Modul-ConnectVEHICLE ELECTRICS MADE SIMPLE

Integrated battery guard

Electronic fusing Low weight Reduced downtime

Flexible Water resistant Guaranteed for 2 years

Second life

BENEFITS WITH THE MODUL-CONNECT DIGITAL WIRING AND CONTROL SYSTEM

With Modul-Connect vehicle electrics are made simple. Thanks to ‘plug & play’ functionality, the system can be installed quickly and safely, without the need for experienced electricians or complex programming.

Modul-ConnectMODULAR, DIGITAL WIRING AND CONTROL SYSTEM

Example sketch of a vehicle wired up with Modul-Connect digital wiring and control system.

Modul-Connect is a modular, digital wiring and control system for light commercial vehicles. Using a unique digital signal to control all electrical components connected to the system, it allows multiple products to be powered and switched along a single cable simultaneously and with extreme reliability.

Because the system is modular, it can be tailored to suit every need. The modularity also makes it extremely flexible, and easy to adapt if the requirements change.

Modul-Connect comes with an inbuilt battery guard, which will protect the vehicle’s start capacity. It is also extremely resistant to dust and water (IP67). In addition, it is electronically fused to prevent accessories from breaking in the event of a short circuit. As it is a stand-alone solution, not connected to the vehicle’s CAN bus system, it will not be effected by, for example, software updates from the vehicle manufacturer.

In addition, it is lightweight. For customers who have a lot of electrical components in their vehicles, Modul-Connect can offer a significant weight reduction.

22029-03 60 15 42 0.0222040-03 500 20 25 0.08

22041-03 1000 20 25 0.10

22042-03 1500 20 25 0.16

22043-03 2000 20 25 0.20

22044-03 2500 20 25 0.24

22045-03 3000 20 25 0.28

22046-03 3500 20 25 0.32

22047-03 4000 20 25 0.38

22048-03 4500 20 25 0.42

22049-03 5000 20 25 0.46

22000-03 420 155 95 2.4

22040-032 500 20 25 0.08

22041-032 1000 20 25 0.10

22042-032 1500 20 25 0.16

22043-032 2000 20 25 0.20

22044-032 2500 20 25 0.24

22045-032 3000 20 25 0.28

22046-032 3500 20 25 0.32

22047-032 4000 20 25 0.38

22048-032 4500 20 25 0.42

22049-032 5000 20 25 0.46

22031-03 90 100 20 0.16

Modul-Connect base kit

MODUL-CONNECT BASE KITThe base kit consists of the products required to wire two warning beacons / a light bar, work lights and interior lights in a vehicle. All products are controlled by switches.

The system, which can easily be expanded, is electronically fused and has an in-built battery guard.

T-piece connectorCable assembly

CABLE ASSEMBLIES AND CONNECTORSThe plug & play cables are used for expanding the base system. The cables are connected using T-pieces, and are available in several lengths.

Cable assembly, unplugged

RF unit beacon / interior light / work lightREMOTE CONTROL

The RF unit enables you to turn beacons, interior lights and work lights on and off using a remote control. The remote will work from a distance of 50 meters.

22012-03 770 20 25 0.06

22015-03 560 20 25 0.06

22011-03 1370 40 40 0.12

22014-03 560 20 25 0.06

22010-03 1300 20 25 0.06

22013-03 560 20 25 0.06

22008-03 560 20 25 0.06

CONVERTERSElectronically fused converters, without the need for programming, which are used for connecting additional products to the Modul-Connect system. By using the compatible switch, it is possible to manage the component from a convenient location in the vehicle.

Handbrake switch converter

Cabin light converter

Inverter converter

Auxiliary socket converter

Battery guard warning buzzer

Hand wash converter

Interior light converter 4A

When more than 3A is needed for interior lighting

22021-03 50 15 30 0.06

22021-032* 50 15 30 0.06

22019-03 50 15 50 0.08

22019-032* 50 15 50 0.08

22016-03 50 15 75 0.1

22016-032* 50 15 75 0.1

22022-03 50 15 30 0.06

22022-032* 50 15 30 0.06

22020-03 50 15 30 0.06

22020-032* 50 15 30 0.06

22017-03 50 15 75 0.1

22017-032* 50 15 75 0.1

22023-03 50 15 30 0.06

22023-032* 50 15 30 0.06

22024-03 50 15 30 0.06

22024-032* 50 15 30 0.06

22025-03 50 15 30 0.06

22025-032* 50 15 30 0.06

22018-03 50 15 75 0.1

22018-032* 50 15 75 0.1

SWITCH PANELSSwitch panels with LED light are available in several configurations and with multiple panels. Plug & play installation and self-adhesive fixing makes them easy to install. For use together with the compatible converter. Please refer to our website for vehicle specific mounting brackets for the switch panels.

3-way switchBeacon/inverter/hand wash

1-way switchCabin light

2-way switchInverter/cabin light

3-way switchBeacon/interior light/work light

1-way switchHand wash

1-way switchInverter

1-way switchInterior light A, B & C

3-way switchInverter/cabin light/hand wash

* Unplugged * Unplugged * Unplugged

* Unplugged * Unplugged * Unplugged

* Unplugged

* Unplugged

21060-03 237 175 89 2.021040-03 218 152 66 1.1

21300-03 539 230 115 7.021200-03 414 230 110 5.2

21100-03 320 175 87 2.7

21000-03 64 25 50 0.14

Available autumn 2017

Power inverter 400W Power inverter 600W

The Modul-System inverters (≤ 1000W) have a display panel for battery status and load measurement, EU output socket/sockets and a USB port for charging USB devices.

Power inverter 1000W

Power inverter 3000WPower inverter 2000W

POWER INVERTERSBy using a power inverter, it is possible to run 230V equipment from the vehicle battery. We offer a range of high quality, pure sinewave DC to AC power inverters. All inverters feature a low battery alarm to prevent total battery discharge and overload and over-temperature shutdown to protect the inverter and the conversion.

Available autumn 2017

Remote switch, inverter

Not compatible with 3000W

21510-03 4000 - - 0.121500-03 210 46 123 2.0

22034-03 100 85 50 0.122033-03 55 89 50 0.1

BATTERY CHARGERSBy using a battery charger you ensure that your auxiliary battery bank is always properly charged. We install both DC-DC and AC-DC chargers. The Modul-System battery chargers are compatible with all light commercial vehicles, including those with smart alternators, regenerative braking technology and start/stop functionality.

Battery Charger DC-DC 30ARemote voltage monitoring and

temperature probe

POWER SOCKETS12V power sockets with surface mounted housing. The double socket comprises of one power socket and one USB socket with double output.

12Vdc power socket12Vdc power socket +

USB 5V 1A/2.1A

26051-03 350 155 90 2.326002-03 310 115 122 2.7

26004-03 376 140 150 4.5

26034-03 214 86 139 2.4 26050-03 - - - -

26012-03 - - - 3.3

26014-03 - - - 3.3

26040-03 82 37 12 -

HEATERSA heater will make sure that the vehicle is warm, even when the outside temperature is low. We offer both water and air heaters. The water heaters will pre-warm the engine / cabin, while the air heaters are suitable for warming up the load compartment / cabin.

Eberspächer Airtronic D2 & D4MSN Airtronic Vehicle Installation

D2/D4/D4+

Fuel pipe 2mm L=450Eberspächer Hydronic 2 Economy

D4S + U-kit + fuel pipe

U-kit Airtronic D2 & D4

Eberspächer EasyStart Timer

19790-03 343 238 88 3.0

19791-03 1137 238 88 8.5

19792-03 1269 238 88 9.5

19793-03 1401 238 88 11.0

LIGHTS & BEACONSBoth efficiency and safety can be improved with good lighting conditions. Our high-quality LED lights are specially designed for the vehicle’s cargo space, and have received all relevant accreditations, including the E mark. In addition to interior lights, we offer a wide range of beacons, light bars, work lights, etc.

Lightbar

19786-03 149 149 50 0.12

19787-03 149 149 90 0.23

19784-03 150 156 25 0.28 19785-03 149 149 30 0.08

19782-03 188 188 112 1.219781-03 149 149 112 0.5119780-03 149 149 112 0.51

Beacon adapter roof bar, low

Beacon adapter roof bar, high

Beacon adapter, flat Beacon adapter 3-1 point

Beacon with magnetic base, amber glass 12/24V

Beacon, white glass 12/24V

Beacon, amber glass 12/24V

19772-03 118 11 29 0,06

19775-03 136 25 15 0.08

19773-03 118 19 29 0.07 19774-03 150 30 35 0.13

19776-03 170 95 33 0.49 19760-03 160 60 70 0.45

19761-03 160 60 65 0.6 19763-03 110 60 139 0.75 19764-03 110 60 160 1.1

Strobe light, flat 12/24V

Strobe light, 135 degrees 12/24V

Strobe light for grill 12/24V

Strobe light, 180 degrees 12/24V

Strobe light, corner 12/24V

Work light 18W 12/24V

Work light with magnetic base 18W 12/24V

Work light 48W 12/24V

Work light with magnetic base 48W 12/24V

19701-03 334 38 13 0.1

19702-03 658 38 13 0.3

19703-03 982 38 13 0.4

19710-03 320 17 17 0.1

19711-03 482 17 17 0.1

19712-03 644 17 17 0.2

19713-03 968 17 17 0.2

19701-032 334 38 13 0.1

19702-032 658 38 13 0.3

Ambient/Workbench ligh

Drawer / shelf light

Ambient/Workbench light with switch

AMBIENT / WORKBENCH LIGHTSLED lights in robust design that are easily mounted on the vehicle ceiling or over a workbench. Thanks to the integrated constant current circuit, the LED brightness will not fluctuate with an increase/decrease in the battery voltage.

DRAWER/SHELF LIGHTSThe patented LED lights can be mounted either on a drawer unit or in a shelf. Thanks to the integrated constant current circuit, the LED brightness will not fluctuate with an increase/decrease in the battery voltage.

Co

pyrig

ht © M

od

ul-System

Ver. 11

.07

.17

MODUL-SYSTEM www.modul-system.com

ARC vehicles s.r.o.Strojírenská 259/16Praha 5 155 21

T: +420 604 740 455E: info@arcvehicles.czwww.arcvehicles.cz