Model 5600-SI - Goldak Inc. · Automatic location of underground sub-structures (Cables, pipelines, conduits)! Locations achieved without inductive or conductive signal coupling!

http://nowvendors.com/osc/product_info.php?products_id=37






I N N O VAT I N G U N D E R G R O U N D L O C AT I N G

Model 5600-SI Pipe & Cable Locator

Achieve Pin-Point Accuracywith Goldak’s Rugged andHigh Performing 5600 Pipe& Cable Locator

Gun StylePipe Locator

Pipe & CableLocatorTransmitter

! Patented technology insures long distance tracing beyond competitive instruments

! Noise and static-free operation! Lighted tracking display! Operated with one control! Exceptionally powerful audio output! Defined signal coupling: Pipes and cables

in close proximity are easily separated! Outperforms competitive instruments

OUTSTANDING FEATURES

Equipped with

the patented

SI Super Induction

Antenna®

The Model 5600-SI offers the ulti-mate design in pipe and cable lo-cating equipment and far exceedsperformance levels of competitivemodels. This portable electronic in-strument is used extensively byutility companies such as gas, tele-phone, power, and cable televisionindustries, as well as municipalitiesand contractors. When working incongested and difficult areas, the5600-SI insures pinpoint accuracyand solves a wide variety of under-ground locating problems.

TEC

HS

PEC

S

Goldak, Inc.15835 Monte St., Unit 104 ! Sylmar, CA 91342818/367/0149 ! 818/833/7694 fax ! www.goldak.com

DIMENSIONSTransmitter: . . . . . . . . . . . . . 11” x 5” x 3.75”Receiver: . . . . . . . . . . . . . . . . 20.5” x 6.5” x 9”Carrying Case: . . . . . . . . . . . 20” x 16” x 8”

OPERATING WEIGHTReceiver: . . . . . . . . . . . . . . . . 3 lbs.Transmitter: . . . . . . . . . . . . . 2 lbs.

SHIPPING WEIGHT16 lbs.

OPERATING TEMPERATURE20° to 150° F

OUTPUT FREQUENCY116 KHz + 0.3%

BATTERIES8 each 1.5V “AA” Size Alkaline Batteriesfor Transmitter and Receiver

BATTERY LIFE30 Hours

AUDIO OUTPUTBuilt-In Speaker or Headphones

OPTIONAL ACCESSORIESGC-2 Inductive Clamp*8 Ohm Stereo HeadsetDuct Locating Transmitters“C” Cell Version available by special order

SONDES3310 . . . . . . . . . . . . . . . . . . . . up to 12 ft.3350 . . . . . . . . . . . . . . . . . . . . up to 12 ft.3330 . . . . . . . . . . . . . . . . . . . . up to 25 ft.SR-116k . . . . . . . . . . . . . . . . . up to 25 ft.SR-2116 . . . . . . . . . . . . . . . . up to 60 ft.

WARRANTYOne year on manufacturing defects and workmanship

TRAINING VIDEOS ARE AVAILABLE

5600 SI SPECIFICATIONS

*The Goldak GC-2 InductiveClamp improves versatility byenabling an operator to traceone or several lines within 5-1/4inch diameter. The operator mayenergize a line simply by plug-ging it into the direct output jackof the transmitter and clampingit around the line.


! Half the physical size of a standard split-box pipe and cable locator

! Virtually indestructible and maintenance free

! Built-in valve box and manhole locator! Incorporates lighted tracking display! Extended capability with 902 Sub-Scanner option! Extremely easy-to-operate


Experience theMost Rugged,Compact and Accurate Split-Box Pipe andCable Locator in the Industry.The miniaturized Model 902 is half the physical size of a standard split-box pipe and cable locator. Patentedtechnology and space-age plasticcompounds have enabled the manu-facturing of a virtually indestructiblelightweight instrument. This locatornot only accurately locates pipe andcable, but has a unique feature thatallows the user to locate metallic ob-jects at the touch of a button. Metal-lic objects include valve caps,manholes, and buffalo boxes. TheModel 902 features a lighted track-ing display, noise and static-free op-eration, single knob control, andautomatic low battery indicators. Re-member these exceptional qualitieswhich make the Model 902 the pipeand cable locator of choice.

Equipped with the patentedSI Super Induction Antenna®

FIELD TESTED TOUGH!

Model 902 Split-Box Pipe & Cable Locator

TEC

HS

PEC

S


DIMENSIONSTransmitter: . . . . . . . . . . . . . L 8.5” x H 6.5” x W 2.375”Receiver: . . . . . . . . . . . . . . . . L 8.5” x H 6.5” x W 2.375”

OPERATING WEIGHTTransmitter: . . . . . . . . . . . . . 2.5 lbs.Receiver: . . . . . . . . . . . . . . . . 2.5 lbs.

SHIPPING WEIGHT7 lbs.

OPERATING TEMPERATURE-5°F to 158°F-20°C to 70°C

OUTPUT FREQUENCY126 KHz

BATTERIES4 each “C” Size Alkaline Batteriesfor Transmitter and Receiver

BATTERY LIFE50 Hours

AUDIO OUTPUTBuilt-In Speaker Headphone Jack

SENSITIVITYManual Signal Adjust

OPTIONAL ACCESSORIESMini HeadsetGC-2 Induction ClampReceiver Carrying StrapLarge Protective Tote Bag with Full-SizeDirect Connection Cable902 Sub-Scanner

WARRANTYOne year on manufacturing defects and workmanship

902 SPLIT-BOX SPECIFICATIONS


902 Sub-ScannerSystem Complete

The Sub-Scanner used inconjunction with theModel 902 allows theuser to locate metallicpipe, cable and conduitwithout knowing the utili-ties origin. This unit is ex-cellent for locatingunmarked and unknownutility lines which are oftendamaged during excava-tion. It may also be usedas a metal detector to lo-cate valves, manhole cov-ers, valve caps and otherlarge masses to extremedepths.

FIELD TESTED TOUGH!

PIN-POINT LOCATING

! Compact andEasy-to-Store

! One-TouchAuto Tuning

! Fold-Out Design

! Automatic location of underground sub-structures (Cables, pipelines, conduits)

! Locations achieved without inductive or conductive signal coupling

! Reveals unmarked and unknown utility lines which are often damaged during excavation

! Available as an accessory or a complete system (Complete system includes model 902)


Pipe and Cable Locating with a Push-of-a-Button

Available as an acces-sory to any existing902 locator

AC

CES

SO

RIE

S


MODEL SDL-4

The Model SDL-4 Tracing Probe enables an operator to locate from a vertical posturewithout bending. The probe traces withease and allows precise locations by eventhe most inexperienced operators. There are minimal or no adjustment needed whilelocating. The exact placement of under-ground pipe or cable is indicated by a distinct null.

GC-2 INDUCTIVE CLAMP

The Goldak GC-2 Inductive Clamp improves versatility by enabling an operator to traceone or several lines within 5-1/4 inch diam-eter. The operator may energize a line sim-ply by plugging it into the direct output jackof the transmitter and clamping it aroundthe line.

SDL-6ME AND SDL-7NI:

The depth probe provides an accurate measurement of pipe and cable depths.Rugged, reliable, sensitive and simple touse, the depth probe will indicate depths to the nearest inch or centimeter.

! SDL-6ME: 5/8” diameter 6 feet in lengthmarked with centimeters and inches

! SDL-7NI: 3/8” diameter 6 feet in lengthmarked with inches only

OTHER OPTIONAL ACCESSORIES FOR MODEL 902

TRAINING VIDEOS ARE AVAILABLE 902 SUB-SCANNER SYSTEMWITH CASE

I N N O V A T I N G U N D E R G R O U N D L O C A T I N G

Model 600 Power Cable Locator

Easily Locate Power Lines With the Goldak 600...Great for Passive LocatingThe Model 600 cable locator is a portable electronicinstrument designed and used to locate and traceburied electrical cables. It does this by sensing theenergy radiating from current-carrying electrical con-ductors. No transmitting unit is used. Whether usedto trace the cables in a small rural electrical system,or used to sort out a network of primary and second-ary cables in a congested metropolitan area, theModel 600 proves to be accurate, dependable, andeasy to use.

! Designed with state-of-the-art circuit technology! 3-position detection antenna for pin-point cable

location and simple depth measurement! Durable, yet extremely light (less than 3 pounds)

for long-term operation! Foam-lined, rigid, carrying case available as

an option! Powered by easily-obtainable 9-volt battery! Used as a safety tool by water and gas crews

to locate power cables before digging or pipelinetrenching

! Function switch for “Peak” and “Null” operating modes

! Cushion- lined stereo headset

UNKNOWN PASSIVE LINE LOCATING

Lightweight design with easily distinguished“feed-through” response

TEC

HS

PEC

S


As the instrument responds only to radiated elec-trical energy it becomes particularly useful aheadof a trenching machine or in any digging opera-tion to warn the operator of buried electrical ca-bles. For this reason the list of users includes:electrical and pipeline contractors, municipal electric, street lighting, sanitation departmentpeople, power companies, gas companies, indus-trial plant maintenance personnel, airport andgolf course superintendents, and field crews fortelephone and cable TV installations.

With an operating weight of less than three pounds and a design that requires no delicate ad-justments, the instrument can be put into opera-tion quickly to produce positive, accurate results.

Locate, trace, and pinpoint direct-burial,energized, primary cableLocate, trace, and pinpoint energizedsecondary electrical cableLocate duct structures

Detect underground splice boxesLocate unmapped or unknown power cables before trenching or diggingLocate and trace conduit runs under concrete slabs containing wire mesh

MODEL 600 FEATURES & SPECIFICATIONS

MODEL 600 FIELD CAPABILITIES

Simple control panel makes the 600 easy to usefor all experience levels of locating personnel... be-ginner to expert.


Technologically Advanced Pipe andCable/Sonde LocatingSystem CompleteWith ULS Receiverand MultifrequencyTransmitter for AllLine and Sonde Locating Applications

TRIAD SERIES2310 ULSX

Light-weight, durable, and compactDigital Locating receiver for Utilityline(pipe and cable), passive line locat-ing, and sonde locating. Superior com-patibility with over 35 cataloguedfrequencies standard. Will automati-cally scan and tune to any cataloguedfrequency between 50Hz-200KHz.Complete with multi-frequency (9),10-watt capable tarnsmitting carry casefor conductive and inductive line energizing.

! Uncomplicated and intuitive user interface that simplifies and speeds up most locating jobs

! LCD screen offers visual display of intended target as well as audio response

! Visual response provides both location and orientation of desired line or sonde

! Search direction indicators, constant numericalresponse, automatic gain and set-up options

! Universal application as both receiver andtransmitter are compatible with other locators on the market

! Will automatically scan and syncronize to anycatalogued frequency between 50Hz -200KHz

! Receiver comes standard with over 35catalogued frequencies

! Receiver comes standard with 4 passive modes(high voltage mode optional)

! Automatic depth and accuracy reporting! Single trigger control! Lightweight and compact: Receiver just over

4 lbs./transmitter approximately 13 lbs.


Experience Industry’s Easiest to Use, Yet Most Powerful and High Performing Portable UnderGround Locator In Today’s Marketplace!

PRODUCTDESCRIPTION

Goldak, Inc. proudly introduces the new TRIAD digital Locator, whichwill surely become the industry standard in portable locators. TheTriad combines the versatility and power of a high-end multi-fre-quency system with an ultra-easy usability that is truly different. Whatmakes the Triad so unique?

RECEIVER:! Can operate with any continuous active transmitter frequency

ranging from low audio (such as 512Hz) up to radio frequencies (RF) as high as 200KHz.

! Can automatically scan and tune to active frequencies or be tuned at the user’s discretion.

! Intuitive audio/visual interface that is straightforward whether tracing pipes/cables, or locating coil-type transmitters (“sondes”).

! Features include: single-trigger control, automatic gain, and automatic set-up options.

! Outstanding features include: automatic depth read-out, constant numerical response, search direction indicators, passive-mode locating, and many others.

! Lightweight and ergonomically balanced packaging allows the user to work comfortably for long periods of time.

! Folds into a compact storage position about the length of a forearm.

TRANSMITTER:! Built into carrying case for compact storage or transport.! Conductive frequencies from 512Hz to 200KHz.! Dual output jacks to trace two facilities

simultaneously with different frequencies.! Patented super-inductor antenna outperforms

all others when tracing inductively.! Up to 10 watts of conductive output power

on demand.

TRIAD 2310

TRIAD 2310BY GOLDAK

It’s a easy as pushinga button

Screen displayshown with back-light turned on

PRODUCTAPPLICATIONS

As you approach the ener-gized line, the receiver willpresent an arrow icon indi-cating the direction fromwhich the signal is coming.

As you move closer toyour intended target youwill see the line begin toappear on either side ofthe display screen.

To pinpoint the utility sim-ply center the line imageinto the crosshairs and thedepth will appear automat-ically in the upper righthand corner.

! Line Tracing (pipes, cables, tracer wires, etc.)

! Passive Line Tracing (e.g., power cables and power return paths)

! “Sonde” Locating (coil-type transmitters, camera heads)

! Conduit locating/tracing

PRODUCTFEATURES

! Uncomplicated and intuitive user interface that simplifies and speeds up locating jobs

! Automatic tuning to desired transmitter from audio to 200 KHz

! Single-trigger control

! Constant absolute numerical signal response

! Automatic depth and accuracy reporting

! Unique search and pin-point graphics for both line tracing and “sonde” locating

As you approach the ener-gized sonde, the receiverwill present an arrow iconindicating the directionfrom which the signal iscoming.

As you move closer to thetarget sonde you will seeits image appear on eitherside of the display screen.

To pinpoint the sonde, sim-ply center its image in thecross hairs and the depthwill appear automaticallyin the upper right handcorner.

SONDELOCATING

TRIADUTILITY LINE/PIPE LOCATING

TEC

HS

PEC

S

TRIAD 2310BY GOLDAK

RECEIVERFrequencies: . . . . . . . . . . . . . . 50 Hz to 200 KHz (includes passive modes)(includes 4 passive modes: 60Hz Single Phase, 60Hz 3-Phase, Cathodic Protec-tion and Cable TV)Weight: . . . . . . . . . . . . . . . . . . . 4.4 Lbs.

Dimensions:Unfolded: . . . . . . . . . . . . . . . . . 36”L x 4”W x 10.5”HFolded: . . . . . . . . . . . . . . . . . . . 21”L x 4”W x 10.5”H

Display: . . . . . . . . . . . . . . . . . . . Graphic LCD with automatic backlightAudible Output: . . . . . . . . . . . . Built-in speaker and jack for optional headsetPower Supply: . . . . . . . . . . . . . 8 “AA” Alkaline batteries

STANDARD ACCESSORIESDirect Connection Cable (DCC)Ground RodOperating ManualAccessory Bag (with transmitting case only)

OPTIONAL ACCESSORIESHeadsetGC-2 Cable ClampAdditional Direct Connection Cable (DCC)Alternate Antenna AdapterExternal AC Power Supply (15 Watts)Car Battery Adapter80 Watt/Hour Rechargeable Flat BatteryWide Array of Sonde Transmitters

TRANSMITTER CASEStandard Frequencies:Conductive*: . . . . . . . . . . . . . . 512 Hz, 8KHz, 33 KHz,

65 KHz, 83 KHz, 116 KHz126 KHz, 131 KHz, 200 KHz

Inductive**: . . . . . . . . . . . . . . . 65 KHz, 83 KHz, 116 KHzWeight: . . . . . . . . . . . . . . . . . . . 10.5 Lbs.Dimensions: . . . . . . . . . . . . . . . 24”L x 4.5”W x 12.5”HInternal Supply: . . . . . . . . . . . . 8 “C” Alkaline BatteriesBattery Life: . . . . . . . . . . . . . . . 50 Hrs.***

Output Power (nominal:)With Battery: . . . . . . . . . . . . . . 3 WattsWith External Source: . . . . . . . 10 Watts

Operating Temperature: . . . . . -4° to +158° F (-20° to +70° C)

Notes:*Conductive frequencies are customizable to any value between 50 Hz and 200 KHz.**Inductive frequencies are customizable to any value between 8 KHz and 200 KHz.***Typical. Actual life will vary considerably with output load conditions.

TRIADSPECIFICATIONS


Documents

Model 5600-SI - Goldak Inc. · Automatic location of underground sub-structures (Cables, pipelines, conduits)! Locations achieved without inductive or conductive signal coupling!