BELL INDUSTRIESBELL INDUSTRIESFABRICATING & MACHINE SHOP EQUIPMENT

SALE SITE – 1835 GRIMMET DRIVE – SHREVEPORT, LOUISIANA 71101

ANTIQUE CARS!MOBILE CRANE!

TUESDAY, JUNE 21st @ 10:00 A.M. CDTInspection: MONDAY, JUNE 20th FROM 8:00 A.M. – 4:00 P.M. CDT

28’VERTICAL2-5/8”

CAPACITY

<RANSOMEMODEL XHD TWIN

BERTSCH 10’ x 2-5/8” INITIAL PINCH BENDING ROLL

MODEL XHD TWIN BOOM-TYPEWELDINGMANIPULATOR

82”SWING

NEWELECTRICS

SWING

>BULLARD 74”

CUTMASTER VERTICAL BORING

MILL

Corporate Headquarters301 Post Office Drive, Suite C

Indian Trail, North Carolina 28079Toll Free 888.800.4442 704.821.4315 Fax 704.821.4325

www.asset-sales.com info@asset-sales.com

European HeadquartersUnit 7, Branxholme Industrial Estate, Bradford RoadBrighouse, West Yorkshire, HD6 4ES, England, UK

Tel 1484.401.906 Fax 1484.715.327peteraml@asset-sales.co.uk

Asset Sales (Canada) Inc.4310 Prospect Road

Bayside, Nova Scotia, Canada B3Z1L5Tel 902.852.5331 Fax 704.821.4325

gmuller@asset-sales.com

Asset Sales, Inc.PANGBORN WHEELABRATOR VERTICAL PLATE BLAST

AUCTION SALE DATE & TIME – TUESDAY, JUNE 21st @ 10:00 A.M. CDT

2-5/8”CAPACITY

BERTSCH 10’ x 2-5/8” INITIAL PINCH BENDING ROLL REAR VIEW OF BERTSCH 10’ x 2-5/8” INITIAL PINCH BENDING ROLL

BENDING ROLLS10’ x 2-5/8” BERTSCH Model 30 Initial Pinch Bending Roll, Interchangeable Top Rolls, Roll Length 10’-½”, TopRoll Dia., 26”, Bottom Roll Dia., 28”, Hydraulic Drop End, P & H Joy Stick Controls, Motorized Adjustment, RollPosition Readouts, S/N M-10404, New 1978.32’ SOUTHWARK Pyramid Bending Rolls, Overall Length Of Rolls 32’, Bending Capacity 26’ X 3/8”, Top RollDia., 24”, Bottom Rolls Dia., 15”, Air Drop End, Trolley Controls, (2) Lower Center Support Rolls, S/N 32860.12’ x ¾” BERTSCH Pyramid Bending Rolls, Manual Drop End, Top Roll Dia., 15”, Bottom Rolls Dia., 12”, CenterSupport, S/N 6824.10’ x 3/8” WEBB Initial Pinch Bending Rolls, Model 6l, Roll Dia., 9”, 8-16 FPM, Air Drop End, S/N 56144.54” x 10 Ga. Pyramid Bending Roll, 6” Dia., Roll, Manual Operation.

FIT-UP ROLLS32’SOUTHWARK PYRAMID 32’ BENDING ROLLS

ANGLE ROLLSBUFFALO #2, 6” x 6” x ½” Vertical Angle Rolls, Manual Roll Adj., Roll Dia., 16”, Roll Face 7 ¼”.

HENDLEY & WHITMORE 2” x 2” x ¼” Vertical Angle Rolls, Manual Adjustment, Up To 2 ¾” Pipe Capacity, (6) Sets Of Rolls.

S

45’ RANSOME Fit-up Rolls Contained Within Steel Frame.

1 OF 4ROLLS

SHEARCINCINNATI 12’ x ½” Mechanical Shear, Series 4312, 36” Gap., Roller TransfersIn Bed, Treadle Operated, 6’ RH Squaring Arm, S/N 23086.

PRESS BRAKESTEELWELD 16’ x ¼” Cap., 10’ X ½” Cap., Approx., 300 Ton, K5-12 MechanicalPress Brake, Overall Length Of Bed And Ram 14’ With 26” Permanent L. H. HornOn Bed And Ram, Distance Between Housings 12’ 5 ½”, Throat 18”, Height OfThroat 26”, Die Holder, 4-way Die, Stroke 5”, 20 SPM

BERTSCH 12’ x ¾” PYRAMID BENDING ROLLS, , y , ,

LARGE ASSORTMENT OF PRESS BRAKE DIES

POWER APRON BRAKEDREIS & KRUMP 8’ x ¼”, Model 186 Power Apron Brake, S/N 56304.

TANK TURNING ROLLS200 Ton ARONSON Power Roll, Triple Rubber Tires, Variable Speed, 120 TonARONSON Power And Idler Set With Rubber Tires, Variable Speed, (2) 80 TonRANSOME Power Rolls Double Rubber Tires Variable Speed (2) 80 Ton

2

WEBB 10’ x 3/8” WEB INITIAL PINCH BENDING ROLL

RANSOME Power Rolls, Double Rubber Tires, Variable Speed, (2) 80 TonRANSOME Power And Idler Sets, Rubber Tires, Variable Speed, 40 TonRANSOME Power And Idler Set, Mounted On Steel Frame, Variable Speed,Rubber Tires, 40 Ton RANSOME Idler Rolls, Rubber Tires, 40 Ton ARONSONPower And Idler Set, Rubber Tires, Variable Speeds, (2) 40 Ton RANSOMEPower Rolls, Rubber Tires, Variable Speeds, 40 Ton RANSOME Idler Rolls,Rubber Tires, 1000 Lbs Capacity Shop Made Pipe Power And Idler Set, VariableSpeed, Rubber Tires.

MISCELLANEOUS TANK TURNINGROLLS

MACHINERY INSPECTION DATE & TIMES – MONDAY, JUNE 20th FROM 8:00 A.M. – 4:00 P.M. CDT

BUFFALO #2 6” x 6” x ½” VERTICAL ANGLE ROLLS DRIES & KRUMP 8’ x ¼” POWER APRON BRAKEHENDLEY & WHITMORE 2” x 2” X ¼” VERTICALANGLE ROLLS

28’VERTICAL

CINCINNATI 12’ x ½” MECHANICAL SHEAR STEELWELD 16’ x ¼” CAPACITY 300 TON K5-12 MECHANICAL PRESS BRAKE

3>

<(2)

RANSOME MODEL 14 x 18

TRACK-TYPE BOOM

WELDING MANIPULATORS

AVAILABLE

MANIPULATORSRANSOME MODEL XHD TWIN BOOM-TYPE WELDING MANIPULATOR

WELDING MANIPULATORSRANSOME Model XHD Twin Boom Type Welding Manipulator, 28’ Vertical Travel,(1) Upper 30’L Boom With 24’ Travel, (1) Lower Boom With 102” Boom Travel,Stationary King Pin Base, Power Rotation, S/N 6314257.

(2) RANSOME Model 14 x 18 Track Type Boom Welding Manipulators With( ) yp g pTracks, 14’ Verticals, 18’ Horizontal Boom Travels, Na-5 Lincoln Welding Controls,1000 Amp Lincoln Power Sources, S/N 1235.

STEEL PLATE INVENTORY(9) PIECES of T-1 Steel Plate, Approximately 50,000 Lbs., 2” Thick, 43 ¼”W, 21’-24’ L.

WELDING POSITIONERSRANSOME 6000 Lb C it W ldi P iti V i bl S d R t ti 48”

RANSOME WELDING POSITIONER

3

RANSOME 6000 Lbs Capacity Welding Positioner, Variable Speed Rotation, 48”Square Table, S/N 5197

PANDJIRIS 3000 Lbs Cap., 30-6 Welding Positioner, Variable Speed Rotation,30” x 30” Table With 3-Jaw Gripper Chuck, S/N 800-5664-11.

P & H 2500 Lbs Cap., Welding Positioner, Variable Speed Rotation, 39” Dia Table.PANDJIRIS WELDING POSITIONER

(ABOVE) LARGE QUANTITY OF STEEL PLATE & MISCELLANEOUS CUT-OFF

<

PLATE BLASTPANGBORN #ES791c 70 Type CM Rotoblast VerticalPlate Blast, 4-wheel Design, Wheels Upgraded in 1976 to18 3 RGK S i dl D i Wh l (4) 30 HP 1800 RPM

AUCTION SALE DATE & TIME – TUESDAY, JUNE 21st @ 10:00 A.M. CDT

NEWELECTRICS

<PANGBORN WHEELABRATOR ROTOBLAST VERTICAL PLATE BLAST, 4-WHEELDESIGN

18-3 RGK Spindle Driven Wheels, (4) 30 HP, 1800 RPMMotors, Opening 48” X 120”H, Flush Floor Design, Equippedwith Dust Collection System, O.H. Trolley System With (2)Hoists, S/N ES791—591C70CM

SEAM WELDERSSHOP BUILT Horizontal Internal Seam Welder, HorizontalArm Travel 120”, Length Of Welding Boom 144”, 300 AmpPower Source And Lincoln Squirt Welder.

3 O’CLOCK Portable Seam Welder For Welding Tanks3 O CLOCK Portable Seam Welder For Welding Tanks.

Portable Double Seam Welder For Welding Tanks

WELDERS(6) 600 Amp LINCOLN Portable Gasoline Arc Welders, 600Amp LINCOLN R3S-600 Portable Mig Welder With WireFeed, (3) 600 Amp LINCOLN Idedarc DC-600 Arc Welders,(2) 600 Amp LINDE V1-600 Mig Welders With Wire Feeds,(5) 500 Amp LINCOLN R3R-500 Arc Welders, 400 AmpLINCOLN TM 400/400 Tig WelderLINCOLN TM-400/400 Tig Welder,400 Amp LINCOLN R3R Arc Welder, 400 Amp MILLERSRH-444 Arc Welder, S/N JA453109, (3) 300 Amp 5AE300LINCOLN Torpedo Welders, 300 Amp LINCOLN Tig300/300 Tig Welder, 300 Amp MILLER CP300 PortableWelder, (2) 300 Amp R3S300 LINCOLN Arc Welders, 250Amp AIRCO Portable Mig Welder, 250 Amp AIRCO ArcWelder, COBRAMETRIC Portable Mig Welder, (2)LINCOLN LN-7 Squirt Welders, NELSON Stud Welder

CIRCULATORY WELDING SHOP BUILT HORIZONTAL INTERNAL SEAM WELDER MISCELLANEOUS WELDERS

CIRCULATORY WELDING FIXTURE

WHIRLEY BIRD Circular Welding Fixture.

FLUX RECOVERY(2) INVINCIBLE Portable Flux Vacuums.

(2) BELT Flux Reclaiming Units For Sub Arc.

BURNING MACHINESBURNING MACHINES16’ X 75’ AIRCO Track Type Burning Machine, 16’W X 75’L Capacity, (4) Triple Torch Stations, Burning Table, Model 160 Exactograph.

10’ X 16’ CM 250 LINDE Track Type Burning Machine, Tracer Eye And Table, (6) Oxy Torches, (1) Plasma Torch, Burning Table.

GULLCO Track Burner With 120” Track, Burning Table.

(2) AIRCO Track Burners

MISCELLANEOUS WELDERS 200 TON HORIZONTAL HYDRAULIC WHEEL PRESS

(2) AIRCO Track Burners

JACKKNIFE Burning Machine With Table.

BANDSAWSJOHNSON 10” x18” Model J Horizontal Band Saw S/N H25609.

9” WELLS Horizontal Band Saw.

36” DO-ALL Vertical Band Saw, Welder/Grinder.^16’ x 75’ AIRCO

4

ABRASIVE SAW20” CONTINENTAL Chop Saw with Conveyor

WHEEL PRESS200 Ton Inclined Frame Hydraulic Horizontal Wheel Press,Swing Between Bars 48”, Work Length 110”

16 x 75 AIRCO TRACK TYPE BURNING MACHINE

Do-ALL 36” VERTICAL BANDSAW

<JOHNSON 10” x 18” MODEL J HORIZONTAL BANDSAW

WWW.ASSET-SALES.COM

VERTICAL BORING MILL74” BULLARD CutMaster, (2) Swivel Ram Heads, 74” T-slotted Table With Set Of(4) Faceplate Jaws, Max. Swing 82”, Max. Height Under Cross Rail 62”, Ram Travel30 ½” T bl S d T 60 RPM H d S i l 30 D C l t P 30 HP

MACHINERY INSPECTION DATE & TIMES – MONDAY, JUNE 20th FROM 8:00 A.M. – 4:00 P.M. CDT

82”SWING

30 ½”, Table Speeds To 60 RPM, Heads Swivel 30 Degrees, Coolant Pan, 30 HPAC Drive, S/N 22735

HORIZONTAL BORING MILLS5” GIDDINGS & LEWIS Table Type Horizontal Boring Mill, #350-T, 5” Dia-spindle,Taper In Spindle No. 6 M.T., Table Working Surface 48” X 98”, Table Cross Travel84”, Distance – Spindle To End Support Bearing 146”, Aux-spindle Diameter 2 ½”,Main Spindle Speeds To 375 RPM, Aux-spindle Speeds To 1500 RPM, HeadstockVertical Travel 60”, Tail Stock, Double Outboard Saddle Supports, Newall C80 3-axisD.R.O., 26” Diameter G&L Facing Head With Ring Gear Drive, Pendant, S/N 5116.D.R.O., 26 Diameter G&L Facing Head With Ring Gear Drive, Pendant, S/N 5116.

2 ½” GIDDINGS & LEWIS Model 25 Table Type Horizontal Boring Mill, No. 4 MT,24” X 24” Built-in Rotary Table, Facing Head With Ring Gear Drive, Tail Stock, S/N606

LATHES36” x 132” CC SIDNEY H. D. Engine Lathe, Swing Over Bed 37 ½”, Spindle SpeedsTo 427 RPM, Swivel Compound, 4-Jaw Chuck, Taper Attachment, Thread Dial,Aloris Tool Post, Steady Rest, S/N 6410

74” BULLARD CUTMASTER VERTICAL BORING MILL26” x 72” CC LEBLOND REGAL Hollow Spindle Lathe, Swing Over Bed 27”, 5”Dia. Spindle Bore, Hardened Bed, Speeds 16-1200 RPM, Taper Attachment, (2)Steadies, 4-Jaw Chuck, S/N 6HS379.

22” x 96” CC MONARCH Lathe With Hi-Pressure Hydraulic Deep Hole DrillingAttachment, Swing 24 ½”, 5 Speeds To 400 Rpm, 4-Jaw Chuck, Hardened BedWays, Taper Attachment, Pan And Coolant, S/N 16487.

22” x 264” CC MONARCH Lathe, Model 22” CM, Swing Over Bed 24 ½”, Speeds 9To 400 Rpm, (2) Carriages With Swivel Compound And Taper Attachments, 4-JawChuck, Rapid Traverse, Pan And Coolant, (3) Steady Rests, S/N 11156.

19” x 78” CC LEBLOND REGAL Lathe, 3” Spindle Bore, Inch/Metric Threading,Pre-select Headstock, Hardened Bed, Speeds To 1600 Rpm, Taper Attachment, 3-Jaw Chuck, Steady Rest, S/N 12E-727.

5” GIDDINGS & LEWIS TABLE TYPE HORIZONTAL BORING MILL

2 ½” GIDDINGS & LEWIS TABLE TYPE HORIZONTAL BORING MILL

<36” x 132” CC 36 x 132 CC SIDNEY H.D. ENGINE LATHE

>22” x 264” CC MODEL 22 CM 264”MONARCH

LATHE264

CENTERS

526” x 72” CC LEBLOND REGAL LATHE19” x 78” CC LEBLOND REGAL HARDENED BED LATHE 22” x 96”CC MONARCH LATHE

DEEP HOLE DRILLING

ATTACHMENT

AUCTION SALE DATE & TIME – TUESDAY, JUNE 21st @ 10:00 A.M. CDT

76”CENTERS

TL-5A MORI-SEIKI CNC TURNING CENTER TL-TB MORI-SEIKI CNC TURNING CENTER SL3H MORI-SEIKI CNC TURNING CENTER

#81-A MARVEL TILT FRAME VERTICAL BANDSAW BARNES SLIDING HEAD DRILL

CNC TURNING CENTERSTL-5A MORI-SEIKI CNC Turning Center, Swing 25”, 76” CC, 8-StationTurret, 12” Dia 3-Jaw Power Chuck, Auto Chip Conveyor, Fanuc 6T, S/N 946.TL-TB MORI- SEIKI CNC Turning Center, Swing 25”, 76” CC, 8-StationTurret, 12” Dia., 3-Jaw Power Chuck, Auto Chip Conveyor, Fanuc 6T, S/N699

4’ x 11” CARLTON RADIAL DRILL RIDGID PORTABLE THREADER

699SL3H MORI-SEIKI CNC Turning Center, 2 ¾” Bore, Tail Stock, 10-StationTurret, 10” Dia., 3-Jaw Chuck, Fanuc 6T Control, S/N 3636.SL3H MORI-SEIKI CNC Turning Center, 2 ¾” Bore, Tail Stock, 10-StationTurret, 10” Dia., 3-Jaw Chuck, Fanuc 3T Control, S/N 3685.

VERTICAL BANDSAW#81-A MARVEL Tilt Frame Vertical Band Saw, Capacity 18” x 20”, 1 ¼”Blade, 10’ Auto Stock Feed Table With (2) Vises, Power Lift Roller, Model A-7-M5, S/N E-2180.

TOYOTA 11000 LB CAPACITY FORKLIFT

<FMC 45 TON

KOMATSU 6800 LB CAPACITY FORKLIFTCan’t Attend the Sale? Still

Want to Bid? Visit Our W b it t

MISCELLANEOUS MACHINERY & EQUIPMENTPortable Sand Blaster, Sheet Lifter, Portable Maintenance Platform, 48” X 110” Transfer Car With RubberTires, (4) 36” Electric Floor Fans, Steel Plate Inventory With Racks, (8) Steel Welding Stands, MILLER

7 M5, S/N E 2180.

ROTARY SURFACE GRINDER36” HANCHETT Model 36 Vertical Rotary Surface Grinder, 36” Dia. Table, Segmental Chuck, 50 HP, S/N 36182.

TAP DISINTEGRATORModel 300 ELECTRO-ARC Portable Tap Disintegrator, 10 Amp Capacity , S/N 52885

RADIAL DRILL

FMC 45 TON LINK-BELT HT-450 MOBILECRANE

Website at and Check Out Our

Upcoming Auction Calendar! You Can Also Sign Up to

Receive Email Notifications by Joining Our Mailing List!

Portable Auto-wire Feed, Welding Rod Oven, Portable Air Tugger, Fork Lift Boom Attachment, Crane HeldFork Lift Attachment, (2) Dry Rod Storage Cabinets, Rail And (2) Swivel Ram Heads From 120” CINCINNATIHypro Vertical Boring Mill, Motorized Pump, Stainless Steel Pipe With Racks, GRACO Portable Pump, (5) 50Ton DUFF-NORTON Jacks

FORKLIFTS & MOBILE CRANE45 Ton FMC Link-Belt HT-450 Mobile Crane, Diesel, 96’ Power Loom, 25’ Jib, Cab, S/N 29G-459B11,000 LB CAPACITY TOYOTA Forklift, Gasoline, Dual-Mast, Twin Rubber Front Tires, Soft Tires, Model3F050, S/N 3F660100376800 LB CAPACITY KOMATSU Forklift, Gasoline

4’ x 11” CARLTON Radial Drill, T-Slotted Base with Tilt Box Table, No. 4 M.T. Speeds to 1500 RPM, Manual Clamp, S/N 1A1368

DRILLS24” BARNES 2-Spindle Sliding Head Drill, No. 5 MT, Production Table, Power Feed, Model 262

20” CAMEL BACK Drill

17” DELTA Drill

GRINDERS

6

5000 LB CAPACITY TCM Gasoline Forklift, Soft Tires

TURRET LATHES(5) No.5 WARNER & SWASEY Ram-Type Turret Lathes

SHAPER36” GOULD & EBERHARDT Universal Shaper

GRINDERS3” SELLERS Drill Grinder

16” D.E. Pedestal Grinder

THREADER2” RIDGID Portable Threader

MACHINERY INSPECTION DATE & TIMES – MONDAY, JUNE 20th FROM 8:00 A.M. – 4:00 P.M. CDT

ONLY4500MILES

ONLY

1961 ROLLS ROYCE SILVER CLOUD 2 1982 MASERATI QUATTRO PORTE SEDAN 1970 OLDSMOBILE NINETY EIGHT CONVERTIBLE

Can’t Attend the Sale? Still Want to Bid? Visit Our Website at www.asset-sales.comand Check Out Our Upcoming Auction Calendar! You Can Also Sign Up to Receive Email Notifications by Joining Our

Mailing List!

COMPLETELYREFURBISHED

ONLY1300MFG!

1951 PONTIAC SEDAN

EXCELLENT

TOOLING & MISCELLANEOUSHuge Amounts Of Tooling For #5 WARNER & SWAYSEY Ram Type Turret Lathes,Boring Mill Tooling, Boring Bars, M.T. Tooling, Tooling For Horizontal Boring Mills,Etc.

STEADY REST

1979 LINCOLN TOWNCAR

STEADY REST36” Diameter Capacity NOBLE & LUND 3 PT Steady Rest

TRUCKFORD Steel Flat-Bed Truck with BRADEN Power Winch, Jim Poles

AIR COMPRESSORS150 HP GARDNER DENVER Electra-Screw Rotary Screw Air Compressor,Enclosure And Skid Mount.30 HP INGERSOLL RAND Skid Mount Air Compressor.

ANTIQUE CARS1961 ROLLS ROYCE Silver Cloud 2, 4 Door Sedan, 8 Cylinder, Red Leather.1982 MASERATI Quattro Porte Sedan, Leather And Wood, (4500 Miles).1970 OLDSMOBILE Ninetyeight Convertible (Only 1300 Manufactured)1979 LINCOLN Towncar, Sedan, 50,000 Miles.1951 PONTIAC Sedan.

MISCELLANEOUS

7

MISCELLANEOUSIncluding: Steel Welding Tables, Back Vises, Fabricating Equipment, Burning AndWelding Supplies, Rubbing Rod, Welding Wire, Hand Tools, Power Tools, StorageCabinets, Plate Handling Equipment, Miscellaneous Material Handling, Hardware,Benches, Work Tables, Carts, Tank Turning Wheels And Frames, Shop Support,Etc.

Corporate Headquarters301 Post Office Drive, Suite C

Indian Trail, North Carolina 28079Toll F ee 888 800 4442 Di ect 704 821 4315

Asset Sales, Inc.

Toll Free: 888.800.4442  Direct:  704.821.4315Fax: 704.821.4325 – www.asset‐sales.com

Asset Sales, Inc. – Louisiana License #1464

GREATCONDITION

FMC 45 TON LINK-BELT HT-450 MOBILE CRANE

UPCOMING AUCTIONS UPCOMING AUCTIONS June 2nd – Rymac IndustriesPlastic Injection Molding & Tool Room – High Point, North CarolinaJuly 12th – Brass & Bronze FoundryBrass & Bronze Foundry Equipment – Irwin, PennsylvaniaJuly 19th – Remarque ManufacturingComplete CNC & Manual Machine Shop – Hampton Virginia

“LYNYRD SKYNYRD”MILWAUKEE IRON STREET SURVIVORREAL ESTATE FOR SALE

TO BE AUCTIONED AT 12:00 NOONMilwaukee Iron, Inc.

110 Ramsey Place – Lynchburg, Virginia 24501

DIRECTIONS – Leave Shreveport Regional Airport (SHV) to I-220 East toward Monroe for 6.5miles, Exit right on 7A, US71 (Market Street) for 1.5 miles, then turn left on Hearne Avenue andfollow for one block, then take a left on Grimmett Drive. Follow about 1000 ft and 1835 is on theleft and parking is in the field on the right.

HOTELS

Want to join our mailing list? Want to be included in Email Blasts announcing future auctions? Want to update your address? Curious to

preview machines and tooling featured in an upcoming auction? Want to request a brochure? Or want to be removed from our mailing list?

J t it th i f th b k f thi b h d il f it

Visit our website at www.asset-sales.com to view all of our Upcoming Auctions, Download Complete Brochures, or to

Register to Bid Online.

HILTON SHREVEPORT BEST WESTERN CHATEAU SUITE HOTEL SAM’S TOWN

MILWAUKEE IRON Chopper “Nuthin Fancy”, Fabrication by Gary Woodford, 2004 S & S 124 Engine, 2005 Baker 6Speed with Chrome Finish, 38 Degree Rake, 2005 Paughco Springer Suspension, 21” Avon 120 Front Wheel, 18”Avon 120 Rear Wheel – mfg. 2006

MILWAUKEE IRON Southern Steel, Fabrication by Randy Simpson, 2004 S & S Super Stock Engine, 38 DegreeRake, 21” Avon 120 Front Wheel, 18”Avon 300 Rear Wheel – mfg. 2006

MILWAUKEE IRON Rigid Chopper “Karn Evil”, Fabrication by Randy Simpson and Gary Woodford, 2004 S & S/ 96Engine, 2004 Baker Drive Train 6 Speed, 36 Degree Rake, Paughco Springer Suspension, 21” x 3 Avon FrontWheel, 16” x 5 Avon Rear Wheel – mfg. 2005

Just write the info on the back cover of this brochure and email or fax it to us at:

advertising@asset-sales.com or (704) 821-4325

PUBLIC AUCTION

HILTON SHREVEPORT104 Market StreetShreveport, LA 71101(318) 698-0900

BEST WESTERN CHATEAU SUITE HOTEL201 Lake StreetShreveport, LA 71101(318) 222-7620

ABBREVIATED TERMS & CONDITIONS OF AUCTIONSubject to amendments and modifications announced by the auctioneer at the time of the auction, anyperson participating in the auction shall be bound by the following terms and conditions. The auctioneerdoes not warrant the accuracy, authenticity, description, weight, count or measure of any listingsspecified herein.All articles will be sold to the highest bidder conforming to the bid process in accordance to the

SAM S TOWN 315 Clyde Fant ParkwayShreveport, LA 71101(877) 429-0711

PUBLIC AUCTIONEverything Must Sell

BELL INDUSTRIESFABRICATING & MACHINE SHOP

EQUIPMENT

g g pAUCTIONEER’S TERMS & CONDITIONS – COMPLETE COPIES AVAILABLE AT WWW.ASSET-SALES.COM. No article shall be removed unless paid in full and all articles purchased shall be removedin the time allocated by the auctioneer. No item, no matter how small or how far the purchaser has totravel, may be removed until the close of the auction sale.All payments shall be by way of cash, certified check, wire transfer and/or a company checkaccompanied by a bank letter of guarantee payable to Asset Sales, Inc. All bidding and invoicing will bein US Dollars ($). All bidders are responsible for all applicable taxes.Rigging/ Removal of sold equipment is the sole responsibility of the buyer and must be completed by theposted date. Rigging/Removal may not begin until payment has been made in full and the auction sale iscomplete. All heavy rigging will require a certificate of insurance for $1,000,000.00 naming Asset Sales,Inc as the insured

3

EQUIPMENT

SHREVEPORT, LOUISIANA 71101TUESDAY, JUNE 21st @ 10:00 A.M. CDT

Inc. as the insured.ALL SALES ARE FINAL, ON AN “AS IS – WHERE IS,” “IN PLACE,” “WITH ALL FAULTS” BASIS.A 13% Buyer’s Premium will apply to all onsite purchases and a 16% Buyer’s Premium for onlinepurchases.

REGISTRATION & BIDDING ONLINE:If you plan to bid with Bidspotter.com, you must be pre-approved by Asset Sales, Inc. The pre-approval process iseasy, but necessary. Asset Sales, Inc. will verify telephone number and confirm agreement to the Terms andConditions.

Anyone outside of the continental United States will be required to wire transfer a minimum deposit of $5000 to beapproved for all non-onsite bidding.