Modern Hardness Tester

Modern Hardness Tester

MODERN HARDNESS Tester Series

Features

Standard Accessories

MHVS series of Vickers and Micro-Vickers is a new hi-tech Hard-ness Tester with unity of Advanced Touch Screen LCD with state of the art MCU, Precise Mechanical and Photoelectric Technologies, presenting Modern Vickers Hardness Tester.MHVS-50AT Vickers is designed for testing minute parts, thin samples or parts after surface coating. This is an ideal Hardness Tester for Research, Education Institutes, Factories, Laboratories, and Quality Departments.

MODEL Vickers MHVS-50AT

Load kgf: 1 5 10 20 30 50 N: 9.8 49 98 196 294 490

Hardness Mode Vickers (HV) or Knoop (HK)

Loading Mode Automatic (Loading, Holding, Uploading)

Load Generator Servo Motor - Load Sensor (close-loop system)

Turret Movement Automatic Rotating Movement

Magnification 100 X (Observation), 200 X (Measurement)

Load Holding Time (sec) 5 ~ 60

Min Measurement (μm) 0.01

Max Test Height (mm) 100

Max Test Width (mm) 150

Hardness Value Range 5 HV1 ~ 2500 HV50

Accuracy Conform to JIS B-7725, ASTM E-384, ISO/DIS 6507-2

Dim. W x D x H (mm) 300 x 520 x 580

Power Supply 1 ph, 220 V AC, 50/60 Hz

Weight (kg) 55

Eyepiece Lens 10X (1 pc) , Objective Lens 10X & 20X (2 pcs-1 each), X Y 100 x100 mm Test Bench (1 unit), Medium Bench Ø 60mm (1 unit), V-shape Bench (1 unit), Hardness Block (700-800) HV5, (400-500) HV10 (2 pcs-1 each), Round Leveller (1 pc), Adjustment Legs (4 pcs), Screw Driver (2 pcs), Bulb (2 pcs), Fuse (2 pcs), Power Cord (1 pc), User Manual (1 book), Cover (1 pc), Case (1 box)

Vickers Hardness Tester

Specification

Advanced Colorful Touch ScreenAutomatic Turret Rotating MechanismDisplay Testing Method, Testing Force, Measuring Indentation Length, Hardness Value and Loading Holding Time in Color LCD Touch ScreenSelectable Hardness scale HV and HK, Loading Weight, Holding Time Hardness values are direct displayed on Screen after readingAutomatic Hardness Conversion according to ASTM: HRA, HRB, HRC, HRD, HR15N, HR30N, HR45N, HR15T, HR30T, HR45T, HV, HK, HBWStored measuring and hardness data upto 100 testBuilt-In thermal printer to print testing result reportRS-232C Communication Interface for Auto Computer systemExpansion to further External Image Analysis

MHVS-50AT

HV-Measuring Software (optional):CMOS Camera (1 unit), Adapter Port (1 unit), i-Vision Software (1 pc), Calibration slide (1 pc)

MODERN HARDNESS Tester Series

Eyepiece Lens 10X (1pc) , Objective Lens 10X & 40X (2 pcs-1 each), Weight Shaft (1 unit), Weight (6 pcs), X-Y 100 x 100 mm Bench (1 unit), Thin Slice 0-7 mm Grip Bed (1 unit) Flat 0-30 mm Grip Bed (1 unit), Wire Ø0-5 mm Grip Bed (1 unit), Hardness Block (400-500) HV0, (700-800) HV1 (2 pc-1 each), Round Leveller (1 pc), Adjust-ment Legs (4 pc), Screw Driver (2 pcs), Bulb (2 pcs), Fuse (2 pcs), Power Cord (1 pc), User Manual (1 book), Cover (1 pc), Case (1 box)

Micro-Vickers Hardness TesterMHVS-1000AT

MODEL Micro Vickers MHVS-1000AT

Load gf: 10 25 50 100 200 300 500 1000 N: 0.098 0.245 0.49 0.98 1.96 2.94 4.9 9.8

Hardness Mode Vickers (HV) or Knoop (HK)

Loading Mode Automatic (Loading, Holding, Uploading)

Turret Movement Automatic Rotating Movement

Magnification 100 X (Observation), 400 X (Measurement)

Load Holding Time (sec) 0 ~ 60

Min Measurement (μm) 0.01



Hardness Value Range 5 ~ 2500 HV

Accuracy Conform to ASTM E-384, ISO 146, JJG 260-91, JIS B-7734

Dim. W x D x H (mm) 441 x 270 x 480


Weight (kg) 37

MHVS-1000AT is Micro-Vickers Hardness Tester, the most suitable for testing metal structures of small or minute parts, metal foils, fine drawn wires, thin hardened layers and electroplated layers as well as non-me-tallic materials such as glass, jewels, and ceramics.It includes the Knoop method suitable for continuous measurement at point quite close to each other or extremely thin plates that are hardly be measured by ordinary Vickers hardness tester.It is used widely in the aviation, automobile, shipbuilding, metallurgy, nonferrous metal, railway, machine tool etc.

Specification


HV-Measuring Software (optional):CMOS Camera (1 unit), Adapter Port (1 unit), i-Vision Software (1 pc), Calibration slide (1 pc)

Features

MHRS is a new hi-tech Rockwell Hardness Tester with unity of Ad-vanced Touch Screen LCD with state of the art MCU and Precise Me-chanical Technologies, presenting Modern Rockwell Hardness Tester.It performs rapid, accurate and reliable results, an ideal choice of testing Rockwell Hardness in industrial Machine - Heat Treatment Center, Laboratories, and Quality Departments for Ferrous, Non-Fer-rous, Hard Plastic dan Hard Rubber.

MODEL Rockwell MHRS-150Pre Load 10 kgf (98 N)

Load kgf: 60 100 150 N: 588.4 980.7 1471

Rockwell Scales HRA, HRB, HRC, HRD, HRE, HRF, HRG, HRH, HRK, HRL, HRM

Hardness Values Range HRA: 20-88, HRB: 20-100, HRC: 20-70, HRD: 40-77, HRE: 70-100, HRF: 60-100, HRG: 30-94, HRH: 80-100, HRK: 40-100, HRL: 50-115, HRM: 50-115

Operating Standard GB/T 230., GB/T 230.2, JJG 112, ASTM E18

Operating Interface Intuitive LCD Touch Screen

Indenter Diamond Cone Indentor, Ø 1.5875 mm Steel Ball Indenter



Dim. W x D x H (mm) 220 x 510 x 700


Weight (kg) 78

Rockwell Hardness Tester

Advanced Touch Screen for Easy OperationFifteen Rockwell ScalesAutomatic Preloading and LoadingHardness values are direct displayed on screen after readingAutomatic Hardness Conversion according to ASTM:HRA, HRB, HRC, HRD, HRE, HRF, HRG, HRH, HRK, HR15N, HR30N, HR45N, HR15T, HR30T, HR45T, HV, HK, HBWLight source adjustment on the screenStored measuring and hardness data upto 100 testBuilt-In thermal printer to print testing result reportRS-232C communication interface for Auto Computer system

MHRS-150

Specification

Diamond Rockwell Indenter (1 pc), Steel Ball Indenter Ø1.5875 mm (1 pc), Hardness Block (55-65) HRC, (20-30) HRC, (85-100) HRB (3 pcs - 1 each) , Large Bench Ø 150 mm (1 unit), Medium Bench Ø 60 mm (1 unit), V-Shape Bench (1 unit), Weight Set (1 set), LED Bulb (1 pc), Fuse (2 pc), Power Cord (1 pc), User Manual (1 book), Cover (1 pc), Case (1 box)


HBRVS is a new hi-tech Brinnel - Rockwell - Vickers Hardness Tester with unity of Advanced Touch Screen LCD with state of the art MCU, Precise Me-chanical and Photoelectric Technologies, presenting Modern Hardness Tester.This is multipurpose and multifunctional hardness with 3 modes: Brinell - Rock-well - Vickers, applies to wide application and materials: hardened steel, surface-hardened steel, hard alloy steel, cast iron, nonferrous metal, various tempering steel, hardened thin steel, and even including softer metal, surface-heat-treat-ment metal, chemical-heat-treatment metal etc. Commonly used in Industrial Machine - Heat Treatment Center, Laboratories, and Quality Departments.

MODEL Universal HBRVS-187.5Pre Load 10 kgf (98 N)

Load 10 ~ 187.5 kgf (98.07 ~ 1839 N)

Brinell load 31.25 kgf (306.5 N), 62.5 kgf (612.9 N), 187.5 kgf (1839 N)

Brinell scale HBW 2.5/31.25, HBW 2.5/62.5, HBW 2.5/187.5, HBW 5/62.5

Diamond indenter Diamond Rockwell Indenter, Diamond Vickers Indenter

Ball Indenter size (mm) Ø 1.5875, Ø 2.5, Ø 5

Rockwell load 60 kgf (588 N), 100 kgf (980.7 N), 150 kgf (1471 N)

Rockwell Scales HRA HRB HRC HRD HRE HRF HRG HRK HRH

Vickers load 30 kgf (294.2 N), 100 kgf (980.7 N)

Vickers scale HV30, HV100

Minimum Reading (mm) Brinell: 0.004, Vickers: 0.002

Magnification 37.5 X, 75 X

Maximum Test Height (mm) 170

Load holding time (sec) 2 ~ 60

Rockwell hardness range (HR) 20 ~100 (Accuracy: ± 0.1 HR, Repeatability: 0.5 HR)

Vickers hardness range (HV) 8 ~ 2900 (Accuracy (δ/%): ± 2, Repeatability (Hcf/%): ≤ 2.5)

Brinell hardness range (HBW) 8 ~ 650 (Accuracy (δ/%): ± 2.5, Repeatability (Hcf/%): ≤ 3.0)


Dim. W x D x H (mm) 215 x 530 x 820

Weight (kg) 100

Specification

FeaturesAdvanced Color Touch ScreenThree measuring modes: Brinell - Rockwell - VickersLoad can meet the requirements of various hardness measuringAutomatic loading, load holding and unloadingDirect Readout of Brinell - Rockwell - Vickers Hardness on Touch ScreenAutomatic Hardness Conversion according to ASTM:HRA, HRB, HRC, HRD, HR15N, HR30N, HR45N, HR15T, HR30T, HR45T, HV, HK, HBStored measuring and hardness data upto 200 testWide range of use and easy operationBuilt-In thermal printer to print testing result reportRS-232C Communication Interface for Auto Computer system

Eyepiece Lens 15X (1 unit), Objective Lens 2.5X & 5X (2 units-1 each), Carbide Steel Ball Indenter Ø1.5875, Ø2.5, Ø5 mm (3 pcs-1 each), Diamond Rockwell Indenter (1 pc), Diamond Vickers Indenter (1 pc), Hardness Block (55-65) HRC, (20-30) HRC, (85-100) HRB, (150-250) HBW 2.5/187.5, (400-500) HV30 (5 pcs-1 each), Large Bench Ø150 mm (1 unit), Medium Bench Ø60 mm (1 unit), V-Shape Bench (1 unit), Slip Bench with Plain & V-shape Bench (1 unit), Weight Set (1 set), Fuse (1 pc), LED Bulb (1 pc), Power Cord (1 pc), User Manual (1 book), Cover (1 pc), Case (1 box)

HBRVS-187.5 Universal Hardness Tester


Specification subjects to change without prior notice

SKN H

B XI/17

PT Ostenco Promitra JayaKomplek Ruko Cempaka Mas Blok D No. 2Jl. Suprapto - Jakarta 10640 - IndonesiaTelp. 021-42884548, 42884558, 42802050WEB: www.ostenco.co.id E~mail: [email protected]

Documents

Modern Hardness Tester