University of Windsor Scholarship at UWindsor Electronic eses and Dissertations 2001 Modeling of ﬂexible manufacturing tooling system with reliability considerations. Abdulfatah Ahmed. Altumi University of Windsor Follow this and additional works at: hp://scholar.uwindsor.ca/etd is online database contains the full-text of PhD dissertations and Masters’ theses of University of Windsor students from 1954 forward. ese documents are made available for personal study and research purposes only, in accordance with the Canadian Copyright Act and the Creative Commons license—CC BY-NC-ND (Aribution, Non-Commercial, No Derivative Works). Under this license, works must always be aributed to the copyright holder (original author), cannot be used for any commercial purposes, and may not be altered. Any other use would require the permission of the copyright holder. Students may inquire about withdrawing their dissertation and/or thesis from this database. For additional inquiries, please contact the repository administrator via email ([email protected]) or by telephone at 519-253-3000ext. 3208. Recommended Citation Altumi, Abdulfatah Ahmed., "Modeling of ﬂexible manufacturing tooling system with reliability considerations." (2001). Electronic eses and Dissertations. Paper 2754.

Modeling of flexible manufacturing tooling system with

Download PDF Report

Upload
others
View
1
Download
0

Embed Size (px)

Citation preview

Page 1: Modeling of flexible manufacturing tooling system with

University of WindsorScholarship at UWindsor

Electronic Theses and Dissertations

2001

Modeling of flexible manufacturing tooling systemwith reliability considerations.Abdulfatah Ahmed. AltumiUniversity of Windsor

Follow this and additional works at: http://scholar.uwindsor.ca/etd

This online database contains the full-text of PhD dissertations and Masters’ theses of University of Windsor students from 1954 forward. Thesedocuments are made available for personal study and research purposes only, in accordance with the Canadian Copyright Act and the CreativeCommons license—CC BY-NC-ND (Attribution, Non-Commercial, No Derivative Works). Under this license, works must always be attributed to thecopyright holder (original author), cannot be used for any commercial purposes, and may not be altered. Any other use would require the permission ofthe copyright holder. Students may inquire about withdrawing their dissertation and/or thesis from this database. For additional inquiries, pleasecontact the repository administrator via email ([email protected]) or by telephone at 519-253-3000ext. 3208.

Recommended CitationAltumi, Abdulfatah Ahmed., "Modeling of flexible manufacturing tooling system with reliability considerations." (2001). ElectronicTheses and Dissertations. Paper 2754.

http://scholar.uwindsor.ca?utm_source=scholar.uwindsor.ca%2Fetd%2F2754&utm_medium=PDF&utm_campaign=PDFCoverPages

http://scholar.uwindsor.ca/etd?utm_source=scholar.uwindsor.ca%2Fetd%2F2754&utm_medium=PDF&utm_campaign=PDFCoverPages

http://scholar.uwindsor.ca/etd/2754?utm_source=scholar.uwindsor.ca%2Fetd%2F2754&utm_medium=PDF&utm_campaign=PDFCoverPages

mailto:[email protected]