899:29899 3/25/09 5:48 AM Page 10
11
Modular Foot Instrument Set [105.101]
Tray and Lid
690.354.30 Modular Foot Instrument Tray690.354.50 Lid, for Modular Foot Instrument Tray
Instruments
310.972 Countersink, for 2.0 mm and 2.4 mm screws311.01 Handle, with mini quick coupling311.43 Handle, with quick coupling313.94.96 2.4 mm Cruciform Screwdriver,
with Holding Sleeve314.67.97 Cruciform Screwdriver Shaft,
with Holding Sleeve319.006 Depth Gauge, for 2.0 mm and 2.4 mm screws323.201 2.0 mm Universal Drill Guide323.202 2.4 mm Universal Drill Guide347.985 Screw and Plate Forceps391.962 Bending/Cutting Pliers391.963 Universal Bending Pliers
319.09 Depth Gauge, for 3.5 mm and 4.0 mm screws314.075 Hexagonal Screwdriver, 2.5 mm,
with Ergonomic Handle392.00 Bending Iron, for 1.25 mm, 1.6 mm,
2.0 mm Kirschner Wires314.08 Holding Sleeve (for 2.7 mm screws)314.09 Holding Sleeve (for 3.5 mm and
4.0 mm screws)391.82 Wire Bending Pliers, 160 mm312.20 2.0 mm Parallel Drill Guide and
Drill Sleeve323.26 2.7 mm Universal Drill Guide323.36 3.5 mm Universal Drill Guide312.401 4.0 mm/2.9 mm Double Drill Sleeve
36653:36653 12/31/09 9:55 AM Page 11
12
Supplemental Instrument Set forModular Foot System [105.107]
Tray and Lid
690.354.70 Supplemental Instrument Tray for Modular Foot System
690.354.80 Supplemental Instrument Lid for Modular Foot System
Instruments
399.481 Periosteal Elevator, 3 mm, curved blade,round edge
399.48 Periosteal Elevator, 3 mm, curved blade,straight edge
399.361 Periosteal Elevator, 90° blade,180 mm length
319.391 Sharp Hook, small taper, 152 mm length399.195 Hohmann Retractor, 8 mm, round tip,
215 mm length399.197 Hohmann Retractor, 8 mm, narrow tip,
215 mm length399.97 Reduction Forceps, with points, ratchet,
130 mm length398.96 Stagbeetle Forceps, 125 mm length399.94 Reduction Forceps, with points, ratchet,
174 mm length
29899:29899 3/25/09 5:48 AM Page 12
2.0 mm/2.4 mm Foot Module Set [105.102]
Also Available
310.141 1.5 mm Drill Bit, mini quick coupling, 65 mm†
310.201 2.0 mm Drill Bit, mini quick coupling, 65 mm†
317.861 1.8 mm Drill Bit, mini quick coupling, 80 mm†
317.871 2.4 mm Drill Bit, mini quick coupling, 80 mm†
† Intended for hand-drilling. Use with the Handle withmini quick coupling [311.01]
* Module can accommodate up to two of each plate style
Implants
201.638 – 2.4 mm Cortex Screw, self-tapping, 201.652 8 mm – 22 mm (2 mm increments),
4 ea.201.654– 2.4 mm Cortex Screw, self-tapping, 201.670 24 mm – 40 mm (2 mm increments),
3 ea.201.808 – 2.0 mm Cortex Screw, self-tapping,201.820 8 mm – 20 mm (2 mm increments),
4 ea.201.822 – 2.0 mm Cortex Screw, self-tapping,201.840 22 mm – 40 mm (2 mm increments),
3 ea.201.980 1.8 mm Buttress Pin, 30 mm, 3 ea.243.234 2.0 mm T-Plate, 3 holes head,
10 holes shaft, 65 mm243.584 2.0 mm LC-DCP Plate, 4 holes,
27 mm243.586 2.0 mm LC-DCP Plate, 6 holes,
39 mm243.588 2.0 mm LC-DCP Plate, 8 holes,
51 mm243.61 2.0 mm Condylar Plate, 7 holes,
left, 39 mm243.62 2.0 mm Condylar Plate, 7 holes,
right, 39 mm249.916 2.4 mm Condylar Plate, 8 holes,
right, 57 mm249.917 2.4 mm Condylar Plate, 8 holes,
left, 57 mm249.919 2.4 mm T-Plate, 3 holes head,
10 holes shaft, 66 mm249.921 2.4 mm Cuboid Plate249.924 2.4 mm LC-DCP Plate, 4 holes,
35 mm249.926 2.4 mm LC-DCP Plate, 6 holes,
51 mm249.928 2.4 mm LC-DCP Plate, 8 holes,
67 mm
Instruments
312.92 1.8 mm Threaded Drill Guide, 2 ea.310.16 1.5 mm Drill Bit, quick coupling,
110 mm, 2 ea.310.19 2.0 mm Drill Bit, quick coupling,
100 mm, 2 ea.310.520 1.8 mm Drill Bit, quick coupling,
125 mm, 2 ea.310.530 2.4 mm Drill Bit, quick coupling,
100 mm, 2 ea.
2.0 mm/ 2.4 mm Foot Module* [304.066]
13
36653:36653 12/31/09 9:57 AM Page 13
14
Implants
202.810 – 2.7 mm Cortex Screws, self-tapping202.845 10 mm – 45 mm, 3 ea.202.850 – 2.7 mm Cortex Screws, self-tapping202.855 50 mm – 55 mm, 2 ea.242.04 Quarter Tubular Plate with collared
holes, 4 holes, 31 mm242.06 Quarter Tubular Plate with collared,
holes, 6 holes, 47 mm242.204 2.7 mm LC-DCP Plate, 4 holes,
37 mm242.206 2.7 mm LC-DCP Plate, 6 holes,
55 mm242.31 2.7 mm L-Plate, 3 holes, left,
32 mm242.32 2.7 mm L-Plate, 3 holes, right,
32 mm242.33 2.7 mm L-Plate, 3 holes,
oblique left, 34 mm242.34 2.7 mm L-Plate, 3 holes,
oblique right, 34 mm242.41 2.7 mm T- Plate, 3 holes, 32 mm242.535 2.7 mm Hind/Midfoot Plate,
5 holes, 31 mm242.536 2.7 mm Hind/Midfoot Plate,
8 holes, 45 mm242.61 2.7 mm Condylar Plate,
7 holes, left, 57 mm242.62 2.7 mm Condylar Plate,
7 holes, right, 57 mm245.98 2.7 mm Calcaneal Reconstruction
Plate, 8 holes, 64 mm245.99 2.7 mm Calcaneal Reconstruction
Plate, 9 holes, 72 mm
Instruments
310.21 2.0 mm Drill Bit, quick coupling, 125 mm, 2 ea.
310.26 2.7 mm Drill Bit, quick coupling, 100 mm, 2 ea.
310.87 Countersink, for 2.7 mm Cortex Screws311.26 Tap for 2.7 mm Cortex Screws,
100 mm
2.7 mm Foot Module Set [105.103]
2.7 mm Foot Module Case[305.067]
29899:29899 3/25/09 5:48 AM Page 14
15
3.5 mm/4.0 mm Foot Module Set [105.104]
Implants
241.34 One-Third Tubular Plate, with collar, 4 holes, 49 mm, 2 ea.
241.35 One-Third Tubular Plate, with collar, 5 holes, 61 mm, 2 ea.
241.36 One-Third Tubular Plate, with collar, 6 holes, 73 mm, 2 ea.
241.38 One-Third Tubular Plate, with collar, 8 holes, 97 mm, 2 ea.
Instruments
310.23 2.5 mm Drill Bit, quick coupling, 180 mm, gold, 2 ea.
310.35 3.5 mm Drill Bit, quick coupling, 110 mm, 2 ea.
310.229 2.9 mm Drill Bit, quick coupling, 150 mm, 2 ea.
310.401 4.0 mm Drill Bit, quick coupling, 160 mm, 2 ea.
310.89 Countersink, for 3.5 mm Cortex and4.0 mm Cancellous Bone Screws
311.33 Tap for 3.5 mm Cortex Screws, gold, 180 mm
311.400 Tap for 4.0 mm Cortex Screws, 150 mm
311.34 Tap for 4.0 mm Cancellous Bone Screws, 110 mm
Also Available
241.61 Calcaneal Plate, 60 mm241.62 Calcaneal Plate, 70 mm241.65 Calcaneal Y-Plate, 87 mm
3.5 mm/4.0 mm Foot ModuleCase [305.068]
36653:36653 12/31/09 9:58 AM Page 15
16
Implants
Kirschner Wires, with trocar point, 150 mm,(10/pkg.)292.10 1.0 mm292.12 1.25 mm292.16 1.6 mm292.20 2.0 mm292.50 1.0 mm, trocar points on both ends292.52 1.25 mm, trocar points on both ends292.56 1.6 mm, trocar points on both ends292.58 2.0 mm, trocar points on both ends292.73 1.6 mm, with 15 mm thread length292.79 2.0 mm, with 15 mm thread length
Accessories
Protective Caps, (10/pkg.)392.178 for 1.6 mm Kirschner Wires392.179 for 2.0 mm Kirschner Wires
Also Available
392.177 Protective Caps for 1.0 mm and 1.25 mm Kirschner Wires (10/pkg.)
Kirschner Wire Implant Module Set [105.105]
Kirschner Wire ImplantModule Case [305.069]
29899:29899 3/25/09 5:48 AM Page 16
Implants
204.810 – 3.5 mm Cortex Screws, self-tapping204.875 10 mm – 75 mm, 3 ea.206.010 – 4.0 mm Cancellous Bone Screws, fully threaded206.060 10 mm – 60 mm, 2 ea.206.424 – 4.0 mm Cortex Screws, self-tapping206.470 24 mm – 70 mm, 3 ea.206.475– 4.0 mm Cortex Screws, self-tapping206.495 75 mm – 95 mm, 2 ea.207.030 – 4.0 mm Cancellous Bone Screws, partially threaded207.050 30 mm – 50 mm, 2 ea.219.98 Washer, 7.0 mm, 4 ea.
Instrument
319.97 Screw Forceps
3.5 mm/4.0 mm Screw Set for Modular Foot System[105.106]
Screw Rack for Modular Foot Set
[690.354.60]
29899:29899 3/25/09 5:49 AM Page c3
© 2003 SYNTHES (USA) LC-DCP and SYNTHES are trademarks of SYNTHES (USA). Printed in U.S.A. 1/10 J4260-D
SYNTHES (USA)1302 Wrights Lane EastWest Chester, PA 19380Telephone: (610) 719-5000To order: (800) 523-0322Fax: (610) 251-9056
SYNTHES (CANADA) LTD.2566 Meadowpine BoulevardMississauga, Ontario L5N 6P9Telephone: (905) 567-0440To order: (800) 668-1119Fax: (905) 567-3185
36653:36653 12/31/09 10:00 AM Page c4