LTM 1070-4.2Mobile craneMax. lifting capacity: 70 tMax. lifting height: 65 mMax. working radius: 48 m

LTM 1070-4.22

Mobile Crane LTM 1070-4.2Flexible and immediately operational

LTM 1070-4.2 3

A long telescopic boom, high capacities, an extraordinary mobility as well as a comprehensive comfort and safety configuration distinguish the mobile crane LTM 1070-4.2 from Liebherr. The 70-ton crane offers state of the art technology for more convenience for the practical operation.

•50mtelescopicboom

•16mdoubleswing-awayjib,optionalhydraulicallyadjustable

•65mhookheightwithtelescopicboomextensionandswing-awayjib

•48ttotalweightincl.10.7tcounterweightandswing-awayjibat12taxleload

•Greatoperationalflexibilityduetotopcapacitieswithfullandpartialcounterweights

•Chassiswidth2.55mwithtyres16.00R25

•Active,speeddependingrearaxlesteering

•Airoperateddiskbrakes

LTM 1070-4.24

Drivetrain

•6-cylinderLiebherrturbodieselengine270kW/367HPat2000rpm,max.torque 1700 Nm at 1100 - 1500 rpm

•AutomatedZF-gearboxAS-TRONIC,12 forward-, 2 reverse speeds

•2-stagetransfergearbox, crawl speed 0,53 km/h

•Axles3and4driven,optionalaxle1

346012520

3950

20°22°

2240

1004312340

8009

2550

4500

6300

R = 11790

R = 10900

R1 = 9730

7991

R = 3460

R = 3980

12 t 12 t 12 t 12 t16.00 R 25

LTM 1070-4.2 5

Most modern chassis and drive technology

Hydro pneumatic axle suspension„Niveaumatik“

•Maintenancefreesuspension cylinders

•Heavylayoutforaxleloads up to 40 t

•Springtravel+100/-100mm

•Highsidestabilityatcornering

•Choiceofthedrivingconditions by fix programs

Airoperateddiskbrakes

•Higherbrakingpower,betterbrakecontrol

•Improvedtrackstability

•Nobrakefadingathigheroperation temperatures

•Higherservicelife

•Shorterworkingtimeforchanging of the brake pads

•Brakepadswithwearindicators

High mobility and efficiency

Ahighperformance6-cylinderLiebherrturbodieselenginewith270kW/367PSprovidesfordynamicdrivingperformance.The12-speedZF-gearboxwithauto-maticgearchangesystemAS-TRONICgrantshighefficiencyandbestcomfort.

•Reducedfuelconsumptionduetohighnumberofgearsandhighdegreeofefficiency of the dry clutch

•Bestmanoeuvrabilityandminimumcrawlspeedbymeansofthe2-stagetransfer gearbox

•ABV-automaticblockingpreventerwithASRanti-slipcontrol

Compact, mobile and weight optimized

Due to its extreme compact design the LTM 1070-4.2 can also manoeuvre on the tightest job sites.

•Chassislengthonly10.43m

•Minimumturningradiusonly8.17m

•Chassiswidthonly2,55m,evenwithtyres16.00R25

•Tailswingonly3.46m

LTM 1070-4.26

5 Steering programs

•Programselectionbysimple push button

•Cleararrangementofthecontrol elements and displays

•Programschangeableduringdriving

•Crabsteeringcontrolledcomfortablyby the steering wheel

LTM 1070-4.2 7

Variable steering concept

Active rear axle steering

The rear axles are electro-hydraulically actively steered depending on the speed and the steering angle of the front axles.

5steeringprograms(P)arepreselectablebypushbutton.

•Distinctreductionofthetyrewear

•Improvementofthemanoeuvrability

•Stabledrivingperformancealsoathighspeeds

•All4axlessteerable

High safety standards – complete know-how from Liebherr

•Centringcylindersforautomaticstraighteningoftherearaxlesincaseoffailure

•Twoindependenthydrauliccircuitswithwheeldrivenandenginedriven hydraulic pumps

•Twoindependentcontrolcomputers

P1Roadsteering

The axles 1 and 2 are mechanically steered by the steering wheel. The axle 4 is actively steered depending on the speed and on the steering angle of the front axle. Above 30 km/h it will be adjusted to straight driving and fixed. Axle 3 is none steered for road driving.

P2All-wheelsteering

The axles 3 and 4 are turned by the steering wheel depending on the steering angle of the front axle to provide for the smallest turning radius.

P3Crabsteering

The axles 3 and 4 are turned by the steering wheel to the same direction as the steering position of axle 1 and 2.

P4Reducedswingout

The axles 3 and 4 are turned depending on the wheel turn of the front axles to minimize the back swing of the rear of the chassis.

P5 Independent rear axle steering

The axles 1 and 2 are steered by the steering wheel, the axles 3 and 4 are steered by push buttons independently from the steering an-gle of the axles 1 and 2

Centringcylindersattherearaxles

•Automaticstraightpositioningof the rear axles in case of failure.

LTM 1070-4.28

Thedriver’scab

•Corrosionresistantsteelplate execution, cataphoretic dip primed

•Allaroundsafetyglazing

•Tintedwindows

•Heatableandelectrically adjustable mirrors

•Aircushioneddriver’sseat with lumbar support

700

LTM 1070-4.2 9

Thecranecab

•Corrosionresistant,galvanizedsteel plate execution, powder-coated

•Allaroundsafetyglazing

•Tintedwindows,frontscreen can be opened

•Skylightwithbulletproofglass

•Cranedriver’sseatwithlumbarsupport

•Sidewiseextendablerunningboard

•20°tiltabletotherear

Cranesupporting– fast,comfortableandsafe

•BTT-BluetoothTerminal, mobile control and display device

•Electroniclevellingdisplay

•Fullyautomaticlevelling by push button

•Engine-start/stopand speed regulation

•Lightingofsupportarea with 4 integrated floodlights

•Strokeofsupportingcylinders front650mm,rear700mm

•Outriggers1-stage,fullyhydraulic, low maintenance extending system

Modern driving cab and crane cabThe modern driving cab as well as the backwards tiltable crane cab offer a com-fortable and functional working environment. The control elements and displays are arranged according to ergonometric factors. Thus a safe and fatigue-proof working is assured.

Fast and safe erectionThe supporting, the counterweight assembly as well as the mounting of the ad-ditionalequipmentaredesignedforspeed,safetyandcomfort.Forthesafetyofthe operating staff pedestals, hand holds and railings are provided.

Comfort and functionality

118246 8xm { mm } = ym { mm } = D{ mm } =

5BRE 5 0.03F{ m2 } =0.93U{ m } =

A0lweknw0LWE_CAD

1 1

2002/07/12

Blatt von

LTM 1070-4.210

Assemblyjib withhooktraverse

Hydraulicassemblysupport for attach-mentoftheswing-awayjibwithBTT

LTM 1070-4.2 11

The fully automatic telescoping system„TELEMATIK“

•Improvementofcapacitiesatlongbooms and large radii due to light-weight telescoping system

•1-stagehydrauliccylinderwith hydraulically operated drive pin

•Maintenancefreetelescoping

•Telescopingfullyautomatic

•Simpleoperation,supervisionof telescopingattheLICCONmonitor

Powerful, long telescopic boom and functional lattice extensionsThe telescopic boom consists of the base section and 5 telescopic sections, which can be comfortably and automatically extended and pinned to the requested length bythethousandfoldprovensinglecylindertelescopingsystemTELEMATIK.

•50mlongtelescopicboom

•9.5m–16mlongdoubleswing-awayjib,attachableat0°,20°,40°and60°

•Hydraulicadjustmentoftheswing-awayjibatfullloadfrom0°to60° (optional),interpolationofcapacities

•Roostersheave,foldablesidewise

•3.2mlongassemblyjib,consistingoftheswing-awayadapterand an additional set of sheeves or a hook traverse.

High capacities with full counterweight as well as with partial counterweight offer a wide applica-tion of operations

•Highlateralstabilityduetotheovalboomprofile

•Optimizedcapacitiesduetothenumerousextensionvariations

•Capacity6.7tat50mlongtelescopicboom

High capacities at the unpinned telescopic boom

•Hightelescopablecapacitiesduetointerpolation.

•Separatechartsforholdingofloadsatunpinnedtelescopiclengths

•DisplayatLICCONmonitor

High lifting capacities and flexible boom system

3,2mlongassemblyjib

Holding capacity

Unpinned telescopic length

Telescopablecapacity

LTM 1070-4.212

Mounting of counterweight – only a matter of minutes

•Multitudeofcounterweightvariationsfrom5.7tto14.5t

•Fastballastingwithkeyhole-technologyfromthecranecabin

•Compactcounterweightdimensions,at14.5tcounterweight only 2.55 m counterweight width

•Tailswingonly3.46m

•48ttotalweightincluding10.7tcounterweightanddouble swing-away jib at 12 t axle load

Variable counterweight

The hoist gear

•Hoistwinchwithinternalplanetarygearand spring loaded multi disk brake.

•Ropepull57kNattheouterlayer

•Max.ropespeed125m/min

•2.hoistgearoptional

12 t12 t

LTM 1070-4.2 13

With proven componentsThe drive components for the crane operation are designed for high performance and provide for sensitive and precise handling of the load. They are specially tuned for the crane operation and proved in severe long-term tests.

•Cranedrivefromdieselengineinchassis

•Optimizedfuelconsumptionbyelectronicenginemanagement

•Diesel-hydrauliccranedrive,openhydrauliccircuitswithelectric „LOADSENSING“-control,4workingmotionssimultaneouslypossible

•Electric/electronicSPS-cranecontrolviatheLICCON-computersystem

•Comfortablearmrestcontrolswith2self-centering4-foldmultifunctionaljoysticks,stepless control of all crane motions, with winch and slewing gear indicators

•Slewinggearstandardreversiblefromopentohydraulicallylocked,sothe slewing motion can be optimal adapted for the different operation conditions, e. g. sensitive for installation work or fast for cycle work

Powerful crane drive

The slewing gear

•Planetarygearbox,springloaded multi disk brake

•Reversibleopenorhydraulically locked as standard

•Slewingspeedfrom0to1.5min-1 infinitively variable

•6stagesbetween15%and 100%preselectable

The central greasing

•Standardcentralgreasingdevice for slewing bearing, boom bearing, luffing cylinder and winch bearing

•Evensupplyofgrease

•Fillingquantityvisibleatany time in transparent reservoir

Basiccounterweight 10.7tAdditionalcounterweight 3.8tTotal 14.5t

5 t

0.7 t

5 t

1.4t+1.2t

12 t12 t

1.2 t

LICCON-monitor

Controlsensorwithtouchdisplays

Controlunit

Telescoping cylinder

Luffing cylinder

Controlblock

HoistgearSlewing

gear

Hydraulicswivel

Geartypepump

Variabledisplacement pump

Liebherr diesel engine

Sensors

LTM 1070-4.214

TheLICCONtestsystem

•Fastlocatingoffailuresatthecomputerscreen without measuring equipment

•Displayoffailurecodesandfailure descriptions

•Comfortabledialogfunctionsfor supervision of all in and out terminals

•Displayoffunctionsandallocation of sensors and actors

LTM 1070-4.2 15

TheLICCONworkingrange limiting system (optional)

•Reliefforthecranedriverbyautomatic supervision of the working range boundaries like bridges, roofs etc.

•Simpleprogramming

•Fourdifferentlimitingfunctions: -Boomheadheightlimiting -Radiuslimiting -Slewinganglelimiting -Borderlimiting

TheLICCONworkingplanner(optional)

•Computerprogramforplanning,simula-tion and documentation of crane opera-tions at the computer

•Displayofallloadchartsbelongingtoaspecific crane

•Automaticsearchofasuitablecranebyinput of the load case parameters load, radius and hoisting height

•Simulationofcraneoperationswithdrawing functions and display of support forces

For functional and safe crane operation, the LICCON-computer system

The soft- and hardware of the mobile crane control is developed by Liebherr in house.ThecentralpointistheLICCON-computersystem(LiebherrComputedControlling).Thesystemundertakesextensive information,controlandsuper-vision tasks. The control components have proved themselves in the diverse climate conditions worldwide.

LICCON erection and operation program

•Operationprograms:

-Overloadlimiter(LMB)

-Erectionprogramwitherectiondisplay

-Operationprogramwithoperationdisplay

- Telescoping program with telescoping display

•Settingupoftheerectionstatusbycomfortabledialogfunctions

•Displayofallimportantdatawithgraphicsymbols

•Reliablecut-offatexceedingofthepermissibleloadmoments

•Winchdisplayforexacthoisting/loweringoftheloadwithincentimetres

The data bus technology

Liebherr mobile cranes are completely linked through the data bus system. All important electric and electronic components are equipped with own micropro-cessors and communicate over only a few data cables. For the special require-ments of the mobile cranes Liebherr has developed its own bus systems (LSB-Liebherr-System-Bus). The data bus system technology improves the reliability, the comfort and the safety of the drive and crane operation:

•Higherreliabilityduetomuchlesselectriccablesandcontacts

•Continuousselftestingofthe„intelligentsensors“

•Extensivediagnosispossibilities,fastfaultfinding

Intelligent crane control

Liebherr-WerkEhingenGmbHPostfach1361,89582Ehingen,Germany+497391502-0,Fax+497391502-3399www.liebherr.com,E-Mail:info.lwe@liebherr.com

PN189.00.E01.2009 Thepicturescontainalsoaccessoriesandspecialequipmentwhicharenotincludedinthestandardscopeofdelivery.Subjecttomodification

The new control generation - LICCON2

Colourmonitor

The readability of the data on themonitoroftheLICCON2control system in the crane cab is enhanced by the colour display. Warnings and crane utilization are considerably better recognized.

Supporting the craneBy use of the BTT the mobile cranecan be comfortably and safely sup-portedontheoutriggers.Enginestart/stop, speed regulation, electronic level display and automatic support level-lingareavailableasstandard.Option-ally also the supporting forces can be displayedontheBTT.

The new generation of the Liebherr crane control offers extended customer benefits and higher operational com-fort by additional possibilities of use. The base for this is the modern and future oriented control architecture with components, which are optimized regarding the comput-ing power as well as their capacities.

Touch-Displays

Belowthejoysticksintegrat-ed in the armrests the touch displays are installed, with which the various operational functions can be selected. This are beside others the drive and steering programs of the chassis, the axle sus-pension, the supporting of the crane, the adjustment of the working floodlights as well as heater and air condition controls.

Attaching and detach-ing of the hook blockTheBTT–Bluetooth terminal–offersthe crane driver the possibility to at-tach the hook block to or detach it from the front bumper within sight by remote control of the hoist winch and the luff-ing cylinder of the telescopic boom.

Wirelessremotecontrol(optional)