8
Procedia Materials Science 5 (2014) 1702 – 1709 Available online at www.sciencedirect.com 2211-8128 © 2014 Elsevier Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/3.0/). Selection and peer-review under responsibility of Organizing Committee of AMME 2014 doi:10.1016/j.mspro.2014.07.359 ScienceDirect © 2014 Elsevier Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/3.0/). Selection and peer-review under responsibility of Organizing Committee of AMME 2014

Modeling and optimization of EDM process 3

Embed Size (px)

DESCRIPTION

Modeling and optimization of EDM process 3

Citation preview

Page 1: Modeling and optimization of EDM process 3

Procedia Materials Science 5 ( 2014 ) 1702 – 1709

Available online at www.sciencedirect.com

2211-8128 © 2014 Elsevier Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/3.0/).Selection and peer-review under responsibility of Organizing Committee of AMME 2014doi: 10.1016/j.mspro.2014.07.359

ScienceDirect

© 2014 Elsevier Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/3.0/).Selection and peer-review under responsibility of Organizing Committee of AMME 2014

Page 2: Modeling and optimization of EDM process 3

1703 Shashikant et al. / Procedia Materials Science 5 ( 2014 ) 1702 – 1709

Page 3: Modeling and optimization of EDM process 3

1704 Shashikant et al. / Procedia Materials Science 5 ( 2014 ) 1702 – 1709

Page 4: Modeling and optimization of EDM process 3

1705 Shashikant et al. / Procedia Materials Science 5 ( 2014 ) 1702 – 1709

Page 5: Modeling and optimization of EDM process 3

1706 Shashikant et al. / Procedia Materials Science 5 ( 2014 ) 1702 – 1709

Page 6: Modeling and optimization of EDM process 3

1707 Shashikant et al. / Procedia Materials Science 5 ( 2014 ) 1702 – 1709

Page 7: Modeling and optimization of EDM process 3

1708 Shashikant et al. / Procedia Materials Science 5 ( 2014 ) 1702 – 1709

Page 8: Modeling and optimization of EDM process 3

1709 Shashikant et al. / Procedia Materials Science 5 ( 2014 ) 1702 – 1709